Renovation of Toilet Blocks 19 Nos in Vegetable Market H to N KWMC

Amount

Dismantling and Clearing away the existing Floor and wall, conveying and dumping the debris Stacking etc., all complete as directed by departmental officers.

Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Vegetable Market

Removing the existing doors and windows including removal of frames, hinges and fastenings carefully and stacking the same at site etc., complete.

Plastering with C.M 1:5 (1 of Cement and 5 of M-Sand) 15mm thick with fine river sand for plastering including scaffolding charges ,curing, neat finishing, etc., complete complying with standard specification and as directed by the departmental officers.

Dadooing Ceramic wall Tile 300mm x 600mm x8mm best approved quality and colour in all shade of the glazed tiles in all floor over a base layer in Cement Mortar 1:2 (1 of Cement and 2 of M-Sand)10mm thick and laid in situ true alignment and pointed neatly with colour cement suit the colour of the tiles fixed in position without any air gap in the tiles neatly etc., complete complying with standard specification and as directed by the the departmental officers. The Colour & quality of tiles should be got approved by the Executive Engineer before use in work.

Supplying and Laying the floor with antiskid ceramic tiles of approved quality, colour and design joint free of size 305x305x6 mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three M-sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. The colour & quality of tiles should be got approved by the Executive Engineer before use on work.

Supplying and fixing in position Indian Water Closet Oriya type of size 580 x 440mm white glazed earthen ware of approved quality with 'P' trap or 'S' trap conforming to IS:2556-part XII with sand cushion and forming flooring all-round the closet using 40mm broken brick jelly in lime concrete 1:2:5 (1 of lime, 2 of sand and 5 of brick jelly) 100mm thick and finishing the top to required slope and includingangle cock(S.O.R) with comprising the P-trap, C.P brass hinges and including all fittings, making the required size including cutting the wall, and fixing the flushing cistern properly, redoing the plastering and paking the wall with smooth finish, the side gap between EWC mouth and pan connector to be filled with silicon sealant etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Supplying and Fixing in position white glazed European Water Closet with P or S trap and double flapped seat cover, 10 litre capacity low level flushing tank including all internal fittings on CI brackets, 12mm brass nipple, chromium plated brown headed stop cock, 12mm nylon connection connecting with walls and floors including dismantling masonry and redoing the same to the original condition etc., complete complying with standard specification and as directed by the Departmental officers.

Supplying and Fixing in position best quality approved make white glazed earthernware Hand Wash Basin of size 550 x 400mm with a pair of cast iron brackets, including cost of 15mm dia metre brass chromium plated piller tap, 32mm dia metre G.M Wheel Valve, 15mm dia brass nipple 15mm dia nylon connection etc., including fixing the wash hand basin in the wall in position with pair of CI brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leakage etc., complete complying with standard specification. The quality and colour of wash hand basin and specials should be got approved by the Executive Engineer before use on work

Supplying and fixing in position of Indian make white glazed earthen ware lipped mouth flat back urinal of best approved quality with GI connection of suitable length 32mm bell mouth PVC connection 15mm dia GM wheel wall fixing the urinal in the wall position with necessary TW plug, clamps, screws, shellac etc., including the dismantling the masonry if necessary and redoing the same to its original condition fixing the 15mm dia GI pipe and wheel wall painting the pipe two coats of approved colour of synthetic enamel paint over one coat of primer and etc., and checked without leakage etc complete complying with standard specifications and as directed by Departmental Officers.

Supplying and Fixing in position PVC Screw Down Tap Heavy Type 15mm dia (Heavy Type) of approved make conforming to IS specification and quality including cost of shellac, thread, cutting and threading wherever necessary etc.,all complete complying with standard specification and as directed by the departmental officers.( Taps should be got approved by the Executive Engineer before use on the works)

Supplying and Fixing in position PVC Nahani/Floor Trap with PVC Grating type of size 100 X 75 mm with best quality gratings of approved brand fixed over a bed of brick jelly lime concrete 1:2:5 ,(One of Lime, Two of Sand and Five of Aggregate) brick jelly 40mm and finishing with CM 1:3 (One of Cement and Three of Sand) including dismantling masonry wherever found necessary and making good to the original condition and giving connection to the gully trapes etc., all complete complying with standard Specification and as directed by the Departmental Officers.

Supplying,laying and jointing CPVC Pipes of approved quality and best variety conforming to ISS with ISI mark, of the following Sizes above Ground level upto 4M height laid properly to alignment including cutting, threading and fixing the required CPVC specials but excluding the cost of such specials and fixing to the wall with necessary TW Plugs, Clamps and screws, making holes on the wall or drilling holes in the roof and making good dismantled portion to original condition with necessary brick work, concrete and plastering wherever necessary with necessary scaffolding charges etc., complete.

32mm dia pipe

25mm dia pipe

20mm dia pipe

Supplying and fixing in Position first quality and approved variety Gun Metal Gate Valve (Heavy Duty) with ISI Mark of approved quality of the following dia including cost of Shellac, thread, Labour Charges for cutting, threading, fixing in position etc., complete complying with standard specification and as directed by the Departmental Officers.

32mm dia Gate valve

25mm dia Gate valve

ABS DOOR / EQUIVALENT Specification: Providing of 35mm thick factory made pre laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work.

FOAMED PVC DOOR FRAME Specification: Providing factory made pre-laminated FPVC (Formed Polyvinyl Chloride) Door Frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 5mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3 Nos. to be provided for each vertical member, GI stiffeners of (‘U’ channel of size 29 x 9, 1mm, 150mm long) - 3 Nos. at hinge point, frame reinforcement of (‘U’ GI channel of size 46 x 22 x 0.6mm), bottom tie rod of (‘U’ GI channel size of 15 x 15 x 1mm), etc., complete complying with the standard specification. The door frame should be got approved from the Executive Engineer before use on work

Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping,clean removal of dirt. The rate includes cost of brushes,sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer(the colour and quality should be got approved by the Executive Engineer before use)

Providing and fixing in position vertically marble partition in the urinals with Raj Nagar marble stone of white hard, dense hemogenious colour without cracks, and fissures of size (3.0+2.0)5'height thickness varies from 18 to 20mm including making grew in the wall and pointing and packing with cement mortar 1:3 polishing, finishing on both sides etc., as directed at site.

Supplying and fixing Manhole Cover 60cm X 60cm (Heavy Duty) with Frame including labour charges, chipping the existing surface, cleaning, to fix the proper alignment etc., all complete and as directed by the department officers.

Supply and fixing in position best quality PVC Soil/ waste pipes of various size having ISI mark and providing leak proof joints including fixing to the wall with special PVC /MS clamps, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever necessary and making good the dismantled portion to the original condition, complying with standard specification etc., complete.

Cleaning the existing toilet wall using acid wash etc including cost of material and labour charcges etc., complete.

Eletrical items

Supply and Fixing of 20W 4' LED Tube Light with PVC unsheathed copper leads from terminals to the fitting. Including Switch (ISI Brand)

Conveyance of Earth/Debris to a lead of within 30 km from site as directed by the Engineer inculding loading, unloading, hire charges for vehicle and other incidental charges etc., all complete as directed by the Departmental Officers.