Construction of Student Activity (SAC) Building (Ground floor) with the design of foundation for Ground with 4 floors. Replacement of 4 nos. old installed Lifts by 4 nos. of new Lifts (having 10 passenger capacity) and installation of 02 nos. new additional Lifts (having 13 passenger capacity) in the back side open courtyard in the Swami Vivekanand Hostel. Renovation and refurbishment of Senate Hall and office of the Director in the Administrative Building at MNNIT Allahabad

BILL OF QUANTITY (BOQ)

NAME OF PROJECT :

(1) Construction of Student Activity (SAC) Building (Ground floor) with the design of

foundation for Ground +4 floors.

(2) Replacement of 4 nos. old installed Lifts by 4 nos. of new Lifts (having 10 passenger

capacity) and installation of 02 nos. new additional Lifts (having 13 passenger capacity) in the

back side open courtyard in the Swami Vivekanand Hostel.

(3) Renovation and refurbishment of Senate Hall and office of the Director in the

Administrative Building at MNNIT Allahabad.

SUMMARY OF COST (DSR 2023)

SL.NO. DESCRIPTION DSR AMOUNT NS AMOUNT

CONSTRUCTION OF SAC BUILDING

2 CONCRETE WORK 6,84,567.90 0.00

5 DOOR & WINDOW WOOD WORK 11,68,124.47 3,06,000.00

8 PAINTING AND FINISHING WORK 33,02,086.88 0.00

9 WATER PROOFING WORK 11,78,852.10 0.00

10 ROOFING WORK 9,89,011.00 0.00

11 FALSE CEILING WORK 2,38,157.90 0.00

13 MISCELLANEOUS WORK 0.00 4,25,000.00

14 TOTAL AMOUNT FOR CIVIL WORKS 3,98,35,459.14 8,11,806.85

14 TOTAL AMOUNT FOR CIVIL WORKS 3,98,35,459.14 8,11,806.85

Total after multiplying by 0.973 as per CPWD

circular no. 158/SE (TAS)/GST/2024/02-E dated 4,26,16,890.28

08.08.2024 on DSR items

Add Cost Index @3% as per CPWD circular dated

GRAND TOTAL OF SAC BUILDING - (A) 4,95,24,856.52

GRAND TOTAL OF SAC BUILDING - (A) 4,95,24,856.52

1 EARTH WORK 1,08,807.91 0

2 WATER PROOFING 3,08,024.00 0

3 CONCRETE WORK 1,12,260.53 0

5 MASONRY WORK 17,60,049.85 0

6 STEEL WORK 4,33,399.00 0

9 DISMANTLING/REPAIRING WORK -10P & 13P 37,12,544.20 4,90,000

10 RAINWATER 63,008.40 0

Digitally signed by GOUTAM

11 ELECTRICAL WORK 4,57,101.34 2,04,76,530

Total after multiplying by 0.973 as per CPWD

circular no. 158/SE (TAS)/GST/2024/02-E dated 2,23,86,347.66

08.08.2024 on DSR items

Add Cost Index @3% as per CPWD circular dated

GRAND TOTAL OF LIFT WORK - (B) 4,41,23,468.09

GRAND TOTAL OF LIFT WORK - (B) 4,41,23,468.09

RENOVATION OF DIRECTOR OFFICE

1 CONCRETE WORK AND ATT 2,57,597.50

2 MASONRY WORK 2,43,573.00

4 STEEL WORK 27,208.00

7 ROOFING & FALSE CEILING WORK 1,24,067.24 20,51,611.25

8 FURNITURE 18,47,466.00

9 TOTAL AMOUNT FOR CIVIL WORKS 47,25,128.57 50,91,481.20

9 TOTAL AMOUNT FOR CIVIL WORKS 47,25,128.57 50,91,481.20

10 INTERNAL ELECTRICAL WORK 4,65,749.00 25,661.00

11 DATA, TELEPHONE SYSTEM INCLUDING

LIGHT FIXTURE 10,378.22 3,35,929.00

12 ACTIVE COMPONENTS 0.00 6,22,602.00

TOTAL AMOUNT FOR ELECTRICAL AND LV

TOTAL AMOUNT FOR ELECTRICAL AND LV

TOTAL AMOUNT DIRECTOR OFFICE

TOTAL AMOUNT DIRECTOR OFFICE

RENOVATION OF SENATE HALL

1 CONCRETE WORK AND ATT 2,11,437.25

2 MASONRY WORK 1,62,382.00

4 STEEL WORK 1,86,616.00

7 ROOFING & FALSE CEILING WORK 79,774.57 13,19,175.00

8 FURNITURE WORK 58,13,000.00

9 TOTAL AMOUNT FOR CIVIL WORKS 39,30,127.60 1,00,85,219.85

9 TOTAL AMOUNT FOR CIVIL WORKS 39,30,127.60 1,00,85,219.85

10 INTERNAL ELECTRICAL WORK 5,00,952.00 25,661.00

11 LIGHT FIXTURE 37,368.00 98,070.00

12 DATA, TELEPHONE SYSTEM INCLUDING ACTIVE COMPONENTS

14 TOTAL AMOUNT FOR ELECTRICAL AND LV

14 TOTAL AMOUNT FOR ELECTRICAL AND LV

16 DISMANTLING WORK 83,601.53 0.00

TOTAL AMOUNT SENATE HALL RENOVATION 56,45,678.13 2,33,73,620.28

TOTAL AMOUNT SENATE HALL RENOVATION 56,45,678.13 2,33,73,620.28

SUB TOTAL OF DIRECTOR OFFICE AND

SENATE HALL RENOVATION

Digitally signed by GOUTAM

Total after multiplying by 0.973 as per CPWD

circular no. 158/SE (TAS)/GST/2024/02-E dated 1,13,32,144.64

08.08.2024 on DSR items

Add Cost Index @3% as per CPWD circular dated

GRAND TOTAL OF DIRECTOR OFFICE

GRAND TOTAL OF DIRECTOR OFFICE

AND SENATE HALL RENOVATION - (C) 4,50,09,812.46

GRAND TOTAL (A+B+C) 13,86,58,137.07

GRAND TOTAL (A+B+C) 13,86,58,137.07

Digitally signed by GOUTAM

Bill of Quantity (BOQ)

Sl. No. Description Unit Qty Rate DSR Amount NSR Amount

Replacement of 4 nos. old installed Lifts by 4 nos. of new Lifts (having 10 passenger capacity) and installation of 02 nos. new additional

Lifts (having 13 passenger capacity) in the back side open courtyard in the Swami Vivekanand Hostel.

1.0 SUB HEAD-I :- EARTH WORK

1.1 1.1 CARRIAGE OF MATERIALS

Carriage of good earth by mechanical transport including loading,

unloading and stacking

1.2 2.6 Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in depth,

1.5 m in width as well as 10 sqm on plan) including getting out

and disposal of excavated earth lead upto 50 m and lift upto 1.5

m, as directed by Engineer-incharge.

2.6.1 All kinds of soil cum 95.00 177.50 16,862.50

1.3 2.26 Extra for every additional lift of 1.5 m or part thereof in

excavation /banking excavated or stacked materials.

(a) 2.26.1 All kinds of soil (From 1.5 to 3 m depth) cum 95.00 126.80 12,046.00

1.4 2.25 Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding 20cm in

depth, consolidating each deposited layer by ramming and cum 38.00 196 7,448.00

watering, lead up to 50 m and lift upto 1.5 m.

1.5 2.27 Supplying and filling in plinth with sand under floors, including

watering, ramming, consolidating and dressing complete.

1.6 2.34 Supplying chemical emulsion in sealed containers including

delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Litre 15.00 234.75 3,521.25

1.7 2.35 Diluting and injecting chemical emulsion for pre-constructional

anti-termite treatment (excluding the cost of chemical emulsion)

2.35.3 Treatment of soil under existing floors using chemical emulsion @

one litre per hole, 300 mm apart including drilling 12 mm

diameter holes and plugging with cement mortar 1 :2 (1 cement :

2 Coarse sand) to match the existing floor :

1.8 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. sqm 20.00 310.05 6,201.00

EARTH WORK SUB HEAD TOTAL 108807.91 0.00

2 Water Proofing

Digitally signed by GOUTAM

2.1 22.1 Providing and laying integral cement based treatment for water

proofing horizomal Surface at all depth below ground level for.

Underground structures as directed by Engineer-in-Charge and

(I) 1st layer of 22 mm to 25 mm thick approved and specified

rough stone Slab over a 25 mm thick base of cement mortar 1:3

(1 cement : 3 coarse sand) including applying of twice ( at base

and top of mortar ) cement slutty @ 2.2kg/m2 (each time) mixed

with water proofing compound conforming to 15:2645 in the

recommended proportion over the leveling course (leveling

course to be paid separately). Joints sealed and grouted with

cement slurry mixed with walter proofing compound.

(li) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3

coarse sand) mixed with water proofing compound in

recommended proportions.

(lii) Finishing top with stone aggregate of 10 mm to 12 mm

nominal size spreading @ B cudm/sqm thoroughly embedded in Sqm 60 1515.6 90,936.00

Providing and laying integral cement based treatment for water

proofing on the vertical surface by fixing specified stone slab 22

to 25 mm thick with cement slurry mixed with water proofing

compound conforming to IS:2645 in recommended proportions

a gap of 20 mm (minimum) between stone slabs and the

surfaces and filling the gaps with neat cement slurry mixed with

water proofing compound and finishing the exterior of stone slab

cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with

neat cement punning mixed with water proofing compound in

recommended proportion complete at all levels and as directed

Engineer-in-charge :

2.3 22.6 Providing and laying water proofing treatment on roofs of slabs by

applying cement slurry mixed with water proofing cement

compound consisting of applying-

(a) After surface preparation, first layer of slurry of cement @

0.488 kg/ Sqm mixed with water proofing cement compound @

(b) Laying second layer of Fiber glass cloth when the first layer is

still green. Overlaps of joints of Fiber cloth should not be less

Digitally signed by GOUTAM

(c) Third layer of 1.5 mm thickness consisting of slurry of cement

@ 1.289 kg/sqm mixed with water proofing cement compound @

0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be

allowed to air cure for 4 hours followed by water curing for 48

hours. The entire treatment will be taken upto 30 cm on parapet

wall and tucked into groove in parapet all around.

(d) Fourth and final layer of brick tiling with cement mortar

(which will be paid for separately. For the purpose of Sqm 80.00 688.90 55,112.00

measurement the entire treated surface will be measured.

SUB HEAD-Water Proofing WORKS 308024.00 0.00

3 SUB HEAD-II :- CONCRETE WORKS

3.1 4.1 Providing and laying in position cement concrete of specified

grade excluding the cost of centering and shuttering - All work up

to plinth level :

a) 4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural

sources : 4 graded stone aggregate 20 mm nominal size derived cum 6.00 7878.50 47,271.00

from natural sources)

b) 4.1.6 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural

sources : 6 graded stone aggregate 40 mm nominal size derived cum 6.00 7178.75 43,072.50

from natural sources)

3.2 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1

cement : 3 coarse sand (zone-III) derived from natural sources :

6 graded stone aggregate 20 mm nominal size derived from

natural sources) over 75mm thick bed of dry brick ballast 40 mm sqm 29.25 749.30 21,917.03

nominal size, well rammed and consolidated and grouted with fine

sand, including necessary excavation, levelling & dressing &

finishing the top smooth.

CONCRETE WORK SUB HEAD TOTAL 112260.53 0.00

4.0 SUB HEAD-III :- REINFORCED CEMENT CONCRETE WORK

4.1 5.9 Centring and shuttering including strutting,propping etc. and

removal of form for

a) 5.9.1 Foundations, footings, bases of columns etc. for mass concrete.

b) 5.9.2 Walls (any thickness) including attached pilasters. Butteresses,

plinth and string courses etc.

c) 5.9.3 Suspended floors, roots, landings, balcnies and access platform.

Digitally signed by GOUTAM

d) 5.9.4 Shelves (Cost in situ)

e) 5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers.

f) 5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts

g) 5.9.7 Stairs, (excluding landings) except spiral-staircases sqm 0.00 764.95 0.00

h) 5.11.1 Extra for additional height in centering, shuttering where ever

required with adequate bracing, propping etc., including cost of

de-shuttering and decentering at all levels, over a height of 3.5

m, for every additional height of 1 metre or part thereof (Plan

area to be measured).

i) Suspended floors, roofs, landings, beams and balconies {Plan

area to be measured)

STEEL REINFORCEMENT

4.2 5.22 Steel reinforcement for R.C.C. work including straightening,

cutting,bending, placing in position and binding all complete upto 0.00

plinth & above plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kilogra

4.3 5.22A Steel reinforcement for R.C.C. work including straightening,

cutting, bending,placing in position and binding all complete 0.00

above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kilogra

Digitally signed by GOUTAM

4.4 5.33 Providing and laying in position ready mixed or site batched

design mix cement concrete for reinforced cement concrete work;

using coarse aggregate and fine aggregate derived from natural

sources, Portland Pozzolana / Ordinary Portland /Portland Slag

cement, admixtures in recommended proportions as per IS: 9103

to accelerate / retard setting of concrete, to improve durability

and workability without impairing strength; including pumping of

concrete to site of laying, curing, carriage for all leads; but

excluding the cost of centering, shuttering, finishing and 0.00

reinforcement as per direction of the engineer-in-charge; for the

following grades of concrete. Note: Extra cement up to 10% of

the minimum specified cement content in design mix shall be

payable separately. In case the cement content in design mix is

more than 110% of the specified minimum cement content, the

contractor shall have discretion to either re-design the mix or

bear the cost of extra cement.

a All works upto plinth level 0.00

5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg

b All works above plinth level upto floor V level 0.00

5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg

R.C.C. WORK SUB HEAD TOTAL 11640772.77 0.00

5.0 SUB HEAD-IV :- MASONRY WORK

5.1 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in foundation and plinth in:

a) 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 25.00 7132.25 1,78,306.25

5.2 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in superstructure above plinth level up to

floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 0.00 9105.95 0.00

5.3 6.13 Half brick masonry with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in superstructure above plinth level

up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm 45.00 1123.80 50571.00

Digitally signed by GOUTAM

5.4 Brick work with common burnt clay modular bricks of class

designation 7.5 in exposed brick work including making horizontal

6.27.2 and vertical grooves 10 mm wide 12 mm deep complete in Cum 110.00 8312.9 9,14,419.00

cement mortar 1:6 (1cement: 6 coarse sand). Above plinth level

5.5 Extra for additional height Extra for brick work / AAC block

6.5 masonry / Tile brick masonry insuperstructure above floor V level, Cum 150.00 169.45 25,417.50

for each four floors or part thereof by mechanical means

5.6 Derived Providing and laying autoclaved aerated cement blocks masonry

from with 150mm/230mm/200mm/300 mm thick AAC blocks in super

DAR structure above plinth level up to floor V level with RCC band at

6.47 sill level and lintel level with approved block laying polymer cum 38.00 10195.45 3,87,427.10

modified adhesive mortar all complete as per direction of

Engineer-in-Charge. (The payment of RCC band and

reinforcement shall be made for seperately).

5.7 6.38 Providing and laying Autoclaved Aerated concrete (AAC) blocks

masonry 100 mm/ 125 mm thick with Grade-I AAC blocks of

density 551 to 650kg/ cum conforming to IS: 2185 (Part 3) in

super structure above plinth level up to floor V level in cement cum 20.00 10195.45 2,03,909.00

mortar 1:4 (1 cement : 4 coarse sand). The rate includes

providing and placing in position 2 Nos 6 mm dia M.S. bars at

every third course of masonry work.

MASONRY WORK SUB HEAD TOTAL 1760049.85 0.00

6.0 SUB HEAD-VI :- STEEL WORK

6.1 10.13.1 Providing and fixing T-iron frames for doors, windows and

ventilators of mild steel Tee-sections, joints mitred and welded,

including fixing of necessary butt hinges and screws and applying

a priming coat of approved steel primer. kg 375.00 136.00 51,000.00

Fixing with 15x3 mm lugs 10 cm long embedded in cement

concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse

sand : 6 graded stone aggregate 20 mm nominal size).

6.2 10.16 Steel work in built up tubular (round, square or rectangular

hollow tubes etc.) trusses etc., including cutting, hoisting, fixing

in position and applying a priming coat of approved steel primer,

including welding and bolted with special shaped washers etc.

10.16.1 Hot finished welded type tubes kg 375.00 194.40 72,900.00

Digitally signed by GOUTAM

6.3 10.25 Steel work welded in built up sections/ framed work, including

hoisting, fixing in position and applying a priming coat of

primer using structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates

and similar works

6.4 10.28 Providing and fixing stainless steel (Grade 316) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab with

suitable arrangement as per approval of Engineer-incharge, (for

payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts,

fasteners etc.).

STEEL WORK TOTAL 433399.00 0.00

7.0 SUB HEAD- VII :- FLOORING

7.1 11.26 Kota stone slab flooring over 20 mm (average) thick base laid

over and jointed with grey cement slurry mixed with pigment to

match the shade of the slab, including rubbing and polishing

complete with base of cement mortar 1 : 4 (1 cement : 4 coarse

7.2 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado

laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3

sand) and jointed with grey cement slurry mixed with pigment to

the shade of the slabs, including rubbing and polishing complete.

Digitally signed by GOUTAM

7.3 11.55 Providing and laying flamed finish Granite stone flooring in

required design and patterns, in linear as well as curvilinear

portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average)

thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid

and jointed with cement slurry and pointing with white cement

slurry admixed with pigment of matching shade including rubbing,

curing and polishing etc. all complete as specified and as directed

by the Engineer-in-Charge :

11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite

Brown, Cat Eye or equivalent.

7.4 11.56 Providing and laying Polished Granite stone flooring in

required design and patterns, in linear as well as curvilinear

portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average)

thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid

and jointed with cement slurry and pointing with white cement

slurry admixed with pigment of matching shade including rubbing,

curing and polishing etc. all complete as specified and as directed

by the Engineer-in-Charge.

11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or

FLOORING WORK TOTAL 2885241.40 0.00

8.0 SUB HEAD-VIII :- PAINTING AND FINISHING WORK

8.1 13.4 12mm cement plaster of mix :

8.2 13.5 15 mm cement plaster on the rough side of single or half brick

8.3 13.11 18 mm cement plaster in two coats under layer 12 mm thick

cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top sqm 868.00 518.55 4,50,101.40

layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

13.19 Extra -Rough cast plaster upto 10 m height above ground level

with a mixture of sand and gravel or crushed stone from 6 mm to

10 mm nominal size, dashed over and including the fresh plaster

in two layers, under layer 12 mm cement plaster 1:4 (1 cement :

4 coarse sand) and top layer 10 mm cement plaster 1:3 (1

cement : 3 fine sand) mixed with 10% finely grounded hydrated

lime by volume of cement.

12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)

Digitally signed by GOUTAM

13.22 Extra for plastering exterior walls of height more than 10 m

from ground level for every additional height of 3 m or part there

8.4 13.50 Applying priming coat:

13.50.3 With ready mixed red oxide zinc chromate primer of approved

brand and manufacture on steel galvanised iron/ steel works

8.5 13.80 Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over the

plastered wall surface to prepare the surface even and smooth sqm 1817.00 156.05 2,83,542.85

8.6 13.41 Distempering with oil bound washable distemper of pproved

brand and manufacture to give an even shade :

13.41.1 New work (two or more coats) over and including water thinnable

priming coat with cement primer

8.7 13.62 Painting with synthetic enamel paint of approved brand and

manufacture of required color to give an shade.

13.62.1 Two or more coats on new work including priming coat of ordinary

paint approved brand.

8.8 13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with

Silicone additives of required shade:

New work (Two or more coats applied @ 1.43 ltr/10 sqm over sqm 893.24 171.10 1,52,833.36

and including priming coat of exterior primer applied @ 2.20

8.9 NSR Providing & fixing galvanized low carbon wire, anealed wire

Chicken mesh formed by twisting two adjacent wires at least four

times, forming a hexagonal shaped strong honeycomb mesh

structure on joints of RCC & Brick work before plastering, of sqm 660.00 150.00 99,000.00

required gauge (not less than 21 gauge)and size with nails etc.

complete as specified in drawing and as per the Direction of

Engineer-in-charge.

PAINTING AND FINISHING WORK TOTAL 1526342.15 99000.00

9.0 SUB HEAD-XI :- DISMANTELLING WORK

9.1 NSR Dismantelling of front wall, granite and existing Lift. each 4 100000 4,00,000.00

Repairing/Alteration and Modification work of 10Passanger -old

Digitally signed by GOUTAM

14.75 Repair to plaster of thickness 12 mm to 20 mm in patches of area

2.5 sqm and under, including cutting the patch in proper shape,

raking out joints and preparing plastering the wall surface with

9.3 white cement based polymer modified self curing mortar, Sqm 536 670.95 3,59,629.20

including disposal of rubbish, all complete as per the direction of

Engineer-In-Charge.

14.17 Raking out joints in lime or cement mortar and preparing the

surface for re-pointing or replastering, including disposal of

9.4 rubbish to the dumping ground, all complete as per direction of sqm 460 72.45 33,327.00

Engineer-in-Charge.

14.72 Providing and fixing double scaffolding system (cup lock type) on

the exterior side, up to seven story height made with 40 mm dia

M.S. tube 1.5 m centre to centre, horizontal & vertical tubes

joining with cup & lock system with M.S. tubes, M.S. tube challies,

M.S. clamps and M.S. staircase system in the scaffolding for

working platform etc. and maintaining it in a serviceable condition

for the required duration as approved and removing it there after.

The scaffolding system shall be stiffened with bracings, runners,

9.5 connection with the building etc wherever required for inspection Sqm 1744 338.35 590082.4

of work at required locations with essential safety features for the

workmen etc. complete as per directions and approval of

Engineer-in-charge. The elevational area of the scaffolding shall

be measured for payment purpose. The payment will be made

once irrespective of duration of scaffolding.

15.1 Dismantling dressed stone work ashlar face stone work, marble

work or precast concrete work manually/ by mechanical means

9.6 including stacking of serviceable and disposal of unserviceable

material within 50 metres lead as per direction of Engineer-in-

Dismantelling Work For 13P -2no lift

16.83 Taking out existing CC interlocking paver blocks from footpath/

central verge, including removal of rubbish etc., disposal of

unserviceable material to the dumping ground, for which payment

9.8 shall be made separately and stacking of serviceable material Sqm 100 131.75 13,175.00

within 50 metre lead as per direction of Engineer-in-Charge.

16.84 Laying old cement cocrete interlocking paver blocks of any

design/ shape laid in required line, level, curvature, colour and

pattern over and including 50 mm thick compacted bed of coarse

9.9 sand, filling the joints with fine sand etc. all complete as per the Sqm 100 402.95 40,295.00

direction of Engineer- in-charge. (Old CC paver blocks shall be

supplied by the department free of cost).

Digitally signed by GOUTAM

15.3 Demolishing R.C.C. work manually/ by mechanical means

including stacking of steel bars and disposal of unserviceable

9.10 material within 50 metres lead as per direction of Engineer - in- Cum 50 3551.25 1,77,562.50

15.5 Extra for cutting reinforcement bars manually/ by mechanical

means in R.C.C. or R.B. work (Payment shall be made on the

9.11 cross sectional area of R.C.C. or R.B. work) as per direction of Sqm 96 1147.2 1,10,131.20

Engineer-in-charge

15.12 Dismantling doors, windows and clerestory windows (steel or

9.12 wood) shutter including chowkhats, architrave, holdfasts etc.

complete and stacking within 50 metres lead:

9.13 15.12.1 Of area 3 sq. metres and below Each 4 367.2 1,468.80

9.14 15.12.2 Of area beyond 3 sq. metres Each 14 502.75 7,038.50

15.25 Dismantling stone slab flooring laid in cement mortar including

9.15 stacking of serviceable material and disposal of unserviceable Sqm 84 266.45 22,381.80

material within 50 metres lead.

9.16 NS Shifting of underground utility services for 13P lift (2nos) LS 1 90000 90,000.00

DISMANTLING WORK TOTAL 3712544.20 490000.00

10.0 Rain Water Pipe

10.1 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain

water pipes conforming to IS : 13592 Type A, including jointing

with seal ring conforming to IS : 5382, leaving 10 mm gap for metre 66 377.4 24,908.40

thermal expansion, (i) Single socketed pipes - 110 mm diameter

10.2 12.42. Providing and fixing on wall face unplasticised - PVC moulded

fittings/ accessories for unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal

12.42.1. Coupler- 110 mm ,

12.42.2. Single pushfit Coupler-110 mm

12.42.3. Single tee with door-110x110x110 mm

12.42.4. Single tee without door-110x110x110 mm

10.3 12.21.1 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 stone aggregate 10 mm and down gauge),

including finishing with cement mortar 1:3 (1 cement : 3 fine meter 50 305.15 15,257.50

sand) as per standard design -In 75x75 mm deep chase metre

Digitally signed by GOUTAM

10.4 12.22 Making khurras 45x45 cm with average minimum thickness of 5

cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1

m x 400 micron, finished with 12 mm cement plaster 1:3 (1 Each 50 298.25 14,912.50

cement : 3 coarse sand) and a coat of neat cement, rounding the

edges and making and finishing the outlet complete.

SUB HEAD TOTAL RAINWATER 63008 0

11.0 ELECTRICAL WORK

S.H.-I LIFT SYSTEM

11.1 MR 10 PASSENGER LIFT

LIFT PIT SIZE : 1754 (W) X 2000 (D) X 800 DOOR

OPENING ( EXISTING WELL )

Supplying, Installation, Testing & Commissioning of 10 Passenger

(680 Kg) Lifts (Gearless), with Machin Room having contract

speed of 1.5 MPS serving different floors in the lift shaft as per

detailed specifications enclosed and as under:-

a) Speed --> 1.5 / 1.6 MPS

b) Floors --> G+7

c) Travel --> 26.0 Mtrs Approx.

d) Stops & door opening - --> 8/800 mm WideX

e) Controller: A.C. variable voltage & variable frequency drive.

f) Automatic rescue device complete with dry maintenance free

batteries as required.

g) Operation: Microprocessor based single automatic push button /

Simplex / Duplex selective collective with / without attendant.

h) Power-415 V, 3 phase, 50 Hz, 4 wires system

i) Type of doors

(i) Car Power operated, Two Speed Stainless Steel hail line finish.

(SS 304 /441 Grade)

(ii) Landing doors : Stainless Steel hail line finish. (SS 304 /441

j) Hand rail not less than 600mm long at 900mm above floor level

to be fixed on all the three sides adjacent to control panel in the

k) The Lift shall be provided with Brail System.

l) Ceiling as per manufacturer's standards with Fan & LED Lights.

m) On each Landing outside the lift, a steel plate with illumination

sign shall be provided with written on it:- DO NOT USE LIFT IN

CASE OF FIRE. Fire man switch at ground floor to be provided.

Interlocking provision with Fire detection system shall be

Digitally signed by GOUTAM

n) Voice announcement system in the car to announce the position

of the elevator in the hoistway as the car passes or stops at a

floor served by the elevator.

o) IP based CCTV interfaced to be provided.

p) BMS interface for lift position & 3 way Intercom system.

q) 2 Hour Fire rated door. Manufacturer shall be submit the

certificate alongwith supply of material from NABL approved Lab.

The counterweights for balancing should be made of Cast Iron

Provision for purely Mechnical rescue arrangment in lift.

Lift described as above Set 4 31 37 861 125 51 444

11.2 MR 13 PASSENGER LIFT

LIFT PIT SIZE : 2000(W) X 2500 (D) X 1000 DOOR

Supplying, Installation, Testing & Commissioning of 13 Passenger

(884 Kg) Lifts (Gearless), with Machin Room Less ( MRL) having

contract speed of 1.5 MPS serving different floors in the lift shaft

as per detailed specifications enclosed and as under:-

a) Speed --> 1.5 /1.6 MPS

b) Floors --> G+7

c) Travel --> 26.0 Mtrs Approx.

d) Stops & door opening - --> 8/1000 mm WideX

e) Controller: A.C. variable voltage & variable frequency drive.

f) Automatic rescue device complete with dry maintenance free

batteries as required.

g) Operation: Microprocessor based single automatic push button /

Simplex / Duplex selective collective with / without attendant.

h) Power-415 V, 3 phase, 50 Hz, 4 wires system

i) Type of doors

(i) Car Power operated, Two Speed Stainless Steel hail line finish.

(SS 304/441 Grade)

(ii) Landing doors : Stainless Steel hail line finish. (SS 304/441

j) Hand rail not less than 600mm long at 900mm above floor level

to be fixed on all the three sides adjacent to control panel in the

k) The Lift shall be provided with Brail System.

l) Ceiling as per manufacturer's standards with Fan & LED Lights.

Digitally signed by GOUTAM

m) On each Landing outside the lift, a steel plate with illumination

sign shall be provided with written on it:- DO NOT USE LIFT IN

CASE OF FIRE. Fire man switch at ground floor to be provided.

Interlocking provision with Fire detection system shall be

n) Voice announcement system in the car to announce the position

of the elevator in the hoistway as the car passes or stops at a

floor served by the elevator.

o) IP based CCTV interfaced to be provided.

p) BMS interface for lift position & 3 way Intercom system.

q) 2 Hour Fire rated door. Manufacturer shall be submit the

certificate alongwith supply of material from NABL approved

The counterweights for balancing should be made of Cast Iron

Provision for purely Mechnical rescue arrangment in lift.

Lift described as above Set 2 34 86 513 69 73 026

11.3 MR Supply of following sizes of ISI marked Aluminium conductor

XLPE insulated cable as per IS 7098, armoured, served, sheathed

1100 volts grade. (Cable shall be purchased only after approval of

cable schedule by architect / consultant).

MR 4 core, 16 sq.mm Meter 250 1 750 4 37 500

11.4 7.50 Laying of one number PVC insulated and PVC sheathed / XLPE

power cable of 1.1 KV grade of following size in the existing RCC/

HUME/ METAL pipe as required.

11.5 9.1 Supplying and making end termination with brass compression

gland and aluminium lugs for following size of PVC insulated and

PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade

11.6 4.6 Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray (Galvanisation thickness not less than

50 microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.I. suspenders including G.I. bolts & nuts, etc. as required.

4.6.1 100 mm wide x 50 mm depth x 1.6 mm thickness. Meter 160 509 81 383

11.7 4.7 Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray "bends" (galvanisation not less than 50

microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.I. suspenders including G.I. bolts & nuts, etc. as required.

4.7.1 100 mm wide x 50 mm depth x 1.6 mm thickness. Each 6 881 5 287

Digitally signed by GOUTAM

11.8 4.8 Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray "Tee" (galvanisation not less than 50

microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.I. suspenders including G.I. bolts & nuts, etc. as required.

4.8.1 100 mm wide x 50 mm depth x 1.6 mm thickness. Each 6 1 009 6 054

11.9 4.9 Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray "Cross member"(galvanisation not less

than 50 microns) with perforation not more than 17.5%, in

convenient sections, joined with connectors, suspended from the

ceiling with G.I. suspenders including G.I. bolts & nuts, etc as

4.9.1 100 mm wide x 50 mm depth x 1.6 mm thickness. Each 6 1 009 6 054

11.10 4.10 Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray “Reducer” (galvanisation not less than

50 microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.I. suspenders including G.I. bolts & nuts, etc. as required.

4.10.1 100 mm wide x 50 mm depth x 1.6 mm thickness. Each 5 1 258 6 292

11.11 Supplying and laying of following size DWC HDPE pipe ISI marked

along with all accessories like socket, bend, couplers etc.

conforming to IS 14930, Part II complete with fitting and cutting,

jointing etc..direct in ground (75 cm below ground level) including

excavation and refilling the trench but excluding sand cushioning

and protective covering etc., complete as required.

14.16.3 120 mm dia (OD-120 mm & ID-103 mm nominal) Meter 250 280 69 948

11.12 Supply, Installation, Testing & Commissioning of Earthing

with copper earth plate 600 mm X 600mm X 3 mm thick

including accessories, and providing masonry enclosure with Nos. 6 13838 83 028

cover plate having locking arrangement and watering pipe of

5.6 2.7 metre long etc. with charcoal/ coke and salt as required.

11.13 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre

below ground as strip earth electrode, including

connection/terminating with nut, bolt, spring, washer etc. as Metre 170 972 1 65 240

required. (Jointing shall be done by overlapping and with 2 sets of

5.8 brass nut bolt & spring washer spaced at 50mm)

INCOMING / OUTGOING MCCB BOX

11.14 MR 63 Amp FP Moulded Case Circuit Breaker (25 KA) with Enclosure. Nos 2 16 480 32 960

11.15 MR Feeder Panel box IP65 Nos 4 70 000 2 80 000

11.16 MR Bucklet light / LED lights in the lift shaft & Connection passage. Nos 112 1 800 2 01 600

TOTAL FOR ELECTRICAL S.H. 4 57 101 204 76 530

GRAND TOTAL OF LIFT WORK IN SWAMI VIVEKANAND

GRAND TOTAL OF LIFT WORK IN SWAMI VIVEKANAND

Digitally signed by GOUTAM

Renovation and refurbishment of Senate Hall and office of the Director in the Administrative Building at MNNIT Allahabad

DIRECTOR OFFICE

1 SUB HEAD-II :- CONCRETE AND ATT WORKS

2.34 Supplying chemical emulsion in sealed containers including

delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Litre 20 234.75 4695.00

1.2 Diluting and injecting chemical emulsion for POST-

anti-termite treatment (excluding the cost of chemical emulsion)

:-Treatment at points of contact of wood work by chemical

2.35.5 emulsion Chlorpyriphos/ Lindane (in oil or kerosene based metre 200 279.7 55940.00

solution) @ 0.5 litres per hole by drilling 6 mm dia holes at

downward angle of 45 degree at 150 mm centre to centre and

sealing the same.

1.3 4.1 Providing and laying in position cement concrete of specified

grade excluding the cost of centering and shuttering - All work up

to plinth level :

a) 4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural

sources : 4 graded stone aggregate 20 mm nominal size derived cum 25 7878.5 196962.50

from natural sources)

CONCRETE AND ATT WORK SUB HEAD TOTAL 257597.50 0.00

2.0 SUB HEAD-IV :- MASONRY WORK

2.1 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in foundation and plinth in:

a) 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 15 7132.25 106983.75

2.2 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in superstructure bove plinth level up to

floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 15 9105.95 136589.25

MASONRY WORK SUB HEAD TOTAL 243573.00 0.00

3.0 SUB HEAD-V:- WOOD WORK

3.1 9.1 Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of required dia & length

( hold fast lugs or dash fastener shall be paid for separately).

Digitally signed by GOUTAM

9.1.1 Second class teak wood cum 0.73805 142949.7 105504.03

3.2 9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing

to frame with 10 mm diameter bolts, nuts and wooden plugs and

embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 each 36 228.85 8238.60

cement : 3 coarse sand : 6 graded stone aggregate 20mm

3.3 9.40 Providing and fixing wooden moulded beading to door and

window frames with iron screws, plugs and priming coat on

unexposed surface etc. complete :

9.40.1 2nd class teak wood

3.4 13.116 Polishing in high gloss/matt finish melamine clear polish on wood

work in required olor/wooden shade texture with following sqm 61.16 3049.85 186528.83

process in the sequence as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120

no. and then with sand paper of 160/180 nos.

2. Applying two coats of sealer with spray gun and allowing

sufficient drying time for 1st coat and 2nd coat is allowed to dry

for 8 to 12hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer

grading with ample water to remove excess sealer layer and

make the surface further smooth after this wet rubbing, then

surface is applied with special grade melamine fillers to fill all the

small and big holes/grooves etc. Filler coat to be allowed to dry

for 4 to 6 hrs on which again a light wet rubbing is done this

surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun

using melamine clear polish and melamine thinner in required

proportion. This 1st coat is allowed to dry for 24 hrs then this dry

surface is again fine wet rubbed smooth, which is further allowed

to dry for 12 hrs. The final melamine polish is applied with

compressor pressure spray gun using melamine clear polish and

melamine thinner mixed in required proportion complete as per

direction of Engineer-in-Charge. (Final coat to be done in 1 or 2

layers without gap of time.)

3.5 9.21 Providing and fixing ISI marked flush door shutters conforming to

IS : 2202 (Part I) non-decorative type, core of block board

construction with frame of 1st class hard wood and well matched

commercial 3 ply veneering with vertical grains or cross bands

and face veneers on both faces of shutters:

Digitally signed by GOUTAM

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

3.6 9.23 Extra for providing lipping with 2nd class teak wood battens 25

mm minimum depth on all edges of flush door shutters (over all sqm 20.16 462.35 9320.98

area of door shutter to be measured).

3.7 9.127 Providing & Fixing decorative high pressure laminated sheet of

plain / wood grain in gloss / matt/ suede finish with high density

protective surface layer and reverse side of adhesive bonding

quality conforming to IS : 2046 Type S, including cost of adhesive

of approved quality.

3.8 21.18 Providing and fixing 12 mm thick frameless toughened glass door

shutter of approved brand and manufacture, including providing

and fixing top & bottom pivot & double acting hydraulic floor

spring type fixing arrangement and making necessary holes etc. sqm 9.6 5325.9 51128.64

for fixing required door fittings, all complete as per direction of

Engineer-in-charge (Door handle, lock and stopper etc.to be paid

3.9 21.4 Providing and fixing double action hydraulic floor spring of

approved brand and manufacture conforming to IS : 6315, having

brand logo embossed on the body / plate with double spring

mechanism and door weight upto 125 kg, for doors, including

cost of cutting floors, embedding in floors as required and making

good the same matching to the existing floor finishing and cover

plates with brass pivot and single piece M.S. sheet outer box with

slide plate etc. complete as per the direction of Engineer-in-

21.4.1 With stainless steel cover plate minimum 1.25 mm thickness each 4 2823.85 11295.40

HARDWARES FITTINGS FOR DOOR

Providing and fixing approved brand and manufacturer SS 304

grade hardware's for Doors etc.

3.10 NSR Providing and fixing approved brand and manufacture SS 304

grade D type 1200mm Pull Handle with 32mm dia fixed with SS

screws etc. complete in all respects as per manufacturers'

specifications & as directed by Engineer-in-charge.

Digitally signed by GOUTAM

3.11 NSR Providing and fixing approved brand and manufacture SS 304

grade Glass door Lock, top and bottom patch fitting with SS

screws etc. complete in all respects as per manufacturers'

specifications & as directed by Engineer-in-charge.

3.12 NSR Providing and fixing approved brand and manufacture SS 304

Lever Handle D-type fixed with SS screws etc. complete in all

respects as per manufacturers' specifications & as directed by

Engineer-in-charge.

3.13 NSR Providing and fixing approved brand and manufacture SS 304

grade SS 304 grade Mortice lock with key cylinder fixed fixed with

SS screws etc. complete in all respects as per manufacturers'

specifications & as directed by Engineer-in-charge.

3.14 NSR Providing and fixing approved brand and manufacture SS 304

grade Tower bolt 250mm long with 10mm dia fixed with SS

screws etc. complete in all respects as per manufacturers'

specifications & as directed by Engineer-in-charge.

3.15 NSR Providing and fixing approved brand and manufacture SS 304

grade Tower bolt 150mm long with 10mm dia fixed with SS

screws etc. complete in all respects as per manufacturers'

specifications & as directed by Engineer-in-charge.

3.16 NSR Providing and fixing approved brand and manufacture SS 304

grade wall mounted door buffer fixed with SS screws etc.

complete in all respects as per manufacturers' specifications & as

directed by Engineer-in-charge.

3.17 NSR Providing and fixing approved brand and manufacture SS 304

grade Door Stopper - door mounted hanging type fixed with SS

screws etc. complete in all respects as per manufacturers'

specifications & as directed by Engineer-in-charge.

3.18 9.83 Providing and fixing aluminium die cast body tubular type

universal hydraulic door closer (having brand logo with ISI, IS :

3564, embossed on the body, door weight upto 35 kg and door each 7 1124.85 7873.95

width upto 700 mm), with necessary accessories and screws etc.

Digitally signed by GOUTAM

3.19 NSR Providing and fixing 12 mm thick frameless toughened glass

partitions of approved brand and manufacturer, including

providing and fixing partitions at top & bottom with aluminum Sqm 26.055 6000 156330.00

channel etc. all complete as per direction of Engineer-in-charge

WOOD WORK TOTAL 473051.67 340403.95

4.0 SUB HEAD-VI :- STEEL WORK

4.1 10.13.1 Providing and fixing T-iron frames for doors, windows and

ventilators of mild steel Tee-sections, joints mitred and welded,

including fixing of necessary butt hinges and screws and applying

a priming coat of approved steel primer. kg 100 136 13600.00

Fixing with 15x3 mm lugs 10 cm long embedded in cement

concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse

sand : 6 graded stone aggregate 20 mm nominal size).

4.2 10.16 Steel work in built up tubular (round, square or rectangular

hollow tubes etc.) trusses etc., including cutting, hoisting, fixing

in position and applying a priming coat of approved steel primer,

including welding and bolted with special shaped washers etc.

10.16.1 Hot finished welded type tubes kg 70 194.4 13608.00

STEEL WORK TOTAL 27208.00 0.00

5.0 SUB HEAD- VII :- FLOORING AND PANELLING

5.1 26.1 Providing and fixing in position Phenol bonded Bamboo wood

flooring with Plank of sizes 14mm thick, minimum 1800mm

length and minimum 100mm wide, in approved colour, texture

and finish having peroforance Appraisal certificate (PAC) issued

by building materials and technology promotion council (B<TPC).

The flooring Shall be fixed with tounge and groove interlocking

system, with underlayment of 4mm thick expandedpolyethylene

foam sheet having density 40kg/cim, over prepared surface with

necesary quarter round planks of suze 1900mm x 18mm and door

reducer of size 1900mm x 44mm, where ever required. The

Banmoo planks shall have density of 1000Kg/cim and minimum

hardness of 1000 Kgf. with eco freindly UV coating, all complete

as per direction of the Engineer-in-charge.

Digitally signed by GOUTAM

5.2 26.2 Providing and fixing in position Phenol bonded Bamboo wood in

wall skirting with Plank of sizes 14mm thick, minimum 1900mm

length and minimum 85mm wide, in approved colour, texture

and finish having peroforance Appraisal certificate (PAC) issued

by building materials and technology promotion council (B<TPC).

The Skirting shall be fixed with SS screwa and rawl plugs with

underlayment of 4mm thick expandedpolyethylene foam sheet

having density 40kg/cim, over prepared surface. The Banmoo

planks shall have density of 1000Kg/cim and minimum hardness

of 1000 Kgf. with eco freindly UV coating, all complete as per

direction of the Engineer-in-charge.

5.3 26.3 Providing and fixing in position Phenol bonded Bamboo wood wall

cladding at all height with Plank of sizes 10mm thick, minimum

1800mm length and minimum 100mm wide, in approved colour,

texture and finish having peroforance Appraisal certificate (PAC)

issued by building materials and technology promotion council

(BMTPC). with necessary profiles edges fixed with 40mm SS

screws 5 nos in each tile to framework made of seconf class teak

wood of size 20x15mm in center of each tile. The Cladding shall

be layed with backlayment of 4mm thick expandedpolyethylene sqm 205.8 6283.85 1293216.33

foam sheet having density 40kg/cim in two layers, first layer on

wall surface before fixing wooden frame and second layer on

frame under cladding. The Banmoo planks shall have density of

1000Kg/cim and minimum hardness of 1000 Kgf. with eco

freindly UV coating, all complete as per direction of the Engineer-

5.4 NSR Providing and Fixing of Akous wood grooved panel having system

NRC up to 0.88 with lineal perforation. The high grade

MDF/HDDMR panels shall be melamine laminate of size 2440mm

x128mm x 18mm with 2mm groove at 14mm pitch, Tongue and

Groove edges for seamless mounting having density of

800kg/m3(base panel confirming to IS 12406 and laminated

panel confirming to IS 14587). The back of the panels are

perforated with a nonwoven fabric covering of 0.2mm for Sqm 58.8 7000 411600.00

providing Sound absorption via the acoustic impedance method.

Panel is fixed by using GI Framework 2400mmx50mmx0.50mm

spaced at 600mmx600 c/c & 12 mm WPC framework spaced at

400mm centers with suitable brackets and the system is backline

with 50 mm Rockwool insulation@48kg density and along with all

accessories example: chicken mesh and all.

Digitally signed by GOUTAM

5.5 NSR Providing and fixing of 6mm thick lacquer glass SGG Planilaque

glass of approved color by architect/ Client with SGG Planifix

silicon on perfectly leveled water proof non-conventional plywood

(preferably marine plywood) of minimum 12mm thickness

mounted on the RCC wall/any other structure. The SGG

Planilaque lacquered glass to be of 6mm thick highly durable,

humid resistance, poly urethane lacquer glass. The Planilaque

glass should be manufactured by industrial curtain coating

process. It should meet quality standards as per BS EN 1036

1999 & confirms to PERSOZ hardness test of at least 220

oscillations. The substrate of the glass should conform to

Standard BS EN 572 1995 parts 1 and 2: Glass in Building – Basic

soda lime silicate glass products. Planilaque lacquered glass to be

manufactured to right specifications, relating to consistency of

color, opacity and homogeneity throughout production campaigns

and also to the ageing properties, mechanical resistance, and

resistance to humidity and to chemical agents of the lacquer. The

color of the lacquer should remain stable when exposed to normal

levels of ultra-violet light in interior applications.

5.6 NSR Providing and Fixing Custom Print Roller Blinds- Top Tube

extruded by none rusting Aluminium alloy with 1.25 mm

thickness in 32, 38 & 45 mm diameters respectively.Control unit

mechanism made by high strength ABS plastic,The Universal

Brackets are made by mild steel with powder coating to give

greater finish. Blackout Fabric made of PES100% with acrylic

coating resistant to Cracking & Fraying.Ball chain made by

unbreakable Polyethylene plastic, 1.50 mm Nylon cord with 4.50

mm balls, Fabric covered Rectangle Bottom Channel.

Min. printing area 300mm x300mm , Max. Printing area

FLOORING WORK TOTAL 3423484.78 786000.00

6.0 SUB HEAD-VIII :- PAINTING AND FINISHING WORK

6.1 13.4 12mm cement plaster of mix :

6.2 13.5 15 mm cement plaster on the rough side of single or half brick

Digitally signed by GOUTAM

6.3 13.11 18 mm cement plaster in two coats under layer 12 mm thick

cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top sqm 100 518.55 51855.00

layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

6.4 13.80 Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over the

plastered wall surface to prepare the surface even and smooth sqm 300 156.05 46815.00

6.5 13.62 Painting with synthetic enamel paint of approved brand and

manufacture of required color to give an shade.

13.62.1 Two or more coats on new work including priming coat of ordinary

paint approved brand.

6.6 NSR Finishing with plastic emulsion paint of approved brand and

manufacture of required color to give an shade.Two or more coats

applied on walls @ 1.25 ltr/10 sqm over and including one coat of sqm 300 220 66000.00

Special primer applied @0.75 ltr /10 sqm

PAINTING AND FINISHING WORK TOTAL 176146.38 66000.00

7.0 SUB HEAD-X :- ROOFING & FALSE CEILING WORK

7.1 Providing & Fixing of Fiber Acoustical Suspended Ceiling System

Glass Fiber Micro look/Square EDGE TILES WITH 15mm black

silhouette Exposed Groove Grid. The tiles should have Humidity

Resistance (RH) of 95%, NRC 0.90, Colour Black & white, Light

Reflectance >84% with Fire Resistance in module size of

595x595x 15 mm. The grid should be of 15mm grid sections i.e.

the Main Runner 3000mm in 38 mm web height, 1200 mm & 600

mm Cross Tees in web height of 26mm with thickness

0.3mm.Installtion to be comprise main runner spaced at 1200mm

centre securely fixed to the structural soffit using suspension

system at 1200mm maximum centre. The First/Last suspension

system at the end of each main runner should not be greater than

450mm from the adjacent wall. Flush fitting 1200mm long cross

tees to be interlocked between main runners at 600mm centre to

form 1200 x 600 mm module. Cut cross tees longer than 600mm

require independent support. 600 x 600mm module to be formed

by fitting 600mm long flush fitting cross tees centrally between

the 1200 mm cross tees. Perimeter trim to be wall angles of size

3000x19x19mm, secured to walls at 450 mm maximum centres

and as per the drawing and the work complete in all respects to

the satisfaction of Engineer in-charge. accessories consisting of

HLC Sleeve Anchor Fasteners of thread size 6.5mm x 25/5 with

Soffit Cleat made of Galvanized steel of size 27 x 37 x 25 x

Digitally signed by GOUTAM

7.2 Providing & fixing false ceiling at all height including providing &

fixing of framework made of special section, power pressed from

M.S. sheets and galvanised with zinc coating of 120 gms/ sqm

(both side inclusive) as per IS : 277 and consisting of angle cleat

of size 25mm wide x 1.6mm thick with flanges of 27mm and

37mm, at 1200mm c/c, one flange fixed to the ceiling with dash

fastener 12.5mm dia x 50mm long with 6mm dia bolts, other

flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of

required length with nuts & bolts of required size and other end of

angle hanger fixed with intermediate G.I chanels 45 x15 x

0.90mm running at the spacing of 1200 mm c/c, to which the

ceiling section 0.5mm thick bottom wedge of 80mm with tapered

flanges of 26 mm each having lips of 10.5mm, at 450mm c/c,

shall be fixed in a direction perpendicular to G.I intermediate

channel with connecting clip made out of 2.64mm dia x 230mm

long G.I wire at every junction, including fixing perimeter

channels 0.50mm thick 27mm high having flanges of 20mm and

30mm long, the perimeter of ceiling fixed to wall/ partitions with

the help of Rawl plugs at 450mm centre, with 25mm long dry wall

screws @ 230mm interval, including fixing of Calcium Silicate

Board to ceiling section and perimeter channels with the help of

dry wall screws of size 3.5 x25mm at 230mm c/c, including

mm thick CalciumtoSilicate

of tapered and square &edges

with Calcareous

12.59.1 Siliceous materials reinforced with cellulose fiber manufactured cum 78.90813 1572.3 124067.24

through autoclaving process.

ROOFING & FALSE CEILING WORK SUB HEAD TOTAL 124067.24 2051611.25

Digitally signed by GOUTAM

VICTORIA COFFEE TABLE Providing, placing and supplying of

Materials & SIZE :

Material: Plywood+ MDF + Solid wood legs

Color : Dark Wenge

Top Material: Plywood+ MDF

Frame Material: Plywood+ MDF

Leg Material: Solid wood ( Rubber wood)

Shoe material: Polypropylene

8.1 NSR Mode of Supply Each 3 21743 65229.00

Top Dimension: 1200X600X18

Thickness of frame: 18

Thickness of understructure Legs: 68 (+/- 5)

Weight / unit (KG): 22 KG (+/- 4)

Overall LxWxH: 1200X600X455

VEGAS CORNER TABLE Providing, placing and supplying of

Net Weight (kg) - 9.4

Sales Package - 1 Corner Table

Warranty - 1 Year

Maximum Load Capacity (kg) - 20

Wheels Included - No

Delivery Condition - Knock Down

8.2 NSR Dimensions W x H x D (mm) - 450 x 530 x 400 Each 4 11848 47392.00

• Tempered Glass Top with 8

• UV disc attached to the base

with transparent glue.

• Base material is made of

fiberglass reinforced plastic.

Digitally signed by GOUTAM

WORKSTATION 1200X600 WITH FABRIC SCREEN & WHITE

BOARD HAVING KEYBOARD TRAY, CPU TROLLEY &

PEDESTAL Providing workstation for office having size of

1200x600 having thickness as 52.4 mm thk and ht - 1200

including powder coated aluminium trims. Tiles on main spine:

Top tiles are fabric tackable tile. Bottom tiles - Plain metal. Tiles

on main spine: Top tiles are fabric tackable tile. Bottom tiles -

Plain metal. INTERMEDIATE BLOCKS on main spine Intermediate

blocks are given in DL + DL finish. Wire Management through

8.3 NSR main spine- Wires shall be taken into the system through cable Each 9 90028 810252.00

ducts from the junction boxes and it is carried upto the panels

through concealed conduits inside the blocks. Legs - Metal

powder coated legs at the end and shared condition. System shall

also have 120 mm high powder coated standalone panel legs to

give the system an elevated look. Worksurface - out of 25 mm

thk prelam particle board with flat pvc lipping edge banding of

size 1200 mm w x 600 mm d. CPU Trolley & Keyboard tray metal

REJOICE 3 STR SOFA FOR WAITING AREA Providing, placing

and supplying of sofa:

Dimensions W x H x D (cm)-176.5 x 83.5 x 81.5

• Material : PVC

• Shade : Coffee Brown

• Thickness : 1 mm

• Material : Pine Wood

• Moisture content : 10 - 12 %

• Thickness of Plywood used : 12 mm & 18 mm

• Material : Slab stock

• Density : 32 kg/m3 at seat

• Conjugated hollow fiber (recron)

• Conjugated hollow fiber (recron)

• Material : Nylon

• Material : PVC

Digitally signed by GOUTAM

8.5 BAYFLOW 2 STR SOFA Providing, placing and supplying of sofa:

Dimensions W x H x D (cm)-176.5 x 83.5 x 81.5

• Material : PVC

• Shade : Coffee Brown

• Thickness : 1 mm

• Material : Pine Wood

• Moisture content : 10 - 12 %

• Thickness of Plywood used : 12 mm & 18 mm

• Material : Slab stock

• Density : 32 kg/m3 at seat

• Conjugated hollow fiber (recron)

• Conjugated hollow fiber (recron)

• Material : Nylon

• Material : PVC

8.6 THRILL FABRIC VISITOR CHAIR Providing, placing and

supplying of visitor chair:

1) THRILL CHAIR UPPERSTRUCTURE: It is a single shell 1.2

±0.1cm. thick hot pressed plywood

with moulded polyurethane foam on top & backing foam on rear

side. It is upholstered with option

of knitted & leatherette fabric.The seat has extra thick foam on

front edge to give comfort to

popliteal area.The foam backing done in back ( Executive chairs

only) for extra fluffiness and

comfort in chair.

2) SEAT & BACK HIGH RESILIENCE (HR) POLYURETHANE FOAM

:The HR polyurethane foam

for seat and back is moulded with density 45 +/-2 kg/m³ and

Hardness load 16 ± 2 kgf as per

IS:7888 at 25% compression.

3) M.S. VISITOR TUBULAR FRAME (For Thrill Visitore chair): The

powder coated (DFT 40-60

micron) tubular frame is cantilever type & made of Ø2.54±0.03

cm x 0.2±0.016 cm thk MS ERW

NSR 4)ARMRESTS:The armrest top is moulded from polyurethane(PU)

with metal insert and mounted

Digitally signed by GOUTAM

8.7 FINNESSE TABLE FOR PA ROOM Supplying and placing in

position Main table of the following specifications.Its size shall be

1650 Width mm x 900 Depth mm x 740 Height mm .Table top

shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm

thick post formed laminate and 1 mm thick backing laminate

(bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The

modesty shall be 18 mm thick plain particle board ( ) PPB Clad

with 1.0 mm thick decorative laminate (DL) on both sides. Edge

Sealed with 2 mm thick PVC beading.

Supplying and placing in position Free Standing Pedestal of the

following specifications with Overall Dimensions shall be

390mm(W)x440mm(D)x646mm(H). The construction & Material

used shall be welded assembled , 0.8 mm thick CRCA for body

shell , drawer front & tray , front side stiffener ,rear aide stiffener

and 1.2 mm thick CRCA Top stiffener & Bottom stoffener . The

drawer fronts shall be metal front straight edge . Locking shall be

10 lever cam lock & Central RH locking with actuator & lock

channel mechanism for box-box-file Pedestal . The top panel shall

be metal straight edge top . Castor should be swiveling non -

lockable castors mounted below the body shell for free standing

full height mobile pedestal and M8 Leveling stud for free standing

NSR pedestal . The anti-tipping mechanism shall have fifth roller

arrangement mounted below file drawer to avoid toppling of unit

8.8 STORWEL ALMIRAH FOR STORES Providing, supplying and

placing of storage unit.

Overall size Shall be 916mm(W)x486mm(D)x1981mm(H) with

welded construction. It should have the shelf thickness of 0.7

mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high

yield strength) and all other components shall have a thickness of

0.9mm. These components shall be made of CRCA ‘D’ grade high

yield strength as per IS:513. It should have a Mazak handle and

Three way locking mechanism with Shooting Bolts. It should have

a height wise adjustable shelf mounting which shall have a Each 6 33090 198540.00

Uniformly Distributed Load Capacity of max 40 Kg. It should also

have a M10 Screw type Leveller with Hex plastic base. The

finishing shall include Epoxy powder coated to the thickness of 50

microns (+/- 10). Plenty of colour options and shelving options

shall be available.

The product should be certified by GreenGuard, IAQ Gold,

GreenPro & GRIHA

Digitally signed by GOUTAM

8.9 THRILL HIGH BACK MESH CHAIR Providing, supplying and

placing of High Back Chair. SEAT/BACK ASSEMBLY: The seat is

made up of 1.5 ±0.1cm. thick hot-pressedplywood and

upholstered with fabric upholstery covers and moulded

Polyurethane foam.The seat has extra thick foam on front edge to

give comfort to popliteal area.

The Back is injection moulded in glass filled Polypropylene which

is upholstered withMesh fabric.The back consist of adjustable

lumbar support made of injection mouldedPolypropylene having

an adjustment of 5.0 ±0.1 cm.

The chair seat & back size are

*SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0

HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR

polyurethane seat foam is moulded with density 45±2 kg/m³ and

hardness 16±2 kgf as per IS:7888 for 25% compression.

ARMRESTS :The adjustable armrest is designed with the following

features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)

· Armrest top is mounted on Armrest structure made of glass

filled Nylon· Armrest Top is PU moulded over glass filled Nylon

NSR CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The

8.10 mechanism

Water isdesigned with the following features:

Supply & Installation of 120 litre cooling and storage capacity

with inbuid RO Plant/system with SS body and all connections Each 1 192259 192259.00

NSR water/electrical all complete in all respect.

SUB HEAD FURNITURE TOTAL 0.00 1847466.00

S. H. - INTERNAL ELECTRICAL WORK

1.0 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit, with

modular switch, modular plate, suitable GI box and earthing the

point with 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable etc. as required.

2.0 1.55 Wiring for group controlled (looped) light point/fan point/exhaust

fan point/ call bell point ( without independent switch etc.) with

1.5 sq. mm FRLS PVC insulated copper conductor single core

cable in surface/ recessed PVC conduit, and earthing the point

with 1.5 sq. mm FRLS PVC insulated copper conductor single core

cable etc. as required.

Digitally signed by GOUTAM

3.0 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed medium

class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated

copper conductor single core cable for loop earthing as required. Meter 150 334 50 100

4.0 1.13 Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed medium

class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated

copper conductor single core cable for loop earthing as required. Metre 50 537 26 850

5.0 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single

core cable in surface/ recessed medium class PVC conduit as

CIRCUIT / SUBMAIN WIRING

5.1 1.14.1 2x1.5 sq mm + 1x1.5 sq mm earth wire Meter 150 233 34 950

5.2 1.14.2 2x2.5 sq mm + 1x2.5 sq mm earth wire Meter 125 275 34 375

5.3 1.14.5 2x10 sq. mm + 1x6 sq. mm earth wire Meter 10 570 5 700

5.4 1.14.11 4x16 sq mm + 2x6 sq mm earth wire Meter 30 1 365 40 950

6.0 1.31 Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and

fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps

modular switch, connection etc. as required. Each 35 477 16 695

7.0 1.32 Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and

fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16

amps modular switch, connection etc. as required. Each 12 586 7 032

8.0 1.56 Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providng and

fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A

modular switch, connections etc. as required. (For light plugs to

be used in non residential buildings). (For UPS Supply) Each 3 676 2 028

9.0 1.24 Supplying and fixing following modular switch/ socket on the

existing modular plate & switch box including connections but

excluding modular plate etc. as required.

9.1 1.24.7 TV anteena Socket Outlet Each 2 148 296

10.0 1.27 Supplying and fixing following size/ modules, GI box alongwith

modular base & cover plate for modular switches in recess etc as

10.1 1.27.1 1 or 2 Module (75mmX75mm) - For Telephone,TV outlet & Data Each 10 298 2 980

10.2 1.27.2 3 Module (100mmX75mm) - For Socket outlet. Each 5 327 1 635

10.3 1.27.3 6 Module (200mmX75mm) - For Socket outlet. Each 2 343 686

Digitally signed by GOUTAM

11.0 2.3 Supplying and fixing following way, single pole and neutral, sheet

steel, MCB distribution board, 240 V, on surface/ recess,

complete with tinned copper bus bar, neutral bus bar, earthbar,

din bar, interconnections, powder painted including earthing etc.

as required. (But without MCB/RCCB/Isolator)

11.1 2.3.3 12 Way, Double Door Each 1 2 315 2 315

12.0 2.4 Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 volts, on

surface/recess, complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/Isolator).

13.0 2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C

series Miniature Circuit Breaker suitable for inductive loads of

following poles in the existing MCB DB complete with connections,

testing and commissioning etc,as required.

13.1 2.10.1 Single pole Each 26 256 6 656

15.0 NON Supplying and fixing following rating, double pole, 240 volts, MCB

DSR complete with connections, testing and commissioning etc. as

15.1 NON 40 Amp

16.0 NON Supplying and fixing following rating, four pole, 415 volts, MCB

DSR complete with connections, testing and commissioning etc. as

16.1 NON 63 Amp

17.0 2.14 Supplying and fixing of following rating double pole (Single phase

and neutral) 240 volts, residual current circuit breaker (RCCB),

having a current sensivity current 30 miliampere in the existing

MCB DB complete with connections, testing & commissioning etc.

18.0 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm

solid copper conductor PE insulated, shielded with fine tinned

copper braid and protected with PVC sheath in the existing

surface/ recessed steel/ PVC conduit as required. Meter 10 47 470

19.0 1.21 Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including cutting

the wall and making good the same in case of recessed conduit as

Digitally signed by GOUTAM

20.0 2.23 Supplying and fixing Cable End Box (Loose wire box) (IP 43)

suitable for following single pole and neutral, sheet steel, MCB

distribution board, 240 V, on surface/ recess, complete with

testing and commissioning etc. as required.

20.1 2.23.4 For 14 way, Double door SPN MCBDB Set 1 902 902

21.0 2.24 Supplying and fixing Cable End Box (Loose wire box) (IP 43)

suitable for following triple pole and neutral, sheet steel, MCB

distribution board, 415V, on surface/ recess, complete with

testing and commissioning etc. as required.

21.1 2.24.3 For 8way, Double door TPN MCBDB Set 1 1 340 1 340

22.0 1.41 Installation, testing and commissioning of pre-wired, fluorescent

fitting / compact fluorescent fitting/ LED fittings of all types,

complete with all accessories and tube/lamp/ LED etc. directly on

ceiling/ wall/ false ceiling with GI Chain included for fixing

wherever required, including connections with 1.5 sq. mm FRLS

PVC insulated, copper conductor, single core cable and earthing

etc. as required.

23.0 NON Supply of following sizes of ISI marked aluminium conductor

DSR XLPE insulated cable as per IS 7098, armoured, served, sheathed

1100 volts grade. (Cable shall be purchased only after approval of

cable schedule by architect / consultant).

23.1 NON 4 core, 16 sq.mm

23.2 NON 4 core, 10 sq.mm

24.0 7.8 Laying and fixing of one number PVC insulated and PVC sheathed

/ XLPE power cable of 1.1 KV grade of following size on cable tray

24.1 7.8.1 Upto 35 sq. mm (clamped with cable tie) Meter 80 45 3 600

25.0 9.1 Supplying and making end termination with brass compression

gland and aluminium lugs for following size of PVC insulated and

PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade

26.0 4.6 Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray (Galvanisation thickness not less than

50 microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.I. suspenders including G.I. bolts & nuts, etc. as required.

26.1 4.6.1 100 mm wide x 50 mm depth x 1.6 mm thickness. Meter 15 669 10 035

Digitally signed by GOUTAM

27.0 4.7 Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray "bends" (galvanisation not less than 50

microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.I. suspenders including G.I. bolts & nuts, etc. as required.

27.1 4.7.1 100 mm wide x 50 mm depth x 1.6 mm thickness. Each 2 1 159 2 318

28.0 4.8 Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray "Tee" (galvanisation not less than 50

microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.I. suspenders including G.I. bolts & nuts, etc. as required.

28.1 4.8.1 100 mm wide x 50 mm depth x 1.6 mm thickness. Each 2 1 327 2 654

29.0 4.9 Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray "Cross member"(galvanisation not less

than 50 microns) with perforation not more than 17.5%, in

convenient sections, joined with connectors, suspended from the

ceiling with G.I. suspenders including G.I. bolts & nuts, etc as

29.1 4.9.1 100 mm wide x 50 mm depth x 1.6 mm thickness. Each 1 1 327 1 327

30.0 4.10 Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray “Reducer” (galvanisation not less than

50 microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

G.I. suspenders including G.I. bolts & nuts, etc. as required.

30.1 4.10.1 100 mm wide x 50 mm depth x 1.6 mm thickness. Each 1 1 655 1 655

31.0 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in

recess for connections etc. as required. Meter 30 244 7 320

32.0 1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the

existing surface/ recessed Steel/ PVC conduit as required.

32.2 1.53.2 2 run of cable Metre 100 96 9 600

TOTAL FOR S.H.-I 4 65 749 25 661

S. H. - LIGHT FIXTURE

Digitally signed by GOUTAM

1.0 NON Supply ofof surface mounted LED Downlighter made of pressure

DSR die cast alu. housing, LED Used shall be SMD type and fixture

should have minimum efficacy >=100lumens/watt with Minimum

system Lumens 1500 with maximum system wattage of 15W Life

of fixture (Including Driver) : 50000 burning Hrs. @ L70B50

Lumen maintenance, CCT of 6500K, CRI >80, PF >0.9, Minimum

Internal Surge Protection 2.5KV & , The fixture should comply

with the parameters as per IS10322. The LED driver should

comply to IS 15885 sec 13 for Harmonics, IS 10322 for Electrical

Safety. LM 79 and LM80 reports need to be submitted from a

NABL/UL accredited lab to verify above parameters. Similar to

LDSER or Equivalenlt in (Philips / Bajaj / Havells)

2.0 NON Supply of Recess LED Downlighter made of pressure die cast alu.

DSR housing, LED Used shall be SMD type and fixture should have

minimum efficacy >=100lumens/watt with Minimum system

Lumens 1000 with maximum system wattage of 10W Life of

fixture (Including Driver) : 50000 burning Hrs. @ L70B50 Lumen

maintenance, CCT of 6500K, CRI >80, PF >0.95, Minimum

Internal Surge Protection 2.5KV & , The fixture should comply

with the parameters as per IS10322. The LED driver should

comply to IS 15885 sec 13 for Harmonics, IS 10322 for Electrical

Safety. LM 79 and LM80 reports need to be submitted from a

NABL/UL accredited lab to verify above parameters. Similar to

venus or Equivalenlt in (Philips / Bajaj / Havells)

3.0 NON Supply of Integral LED 2 ft IP20 Batten with PC housing and PC

DSR cover. The luminaire should have CCT of 5700K. Luminaire shall

be designed to emit at least 1000 nominal lumens at a system

efficacy of greater than 100 lumen/watt with maximum input

power of 9± 1 Watt. The luminaire shall be designed so as to

ensure lumen depreciation of up to 30% over 50k burning hours

@ design ambient temp 45 deg C. The electronic driver used shall

have a power factor >0.9 The fixture should comply with the

parameters as per IS10322. The LED driver should comply to IS

15885 sec 13 for Harmonics, IS 10322 for Electrical Safety. LM 79

and LM80 reports need to be submitted from a NABL/UL

accredited lab to verify above parameters. Similar to LBLN-10-C-

SQ or Equivalenlt in (Philips / Bajaj / Havells)

Digitally signed by GOUTAM

4.0 NON Supply of Integral LED 4 ft IP40 Batten with powder coated Al

DSR housing and PC cover. The luminaire should have CCT of 5700K.

Luminaire shall be designed to emit at least 2000 nominal lumens

at a system efficacy of greater than 100 lumen/watt with

maximum input power of 19± 1 Watt. The luminaire shall be

designed so as to ensure lumen depreciation of up to 30% over

50k burning hours @ design ambient temp 45 deg C. The

electronic driver used shall have a power factor >0.9 The fixture

should comply with the parameters as per IS10322. The LED

driver should comply to IS 15885 sec 13 for Harmonics, IS 10322

for Electrical Safety. LM 79 and LM80 reports need to be

submitted from a NABL/UL accredited lab to verify above

parameters. Similar to LBLN-20-C or Equivalenlt in (Philips /

Bajaj / Havells)

5.0 NON Supply of 4 ft deep recessed linear standalone luminaire with

DSR downward distribution, made up of extruded Al housing with

tapered external reflector options of Rose Gold with Al silver

housing/High gloss gold with Matt black housing/High gloss Silver

with matt black housing, and with customisable finish to

enhance/match interiors. The luminaire shall be of 65mm width x

100mm height, with minimum system lumen of 2600lm and with

system efficacy of >=120lm/W. The life of fixture shall be 50000

burning hours @L70B50 lumen maintenance, CCT 4000K,

SDCM<5, CRI≥80, PF≥0.95,THD≤10%, an Operating working

temp range : 0°C < Ta < 45°C & operating Voltage Range of 140-

270 V AC. Minimum Internal Surge Protection 3.5KV. The fixture

design should comply to IEC61000-3-2 ed.3.2, 2009 for

Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-

1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for

performance and IEC61547 ed.2.0, 2009. The luminaire driver

shall be of the same make/manufacturer as that of LED

luminaires. Manufacturer shall have inhouse lab approved by

NABL or ministry of science of govt of India. LM 79 and LM80

reports need to be submitted from a NABL/UL accredited lab to

verify above parameters. Both the fixture and Driver should have

separate BIS approval.. Similar to LBLN-36-C-Al Nos. 26 11 468 2 98 168

Digitally signed by GOUTAM

6.0 19.1 Supply, Installation, Testing and Commissioning of 1200 mm

sweep, BEE 5 star rated, ceiling fan with Brush Less Direct

Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm

long down rod, 2 nos. canopies, shackle kit, safety rope, copper

winding, Power Factor not less than 0.9, Service Value (CM/M/W)

minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM

(tolerance as per IS : 374-2019), THD less than 10%, remote or

electronic regulator unit for speed control and all remaining

accessories including safety pin, nut bolts, washers, temperature

rise=75 degree C (max.), insulation resistance washers,

temperature rise=75 degree C (max.), insulation resistance more

than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC

Supply, earthing etc. complete as required.

7.0 NON Supply, Installation, Testing and Commissioning of 250 mm

DSR sweep decorative Fresh air fan with all accessories suitable for

operation single phase 230 volt 50 cycle per second per sec. AC

supply etc. as required. in the existing opening, including making

the hole to suit the size of the above fan, making good the

damage, connection, testing, commissioning earthing etc. as

TOTAL FOR S.H.-II 10 378 3 35 929

S. H. - DATA, TELEPHONE SYSTEM INCLUDING ACTIVE

III COMPONENTS

1.0 NON Supply, Installation, Testing & Commissioning of Patch Panel Cat

DSR 6 U/FTP 24 Port- Loaded as per technical specification. Nos. 2 16195 32 390

2.0 NON Supply, Installation, Testing & Commissioning of Patch Cord Cat 6

DSR U/FTP 3 feet as per technical specification. Nos. 25 447 11 175

3.0 NON Supply, Installation, Testing & Commissioning of Patch Cord Cat 6

DSR U/FTP 7 feet as per technical specification. Nos. 8 1005 8 040

4.0 NON Supply, Installation, Testing, Commissioning of Cat 6, 10G,

DSR U/FTP, Information Outlet including G.I. Box and modular cover

plate as per technical specification. Nos. 33 949 31 317

5.0 NON Supply , Installtion , Testing and comissioning of 12U wall

DSR mount rack with fans , 2 cable managers, satationary shelf , 2

Nos of hardware pkts as per technical specification. Nos 1 20104 20 104

6.0 NON Supply, Installation, Testing & Commissioning of 24 port

DSR 10/100/1000Mbps, 4SFP module, L-2 Switch, POE as per

technical specifications. Each 2 75949 1 51 898

7.0 NON Supply, Installation, Testing & Commissioning of Type Basic

DSR Phone account , Full duplex speaker phone, . Nos 6 3574 21 444

8.0 NON Supply, Installation, Testing & Commissioning of SFP+

DSR 10GBASE-SR 10 Gigabit Ethernet Optics, 850 nm for up to 300

m,transmission on multimode fiber (MMF). Nos 2 53053 1 06 106

Digitally signed by GOUTAM

9.0 NON Supply, Installation, Testing & Commissioning of 6 Core

DSR OM4 Multimode Fiber Cable as per technical specification. Meter 20 335 6 700

10.0 NON Supply, Installation, Testing & Commissioning of 24 Port

DSR LC multimode loaded LIU. Nos 8 12844 1 02 752

11.0 NON Supply, Installation, Testing & Commissioning of LC - LC

DSR Fiber patch cord OM4, 3 Mtrs. Nos 8 15637 1 25 096

12.0 NON Supply, Installation, Testing & Commissioning of 6 Core, Single

DSR Mode, OS2 as complete as required. Meter 20 279 5 580

TOTAL FOR S.H.-III 6 22 602

S. H. - AV SYSTEM

1.0 NON Supply, installation, testing & commissioning of 85" Professional

DSR Ultra HD Display Panel, 4K UHD (3840 X 2160) Resolution,

Brightness 500 Cd / m2 or more, Android 11.0 based SOC with

Quad Core Processor, 4GB RAM, 32GB Memory, Interface: 2 HDMI

2.0 or more inputs, 1 DisplayPort 1.2 or more input, 1 USB 3.0 or

more , 1 USB 2.0 or more, Ethernet, RS232, 1 Audio Out, Digital

Audio Out, 1 HDMI 2.0 Out, 24W or more built-in Speaker, 24/7

operation, RS232 and LAN Control, OSD and UI rotation, USB

Auto play function, Multi functional USB Type C (for Audio, Video,

Network, Microphone, 65W charging, Camera connectivity),

Wireless Screen sharing with Airplay, Miracast and Mirroring,

PIP/PBP support, Landscape and Portrait mode, Instant mobile

content ransfer, OPS Slot available, BIS Certified etc all complete

2.0 NON Supply, installation, testing & commissioning of Cable Cubby Type

DSR 2 with flip top, cover and multi-format cables, 2 Universal Power,

2 USB Charger, 1 HDMI, 1 USB-C, 1 Ehternet Cable, 1 Telephone

Cable / Voice Connector, made of steel and aluminium etc all

3.0 NON Supply, installation, testing & commissioning of Wireless

DSR presentation module, Native protocols: Airplay, Google Cast,

Miracast, Maximum number of simultaneous connections (with

Buttons and/or App): 32, Local view, Management and reporting,

Frequency band: 2.4 GHZ and 5 GHz, LAN & WiFi, 4K UHD output,

USB-A and USB-C port, 100% secure, encrypted and cloud-

managed with Two buttons, no cables, no software to download

needed etc all complete

Digitally signed by GOUTAM

4.0 NON Supply, installation, testing & commissioning of Universal

DSR Switcher with HDMI and USB-C connectivity Type 2, 2 HDMI

Inputs, 2 USB-C connectivity (4K Video, Audio, Data, Power

charge), 2 HDMI Outputs, 4 USB-A 3.0 Connection (for USB

Devices), 2 USB-B 3.0 Connection (for PC hosts), USB host

switching, Analog audio de-embedding, Charging via USB-C up to

60w, Supports HDMI 4K signal formats (4K UHD @60Hz RGB

4:4:4, up to 18 Gbps), DP Alt Mode, HDMI 2.0, HDMI 1.x, DVI

Signal Support, HDCP 1.x, HDCP 2.2 support (Combination of

same make devices are allowed to achieve given specification) etc

5.0 NON Supply, installation, testing & commissioning of Unified

DSR Communication Bar (All in One) with BYOD Type 1, Built-in dante

integration, Should have Built-In DSP which automatically

optimizes room acoustics, Integrated Beamforming microphone, 6

Nos. of MEMS capsules with pickup range of 4.5 m or more,

Should have 4K ePTZ camera, 5x digital zoom with automatic

framing and person tiling feature, Built-in Class D amplifier with 4

Nos. of 40 W full range speaker, Should have 2 HDMI, 1 USB

Type-C (3.1), 1 USB Type-A (3.1), Dual Ethernet ports, Bluetooth

5.1 and IEEE 802.11a / b / g / n / ac Wi-fi standard, Zooms and

Teams certified, High-precision audio settings for maximum

control, setting to exclude (min 3) and prioritize the areas of the

room, which automatically focuse on the person speaking in the

room, One Priority Zone and up to three Exclusion Zones shall be

adjustable, should be controlled through centralized monitoring

software along with IR remote control and mounting kit etc all

complete as required.

6.0 NON Supply, installation, testing & commissioning of Round Ceiling

DSR Mounted Beamforming Microphone Array, shall consist of 15 pre-

polarized condenser microphone capsules, shall use beamforming

technology that automatically focuses on whoever is speaking in

the room and always follows the person around the room,

microphone array shall have a Dante interface for digital audio

output, supporting both single-cable (PoE + Control + Dante) and

split mode cabling (PoE + Ctrl / Dante) on a second RJ45 port,

Microphone sensitivity shall be 0 dBV/Pa (1020 mV/Pa). Maximum

sound pressure level shall be 98 dB SPL, Dynamic range shall be

81 dB(A), including a flush-mount installation kit etc all complete

Digitally signed by GOUTAM

7.0 NON 2 Meter Premium High Speed HDMI 2.0b flexy cable, Bandwidth

DSR up to 18Gbps, Up to 4096 x 2160 @ 6 0Hz at RGB 4:4:4 video

resolution, Support High Dynamic Range (HDR10), Dolby Vision

and Hybrid log–gamma (HLG) video, Consumer Electronics

Control (CEC), Audio Return Channel (ARC) and HDMI Ethernet

Channel (HEC) etc all complete

8.0 NON 2 Meter Full-featured Type-C ProAV cable 4K Video; USB 2.0 &

DSR 3.2 Gen 2x2 Data; 100W/5A PD Charging, 4 Lane Displayport Alt

mode (4K60FPS Video and Audio), USB3.2 Gen 2x2 20Gbps

(10Gbps/lane) "SuperSpeedPlus" (4K Webcam, SSD storage) etc

9.0 NON Supply, installation, testing & commissioning of 10 Meter

DSR Premium High-Speed HDMI 2.0b Hybrid Optical Active Cable,

Bandwidth up to 18Gbps, Up to 4096 x 2160 @ 60 Hz at RGB

4:4:4 video resolution, Supports EDID, HDCP2.2, HDR, CEC, ARC

etc all complete as required.

10.0 NON Supply, installation, testing & commissioning of 10 Meter HUSB

DSR 3.1 Gen1 SuperSpeed Active Extension Cable TypeA/male to

TypeA/female, Native USB2/USB1 and USB3 extension,

Supporting peripherals via USB 2.0 up to 480 Mbps (Mouse,

Keyboard, Thumb Drive, Speakerphone and Webcam), Plug and

play compatible with PC, Mac, and Linux etc all complete as

11.0 NON Supply, installation, testing & commissioning of Connector and

DSR Accessories (such as USB Patch cord cable, USB-HUB, USB-C to

HDMI Adaptor etc) etc all complete as required.

TOTAL FOR S.H.-IV 28 13 759

GRAND TOTAL OF ELECTRICAL AND LV WORK 4 76 127 37 97 951

GRAND TOTAL OF ELECTRICAL AND LV WORK 4 76 127 37 97 951

SUB-HEAD 'A' - AIR CONDITIONING EQUIPMENTS HIGH

SIDE (VRV/VRF SIDE)

1.0 AIR COOLDED VARIABLE REFRIGERANT VOLUME/FLOW

AIR CONDITIONING SYSTEM

Digitally signed by GOUTAM

Supply, Installation, testing and commissioning of air cooled

Variable Refrigerant Volume/Flow modular type air-conditioning

system Invertor Controlled with step less modulation complete

with indoor and outdoor units, individual remote controller and

centralized controller, interconnected refrigerant piping ,full

charge of refrigerant gas & oil, control cabling etc.as per detail

given in specifications and having following items: Refrigerant to

be used shall be - R - 410 A.

1.1 OUTDOOR UNIT

DSR- Supply, Installation, testing and commissioning of Both Cooling

VRF/V & Heating Modular type outdoor units suitable to operate at 415

RV- ± 10 % volt, 50 Hz, 3 phase AC supply and suitable for cooling &

2019 Heating application by using 100 % inverter driven capacity

control compressors (Hermetically sealed scroll type) with

stepless modulation complete with special acryl precoated heat

exchanger, microprocessor based Controller, top discharge type

condensing unit(s), low noise condenser fan , auto check function

for connection error in display panel, auto address setting as per

specifications. Complete Set (Indoor and Outdoor) of equipment

testing shall be done in the presence of client representative at

AHRI Conditions without any extra cost. The units shall be

complete with necessary mounting frames and capacity as

mentioned below and as per specification.

The compressor should be of same manufacturer as of outdoor

units. The unit shall have auto phase corrector so that unit can

work in case of phase reversal and accumulator should be present

in outdoor units to prevent liquid backflow in compressor. For

better energy efficeincy and power saving the COP of ODU should

be minimum 3.8 at AHRI conditions. The Unit shall be equipped

with an oil recovery system to ensure stable operation with long

refrigeration piping lengths. The system must be provided with oil

balancing circuit to avoid poor lubrication.

Outdoor Unit Shall operate between -50c to 500c for Cooling

Mode and -250c to 150c for Heating mode.

Energy efficiency ratio (EER) Shall be not less than 5.5 at 50%

part Load Condition

The machine must have a sub cool feature to use coil surface

more effectively through proper circuit/bridge so that it prevents

the flushing of refrigerant from long piping due to this effect

thereby achieving energy savings.

Digitally signed by GOUTAM

The outdoor unit should be fitted with low noise level and should

not be more than 65 db (A) at normal operation when measured

at a point 1 mtr. In front of the unit at a height of 1.5 mtr. The

outdoor unit shall have feature to change the evaporative

temperature form apprx 6 deg C to 11 Deg C with respect to load

for better comfort and energy efficiency. (VRT-Variable refrigerant

temperature technology). The systems shall have free phase

technology & operation shall be continuous in case of phase

reverse in supply electricity.

The cost should include the following :

Nitrogen pressure testing for refrigerant pipe leakages & flushing

during installation & after commissioning between IDU & ODU

with flare nuts. Refrigerant gas & oil charging as per OEM

Necessary corrosive treatment of copper coil of the ODU with

Aluminium hydroxide, 25 microns thickness or equivalent coating

as per manufacturer standard to protect from corrosion, sulphur

and other chemical contaminants present in the air. The coating

should be done in the presence of OEM representative. The

coating shall be carried-out by the authorized applicator of

coating manufacturer.

Note : The ODU provided with cowl duct for exhaust air should

have minimum 5 mm ESP. GI wire mesh (minimum 16 SWG

thickness) type bird screen with framing at the Mouth of exhaust

air Cowl duct of Outdoor Units, where ever required.

ODU Units Mounted on MS Frame/Masonry Pedestal with required

anti-vibration mounting.

1.2 Indoor VRV/VRF Units

Supply, Installation, testing & commissioning of metallic body

indoor (Hi-Wall, Cassette & Ducted) Units of following minimum

capacity suitable to operate at 230+/-10% volt, 50 HZ, 1 phase

power supply and having multispeed motor, blower, coil section

with DX coil, outer cabinet, drain pan, drain pump, drain water lift-

up mechanism, insulation, pipe connections, fittings & required

cable to connect indoor unit to MCB etc. complete in all respect

and as per specification.

Indoor Units powder coated MS Hanging arrangement/wall

Brackets with required anti-vibration mounting.

1.2.1 CEILING MOUNTED 4-WAY/1-WAY CASSETTE UNITS

Digitally signed by GOUTAM

Supply, installation, testing and commissioning of

following minimum capacity 1-Way/4-way flow VRV/VRF Cassette

Type Indoor ceiling mounted unit equipped with synthetic

washable media pre-filter, fan section with low noise

DSR fan/dynamically balanced blower, multispeed motor, coil section

VRV/V with DX Copper coil, electronic expansion valve, outer

RF - cabinet, drain pump, grill, necessary supports, vibration

2019 isolation, cord less remote control etc., suitable for

operation on single phase 230 V ± 10%, 50Hz AC supply,

complete, as required. The unit shall have automatic force shut

down provision in case of fire on receiving signal from BMS

System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature.

Indoor Units powder coated MS Hanging arrangement/wall

Brackets/Spring Isolators with required anti-vibration mounting.

1.2.1.1 4-Way Cassette Unit

1.2.1.2 1-Way Cassette Units

1.3 CEILING SUSPENDED TREATED FRESH AIR UNITS

Supplying, installing, testing and commissioning of Ceiling

Suspended Treated Fresh air Units each complete with coil, filter,

etc. Air conditioners with evaporating unit comprising of cooling

coil, blower with motor and 220 volt, 1 phase, 50 Hz, AC supply

all as per specifications. The rate will also include entire drain

pipes and nothing extra shall be payable.

a) NDSR-5 4.5 TR (600CFM) Nos. 0 85595

b) NDSR-6 5.5 TR (800CFM) Nos. 0 130105

c) NDSR-7 6.5 TR (950CFM) Nos. 0 174614

1.4 Refrigerant Joints and Headers

NDSR-8 Supply, Installation, Testing and Commissioning of copper Y-

Joints sets, distributer and headers, suitable for various sizes of

gas and liquid line of VRF System complete as required for the Nos. 10 4793

above system. 47 930

1.5 Corded/Cordless Remote Controller

Digitally signed by GOUTAM

NDSR-9 Supply, Installation, testing and commissioning of self diagnostic

type Corded/Cordless remote controllers for operation of indoor Nos. 10 5204

1.6 Central Remote Controller

Supply, Installation, testing & commissioning of Main intelligent

central controller with Scheduled Timer system Touch

screen/Gate Way Type suitable for groups of indoor units to

operate, monitor, on/off, cyclic operation setting, temperature

setting etc. The controller shall be able to control up to minimum

nos. of indoor units with zoning option as mentioned below. The

controller shall have wide screen user friendly colour LCD Touch

screen display and can be wired by a non-polar transmission

cable The CRC shall be provided with suitable size metallic box

with lock arrangement. The controller shall be integrated to BMS

system thru software for monitoring & controlling of all above

parameters including start/ stop of each indoor / outdoor unit. All

necessary interface cards / units should be supplied as a part of

the system to integrate to the BMS Software.

a) NDSR- Maximum 64 Nos of Indoor Units

b) NDSR- Maximum 128 Nos of Indoor Units

c) NDSR- Maximum 256 Nos of Indoor Units

2 AIR PURIFICATION SYSTEM

Digitally signed by GOUTAM

Supply, installation, testing and commissioning of duct mounted

Air Purification System with advance oxidation plasma cell (AOP)

comprising of UVC lamp 254 NM with nanoX coating metallic

compound of five metals targeted on Alumninum matrix cell duly

enclosed by a poly quartz casing tube, with the capability to

produce ionized Hydroxyl oxidizers with in-built plasmoX to

generate ion generator pins (+- ions 10^6) along with ultrasonic

radio frequency waves for pest repellancy. The UV-C lamp will be

a low-pressure mercury type and of such intensity as to provide

minimum performance as listed below. The UV-C lamp will

produce only Germicidal UV (by definition this means 99.99% UV-

C energy). The airpurifier will have built in LED indication system

stating the operation of the 3 technologies the UV lamp, ionizer

and pest repellant. The AOP cell shal be capable of removing

Particulate matter, Gasous Contamination as well as Microbial

Contamination. The power / control cabling between the Pentagon

units and the power source / controls shall be included in the cost

The wattage of the lamp shall not be less than 13 watts upto and

length not less than 212 MM upto 2000 CFM, 21 watts upto and

length not less than 436 MM upto 2000-6500 CFM, 36 watts upto

and length not less than 436 MM upto 6501-18000 CFM and a

minimum of 48 watts upto 28000 CFM or combination based on

the application area. The system shall be capable of reducing

microbial bacteria, virus and spores , VoC’, odors and particulates

matter. The equipment shall have to CE, ISO 13485, ROHS, TUV,

FICCI, GreenPro with 2014/35/EU Low Voltage Directive along

with FDA compliance certifications. The AOP cell shall a

microbiological testing report against Bacteriophage (MS-2 FDA)

surrogate SARS Cov-2 with a minimum efficiency of 99 percent

along with a Virology report from ICMR approved lab with an

minimum efficiency of 99 percent against SARS COV2 within 45

minutes. The technology shall be tested by ICMR/ IIT on human

Alveolar Basal Epithelial Cells stating that there is no change in

the structure and prove that it is absoluely safe for humans.

Digitally signed by GOUTAM

The air purfication AOP does not produces ozone, the test

certificate from an International Lab shall be produced. The

specific certifications shall be submitted along with the technical

submital. The failure to submit the certifications along with the

submital shall lead to rejection of the product. The AOP cells

should be selected by considering a load factor calculation for

each specific area where the equipment is to be installed. The

Cells Should be complete with Transformers, control cabling and

Plug Top & necessary power cable. Vendor to comply all Tender

Specifications.

a) NDSR- Cassette Type (1/4-Way)

b) NDSR- Ductable Unit(TFA)

a) The vendor may offer the outdoor units as per availability from

the manufacturer, however keeping the tonnage same as per

BOQ subject to approval by Consultant/Client.

b) The indoor units capacity can be also as per availability from the

manufacturer but keeping the minimum capacity as required in

BOQ subject to approval by Consultant/Client.

Total Of AC Equipment High Side

SUB-HEAD 'C'- VENTILATIONS EQUIPMENTS

3.0 INLINE FAN (Ceiling suspended)

Supply, installation, testing, commissioning of Single Skin Inline

fan with Backward Curved SISW Fan, vibration isolators, speed

regulator, GI gravity louvers, Bird Screen and required cable as

per specification and drawing. The Motor shall be suitable to run

on 1 phase/50 hz/ 220 v electrical power Supply including fire

retardant non-porous double layer flexible connection of the

following capacity.

Thickness of casing : Upto 1000 CFM - 2mm , above 1000 CFM -

The louvers & bird screen shall be made of 24G & 16G metallic

construction respectively.

a) NDSR- 19447

200 CFM (340 CMH) at 10 mm static pressure Nos. 1

4.0 PROPELLER FAN:

METALLIC TYPE PROPELLER FAN

Digitally signed by GOUTAM

Supply, installation, testing and commissioning of wall mounted

Propeller type heavy duty exhaust Fan of metallic construction

complete with speed regulator, bird screen, gravity louvers,

vibration isolators, required cable, plug & other accessories

compete as required, suitable for single phase, 240± 10 volts,

50Hz AC. supply of following capacities:

a) NDSR- 300 mm sweep dia (900 RPM) 4318

SUB-HEAD 'D' -REFRIGERANT/DRAIN PIPING & CONTROL WIRING

5.0 TRANSMISSION & CONTROL WIRING

Supplying, installing, testing and commissioning of Shielded

control cum transmission wiring of 2 core x 1.5 sqmm copper

FRLSH, XLPE insulated cable in suitable GI conduits accessories

between indoor and outdoor units. Necessary securing of conduit

shall be made by contractor. After completion of work wall and

floor shall be repaired and brought to its original finish. The rate

will also include cost of laying of GI conduit between indoor and

2C x 1.5 Sq mm (Shielded-Unarmoured) RM 105

6.0 REFRIGERANT PIPING

Supply, fixing, testing and commissioning of interconnecting

soft/hard drawn copper refrigerant pipe work of following outer

diameter duly insulated with fire rated class'O' closed cell

elastomeric nitrile rubber insulation (19mm/13mm thick) between

indoor & outdoor units. Exposed piping will be protected with 26

G aluminium sheet cladding as per specifications. All piping

should be laid on Galvanized/Powder Coated tray supported by

Galvanized M S Hangers & Clamps and all external piping shall

run in covered cable trays. The rate includes all the items

required to complete the piping work and nothing extra should be

payable except the cable tray.

Vaccumiazation & Nitrogen pressure testing for leakages &

flushing during installation & after commissioning between IDU &

Civil Work such as wall hole making , wall chiselling ,refilling of

chiselling part with mortar etc. as per site condition.

Covering of External refrigerant piping insulation shall be done

with 26 G aluminium sheet cladding as per specifications.

Internal Refrigerant piping insulation shall be covered with

Aluminium Foil as per specifications.

Digitally signed by GOUTAM

a) 5.1 6.4 mm outer dia Soft Drawn with Tube Thickness-1.2mm (

Insulation-19 mm ) 3 675

b) 5.2 9.5 mm outer dia Soft Drawn with Tube Thickness-1.2mm (

Insulation-19 mm ) 15 888

c) 5.3 12.7 mm outer dia Soft Drawn with Tube Thickness-1.2mm (

Insulation-19 mm ) 11 650

d) 5.4 15.9 mm outer dia Soft Drawn with Tube Thickness-1.2mm (

Insulation-19 mm ) 38 220

e) 5.5 19.1 mm outer dia Hard Drawn with Tube Thickness-1.2mm (

Insulation-19 mm ) 5 656

f) 5.6 22.2 mm outer dia Hard Drawn with Tube Thickness-1.2mm (

Insulation-19 mm ) 4 325

g) 5.7 25.4 mm outer dia Hard Drawn with Tube Thickness-1.2mm (

Insulation-19 mm ) 1 022

h) 5.8 28.6 mm outer dia Hard Drawn with Tube Thickness-1.2mm (

Insulation-19 mm ) 16 620

i) 5.9 31.8 mm outer dia Hard Drawn with Tube Thickness-1.62mm (

Insulation-19 mm ) 1 170

j) 5.10 34.9 mm outer dia Hard Drawn with Tube Thickness-1.62mm (

Insulation-19 mm ) 6 150

k) 5.11 38.1 mm outer dia Hard Drawn with Tube Thickness-1.62mm(

Insulation-19 mm ) 1 265

l) 5.12 41.3 mm outer dia Hard Drawn with Tube Thickness-1.62mm(

Insulation-19 mm ) 1 309

7.0 DRAIN PIPING

Providing and fixing of cPVC drain water piping complete with

fittings, flexible connection to IDU, necessary support as per

specification and insulated with 6 mm thick fire rated class'O'

closed cell elastomeric nitrile rubber insulation.

a) NDSR- 25 mm dia

b) NDSR- 32 mm dia

c) NDSR- 40 mm dia

d) NDSR- 50 mm dia

Digitally signed by GOUTAM

8.0 DUCTING FOR AIR CONDITIONING / VENTILATION

8A FACTORY FABRICATED GALVANIZED SHEET METAL DUCTS

Supply, installation, testing and commissioning of factory

fabricated Galvanized Steel (GSS) Sheet metal ducts complete

with flanges, neoprene rubber gasket, elbows, Splitter Damper,

vanes, hangers & support etc. as required as per

DSR IS/DW144/SAMACNA standard & confirming to specification. Duct

E&M- shall be furnish at site in "L" shape or box shape from factory.

2022 The rates shall include all materials of the duct and labour for

suspension and supporting arrangement for plenums, ducts,

complete with fire retardant flexible connection as required and

as per specifications.

Note : Splitter Shall be a part of ducting.

0.63 MM (24 Gauge ) SQM 10

0.80 MM (22 Gauge ) SQM 2

SITE FABRICATED GALVANIZED SHEET METAL DUCTS

Supply, Fabrication, installation and testing of Galvanized Steel

(GS) sheet metal ducts & finally applying fire rated paint as per

BS 476 Part 24 (Site FABRICATED DUCTS For Connection

/Plenum etc.) in accordance with the approved shop drawings

complete with all accessories like vanes, flanges, suspension rods

, anchor bolts, GI bolts & nuts, etc., as per specifications.

Site fabricated GSS sheet metal rectangular ducting as per IS 655-

Digitally signed by GOUTAM

9.0 AIR TERMINAL (SUPPLY/RETURN/EXHAUST)

Supply, installation, testing and commissioning of 50 micron

Powder coated Aluminium extruded Air Terminal (Diffuser/Grille)

as per specification & and drawings including fixing frames of GI

in False ceiling/wall.

Supply. Installation, testing and commissioning of powder coated

extruded aluminium section grills with aluminium dampers for

supply air terminal and grilles without damper for return air for

air-conditioning as per specification.

a) 16.15 Grilles with Dampers SQM 1 9105 9 105

b) 16.16 Grilles without Dampers SQM 0 5910

Supply. Installation, testing and commissioning of powder coated

extruded aluminium square diffusers with antismudge ring and

removable core.

a) 16.17 Supply & Exhaust air with dampers SQM 1 12184 12 184

b) 16.18 Return air without damper SQM 0 8121

10.0 Under/Over Deck Insulation of Exposed Roof

Providing and Fixing Underdeck Insulation with 50 mm thick with

closed cell Nitrile Rubber with prelaminated Aluminum foil on one

side having a low stable k value of 0.035 k.cal/hr.m at 10.C and

minimum density of 40-55 ± 3 kg/cum.The R-value should be as

11.0 ISOLATOR FOR OUTDOOR UNIT

Supply, Installation, Testing & Commissioning of following

Switchgears as an Isolator in IP-65 rated in power coated 16 SWG

sheet steel enclosure .

a) NDSR- 32A 4P MCCB(25 KA) Upto 10.0HP

b) NDSR- 40A 4P MCCB(25 KA) 10.1 to 14.0HP

c) NDSR- 63A 4P MCCB(25 KA) 14.1 HP To 22.0 HP

Digitally signed by GOUTAM

12.0 POWER CABLING

Supply, laying, testing and commissioning of power and control

cabling as per specification given in the tender.

Supply and laying ,testing and commissioning of following sizes of

Copper conductor control cables with PVC conduit & fixing clamps

and effecting proper connections to equipment etc. of following

NDSR- 4C x 16 Sq. mm Copper Conductor (Armoured) 14.1 HP To 22.0

NDSR- 4C x 10 Sq. mm Copper Conductor (Armoured) 10.1 to 14.0HP

NDSR- 4C x 6 Sq. mm Copper Conductor (Armoured) Upto 10.0HP & AHU

NDSR- 4C x 4 Sq. mm Copper Conductor (Armoured) For AHU, Axial Flow

29 Fan & Ductable Unit 354

13.0 GI COVERED CABLE TRAY

Supplying and installation for following size of perforated Hot

Dipped Galvanised Iron Covered cable tray for exposed

refrigerant pipe With Bends, Tee, Cross Member & Reducer

(Galvanisation thickness not less than 50 microns) with

perforation not more than 17.5%, in convenient sections, joined

with connectors, suspended from the ceiling with G.I. suspenders

including G.I. bolts & nuts, etc. as required.

a) NDSR- 150 mm wide x 50 mm depth x 1.6 mm thickness.

TOTAL FOR HVAC WORKS ₹ 7,99,669.00 #########

GRAND TOTAL OF DIRECTOR OFFICE RENOVATION WORK 6000925 9964083

GRAND TOTAL OF DIRECTOR OFFICE RENOVATION WORK 6000925 9964083

1 SUB HEAD-II :- ATT AND CONCRETE WORKS

Supplying chemical emulsion in sealed containers including

2.34 delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Litre 15 234.75 3 521

Diluting and injecting chemical emulsion for POST-

anti-termite treatment (excluding the cost of chemical emulsion)

:-Treatment at points of contact of wood work by chemical metre 180 279.7

emulsion Chlorpyriphos/ Lindane (in oil or kerosene based

solution) @ 0.5 litres per hole by drilling 6 mm dia holes at

downward angle of 45 degree at 150 mm centre to centre and

2.35.5 sealing the same. 50 346

Digitally signed by GOUTAM

Providing and laying in position cement concrete of specified

grade excluding the cost of centering and shuttering - All work up

1.1 4.1 to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural

4.1.3 sources : 4 graded stone aggregate 20 mm nominal size derived cum 20 7878.5

a) from natural sources) 1 57 570

ATT AND CONCRETE WORKS SUB HEAD TOTAL 2 11 437

2 SUB HEAD-IV :- MASONRY WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of

2.1 6.1 class designation 7.5 in foundation and plinth in:

a) 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 10 7132.25 71 323

Brick work with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in superstructure bove plinth level up to

2.2 6.4 floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 10 9105.95 91 060

MASONRY WORK SUB HEAD TOTAL 162382

3 SUB HEAD-V:- WOOD WORK

Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of required dia & length

3.1 9.1 ( hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood cum 0.27 142949.7 38 596

Providing 40x5 mm flat iron hold fast 40 cm long including fixing

to frame with 10 mm diameter bolts, nuts and wooden plugs and

embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 each 8 228.85

cement : 3 coarse sand : 6 graded stone aggregate 20mm

3.2 9.53 nominal size) 1 831

Providing and fixing wooden moulded beading to door and

window frames with iron screws, plugs and priming coat on

3.3 9.4 unexposed surface etc. complete :

9.40.1 2nd class teak wood

Digitally signed by GOUTAM

Polishing in high gloss/matt finish melamine clear polish on wood

work in required olor/wooden shade texture with following sqm 16.06 3049.85

3.4 13.116 process in the sequence as detailed below: 48 981

1. The surface to be polished is rubbed with sand paper 80/120

no. and then with sand paper of 160/180 nos.

2. Applying two coats of sealer with spray gun and allowing

sufficient drying time for 1st coat and 2nd coat is allowed to dry

for 8 to 12hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer

grading with ample water to remove excess sealer layer and

make the surface further smooth after this wet rubbing, then

surface is applied with special grade melamine fillers to fill all the

small and big holes/grooves etc. Filler coat to be allowed to dry

for 4 to 6 hrs on which again a light wet rubbing is done this

surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun

using melamine clear polish and melamine thinner in required

proportion. This 1st coat is allowed to dry for 24 hrs then this dry

surface is again fine wet rubbed smooth, which is further allowed

to dry for 12 hrs. The final melamine polish is applied with

compressor pressure spray gun using melamine clear polish and

melamine thinner mixed in required proportion complete as per

direction of Engineer-in-Charge. (Final coat to be done in 1 or 2

layers without gap of time.)

Providing and fixing ISI marked flush door shutters conforming to

IS : 2202 (Part I) non-decorative type, core of block board

construction with frame of 1st class hard wood and well matched

commercial 3 ply veneering with vertical grains or cross bands

3.5 9.21 and face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with

9.21.1 necessary screws 6 891

Extra for providing lipping with 2nd class teak wood battens 25

mm minimum depth on all edges of flush door shutters (over all sqm 2.88 462.35

3.6 9.23 area of door shutter to be measured). 1 332

Providing & Fixing decorative high pressure laminated sheet of

plain / wood grain in gloss / matt/ suede finish with high density

protective surface layer and reverse side of adhesive bonding

quality conforming to IS : 2046 Type S, including cost of adhesive

3.7 9.127 of approved quality.

Digitally signed by GOUTAM

Providing and fixing 12 mm thick frameless toughened glass door

shutter of approved brand and manufacture, including providing

and fixing top & bottom pivot & double acting hydraulic floor

spring type fixing arrangement and making necessary holes etc. sqm 10.8 5325.9

for fixing required door fittings, all complete as per direction of

Engineer-in-charge (Door handle, lock and stopper etc.to be paid

3.8 21.18 separately). 57 520

Providing and fixing double action hydraulic floor spring of

approved brand and manufacture conforming to IS : 6315, having

brand logo embossed on the body / plate with double spring

mechanism and door weight upto 125 kg, for doors, including

cost of cutting floors, embedding in floors as required and making

good the same matching to the existing floor finishing and cover

plates with brass pivot and single piece M.S. sheet outer box with

slide plate etc. complete as per the direction of Engineer-in-

3.9 21.4 charge.

21.4.1 With stainless steel cover plate minimum 1.25 mm thickness each 2 2823.85 5 648

HARDWARES FITTINGS FOR DOOR

Providing and fixing approved brand and manufacturer SS 304

grade hardware's for Doors etc.

Providing and fixing approved brand and manufacture SS 304

grade D type 1200mm Pull Handle with 32mm dia fixed with SS

per pair 2 9000

screws etc. complete in all respects as per manufacturers'

3.1 NSR specifications & as directed by Engineer-in-charge. 18 000

Providing and fixing approved brand and manufacture SS 304

grade Glass door Lock, top and bottom patch fitting with SS

screws etc. complete in all respects as per manufacturers'

3.11 NSR specifications & as directed by Engineer-in-charge. 33 000

Providing and fixing approved brand and manufacture SS 304

Lever Handle D-type fixed with SS screws etc. complete in all

respects as per manufacturers' specifications & as directed by

3.12 NSR Engineer-in-charge. 4 000

Providing and fixing approved brand and manufacture SS 304

grade SS 304 grade Mortice lock with key cylinder fixed fixed with

SS screws etc. complete in all respects as per manufacturers'

3.13 NSR specifications & as directed by Engineer-in-charge. 3 500

Digitally signed by GOUTAM

Providing and fixing approved brand and manufacture SS 304

grade Tower bolt 250mm long with 10mm dia fixed with SS

screws etc. complete in all respects as per manufacturers'

3.14 NSR specifications & as directed by Engineer-in-charge. 900

Providing and fixing approved brand and manufacture SS 304

grade Tower bolt 150mm long with 10mm dia fixed with SS

screws etc. complete in all respects as per manufacturers'

3.15 NSR specifications & as directed by Engineer-in-charge. 750

Providing and fixing approved brand and manufacture SS 304

grade wall mounted door buffer fixed with SS screws etc.

complete in all respects as per manufacturers' specifications & as

3.16 NSR directed by Engineer-in-charge. 750

Providing and fixing approved brand and manufacture SS 304

grade Door Stopper - door mounted hanging type fixed with SS

screws etc. complete in all respects as per manufacturers'

3.17 NSR specifications & as directed by Engineer-in-charge. 700

Providing and fixing aluminium die cast body tubular type

universal hydraulic door closer (having brand logo with ISI, IS :

3564, embossed on the body, door weight upto 35 kg and door each 1 1124.85

width upto 700 mm), with necessary accessories and screws etc.

WOOD WORK TOTAL 170330.39 62724.85

4 SUB HEAD-VI :- STEEL WORK

Providing and fixing T-iron frames for doors, windows and

ventilators of mild steel Tee-sections, joints mitred and welded,

including fixing of necessary butt hinges and screws and applying

a priming coat of approved steel primer. kg 100 136

Fixing with 15x3 mm lugs 10 cm long embedded in cement

concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse

4.1 10.13.1 sand : 6 graded stone aggregate 20 mm nominal size). 13 600

Steel work in built up tubular (round, square or rectangular

hollow tubes etc.) trusses etc., including cutting, hoisting, fixing

in position and applying a priming coat of approved steel primer,

including welding and bolted with special shaped washers etc.

4.2 10.16 complete.

10.16.1 Hot finished welded type tubes kg 890 194.4 1 73 016

Digitally signed by GOUTAM

STEEL WORK TOTAL 1 86 616

5 SUB HEAD- VII :- FLOORING AND PANELLING

11.3.1 Surface preparation -Cement concrete flooring 1:2:4 (1 cement : Sqm 250 842.5 210625

2 coarse sand : 4 graded stone aggregate) finished with a floating

5.1 coat of neat cement, including cement slurry, but excluding the

cost of nosing of steps etc. complete 40 mm thick with 20 mm

nominal size stone aggregate

Providing and fixing in position Phenol bonded Bamboo wood

flooring with Plank of sizes 14mm thick, minimum 1800mm

length and minimum 100mm wide, in approved colour, texture

and finish having peroforance Appraisal certificate (PAC) issued

by building materials and technology promotion council (B<TPC).

The flooring Shall be fixed with tounge and groove interlocking

system, with underlayment of 4mm thick expandedpolyethylene

foam sheet having density 40kg/cim, over prepared surface with

necesary quarter round planks of suze 1900mm x 18mm and door

reducer of size 1900mm x 44mm, where ever required. The

Banmoo planks shall have density of 1000Kg/cim and minimum

hardness of 1000 Kgf. with eco freindly UV coating, all complete

26.1 as per direction of the Engineer-in-charge. 14 93 134

Providing and fixing in position Phenol bonded Bamboo wood in

wall skirting with Plank of sizes 14mm thick, minimum 1900mm

length and minimum 85mm wide, in approved colour, texture

and finish having peroforance Appraisal certificate (PAC) issued

by building materials and technology promotion council (B<TPC).

The Skirting shall be fixed with SS screwa and rawl plugs with sqm 24.295 6033.55

underlayment of 4mm thick expandedpolyethylene foam sheet

having density 40kg/cim, over prepared surface. The Banmoo

planks shall have density of 1000Kg/cim and minimum hardness

of 1000 Kgf. with eco freindly UV coating, all complete as per

5.3 26.2 direction of the Engineer-in-charge. 1 46 585

Digitally signed by GOUTAM

Providing and fixing in position Phenol bonded Bamboo wood wall

cladding at all height with Plank of sizes 10mm thick, minimum

1800mm length and minimum 100mm wide, in approved colour,

texture and finish having peroforance Appraisal certificate (PAC)

issued by building materials and technology promotion council

(BMTPC). with necessary profiles edges fixed with 40mm SS

screws 5 nos in each tile to framework made of seconf class teak

wood of size 20x15mm in center of each tile. The Cladding shall

be layed with backlayment of 4mm thick expandedpolyethylene

foam sheet having density 40kg/cim in two layers, first layer on

wall surface before fixing wooden frame and second layer on

frame under cladding. The Banmoo planks shall have density of

1000Kg/cim and minimum hardness of 1000 Kgf. with eco

freindly UV coating, all complete as per direction of the Engineer-

Providing and Fixing of Akous wood grooved panel having system

NRC up to 0.88 with lineal perforation. The high grade

MDF/HDDMR panels shall be melamine laminate of size 2440mm

x128mm x 18mm with 2mm groove at 14mm pitch, Tongue and

Groove edges for seamless mounting having density of

800kg/m3(base panel confirming to IS 12406 and laminated

panel confirming to IS 14587). The back of the panels are sqm 300 7000

perforated with a nonwoven fabric covering of 0.2mm for

providing Sound absorption via the acoustic impedance method.

Panel is fixed by using GI Framework 2400mmx50mmx0.50mm

spaced at 600mmx600 c/c & 12 mm WPC framework spaced at

400mm centers with suitable brackets and the system is backline

with 50 mm Rockwool insulation@48kg density and along with all

5.5 NSR accessories example: chicken mesh and all. 21 00 000

Digitally signed by GOUTAM

Providing and fixing of 6mm thick lacquer glass SGG Planilaque

glass of approved color by architect/ Client with SGG Planifix

silicon on perfectly leveled water proof non-conventional plywood

(preferably marine plywood) of minimum 12mm thickness

mounted on the RCC wall/any other structure. The SGG

Planilaque lacquered glass to be of 6mm thick highly durable,

humid resistance, poly urethane lacquer glass. The Planilaque

glass should be manufactured by industrial curtain coating

process. It should meet quality standards as per BS EN 1036 sqm 45 12000

1999 & confirms to PERSOZ hardness test of at least 220

oscillations. The substrate of the glass should conform to

Standard BS EN 572 1995 parts 1 and 2: Glass in Building – Basic

soda lime silicate glass products. Planilaque lacquered glass to be

manufactured to right specifications, relating to consistency of

color, opacity and homogeneity throughout production campaigns

and also to the ageing properties, mechanical resistance, and

resistance to humidity and to chemical agents of the lacquer. The

color of the lacquer should remain stable when exposed to normal

5.6 NSR levels of ultra-violet light in interior applications. 5 40 000

Providing and Fixing Custom Print Roller Blinds- Top Tube

extruded by none rusting Aluminium alloy with 1.25 mm

thickness in 32, 38 & 45 mm diameters respectively.Control unit

mechanism made by high strength ABS plastic,The Universal

Brackets are made by mild steel with powder coating to give sqm 57.6 3200

greater finish. Blackout Fabric made of PES100% with acrylic

coating resistant to Cracking & Fraying.Ball chain made by

unbreakable Polyethylene plastic, 1.50 mm Nylon cord with 4.50

mm balls, Fabric covered Rectangle Bottom Channel. Min. printing

5.7 NSR area 300mm x300mm , Max. Printing area 2500mmx3500mm 1 84 320

FLOORING WORK TOTAL 29 15 027 2824320

6 SUB HEAD-VIII :- PAINTING AND FINISHING WORK

6.1 13.4 12mm cement plaster of mix :

13.4.2 1:6 (1 cement: 6 coarse sand) sqm 100 343.65 34 365

15 mm cement plaster on the rough side of single or half brick

6.2 13.5 wall of mix :

13.5.2 1:6 (1 cement: 6 coarse sand) sqm 100 395.35 39 535

Digitally signed by GOUTAM

18 mm cement plaster in two coats under layer 12 mm thick

cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top sqm 100 518.55

6.3 13.11 layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). 51 855

Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over the

plastered wall surface to prepare the surface even and smooth

Painting with synthetic enamel paint of approved brand and

6.5 13.62 manufacture of required color to give an shade.

Two or more coats on new work including priming coat of ordinary

13.62.1 paint approved brand. 31 991

Finishing with plastic emulsion paint of approved brand and

manufacture of required color to give an shade.Two or more coats

applied on walls @ 1.25 ltr/10 sqm over and including one coat of

6.6 NSR Special primer applied @0.75 ltr /10 sqm 66 000

PAINTING AND FINISHING WORK TOTAL 2 04 561 66 000

7 SUB HEAD-X :- ROOFING & FALSE CEILING WORK

Providing & Fixing of Fiber Acoustical Suspended Ceiling System

Glass Fiber Micro look/Square EDGE TILES WITH 15mm black

silhouette Exposed Groove Grid. The tiles should have Humidity

Resistance (RH) of 95%, NRC 0.90, Colour Black & white, Light

Reflectance >84% with Fire Resistance in module size of

595x595x 15 mm. The grid should be of 15mm grid sections i.e.

the Main Runner 3000mm in 38 mm web height, 1200 mm & 600

mm Cross Tees in web height of 26mm with thickness

0.3mm.Installtion to be comprise main runner spaced at 1200mm

centre securely fixed to the structural soffit using suspension

system at 1200mm maximum centre. The First/Last suspension

system at the end of each main runner should not be greater than

450mm from the adjacent wall. Flush fitting 1200mm long cross

tees to be interlocked between main runners at 600mm centre to

form 1200 x 600 mm module. Cut cross tees longer than 600mm

require independent support. 600 x 600mm module to be formed

by fitting 600mm long flush fitting cross tees centrally between

the 1200 mm cross tees. Perimeter trim to be wall angles of size

3000x19x19mm, secured to walls at 450 mm maximum centres

and as per the drawing and the work complete in all respects to

the satisfaction of Engineer in-charge. accessories consisting of

HLC Sleeve Anchor Fasteners of thread size 6.5mm x 25/5 with 13 19 175

Soffit Cleat made of Galvanized steel of size 27 x 37 x 25 x

Digitally signed by GOUTAM

Providing & fixing false ceiling at all height including providing &

fixing of framework made of special section, power pressed from

M.S. sheets and galvanised with zinc coating of 120 gms/ sqm

(both side inclusive) as per IS : 277 and consisting of angle cleat

of size 25mm wide x 1.6mm thick with flanges of 27mm and

37mm, at 1200mm c/c, one flange fixed to the ceiling with dash

fastener 12.5mm dia x 50mm long with 6mm dia bolts, other

flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of

required length with nuts & bolts of required size and other end of

angle hanger fixed with intermediate G.I chanels 45 x15 x

0.90mm running at the spacing of 1200 mm c/c, to which the

ceiling section 0.5mm thick bottom wedge of 80mm with tapered

flanges of 26 mm each having lips of 10.5mm, at 450mm c/c,

shall be fixed in a direction perpendicular to G.I intermediate

channel with connecting clip made out of 2.64mm dia x 230mm

long G.I wire at every junction, including fixing perimeter

channels 0.50mm thick 27mm high having flanges of 20mm and

30mm long, the perimeter of ceiling fixed to wall/ partitions with

the help of Rawl plugs at 450mm centre, with 25mm long dry wall

screws @ 230mm interval, including fixing of Calcium Silicate

Board to ceiling section and perimeter channels with the help of

dry wall screws of size 3.5 x25mm at 230mm c/c, including

mm thick CalciumtoSilicate

of tapered and square &edges

with Calcareous

Siliceous materials reinforced with cellulose fiber manufactured cum 50.7375 1572.3

12.59.1 through autoclaving process. 79 775

ROOFING & FALSE CEILING WORK SUB HEAD TOTAL 79774.57 13 19 175

8 SUB HEAD-VII :- FURNITURE WORK

Digitally signed by GOUTAM

Providing, supplying and placing of Desk cum Bench N Seater It is

an ingenious product which provides an elegant,modular solution

to the needs of modern day classroom. It offers flexibility in

layout and efficiancy in space management Without

compromising on seating comfort.A)Legs: Legs are made of MS

ERW tube section (IS:7138) of size 75x25x2 mm thick oval tube

with 5 mm thk HR brackets as per IS:2062 and 2mm thk CRCA

brackets as per IS-513welded on to the tubes. Assembly is

powder coated with epoxy polyester.Leg height varies from 705

to 1005 in pitch of 50 as per layout.Sturdy anchoring by anchor

bolts on to base of 8mm thk plate for proper resting of

Leg**.Shoe made of ultramid -Nylon are provided at the bottom

for covering the base plate.

B)Side clads: Two side clads made of e18 mm thk plate with

0.8mm thk pvc lipping and on the outside covered with welded

metal structure made of 2 mm thk CRCA as per 1S-513 powder

coated with Epoxy polyester .

C)Worktop: Worktop are made of 25 mm thick Pre-Laminated

Board of El-P2 Grade and approved shade conforming to

IS:12823:1990. All the edge of work surface are provided with

machine pressed 2mm thick pvc edge band glued with hot melt

D)Seat: Seat has self closing mechanism which will operate by

Supplying and placing in position of Meeting table .Supplying and

placing in position conference table of the following specifications

with overall size shall be 3600 X 1500 X 740.Work top--Made of

25mm thick MDF-one side pre-laminate board conforming to

IS-14587:1998 with 0.4mm PVC membrane pressed on to top

and having chamfered edge. Access panels provided with soft

closing hinges.The product should be certified by GreenGuard

Gold, Green pro, Indian Design Mark, AIOTA, FSC & PEFC

certified, Member of BIFMA

Understructure-The Under-structure consists of mixture of 25mm

and 18mm Pre-laminated twin board of E1-P2 grade and

approved shade conforming to IS-12823:1990, Edge banded with No 2 45000

matching 2 mm thick PVC lipping. Anodised aluminium alloy

63400 - WP profile is added at bottom edges for improving the

aesthetics. The product has a knock-down construction.

Wire Management-Bottom cabinet with door is provided for flow

of wires and cables. Cutout provision below Access flap at four

locations for standard 8 module Anchor Roma is provided. Beside

each cutout, an additional cutout with plate is provided for

mounting Audio Visual Cables (eg. HDMI,VGA-A,etc).

The product should be certified by GreenGuard, IAQ Gold,

8.2 NSR GreenPro & GRIHA 90 000

Digitally signed by GOUTAM

Supplying and placing in position of Podium table . Supplying and

placing in position conference table of the following specifications

with overall size shall be 3600 X 1500 X 740.Work top--Made of

25mm thick MDF-one side pre-laminate board conforming to

IS-14587:1998 with 0.4mm PVC membrane pressed on to top

and having chamfered edge. Access panels provided with soft

closing hinges.The product should be certified by GreenGuard

Gold, Green pro, Indian Design Mark, AIOTA, FSC & PEFC

certified, Member of BIFMA

Understructure-The Under-structure consists of mixture of 25mm

and 18mm Pre-laminated twin board of E1-P2 grade and

approved shade conforming to IS-12823:1990, Edge banded with

matching 2 mm thick PVC lipping. Anodised aluminium alloy

63400 - WP profile is added at bottom edges for improving the

aesthetics. The product has a knock-down construction.

Wire Management-Bottom cabinet with door is provided for flow

of wires and cables. Cutout provision below Access flap at four

locations for standard 8 module Anchor Roma is provided. Beside

each cutout, an additional cutout with plate is provided for

mounting Audio Visual Cables (eg. HDMI,VGA-A,etc).

The product should be certified by GreenGuard, IAQ Gold,

8.3 NSR GreenPro & GRIHA 50 000

Supplying, and placing in position of 360 degree revloving high

back chair as per Image.Providing, supplying and placing of High

Back Chair. SEAT ASSEMBLY: The seat is made up of 1.5±0.1 cm

thick hot-pressed plywood upholstered with fabric and moulded

polyurethane foam.

SEAT SIZE: 51.8cm (W) x 49.7cm (D)

BACK ASSEMBLY: The Back is injection moulded in glass filled

Polypropylene which is 2 upholstered with Mesh fabric. The back

consist of adjustable Lumbar support made of injection moulded

Polypropylene having an adjustment of 5.0 10.1 cm.

BACK SIZE: 47.9 cm(W) x 66.9 cm (H)

HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR

polyurethane seat foam is moulded with density 45+/-2 kg/m and

hardness 14 ± 2 kgf as per IS:7888 for 25% compression.

ARMRESTS (ADJUSTABLE):The height adjustable armrest is made

of Polypropylene and can be adjusted to 6.010.1cm height it also

has swivel and To and Fro adjustment with moulded PU armtop

ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting

mechanism is designed with the following features

360° revolving type

Front-pivot for tilt with feet resting on ground & continuous

8.4 NSR lumber support ensuring more comfort 22 23 000

Till tension adjustment can be operated in seating position

Digitally signed by GOUTAM

Supplying, and placing in position of 360 degree revloving

medium back chair as per Image. Providing, supplying and

placing of High Back Chair.SEAT ASSEMBLY: The seat is made up

of 12mm thick MR Grade plywood, layered with pocket spring

coms, super soft foam of 32 kg/m3 density and edging foam of

28 kg/m3 dormity. A 200GSM soft touch fibre fill sheet is placed

over foam sub-assembly and upholstered in natural leather or

BACK ASSEMBLY: The back assembly is made up of a combination

of pinewood members, 12mm thick MR Grade

plywood and 2mm thick cardboard, layered with slab stock foam

of 28 kg/m3 density. A 200GSM soft touch fibre fill sheet is

placed over foam sub-assembly and upholstered in natural

leather or leatherette

ARMPAD ASSEMBLY: The amped assembly is made up of 6mm

thick MR Grade plywood fixed with MS powder-coated

brackets, Inyered with foam of 60 kg/m3 density, A 200GSM soft

touch fibre fill sheet is placed over foam sub-assembly and

upholstered in leatherette.

CENTER TILT WITH MULTI POSITION LOCK MECHANISM: The

mechanism is designed with the following features:

8.5 NSR 360 revolving type 4 48 000

3 position locking

Supplying, and placing in position of 360 degree revloving high

back chair Providing, supplying and placing of High Back

Chair.SEAT ASSEMBLY: The seat is made up of 12mm thick MR

Grade plywood, layered with pocket spring coms, super soft foam

of 32 kg/m3 density and edging foam of 28 kg/m3 dormity. A

200GSM soft touch fibre fill sheet is placed over foam sub-

assembly and upholstered in natural leather or leatherette.

BACK ASSEMBLY: The back assembly is made up of a combination

of pinewood members, 12mm thick MR Grade plywood and 2mm

thick cardboard, layered with slab stock foam of 28 kg/m3

density. A 200GSM soft touch fibre fill sheet is placed over foam

sub-assembly and upholstered in natural leather or leatherette

ARMPAD ASSEMBLY: The amped assembly is made up of 6mm

thick MR Grade plywood fixed with MS powder-coated brackets,

Inyered with foam of 60 kg/m3 density, A 200GSM soft touch

fibre fill sheet is placed over foam sub-assembly and upholstered

in leatherette.

CENTER TILT WITH MULTI POSITION LOCK MECHANISM: The

mechanism is designed with the following features:

360 revolving type

3 position locking

8.6 NSR Till tension adjustment 32 000

PNEUMATIC HEIGHT ADJUSTMENT: The Class 4 pneumatic height

FURNITURE WORK SUB HEAD TOTAL 58 13 000

1 INTERNAL ELECTRICAL WORK

Digitally signed by GOUTAM

Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

cable in surface / recessed medium class PVC conduit, with

modular switch, modular plate, suitable GI box and earthing the

point with 1.5 sq.mm FRLS PVC insulated copper conductor single

1 1.1 core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust

fan point/ call bell point ( without independent switch etc.) with

1.5 sq. mm FRLS PVC insulated copper conductor single core

cable in surface/ recessed PVC conduit, and earthing the point

with 1.5 sq. mm FRLS PVC insulated copper conductor single core

2 1.55 cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed medium

Meter 200 334

class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated

3 1.12 copper conductor single core cable for loop earthing as required. 66 800

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed medium

Metre 100 537

class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated

4 1.13 copper conductor single core cable for loop earthing as required. 53 700

Wiring for circuit/ submain wiring alongwith earth wire with the

following sizes of FRLS PVC insulated copper conductor, single

core cable in surface/ recessed medium class PVC conduit as

5 1.14 required.

CIRCUIT / SUBMAIN WIRING

5.1 1.14.1 2x1.5 sq mm + 1x1.5 sq mm earth wire Meter 140 233 32 620

5.2 1.14.2 2x2.5 sq mm + 1x2.5 sq mm earth wire Meter 120 275 33 000

5.3 1.14.5 2x10 sq. mm + 1x6 sq. mm earth wire Meter 10 570 5 700

5.4 1.14.11 4x16 sq mm + 2x6 sq mm earth wire Meter 30 1365 40 950

Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and

fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps

6 1.31 modular switch, connection etc. as required. 11 925

Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and

fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16

7 1.32 amps modular switch, connection etc. as required. 5 860

Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providng and

fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A Each 1 676

modular switch, connections etc. as required. (For light plugs to

8 1.56 be used in non residential buildings). (For UPS Supply) 676

Digitally signed by GOUTAM

Supplying and fixing following modular switch/ socket on the

existing modular plate & switch box including connections but

9 1.24 excluding modular plate etc. as required.

9.1 1.24.7 TV anteena Socket Outlet Each 1 148 148

Supplying and fixing following size/ modules, GI box alongwith

modular base & cover plate for modular switches in recess etc as

10 1.27 required.

10.1 1.27.1 1 or 2 Module (75mmX75mm) - For Telephone,TV outlet & Data Each 5 298 1 490

10.2 1.27.2 3 Module (100mmX75mm) - For Socket outlet. Each 3 327 981

10.3 1.27.3 6 Module (200mmX75mm) - For Socket outlet. Each 2 343 686

Supplying and fixing following way, single pole and neutral, sheet

steel, MCB distribution board, 240 V, on surface/ recess,

complete with tinned copper bus bar, neutral bus bar, earthbar,

din bar, interconnections, powder painted including earthing etc.

11 2.3 as required. (But without MCB/RCCB/Isolator)

11.1 2.3.3 12 Way, Double Door Each 1 2315 2 315

Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 volts, on

surface/recess, complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without

12 2.4 MCB/RCCB/Isolator).

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C

series Miniature Circuit Breaker suitable for inductive loads of

following poles in the existing MCB DB complete with connections,

13 2.1 testing and commissioning etc,as required.

13.1 2.10.1 Single pole Each 26 256 6 656

Supplying and fixing following rating, double pole, 240 volts, MCB

NON complete with connections, testing and commissioning etc. as

15 DSR required.

Supplying and fixing following rating, four pole, 415 volts, MCB

NON complete with connections, testing and commissioning etc. as

16 DSR required.

Digitally signed by GOUTAM

Supplying and fixing of following rating double pole (Single phase

and neutral) 240 volts, residual current circuit breaker (RCCB),

having a current sensivity current 30 miliampere in the existing

MCB DB complete with connections, testing & commissioning etc.

17 2.14 as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm

solid copper conductor PE insulated, shielded with fine tinned

copper braid and protected with PVC sheath in the existing

18 1.19 surface/ recessed steel/ PVC conduit as required. 470

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including cutting

the wall and making good the same in case of recessed conduit as

19 1.21 required.

Supplying and fixing Cable End Box (Loose wire box) (IP 43)

suitable for following single pole and neutral, sheet steel, MCB

distribution board, 240 V, on surface/ recess, complete with

20 2.23 testing and commissioning etc. as required.

20.1 2.23.4 For 14 way, Double door SPN MCBDB Set 1 902 902

Supplying and fixing Cable End Box (Loose wire box) (IP 43)

suitable for following triple pole and neutral, sheet steel, MCB

distribution board, 415V, on surface/ recess, complete with

21 2.24 testing and commissioning etc. as required.

21.1 2.24.3 For 8way, Double door TPN MCBDB Set 1 1340 1 340

Installation, testing and commissioning of pre-wired, fluorescent

fitting / compact fluorescent fitting/ LED fittings of all types,

complete with all accessories and tube/lamp/ LED etc. directly on

ceiling/ wall/ false ceiling with GI Chain included for fixing Each 47 206

wherever required, including connections with 1.5 sq. mm FRLS

PVC insulated, copper conductor, single core cable and earthing

22 1.41 etc. as required. 9 682

Supply of following sizes of ISI marked aluminium conductor

XLPE insulated cable as per IS 7098, armoured, served, sheathed

NON 1100 volts grade. (Cable shall be purchased only after approval of

23 DSR cable schedule by architect / consultant).

23.1 DSR 4 core, 16 sq.mm 11 280

23.2 DSR 4 core, 10 sq.mm 10 560

Digitally signed by GOUTAM

Laying and fixing of one number PVC insulated and PVC sheathed

/ XLPE power cable of 1.1 KV grade of following size on cable tray

24 7.8 as required.

24.1 7.8.1 Upto 35 sq. mm (clamped with cable tie) Meter 80 45 3 600

Supplying and making end termination with brass compression

gland and aluminium lugs for following size of PVC insulated and

PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade

25 9.1 as required.

Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray (Galvanisation thickness not less than

50 microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

26 4.6 G.I. suspenders including G.I. bolts & nuts, etc. as required.

26.1 4.6.1 100 mm wide x 50 mm depth x 1.6 mm thickness. Meter 15 669 10 035

Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray "bends" (galvanisation not less than 50

microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

27 4.7 G.I. suspenders including G.I. bolts & nuts, etc. as required.

27.1 4.7.1 100 mm wide x 50 mm depth x 1.6 mm thickness. Each 2 1159 2 318

Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray "Tee" (galvanisation not less than 50

microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

28 4.8 G.I. suspenders including G.I. bolts & nuts, etc. as required.

28.1 4.8.1 100 mm wide x 50 mm depth x 1.6 mm thickness. Each 2 1327 2 654

Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray "Cross member"(galvanisation not less

than 50 microns) with perforation not more than 17.5%, in

convenient sections, joined with connectors, suspended from the

ceiling with G.I. suspenders including G.I. bolts & nuts, etc as

29 4.9 required.

29.1 4.9.1 100 mm wide x 50 mm depth x 1.6 mm thickness. Each 1 1327 1 327

Supplying and installing following size of perforated Hot Dipped

Galvanised Iron cable tray “Reducer” (galvanisation not less than

50 microns) with perforation not more than 17.5%, in convenient

sections, joined with connectors, suspended from the ceiling with

30 4.1 G.I. suspenders including G.I. bolts & nuts, etc. as required.

30.1 4.10.1 100 mm wide x 50 mm depth x 1.6 mm thickness. Each 1 1655 1 655

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in

31 5.15 recess for connections etc. as required. 7 320

Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the

32 1.53 existing surface/ recessed Steel/ PVC conduit as required.

Digitally signed by GOUTAM

TOTAL FOR S.H.-I 500952 25661

II LIGHT FIXTURE

Supply of Recess LED Downlighter made of pressure die cast alu.

housing, LED Used shall be SMD type and fixture should have

minimum efficacy >=100lumens/watt with Minimum system

Lumens 2000 with maximum system wattage of 20W Life of

fixture (Including Driver) : 50000 burning Hrs. @ L70B50 Lumen

maintenance, CCT of 6500K, CRI >80, PF >0.95, Minimum

Internal Surge Protection 2.5KV & , The fixture should comply Nos. 42 2335

with the parameters as per IS10322. The LED driver should

comply to IS 15885 sec 13 for Harmonics, IS 10322 for Electrical

Safety. LM 79 and LM80 reports need to be submitted from a

NABL/UL accredited lab to verify above parameters. Similar to

NON venus or Equivalenlt in Philips/Orient/Regent

Supply, Installation, Testing and Commissioning of 1200 mm

sweep, BEE 5 star rated, ceiling fan with Brush Less Direct

Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm

long down rod, 2 nos. canopies, shackle kit, safety rope, copper

winding, Power Factor not less than 0.9, Service Value (CM/M/W)

minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM

(tolerance as per IS : 374-2019), THD less than 10%, remote or

electronic regulator unit for speed control and all remaining Nos. 18 2076

accessories including safety pin, nut bolts, washers, temperature

rise=75 degree C (max.), insulation resistance washers,

temperature rise=75 degree C (max.), insulation resistance more

than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC

Supply, earthing etc. complete as required. Make - Atomberg /

Bajaj / Havells / Crompton

TOTAL FOR S.H.-II 37368 98 070

S. H. - DATA, TELEPHONE SYSTEM INCLUDING ACTIVE

III COMPONENTS

NON Supply, Installation, Testing & Commissioning of Patch Panel Cat

1 DSR 6 U/FTP 24 Port- Loaded as per technical specification. 16 195

NON Supply, Installation, Testing & Commissioning of Patch Cord Cat 6

2 DSR U/FTP 3 feet as per technical specification. 1 788

NON Supply, Installation, Testing & Commissioning of Patch Cord Cat 6

3 DSR U/FTP 7 feet as per technical specification. 16 080

Supply, Installation, Testing, Commissioning of Cat 6, 10G,

NON U/FTP, Information Outlet including G.I. Box and modular cover Nos. 6 5694

4 DSR plate as per technical specification. 34 164

Digitally signed by GOUTAM

Supply , Installtion , Testing and comissioning of 12U wall

NON mount rack with fans , 2 cable managers, satationary shelf , 2 Nos 1 20104

5 DSR Nos of hardware pkts as per technical specification. 20 104

Supply, Installation, Testing & Commissioning of 24 port

NON 10/100/1000Mbps, 4SFP module, L-2 Switch, POE as per Each 1 75949

6 DSR technical specifications. 75 949

NON Supply, Installation, Testing & Commissioning of Type Basic

7 DSR Phone account , Full duplex speaker phone, . 14 296

Supply, Installation, Testing & Commissioning of SFP+

NON 10GBASE-SR 10 Gigabit Ethernet Optics, 850 nm for up to 300 Nos 1 53053