Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹34.6 L+₹1.8 L (5.49%)Rejected-AOC BR GADGIL ROAD PUNE MAHARASHTRA 411030 INDIA | PUNE | MAHARASHTRA | 411030 | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹35.2 L+₹2.4 L (7.31%)Rejected-AOC | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹35.5 L+₹2.7 L (8.18%)Rejected-AOC | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹36.0 L+₹3.2 L (9.90%)Rejected-AOC | L5 | Rejected-AOC Higher bid value |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
10 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
REPAIR MAINT OF BR WORKS IN BLDGS OF GROUP II UNITS
2023_MES_597546_1
8539/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D category a(I)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹64,000
17 Jun 2023
23 May 2023
12 Jun 2023
23 May 2023
10 Jun 2023
5 Jun 2023
23 May 2023 - 29 May 2023
Amount
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed.
Dismantling asbestos cement (Corrugated or semicorrugated) sheets in roof covering etc complete all as specified and as directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets etc complete all as specified and as directed.
M & L for roof treatment of roof of bldg/stair Case/tank Portion including the following :- (i) Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. (ii) M & L for 25 mm thick Cement concrete type B-1, 1:2:4 (12.5 mm graded stone aggregate) as in top of roof. (iii) Screed bed or bedding layer or mortar 15mm thick layer of cement mortar 1:4 for laying floor finishes. (iv) Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces. (v) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric laid on primed surface by forced application etc complete all as specified and as directed. (vi)Applying two coats of aluminium paint on top of membrane @0.1 kg per sqm
Refixing of asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts etc complete all as specified and as directed.
S & F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap,fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws etc complete all as specified and as directed.
S&F for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.
S & F 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified.
S&F 4 mm thick veneered decorative Plywood (no of ply 05), grade-I (with BWR resin) with decorative face veneers on one face, fixed with screws to timber frame work complete all as specified and directed.
M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13 and n.exc 25 sqcm etc complete all as specified and as directed.
M&L for preparation of new wooden fillets surfaces and wood based surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer. in tint etc complete all as specified and as directed.
M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame etc complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level etc complete all as specified and as directed.
M & L for cement concretetype C-2, 1:3:6 (40mm graded stone aggregates) as in surface channels and drains etc complete all as specified and as directed.
M & L for Extra forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement etc complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing etc complete all as specified and as directed.
S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement etc complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick exc 0.11 Sqm but n exc 0.18 Sqm set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/coloured cement to match all as specified.
All as per item No 20 here-in-before but in skirting /dado etc complete all as specified and as directed.
S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.36 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement etc complete all as specified and as directed.
All as per item No 22 here-in-before but in skirting including 10mm thick plastering for backing coat in cement mortar 1:4 etc complete all as specified and as directed.
M&L for ceramic coloured printed tiles of size 300x200mmx7 mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in coloured and including 10mm thick CM (1:4) backing coat etc complete all as specified and as directed.
M&L for coloured glazed ceramic tiles in vertical surface 350x250x 7mm/ 450mmX350mmx 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick CM (1:4) backing coat complete all as specified and directed.
Demolition of brick work including all quoins arches pillars etc built in cement mortar etc complete all as specified and as directed.
M&L for brick work in cement mortar (1:6) using sub class 'B' bricks straight or curved on plan exc 6.0 m mean raidus etc complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan in any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed
Demolition of reed lathing single or double including battens and plaster or chicken wire lathing etc complete all as specified and as directed.
M&L for rendering 15 mm thick in CM 1:4 on one side of lathing finished even and smooth without using extra cement.
M&L for rendering 12 mm thick in CM 1:6 on other side of lathing finished even and smooth without using extra cement etc complete all as specified and as directed.
Taking down cement plaster on walls built in cement mortar etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for 15mm thick cement plastering in cement mortar 1:4 brick or concrete surfaces of wall finished fair and even,complete all as specified and directed.
M&L for 15mm thick cement plastering in cement mortar 1:6 brick or concrete surfaces of wall finished fair and even with out using extra cement complete all as specified and directed.
M&L for applying two coats of oil bound distemper on new plastered surfaces of walls over a coat of 3mm thick wall care putty incl preparation of surface complete all as specified and directed
Material and labour for preparation of new external surfaces of walls including cornices, plasters etc (Plastered or un plastered surfaces) and applying two coats of cement paint over a coat of primer complete all as per manufacture instructions all as specified and as diredted by Engineer-in-Charge .
M&L Preparation for new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.
M&L for PCC 1:3:6 type C2 (40mm graded stone agg) 75mm thick etc complete all as specified and as directed.
M/L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded agg in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position etc complete all as specified and as directed.
Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) etc complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each etc complete all as specified and as directed.
Taking down shutters of any description not exceeding 1 Sqm each etc complete all as specified and as directed.
M&L for preparing surface of wood and wood based material, new or old, of any description and girth and treaed with tar or coal tar black paint and sanding newly tarred surfaces with clean sharp sand etc complete all as specified and as directed.
S&F Post, joist, channel, angle or tee section fixed independently without connection plates etc conforming to Fe-410- W (Gde-E-250) quality A etc complete all as specified and as directed.
M&L for second class hardwood as in scantlings clean sawn timber fixed etc complete all as specified and as directed.
Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints, 2nd class HW etc complete all as specified and as directed.
Refixing of Shutter of any description exc 1 sqm and n exc 2 sqm each etc complete all as specified and as directed.
S&F factory made 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F for second class hardwood 35 mm thick factory made plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated etc complete all as specified and as directed.
S&F for second class hardwood glazed factory made and skeleton door shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats etc complete all as specified and as directed.
S&F for second class hardwood factory made glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats etc complete all as specified and as directed.
S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening etc complete all as specified and as directed.
S&F for Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site etc complete all as specified and as directed.
S&F anodised aluminium powder coated any colour frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified etc complete all as specified and as directed.
S&F for anodised aluminium powder coated any colour window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.
S&F for anodised aluminium powder coated any colour door shutter, aluminium section weighting 0.55 kg/m including necessary joining, cleats,glazing clips,rubbber neoprene, packing headls 2 nos in each door hinges anodised aluminium snap beading screw etc complete all as specified and as directed.
S&F Sheet glass 4.8mm thick clear/sun shade colour glass, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane etc complete all as specified and as directed.
Hacking out old broken glass of any thicknes size or description from wooden frames or metal frames fixed with wooden beads/ putty etc complete all as specified and as directed.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane etc complete all as specified and as directed.
S&F for galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and as directed.
S&F in repairs, galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and as directed.
M&L for prelaminated particle board 12mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination as in pelmet boxes or in narrow widths not exceeding 15 cm each, rebated or flat edged including 6mm thick teak wood lipping allround etc complete all as specified and as directed.
S&F Butt hinges, medium weight, cold rolled mild steel, 75mm size etc complete all as specified and as directed.
S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size etc complete all as specified and as directed.
S&F 300mm ordinary mild steel rat tail rod patttern springs includding roller and roller plate etc complete all as specified and as directed.
S&F Aluminium, anodised, barrel tower bolt 200mm long of extruded section and fixed etc complete all as specified and as directed.
S&F Aluminium, anodised, barrel tower bolt 150mm long of extruded section and fixed etc complete all as specified and as directed.
S&F for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed etc complete all as specified and as directed.
S&F Extruded aluminum alloy handles, fabricated type, anodised 100 mm size etc complete all as specified and as directed.
S&F in repairs/new Mortice lock,vertical type Brass 2 levers, size 100 mm etc complete all as specified and as directed.
S&F Extruded aluminum alloy handles, fabricated type, anodised 150 mm size etc complete all as specified and as directed.
S&F Harrison rails, 20mm dia mild steel, chromium plated with fixing brackets, stops, rollers etc. fixed in repairs etc complete all as specified and as directed.
S&F in repair/new for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F in repair/new floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed.
M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats etc complete all as specified and as directed.
M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.
M & L for preparation of newly untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed etc complete all as specified and as directed.
S&F in repair 15mm bore bib cock chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed etc complete all as specified and as directed.
S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screws etc complete all as specified and as directed.
S&F PVC Shelves of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms) etc complete all as specified and as directed.
S&F in repairs corner glass shelf assembly 250mm radius made of 6mm thick accralic glass, with CP railing, fixed with suitable rowal plug & screws complete all as specified and directed.
S&F in repairs PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed.
S&F in repairs for 15mm dia of pipe Angle valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed etc complete all as specified and as directed.
S&F in repair of PVC low level flushing cistern dual flush top push,10 Ltr capacity symphonic action type white as approved, ball valve float valve and handle, flush pipe incl CP bracket etc complete all as specified and as directed.
Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc complete all as specified and as directed.
S & F in repairs Vitreous China Urinal, full stall type, white incl urinal spreader (excluding flushing cistern, flush pipe and waste pipe etc complete all as specified and as directed.
Taking down PVC/AC/Salt glazed ware pipes and fittings upto 110mm etc complete all as specified and as directed.
S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc complete all as specified and as directed.
S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor etc complete all as specified and as directed.
S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and as directed.
S&F of 110mm dia PVC (SWR) bends etc complete all as specified and as directed.
S&F 75mm PVC(SWR) bends any radius with access door etc complete all as specified and as directed.
S&F of 75 mm dia PVC (SWR) Vent cowl etc complete all as specified and as directed.
S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof etc complete all as specified and as directed.
Taking up or down steel tubing and connections with all fittings for 15 mm bore GI tubing etc complete all as specified and as directed.
Taking up or down steel tubing and connections with all fittings for 20 mm bore GI tubing etc complete all as specified and as directed etc complete all as specified and as directed.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore etc complete all as specified and as directed.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore etc complete all as specified and as directed.
S & F waste coupling of PTMT (half or full threaded) 32 mm dia ,complete all as specified and as directed.
S&F in repairs vitreous china water closet Padestal pattern (white) excluding , flushing cistern and flush pipe and including EWC Sheet cover complete all as directed.
S&F plastic water closet seat cover, black closed pattern with flat bottom and cover and MS chromium plated or aluminium hanging device ,fixed in repair, complete all as specified and directed.
Supply and fixing in repairs vitreous china squatting pan water closet,Orrisa pattern of size 580mmx440mm white with integral foot rests excluding flushing cistertn and flush pipe etc complete all as specified and as directed.
S&F in repairs CP wall mixer (3 in 1) etc complete all as specified and as directed.
S&F in repairs CP Central hole basin mixer fancy type 15mm dia all as specified and directed.
S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed.
S&F in repair 15mm dia pillar tap cast copper alloy chromium plated fancy type (ISI Marked) etc complete all as specified and as directed.
S & F stainless steel sink, 1mm thick for kitchen with draining board with plug and PVC waste pipe including bedding in cement mortar, fixing brackets overall size 915x460mm, bowl size 410x330x 160mm, as fixed in repairs complete all as specified and directed.
S & F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames;window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 etc complete all as specified and as directed.
S&F PVC waste pipe, 32mm bore, 750mm long for basin, fixed in repair, complete all as specified and directed.
M/S RAHUL TRADING CO.
KAILASH KUMAR LADHA
M/S Lucky Builders
das enterprises
commercial enterprises
MS SADHNA RAHUL
SHRI MADAN SINGH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .