Construction of an Entrance Gate and Arch in tha boundary wall at Selvapuram IUDP Colony (528 houses) in Ward no 78 South Zone

Providing cast in situ cement concrete I: 11/2 : 3 (one cement, one and half M.Sand and three coarse aggregate) using 20mm size HBBG metal for 23cm dia pile including cost of materials labour, hire charges for machinery for earth work for forming 30cm dia bore hole to the required depth before concreting excluding cost of steel reinforcement (Data for 4.50 RM)

Earth work excavation for foundation in Hard stiff clay, suffblackcotton, hard red earth , shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20 Band Sand,silt or other looses oil, wetsand, or silt not underwater, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum as per the Direction of the Departmental officers etc. complete.

Plain cement concrete 1:4:8 (One part of cement, four parts of sand and eight parts of stone jelly by volume) using of 40 mm thick granite hard broken stones, all machine mixed, laid to uniform thickness of 100mm and top left rought to receive floor finish including all labour charges for concreting, ramming, curing etc, and providing expansion joints, slopes & grades if any etc., complete complying with relevant standard specifications at all leads & lifts inside the building.

Supplying and erecting centering for sides and soffits including supports and strutting for plain surfaces such asreinforced cement concrete slabs, walls etc., complete

Supplying and erecting CENTERING for sides and soffits including supports and strutting-upto 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOCKS. STAIRCASE WAIST and landing slabs, landing beams, canopy etc.,

Refilling with excavated soil (other thansand) complying with standard specification for filling in foundation and basement.(W-0075)

Reinforced Cement Concrete 1:1.5:3, one part of cement, one and half parts of sand , three parts of 20 mm hard blue granite metal by volume, characteristic strength not less than 20 N/sqmm) machine mixed for all reinforced Cement Concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with the relevant standard specifications at all leads inside the building.

Plastering for concrete surfaces using cement mortar 1:5(One part of cement, five parts of sand by volume) thickness 12 mm (average) for all internal/external surfaces for drains etc., finished smoothly to one Jevel including curing etc., complete, at all leads and at all heights.

Supplying and fabricating of reinforcement steel of all diameters for reinforced cement concrete works at all heights and depths including straightening,cleaning,cutting,ending, placing in position and binding, hoisting and welding if any including cost of power, electrodes etc, cost of annealed binding wire (18 gauge), providing overlaps, tying in positionand providing necessary cover blocks for all works as per - detailed drawings supplied (including chairs, cranks, lap rods, spacer bars, fan hooks etc.,) with the relevant standard specifications, complete for all leads & lifts.

Fly ash Brick work in Cement mortar 1:5 mix ( One cement, Five m.Sand) using lind class ground moulded Burnt bricks from Approved Chamber eto. Complete

Plastic emulsion paint with approved colour best quality paint as per the departmental officers two coats of emulsion paint over one primer coat including cleaning scraping removal of dust and pop putty works where as require data

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (MSand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Supplying, fabricating, erecting structural steel work for roofing weldedor bolted type using MS channels, angles, plates and round bars etc.conforming to IS specification including primer coating and enamal paintingas per Design given by the departmental officers etc, complete as per standard specificationetc.,complete

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. (SI.No.368)