15th Finance Commission Tied Grant Ist Installment 2023 24 Construction of 6 Seat New Community Toilet at Ward No09 Kolanthavalasu New colony in Kanjikovil Town Panchayat.

Amount

Earth Work is All Soils Except hard rock requiring plasting and conveynace for formation of bund with leed of 0 mtr to 100 mtr deploying earth moving mechinry and tippers including benching, formation of bunds, breaking clods, Sectioning etc., complete (for Hard Rock, Mediem Rock, dense Medium Rock not required Blasting (SR SI NO.86)

Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specifications.

Brick work in cement mortar 1:5 mix (one Cement, Five Sand) using good quality with fly Ash Bricks including cost and conveyance of all labour charges etc., complete

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.(SOR Item no.264,P.No.65)

Centering for sides and soffitts RCC slab (or) plane surface including strutting 3m height including cost and conveyance & all labour charges etc., complete Square Column

Footings & Plinth Beam

Roof Slab

Supplying fabricating and placing in position of RTS steel rods for reinforcement including the cost of steel and binding wire etc., complete and as directed by departmental Officers.

Rein foreced cement concrete 1:1½:3 mix using 20mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., to complete as per std., specification.

Plastering with cm 1:3 mix using 10 mm thick metal including cost and conveyance and all labour charges etc., complete

Plastering with cm 1:3 mix using 20 mm thick metal including cost and conveyance and all labour charges etc., complete

Plastering with cement mortal 1:5 mix using 12 mm thick including cost and conveyance of all materials to site and all labour charges etc., complete as per stand specification.

Finishing the top of flooring with granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete

Dadooing with Glazed tiles of 30cm x 30cm x 6mm of approved of make and quality and colour set in cm 1:2 mix and pointing with while cement heatly as directed.

Floor finishing with using best quality of Ceramic tiles of size 30cm x 30cm x 6mm over the base plastering cement mortar 1:3 mix, 20mm thick pointing with using white cement 4kg/10sq.mt. inculing cost and conveyance of all materials and all labour charges etc. complete

Supplying and fixing in position of Indian make white Glazer earth and water closet of size 50 cm 20 inches (Oriza Pan tipe with P or S trab and with sand cushion

Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with 'P' or 'S' trap and double flapped seat cover, 10.00 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition.

Supplying and fixing in position best Indian make colour glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications.

Supplying and fixing in position best Bevelled Edge MIRROR of 6mm thick of size 50cm x 40cm fibre glass shelf type with necessary plywood backing and rubber button, chromium plated screws, teakwood plugs, etc., complete complying with standard specification and as directed by the departmental officers.

Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications.

Collection, supply and filling with well gravel including cost and conveyance of all materials and stacking them at road side to departmental gauge for pre-measurement including all labour charges for filling etc., complete as per standard specification.

Supplying and fixing of M.S.grill of approved design for doors. Windows and ventilators using necessary mild steel flats for inner and outermembers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Painting two coats new iron work for doors, windows and ventilators using iron bars, window grills weld mesh screen in opt courtyard etc., with two coat synthetic enamel paint and approved quality and color including priming coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc., complete complying with standard specifications.

Supply and fixing 2000 ltr HDPE Tank including cost and conveyance of all materials to site and all labour charges etc., complete as per stand specification.

Wiring with 2x1.5(22/0.3) sqmm PVC insulated unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe concealed on wall and ceiling with PVC accessories in flush with wall with hylum sheet of 3mm thick cover with TW Switch box and 5A F.T switch with painting of suitable colour with continuous earth wireconnection of 14 SWG wire for Conceled Light point/fan point (For Electronic regulator)[SD NO 25 ]

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL. (SD 83)

Supply and run of 4 x 6 sq.mm.(56Nos/0.3mm.Dia) PVC insulated single core unsheathed copper conductor cable of 1100 V on 7/20 G.I. bearer wire for service connection mains (SD 68)

Supply and Run of 4 x 4 sq.mm(84/0.3) PVC insulated Sc unsheathed Cu.Conductor of 1100V grade in 25mm dia G.I pipe ("B"class) suitable bend at both ends with necessary angle iron up right and end supports for mains.SD-73)

Supply and fixing of 20W - 4ft LED fitting with LED with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.(TWAD-SOR:2022-2023)

Supply and fixing of 25W LED Street Light Fitting With LED complete with 19mm dia GI pipe (Class 'B') with 1 No. 19mm GI Bend complete on the existing post/wall with 16A aerial fuse unit on MS plate with PVC unsheathed Cu. leads, with MS clamps and aluminium painting.

Refilling the excavated excess earth including cost and conveyance of all materials to site and all labour charges etc., to complete as per std., specification.

Supplying and fixing in position of the following PVC / G.I pipes and specials best approved quality conforming to ISS and providing leak proof joint with PVC adhesive etc., complete complying with standard specification. 63mm HDPE Pipe PN 10

110mm PVC Pipe

32 mm PVC Pipe

Lowering PVC rigid/ HDPE pipes and specials to trench and laying to proper grade and alignment jointing with PVC couplers with cement paste and testing to the required pressure including conveyance of water for filling during testing etc.,Complete 63mm HDPE Pipe PN 10

110mm PVC Pipe

32 mm PVC Pipe

M M R CONSTRUCTIONS