S/R to MDR-18 to Tumandi road for 25-26.

Clearing & grubbing road land including uprooting rank vegetation , grass, bushes,shrubs, saplings & trees girth upto 300 mm, removal of stumps of such trees cut earlier & disposal of unserviceable materials by manual means & stacking of serviciable materials to be used or acutioned, upto a lead of 1000 m including removal & disposal of top organic soils not exceeding 150 mm in thickness as per technical specification clause 210 & as per direction of the Engineer-in-Charge.

Labour for scraping cleaning the road suface applying tack coat using 3.0 kg of bitumen for 10 Sqm and laying 37.5 mm thick built up spray grouting in one layer using 0.45 cum of 25 mm to 40 mm size hard granite metal and 12.00 kg penetration grade of bitumen for 10 sqm with 0.12 Cum of 12 mm size hard granite chips as key stone for 10 sqm spreading over and laying including heating pouring and spreading over and spreading bitumen metal and chips and rolling with PRR including hire and running charges of PRR and all other machineries but excluding cost and conveyance of bitumen ,metal and chips complete as per specification and direction of Engineer in charge.

Providing and applying tack coat using bitumen (60/70) @0.20 kg per sqm on the prepared bitumenous cleaned surface including cost of all materials, labour , T&P etc. complete as per the specification and direction of the Engineer-in-Charge.

Providing the road surface in the both sides of berm manually with approved quality of moorum including all labour charges for spreading, laying, levelling for the work including cost, conveyance, royality and taxes of all materials, finished item of works as per the specification and direction of the Engineer-in-Charge.

Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen,transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade,level and alignment and rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specification for road & Bridge works (4th Revision) with cost,conveyance,royality,including cost of all labour,T &P and cess required for the work complete in all respects as per direction of the Engineer-In-Charge.

Providing and fixing of typical citizen information board as per MORD specification and rawing. Three MS plates of 50 x 5mm thick, back plate duty welded with 75mm dia steel tubes back on edges as per drawings. The upper and lowe plate will be welded with MS flat iron frame of 50mm x 5mm. The steel tubes dully embeded in cement concrete M-15 grade blacksw of 600mm x 600mm x 750mm below ground level. All MS will be stove enameled on both side. Lettering and printing arrows, border etc will be painted with redimixed synthetic enamel paint of superor quality in required shade and colour. All selection of framed posts and steel tubes will be painted with primer and two coats of epoxupaint as per drawing Clause 1701 and Annexure- 1700.1.

Finishing wall surface two coats with any approved water proofing cement paint to outer wall surface after celaning surface including cost of paint watering curing with cost conveyance and taxes of all materials and labour with T&P and Cess required for the work etc, complete in all respect as per the direction of Engineer-in-Charge.

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC : 67 made of 1.5mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of rquired shade and colour supported and welded on 47mm x 47mm x 12 SWG sheet tubve firmly fixed to the ground by mean of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600mm, 600mm below ground level as per approved drawing Clause 1701.2.2 of MoRD and as per the direction of the Engineer-in-Charge

Reinforced cement cretate M15 grade Kilometer stone / local stone of standard design as per IRC : 8 fixing in position including painting and printing etc as per drawing and Technical specification Clause 1703 of MoRD. Ordinary Km Stone

200mm Stone (Precast)