Maintenance work with Attending Breakdown on 11/0.4 KV Feeders/Lines under the area of Kalyanpur and Ratanpur

Pole Work

Dismantling of X-Arm/L.T. brackets and insulators etc. from the damaged pole/pole to be replaced/shifted.

Excavation of damaged pole, pole to be replaced/shifted from the ground.

Strengthening of damaged pole by providing and welding of pipe or angle by overlapping in the place of damaged portion.

Loading, Carriage and unloading of poles from store to work site & vice versa.

Loading, Carriage and unloading of damaged poles from work site to store & vice versa.

Loading, carriage and unloading of PCC Pole from Store to Work site.

Grouting of pole with cement brick ballast and coarse sand as per Standard Specification.

Grouting of PCC Pole with Cement brick ballast and coarse sand as per standard specification.

Erection of Old/new Steel Tubular pole for H.T. O.H./ L.T. O.H. line and fitting of X-Arms/L.T. Brackets, insulators and other hardware fittings.

Erection of PCC Pole for L.T O/H Line and fitting of X-arms/LT Brackets, insulators and other hardware fittings. I suspension hooks

Making plinth of single pole of 400 mm dia, 600 mm height (200mm underground) with C.C. in ratio 1:4:8 of cements, stone ballast and coarse sand including cost of materials.

Erection of double pole structure including fixing of T.P.M.O. (if available) top channel, fuse set on fuse set channel etc. as per standard specifications.

Making plinth of Double Pole structure in size of 450x2250x600mm (200mm depth underground) with C.C. ratio 1:4:8 of cement, stone ballast and coarse sand including cost of materials.

Making of a double pole structure by erection a single pole with a specific distance from existing single pole on a running H.T. Line, fixing of T.P.M.O. (if available) (Top channel, fuse set channel etc. as per standard specification)

Erection of stud pole/fly stay and fixing of stay wire etc. for complete erection.

Fixing of stay rod and its erection by fitting of stay clamp. Stay wire and its proper binding and tightening etc.

Line Work (Conductor)

Unwinding Old jarjar wire for poles, lowering in down and making bundles of it.

Loading, carriage and unloading of conductor from store to work site and vice versa

Re-sagging of conductor, on old line after erection of pole, binding of conductor etc.

Laying, stringing, tensioning and binding of Weasel conductor for H.T./L.T. O.H.

Laying, stringing, tensioning and binding of Dog conductor for H.T./L.T. O.H.

Fixing of guarding angle/guarding channel for laying of guarding

Laying, stringing, tensioning & final sagging of Earth wire/G.I. wire

Cross lacing of guarding by G.I. wire (approximate 5 lacing of each span)

Opening of H.T. Jumpers from the existing 3 Phase 3 Wire H.T. O.H. line for erection work.

Opening of L.T. Jumpers from the existing L.T. O.H. line for erection work.

Making of H.T. Section points by brackets, clamps & Insulator, tightening of Line, binding of conductor & proper connection.

Making of L.T. Shackle point by brackets, clamps, G.I. Shakle strips and insulators, tightening of line, binding of conductors and proper connections.

Fabrication/modifications of M.S. Items as per requirement of site conditions.

Jumpering of H.T. Lines from the existing H.T.O.H. line.

Jumpering of L.T. Lines from the existing L.T.O.H. line.

Cutting of tree branches for normal clearance of H.T. as well as L.T.O.H. Lines.

Line Work (AB Cable)

Dismantling of Aerial Bunched Cable from L.T. O/H (damage) line.

Loading, carriage and unloading of Aerial Bunched Cable from store to work site and vice versa.

Laying of Aerial Bunched Cable for Erection of L.T. O/H Line.

Mounting & Erection of single phase distribution box.

Mounting & Erection of three phase distribution box.

Opening and reconnection of consumer connections for shifted/replaced of pole.

H.T. / L.T. Cable Work

Taking out new/old cable from cable drum and then after transportation from store to work site or vice-versa.

(a) H.T. Cable

(b) L.T. Cable

Digging of cable trench in size of 30 cm wide and 60 to 90 Cm meter deep as per site requirement for laying of cable-

(a) Normal Soil

(b) Kharanja Road

(c) Metallic Road

Laying of cable in the above digging, trench, covering with bricks, sand and back filling.

(a) H.T. Cable

(b) L.T. Cable

Laying of H. T. cable through Hume/C.I./MS. pipe in digged trench and back filling.

(a) H.T. Cable

(b) L.T. Cable

Taking out (old & used) H.T. cable by digging of trench from site and then rolling in to bundles.

(a) H.T. Cable

(b) L.T. Cable

Restoration of Metallic/RCC road after proper repairing with appropriate materials.

H.T. /L.T. P.B. & H.T./L.T. M.C. Work

Loading, carriage and unloading of H.T.M.C. from store to site or vice-versa.

Erection of H.T. metering cubical on plinth as per standard norms.

Construction of plinth for H.T. pilffer metering cubical.

Dismantling of H.T. pilfer metering cubical.

Erection of L.T. metering cubical as per standard norms and connection of L.T. Cable including crimping of Lugs etc.

Earthing of supports/ metering cubical/ HTPB etc. as per standard specifications.

Distribution T/F work

Construction of T/F plinth, suitable for mounting of distribution transformer. Size of the plinth will be 1.2 x 1.2 x 1.2 meter solid with brick work. 75 mm thick C.C. in ratio 1:4:8 with cement, coarse sand and brick ballast laid on the base and 75 mm thick done on all the exposed sides to the plinth.

Loading, carriage & unloading of distribution Transformers (Up to 630 K.V.A.) from store to site & vise-versa.

Erection of Distribution T/F on plinth/D/pole structure.

Connection of H.T. Jumper from fuse set to H.T. Busing of the transformer.

Fitting of L.T. D.B. by brackets & clamps on double pole structure & L.T. Cable Connection from T/F Cable to L.T.D.B.

Connection of L.T. cable from L.T.D.B to L.T.O.H.

To provide of Distribution T/F fencing of frame size 3x2.4 Mtr. including cost of M.S. Angle size 40x40x5 and M.S. Flat size 35x5, fixing of welded steel wire fabric on steel frames by welding of 10 SWG wire fabric, including Painting of two coats of paint on iron based surfaces with ready mixed paint to give bus green shade including cleaning of oil & dust.

Repairing Distribution T/F fencing with all Material and Painting of two coats of paint on iron based surfaces with ready mixed paint to give bus green shade including cleaning of oil & dust

Supply of 40mm dia Class 'B' G.I. Pipe 40' long including M.S. flat 50x6 mm along with all related materials required for distribution T/F earthing work and Boring 39' deep & connection of neutral bushing with G.I. Pipe through M.S. flat/earth wire with proper connection arrangement.

Disconnection of H.T./L.T. Lines, Shifting of T/F from ground to a safe place for construction of T/F plinth.

Shifting of T/F from ground to plinth and re-connection of H.T. L.T. Lines as well as earthing for proper completion.

Aishani Power Supply Pvt Ltd

AS Power

S.A. Enterprises