SPECIAL REPAIRS TO POINT WIRING AND DISTRUBUTION SYSTEM OF SENIOR SAILORS INLIVING BLOCK (MAHANADI) BUILDING NO T-40 AT INS CHILKA UNDER GE CHILKA

Amount

Taking down carefully copper / aluminium point wiring(light,fan,socket or power) complete along with fittings such as switches ,Sockets, ceiling rose , lamp holder ,tube light fittings and making good distrubed surfaces on walls etc.

M&L for point wiring with 1.5sqmm PVC insulated unsheathed multistranded single core copper cable of FRLS grade including one run of 1.5 sqmm PVC insulated copper cable as earth continuity drawn in surface PVC Casing-Caping not less than 20mm width with pressed steel in concealed MS box duly including covered with 3 mm thick hylem sheets for mounting switches/Sockets, accessories such as spacers, saddles, junction boxes for one light / fan point / Bell point/5 amp socket controlled by one switch.

All as per item No 2 above but, one socket outlet, three pin, 5/6 Amp on the same board with other switches

All same as per item No.2 above but with 2.5 sqmm PVC insulated unsheathed multistranded single core copper FRLS grade cable including one run of 2.5 sqmm PVC insulated copper cable as earth continuity for power socket on independent board.

M&L in repairs sub main wiring with 2 runs of 4 sqmm PVC insulated unsheathed single core copper cable multistrand 1100 V of FRLS grade with drawn in concealed PVC conduit not less than 25mm dia and one run of PVC insulated unsheathed single core multistrand copper cable of 4sqmm as earth continuity conductor drawn in PVC Conduit with accessories complete all as specified and as directed NOTE: 3 runs of 4 Sqmm and 1 run of conduit will be measured as one unit i.e RM (ii) Cutting,chasing,pinning are also included in quoted rate.

M&L in repairs sub main wiring with 2 runs of 6 sqmm PVC insulated unsheathed single core copper cable multistrand 1100 V of FRLS grade with drawn in concealed PVC Conduit not less than 25mm dia and one run of PVC insulated unsheathed single core multistrand copper core of 6sqmm as earth continuity conductor drawn in PVC Conduit with accessories complete all as specified and as directed NOTE:(i) 3 runs of 6 Sqmm and 1 run of conduit will be measured as one unit i.e RM (ii) Cutting,chasing,pinning are also included in quoted rate.

Supply and fixing of switch paino, flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed

M&L for switch socket out let 3 pin 5 Amps flush type, 230V complete all as specified and as directed

S&F Piano type switch socket combination 2 in 1, 3 pin, 5/15 Amps, 230V complete all as specified and as directed

S&F ceiling rose surface backlite 3 terminals 65X50mm 230V including PVC Box of size 3"X3" round type complete all as specified and as directed

S&F five stepped electronic socket type fan regulator as per site requirement complete all as specified and as directed

S&F of bell push, 5 Amp, 230Volt, complete all as specified and as directed

S&F of bell electric Ding Dong type, Ac 230 volts fixed complete all as specified and as directed

Taking down of existing serviceable light fitting and refixing the same light in existing place all as specified and directed.

S&F in repairs sheet metal enclosure with two pin and earth plug and socket complete with one MCB SPN 20 Amps 240 volts, 10 KA complete all as specified and as directed. Make:- L &T/Schneider/ABB

S&F in repairs MCB DB 08 way SPN with 200 A rated bus bar, 240 Volts, double door complete.all as specified and as directed. Make:- L & T/Schneider/ABB

S&F in repairs MCB DB 12 way SPN with 200 A rated bus bar, 240 Volts, double door complete.all as specified and as directed. Make:- L & T/Schneider/ABB

S&F in repairs MCB DB 04 way SPN with 200 A rated bus bar, 240 Volts, double door complete.all as specified and as directed. Make:- L & T/Schneider/ABB

S&F in repairs MCB DB 4 way TPN with 200 A rated bus bar,415 Volts, double door complete.all as specified and as directed. Make:- L & T/Schneider/ABB

S&F in repairs MCB SP 6 to 32 Amps 240 Volts, C curve, 10 KA Complete all as specified and as directed. Make L & T/Schneider/ABB

S&F in repairs MCB SPN 40 Amps, 'C' curve 240 Volts, 10 KA complete all as specified and as directed. Make:- L & T/Schneider/ABB

S&F in replacement LED retrofit lamp B22 holder base with polycarbonate body and aluminium heat sink of 09/10W including angle holder for bulb all as specified and as directed. Make : Wipro/Philips/ Crompton

S&F in replacement of MCB four pole 63 Amps 10KA 415V, 50 Hz, 'C' curve complete all as specified and as directed. Make:- L&T / Schneider/ ABB.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25M deep below ground level) with top edge of the plate not less than 1.5 M below ground level connected with galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron to earth test point all as specified or indicated including necessary excavation and earth work any type of soil PCC (1:3:6) type C-1 is chamber and 40mm thick RCC 1:2:4 type B-1 as in cover slab, reinforment with 8mm dia TMT bars @ 150mm C/C both ways, 15mm dia GI light grade pipe for earth lead protection and GI tubing 20 mm dia medium grade for watering funnel etc complete all as specified and directed and all as shown in electrical plate No.5 of SSR part 1.

Supply, laying and testing of XLPE under ground cable of size 120 Sqmm 3.5 core, 1100 volt grade, insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor including connection with lugs, gland etc. including taking down old unserviceable cable complete all as specified and as directed.

Supply, laying and testing of XLPE under ground cable of size 95 Sqmm 3.5 core, 1100 volt grade, insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor including connection with lugs, gland etc. including taking down old unserviceable cable complete all as specified and as directed.

Supply, laying and testing of XLPE under ground cable of size 70 Sqmm 3.5 core, 1100 volt grade, insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor including connection with lugs, gland etc. including taking down old unserviceable cable complete all as specified and as directed.

Supply, laying and testing of XLPE under ground cable of size 50 Sqmm 3.5 core, 1100 volt grade, insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor including connection with lugs, gland etc. including taking down old unserviceable cable complete all as specified and as directed.

Supply, laying and testing of XLPE under ground cable of size 25 Sqmm 4 core, 1100 volt grade, insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor including connection with lugs, gland etc. including taking down old unserviceable cablecomplete all as specified and as directed.

Supply, laying and testing of XLPE under ground cable of size 10 Sqmm 4 core, 1100 volt grade, insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor including connection with lugs, gland etc. including taking down old unserviceable cable complete all as specified and as directed.

Excavation in trenches not exc.1.5m wide and not exceeding 1.5m in depth and getting out in any type of soil for laying of underground cable (for making cable ducts & cable inside substation) complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick soil after repairing/jointing and laying and testing of cables complete all as specified

Removing excavated surplus soils meterial not exc.50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

Material and labour for natural river sand as cushioning of cables, including spreading and punning down all as complete all as specified and directed by Engineer in charge. Note : punned thickness shall be measured for payment purpose

Supply and laying fly ash brick of size 200x100x80mm locallly available as protection of cable in trenches complete all as specifed and as directed.

M& L for 80 mm dia GI pipe medium grade galvanised including fittings for cable protection and sealing both end including taking down old GI pipe completed all as specified and directed.

M& L for 50 mm dia GI pipe medium grade galvanised including fittings for cable protection and sealing both end completed including taking down old GI pipe all as specified and directed.

Material and labour for cutting existing road/PCC/drain for laying of underground cable and including necessary earth work and making good to match with the existing suraface with PCC 1:3:6 Type C1 using 20mm graded aggregates complete all as specified and as directed.

M& L for LT Out door end joint(Heat Shrinable) for under ground PVC insluated and PVC shearthed armoured heavy duty cables with aluminium conductor including jointing kit,including making joints for the cables of size 120 sqmmX3.5 core cables including testing complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25M deep below ground level) with top edge of the plate not less than 1.5 M below ground level connected with GI Strip 32X6 mm dia means of bolts nuts check nuts and washers of galvanised iron to earth test point all as specified or indicated including necessary excavation and earth work any type of soil PCC (1:3:6) watering funnel, GI tubing 20 mm for watering all as specified and directed and all as shown in electrical plate No.5 of SSR part 1.

Supply & Fix Garden light 25 watt LED light, IP65 New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source including PCC foundation for light as per site requirement with 1.5 m length GI pipe of 40 mm dia, Cable termination box and 01 no of MCB SP 6 Amp to each light and power cable 1.5 sqmm etc complete all as speficifed and directed by Engr-in-charge. Cat No:- CORALPT25WLED757PSYMTOPC of Make Havells or equavalent in Phillips/Crompton/Wipro

Supply and fixing in repair LED street light 35W, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection,6500 K, burning hour 50000 hr and impact resistance of IK08 complete all as specified and directed by Engineer-in-charge. Cat No:- BRP331 LED 42CWR5NPC PSUSI of Philips make or equavalent in Wipro/ Crompton Greaves

Supply and fix of exhaust Fans, steel body 300mm sweep with blades and frame and louvers, heavy duty, AC single phase, 230 volts including connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and as directed. Make :/Khaitan/Almonard/Crompton

Supply and fix of exhaust Fans, steel body 380mm sweep with blades and frame and louvers, heavy duty, AC single phase, 230 volts including connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and as directed. Make :/Khaitan/Almonard/Crompton

Supply and fix of Exhaust Fan made of sturdy Engineering Plastic complete with louvers shutter, voltage 230 V, 50 HZ, RPM 1200 copper winding of sweep 250 mm including connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and as directed. Make : Khaitan/Almonard/Crompton

PRASANTA KUMAR PANDA

BHARAT KUMAR BALL