SPL REPAIR TO CENTRAL LECTURE POST CLP AT 9 FFA BEIRCHHA AT THE INF SCHOOL MHOW UNDER GE MIS MHOW

Amount

S & F Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

S & F in repairs Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

S&F in repairs coloured powder coated aluminium frame for door, windows , ventilators, partisions with one or more rebates inluding jointing cleats of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, and fixing with wall/ceiling columns/beams etc complete all as specified and directed.

S&F in repairs aluminium coloured power coated window and ventilator shutters, sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified and directed.

S&F in repairs aluminium coloured power coated door shutters, aluminium section weighing min 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. .

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty in squares. not exc 0.5 Sqm each complete all as specified and as directed.

S&F in repairs aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs prelaminated particle board 18/19mm thick interior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works as in cupboard shutter / cupboard shelves, pelmet, with and including external teak wood lipping 6mm thick and 18/19mm wide fixed with nails on edges complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions ,arcches , pillars etc complete all as specified and as directed.

M&L for brick work with using flyash brick modular size in CM (1:6 ), straight or curved on plan exceeding 6m mean radius complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:6 ) on fair faces of wall/ concrete surfaces finish even and fair complete all as specified and directed.

M&L for applying two coats of 1st Quality oil emulsion distember over new prepared surface of wall with putty complete all as specified and directed. Note:- Putty shall be measured and paid seperately.

M&L for preparation of new plastered surfaces of walls and applying two coat of Acrylic Smooth exterior paint of required shade (@ 1.67 ltr/10 sqm) over over a coat of primer(@ 2.20 kg/10 sqm) same make base complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying two coat of 1st quality oil emulsion distemper white/coloured of Ist quality over one coat of cement base white wall care based putty (where it is required in Patches) all as specified and directed by Engr-in-Charge. Note:- Putty shall be measured and paid seperately.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying and applying two coat of Acrylic Smooth exterior paint of required shade (@ 1.67 ltr/10 sqm) over over a coat of primer(@ 2.20 kg/10 sqm) same make base white cement based putty (where it is required in patches) complete all as specified and directed. Note:-Putty shall be measured and paid seperately.

M&L for preparation of old painted surfaces of steel/steel based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of newly plaster surface of wall and and applying 2mm thick cement base wall care putty in two coat (each coat not less than 1mm) finished even and smooth complete all as specified and directed

M&L for complete removal of existing treatment of wall (any no. of layers) and applying 2mm thick white cement base wall care putty in two coats (each coat not less than 1mm) over a coat of cement base primer on walls and surface finished even and smooth with sand paper complete all as specified and directed

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land complete all as specified and as directed.

M&L for PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub base, levelling course, etc complete all as specified and as directed.

M&L for PCC1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor etc complete all as specified and directed

M&L for 75mm thick cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in floor/ plinth protection finished the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and using necessary form work etc complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors complete all as specified and as directed.

M&L for machine cut kota stone slab in flooring 20-25mm thick of size not less than 595x595 as in floor and laid over and including 15mm thick screed bed in CM 1:6 & set jointed and pointed cement mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

M&L for 18-20 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete all as specified and directed.

Providing edge moulding/ Groove Cutting in granite to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 80mm thick machine pressed rubber moulded precast concrete coloured interlocking paver block (glossy finished) of M-40 grade of approved shape, size and colour conforming to IS 15658-2006 including joints filled with sand and stone dust 25mm thick as in levelling course of interlocking complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for preparation of concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of plastic emulsion paint over a coat of concrete primer complete all as specified and directed.

Dismantling of Asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) 150Gsm Corrugated sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) 150Gsm Plain sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified and directed.

S&F mild steel Hollow Section work in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming FE-410W Gde E 250 quality A complete all as specified and as directed.

M&L for preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed

Supply only Liquid Water proofing compound complete all as specified and as directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed

S & F Anodised aluminium snap grid size (605mmx605mm) frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

M & L for Exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified.

S & F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

M&L for RCC Nominal Mix (1:2:4), type B1 (using 20 mm graded stone aggregate) as in beams, bands, cantilvers, bressummers, linters,tank platform, chajjas, etc over 1.5m span etc complete all as specified and directed

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping), etc for fair finish surface complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 49.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

RK CONSTRUCTION (BID ID -3332027)

sunway associates (BID ID -3340040)

M/S Sunshine Construction (BID ID -3339392)

ram prashad chotelal batham (BID ID -3339829)

SATHI ENTERPRISES (BID ID -3331561)