Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹21.9 LAccepted-AOC D 35 1ST FLOOR CLOCK TOWER HARI NAGAR NEW DELHI 110064 | WEST | DELHI | 110064 | 1 | Accepted-AOC LOWEST RATE | |
| 2 | 2₹22.0 L+₹12,865 (0.59%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹23.1 L+₹1.2 L (5.59%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹23.7 L+₹1.7 L (7.98%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹26.3 L+₹4.4 L (20.1%)Rejected-Finance | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹29.1 L
EMD Value
₹58,260
Closing Date
8 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF PALAM DELHI CANTT
GE AF PALAM DELHI CANTT-10
ADDN/ ALTN TO CERTAIN OFFICES IN CPRU AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT-10
2022_MES_562291_1
GENP-51/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE AF PALAM
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE AF PALAM
₹58,260
Yes
24 Apr 2023
10 Nov 2022
9 Dec 2022
10 Nov 2022
8 Dec 2022
25 Nov 2022
Amount
B/R PORTION Taking down cement plaster on brick/stone or concrete surfaces including raking out joints, hacking for key , scrubbing down with water complete.
M&L for 15 mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces including finishing even and smooth surface without using extra cement on wall.
M&L for 10 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces including finishing even and fair surface without using extra cement on wall using water proof compound. (NOTE: Water proofing compound should be measured and paid saperately)
M&l for two coat of plastic emulsion paint (interior) over a coat of primer over 3mm thick wall care putty after preparation of newly plastered surfaces on walls
M&L for 5 mm thick cement plater in cement mortar 1:3 in ceiling including finishing even and smooth surface without using extra cement.
M&L for preparation of newly plastered or unplastered surface of ceiling and .applying two coats of white wash all as specified.
M&L for preparation of newly plastered surface using necessary filling wall care putty to obtain smooth, regular / even finish using sand paper and applying two coats of Exterior Plastic emulsion paint over a coat of primer complete.
Supply only integral water proofing compound ISI marked.
Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and removing the debries from site to outside MoD land.
M&L for vitrified tile light shade10 mm thick of first quality (Square/rectuangular) polished, double charge shade, area of each tile exceeding 0.36 Sqm but not exc. 0.42 Sqm as in floors etc set and jointed with neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:6.
All as per item No 10 above but as in vertical surface such as skirting, dedo etc
M&L for vitrified tile light shade10 mm thick of first quality (Square/rectuangular) polished, double charge shade, area of each tile not exceeding 0.36 Sqm as in floors etc set and jointed with neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:6.
M &L for Non skid ceramic / printed tile of size 7 to 8 mm thick( square / rectangular ) area of each tile exceeding 0.06 Sqm but n. exec. 0.11 Sqm as in floor etc set and jointed with neat cement slurry and pointed with coloured cement to match tile over & including 15 mm thick screed bedding layer in cement mortar ( 1:4).
M&L for glazed ceramic coloured tile (colour & shade as approved by GE) of first quality of size 300x200x7mm thick in vertical surfaces as in skirting, dado etc set and jointed in neat cement slurry and pointed with coloured cement to match tile over 10mm thick rendering in cement mortar (1:4).
Dismantling wall and ceiling boards ( fibre , pulp,insulation etc.) or insulation boards / slabs / blankets , any thickness , including fillets all as specified
M & L for provding false ceiling of 15mm thick fine fissure board sharped finished mineral fiber accountic false ceiling tiles with back of the duly sanded and finshed with a coat of protective paint and front duly finished false system of size (600mmx600mm) having noise reduction co-efficient of 0.55 light reflection of 80% thermal conductivity k=0.057 W/WWC and humidity resistance of 95% fixed to true look PVC die KL -24 suspension system (Hot dipped galvanised steel section) of exposed T Section consisting of perimeter wall angle of size (24mmx24 mm) of thickness 0.45 of mm c/c universal main runner of T Shape with double rotary stitching of size 38mmx25 mm of lenght 1200mm made from 0.33mm GS steel of lenght 3.60 mtr to be spced at 600mmx 600mm size c/c cross runner T shape wtih double rotary stitching of size (30mmx24mm) of length 1200mm made 0.25mm thick GS sheet spaced @ 600mm c/c (600mmx 600mm) size complete all as specified and directed by Engineer -in- Charge.
S&F for 12mm thick Lafarge Gypsum board suspended Ceiling system (India gypsum make or its equivalent) with ISI grade GI framing of intermediate channel 15mmX45mmX15mm of 0.9mm, perimeter channel and ceiling angle 25mmX10mm section with connecting clip 2.64mm dia including all hardware i.e soffit cleat,rawl plug,edge bead,angle bead,nut &bolt drywall screws, hangers etc with all hanging accessories, cut out for provision of lighting, fixture and AC grills etc complete all as specified and directed by Engr-in-Charge.
Dismentling boarding of any description, fixed in any position with nails complete.
M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 for concealed timber fillet etc and making good cutting portion not exc 10 cm girth as in wall panelling.
S&F second class hardwood plain fillet square or rectangular in section, clean swan, secured with nails or brands of section exc 13 Sqcm but n.exc 25 Sqcm as in wall panelling.
S&F for 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed witrh screws to timber frame work in narrow widths n.exc 15 cm each rebated or flat edge as in wall panelling.
S&F for 6mm thick plywood grade BWP, type BB fixed with screws to timber frame work as in wall panelling.
S&F in repair wash hand basin, vitreous China, flat back, white of size 550mmx400mm including PVC waste coupling 32mm size, PVC waste pipe 32mm bore of adequate length, bracket of mild steel angle35mm x 35mm x 6mm size (one pair) including one CP mixer 15mm bore,one CP stop valve 15mm bore and one PVC connection15mm size with PTMT nuts and bolts of length 450mm long complete all as specified and directed by Engineer-in-Charge.Make:Cera/Hindware/Parryware for WHB, Parko/ Jaquar/ZIM for mixer/Stop valve, Polytuff/Prayag/Pearl for PVC Connection etc complete.
S&F in repair vitreour china EWC Super constellation including cistern of size 83x37x66 cm with 'S' trap complete. Cat Part No 20040 (S-10/P-9 of Make Hind ware or its equivallent in Parryware/Cera.
M&L in replacement of 100mm Cast iron floor/nahani trap with grating including jointing in any type of floor and making good in cement concrete type B-1 (1:2:4) and testing after repair complete all as specified.
S&F in repair brass chromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete.
Taking up or down 15mm bore steel tubing and connections in walls, ceilins, floors etc including cleaning for refixing complete.
M&L for GI tubing,15mm bore `medium grade` with all fittings and fixed complete to wall and ceiling or laid in floor etc complete.
S & F in repair bib tap with wall flange of 15mm dia, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule complete.
Dismantling of cast iron pipe 70mm/100 mm bore in any position and description complete.
S&F for 75mm bore cast iron soil, waste and vent pipe in any length with or without ears fixed to walls including suitable clamps after every one mtr of interval with cement joints complete all as specified and directed.
S & F in repair cast iron bends (any radius ), diminishing pieces or tapers of 75 mm bore fitted with oval access door.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified.
S&F in repair PVC(SWR) bend any radius for 110 mm bore pipe complete
S&F in repair 15mm dia angle valve ,chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all specified .
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm.
M&L for 20 mm dia stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both side for iron pipe oe for union and fixed .
S & F in repair CP towel rail with lower hanger Make-AHS-1581H of Jaquar or equivalent in kohler/Parco.
S & F in repair CP Soap dish of Make-AKP-35731P of Jaquar or equivalent in kohler/Parco.
S&F 15 mm dia bib tap, cast copper alloy with crutch or butterfly handle, CP, fancy type, long body screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F in repair pillar tap foam flow chromium plated, fancy type, 15 mm dia, capastan heads, screwed down high pressure all as specified and directed. Cat No 8304 Make Prayag or equivalent in Jaquar/Parko.
S&F in repair 500 ltr capacity rotational moulded polythlyene water storage tanks (cylindrical vertical with close top) three layers, hoisted and fixed in position all as secified
S&F for brass ball valve, high pressure with pollythene float and fly nut complete of 20mm dia
S&F in repair mild steel powder coated 20 mm dia curtain rod including brackets and end knobs / fineals complete all as spcified.
S&F in repair anodised aluminum door frame / chowkhats of any size and length including re-fixing shutters etc all as specified and directed by Engineer -in- Charge.
Taking down aluminium chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each.
Taking down aluminium chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Sqm but n. exc 4.0sqm each.
Taking down aluminium shutters of any description, area exc 1 sqm and not exc 2.00sqm each.
Taking down aluminium shutters of any description, area n. exc 1 sqm each.
Taking down aluminium partitions of any description complete all as specified.
S&F anodised aluminium powder coated frame for door, windows, ventilator, partition wall etc with one or more rebates including joining cleat for fixing complete all as specified and as directed
S&F anodised aluminium powder coated door shutter, aluminium section weight 0.55 Kg/m including neccesary joining cleats, glazing clips,rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screw etc complete all as specified.
S&F aluminum grill of design and parttern as approved by GE including aluminium beading complete.
S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples .
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
M&L for 12mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & fixed with screws to aluminium/timber frame work complete
S & F in repair door closurer hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width of aluminum body (die cast) weight between 61 to 80 kg.
S&F for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other party made of mild steel heavy duty complete.
S&F for purpose made aluminium handle 75 to 100mm dia all as per sample with display of pull /push fixed on existing door shutter with necessary screws complete all as specified.
S & F mild steel mortic lock vertical type size 100mm 4 levers
S&F in repairs mild steel mortice lock, vertical type, size 65mm 4 levers
S&F in repairs aluminium tower bolt of extruded section150mm length fixed with screws complete all as specified.
S&F in repairs 125mm aluminium (cast type) anodized handle and fixed with screws complete all as specified.
S&F in repairs 250mm long aluminium sliding door bolt not less than 12mm dia with and including bolts and nuts complete all as specified.
S&F in repairs aluminium door stopper double legged with rubber shoe 75mm long fixed to door shutters complete.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified.
S&F 3mm thick plain sheet glass ordinary quality and glazing with oil putty or with wooden beads in square n.exc 0.50 Sqm.
S&F 3mm thick figured glass, pin head type and glazing with oil putty in square not exceeding 0.50 Sqm each pane complete all as specified.
E/M PORTION Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling rose, lamp holder, sockets, wooden terminal boxes, plastic laminated sheet cover all as specified and as directed by Engr-in-Charge.
Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed by Engr-in-Charge.
M & L for point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLSH multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories including modular metal flush box with modullar plate for mounting switches, sockets, fan regulators, etc and earth wire singlle core PVC insulated but unsheathed multistrand copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLSH cable as continuous earth wire connecting to common earth dolly in concealed wiring system including making good the disturbed surface of wall for one light point controlled by one switch one way complete all as specified and directed by Engr- in- Charge.
All as per item No.72 above but for one fan/exhaust fan point controlled by one switch.
All as per item No.72 above but for one socket outlet 5 Amp controlled by one switch on independent board
All as per item No.72 above but for one 3 pin 5Amps socket out let point on the same board controlled by one switch complete
All as per item No.72 above but for one bell point controled by one bell push 5 Amp.
All as per item No 72 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sqmm copper conductor cable connected to earth dolly complete all as specified and directed by Engr-in-Charge.
All as per item No 72 here-in-before but for one power point 6 pin 15 Amps socket out let with 4.0 Sq mm stranded copper conductor cable PVC insulated including earth wire 4 Sq mm copper conductor cable connected to earth dolly complete, all as specified and directed by Engr-in-Charge.
Supply and fixing of modular switch 1 way 6 Amps one module .
Supply and fixing of modular socket 6 Amp 2/3 Pin combined 02 module complete.
Supply and fixing of modular switch one way 16 Amps, one module complete.
S & F of socket modular type 6 Amp/16 Amps, 2/3 pin combined 02 Module complete.
Supply and fixing of ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete.
Supply and fixing in repair electric bell, multi music type, 230 volt AC, single pole complete. Make : Anchor/Cona/Havells.
Supply and fixing of modular bell push 6 Amps one module complete .
Supply & fixing in replacement of Indoor decorative LED battens- integrated type 20 watt 4 feet white fixture with extruded aluminium body, suitable for LED tube 20 watt , bipin holder, connector block, LED rod 20 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed by Engr-in-Charge.
S&F in replacement of Indoor decorative LED battens- integrated type 10 watt 2 feet white fixture with extruded aluminium body, suitable for LED tube 10 watt , bipin holder, connector block, LED rod 10 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 12 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete.
Supply and fixing in replacement of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete.
Supply and fixing in replacement of sheet metal enclosure for distribution board VTPN (when MCBs to be used ) 4 ways double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete.
Supply and fixing in replacement of MCCB, 4 pole 100A, 16KA, 415Volts complete.
Supply and fixing in replacement of MCB, SPN, 40A ,10KA.
Supply and fixing in replacement of MCB, SP, 6-32A ,10KA.
Supply and fixing in replacement of MCB, SP 40 Amp ,10KA.
S & F in replacement of Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one MCB single pole 20 Amps complete.
M & L for sub main wiring with single core PVC insulated but unsheathed FRLS cable of 2 runs of 6 sqmm multistranded copper conductor 1100 Volt grade IS-694 drawing into and including rigid non metallic PVC conduit, medium grade ISI marked ( not less than 25 mm) with all conduit fittings & fixing accessories for concealed in wall/ ceiling or surface including one run of 6 sq mm earth wire for earth continuity conductor complete . ( Note- The 2 runs of 6.0 sqmm and 1 run of 6.0 sqmm of single core cable for earth continuity conductor and revelent conduit with fitting acessories will be measured as one run)
M & L for sub main wiring with single core PVC insulated but unsheathed FRLS cable of 2 runs of 4 sqmm multistranded copper conductor 1100 Volt grade IS-694 drawing into and including rigid non metallic PVC conduit, medium grade ISI marked ( not less than 25 mm) with all conduit fittings & fixing accessories for concealed in wall/ ceiling or surface including one run of 4 sqmm earth wire for earth continuity conductor complete . ( Note- The 2 runs of 4.0 sqmm and 1 run of 4.0 sqmm of single core cable for earth continuity conductor and revelent conduit with fitting acessories will be measured as one run)
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC concrete chamber of size 300 mm x 300 mm x 300 mm (inside dimension) in concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish, internal surface of concrete chamber in 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm in 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM JALLI and charcoal dust and common salt all as shown in Electrical plate No. 3 of MES SSR Part-I (2009) and including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe of 20mm bore medium grade etc complete including all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge.
S&F for Exhaust fan with louvers PVC body, complete 200mm sweep 230 volts, single phase , AC supply complete with nuts, bolts and washers size of the bolts 06 inch long 6mm dia embedded in the wall complete.
S & F for Exhaust fan metallic body, complete 300 mm sweep 230 volts, single phase , AC supply complete with nuts, bolts and washers size of the bolts 06 inch long 6mm dia embedded in the wall complete.
Supply and fixing ceiling fan with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor complete all as specified and directed by Engr-in-Charge .
Supply and fixing in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
Supply and fixing in replacement of LED post top 25 watt IP65 with internally prewired including electronic driver and connecting up with three core flexible copper conductor 1.5 sqmm cable complete.
Taking down exhaust fan/ceiling fans of any sweep and any size including cable connections and disconnecting of fan blades and removing the fan with blades and deposit in MES store yard.
Kunal Construction Co.
Mahesh Enterprises
JAIPAL AND BROTHERS
SHEELSONS ENTERPRISES
M/S Parshant Associates
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .