SPECIAL REPAIR TO BUILDING No T-65A AND T-19A OF UNIT 14 WEU AT OLD AIR FIELD SRINAGAR UNDER GE 970 EWS

Amount

Taking down shutters of any description exc 1.00 Sqm and n exc 2.00 Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed by Engr-in-Charge.

Supply and fix 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed by Engr-in-Charge.

Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engr-in-Charge.

Supply and fix powder coated Anodised aluminium gauged window and ventilator shutters, sliding type with sash bars of size of styles 50x20mm,aluminium section weighing not less than 0.55 kg/m and glazed/gauged with glass pans/stainless steel fly proofing including necessary joining cleats, glazing clips,handles, tower bolts, rubber packing, anodised aluminium snap beading, screws, anodized aluminium fitting such as concealed type handle with locking arrangement one in each shutter with and including sliding on two track frame and pvc good quality two nos. roller in each shutter etc. complete all as specified and directed by Engr-in-Charge.

Supply and fix powder coated Anodised aluminium ventilator shutters, side hung type without sash bar, aluminium section weighing not less than 0.55 kg/m and glazed/gauged with glass pans/stainless steel fly proofing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodized aluminium fitting such as peg stays 150mm (1 no.) hinges type B-21 100mm long (2 nos.) american suitable handle (1 no.) of size 75mm, tower bolt 100mm long (2 nos.) etc. complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium grill 6.25mm dia of required design and shape fixed in aluminium window with and including nesessary cutting, screwing, aluminium beeding/ cleats etc complete all as specified and directed by Engr in charge.

S&F for anodised power coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr in charge.

Supply and fix in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Supply and fix in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares exceeding 0.50 Sqm in each pane complete all as specified and directed.

M&L for 9mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with necessary joining cleats, glazing clips, ruber neoprene packing to aluminium partation frame work complete all as specified and as directed.

Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

Supply and fix solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed by Engr-in-Charge.

Supply & fix door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified.

Supply and fix aluminium mortice lock, vertical type size 100mm,4 lever complete all as specified and directed.

S&F 12mm thick Gypsum board fixed in false ceiling grid made with anodized GI powder coated frame work with 605mm x 605mm size snap gird fixed with screws / staples and hangers 4 mm dia. G.I. wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete including dismantling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets as directed by Engineer-in-Charge.

Supply and fix Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame including dismanteling wall boarding any description and fixed in any position all as specified and directed.

Supply and fix 5mm thick single side prelam PVC sheet in srips & channel feathered at the edges for fixing on Solid PVC wall lining, insulated PVC wall lining and solid PVC partitions inclusive of solvent cement and fixing at site complete all as specified and directed.

M&L for 2nd class hard wood plain fillets in square, rectangular or triangular in section, clean sawn secured with nails or brads sectional area exc 13sq cm & n exc 25 sq cm, including two coats of french polish complete all as specified and as directed.

S&F 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in partition wall/cupboards including dismanteling boarding any description and fixed in any position all as specified and directed by Engr-in-Charge.

S&F 1mm thick decorative laminate type-1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per marker's instructions complete all as specified and as directed.

M&L for 2nd class hard wood plain fillets in square, rectangular or triangular in section, clean sawn secured with nails or brads sectional area n exc 3 sq cm, complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed by Engr-in-Chage.

S&F factory made solid PVC door Frame of size 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed by Engr-in-Chage.

Supply & fix 125 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

S&F 150mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.

S&F 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge.

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed by Engr-in-Charge.

Supply & fix in repair 300 mm long aluminum anodized sliding door bolt, plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F in repair Floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixed in floor of length 150mm complete all as specified and directed by Engr-in-Charge.

M&L for preparation treated/un-treared wooden and wood based surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern in roof coverings complete all as specified and directed.

Fixing only 0.63 mm galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with J or L type hooks and washers in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F 0.63 mm galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with J or L type hooks and washers in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

S&F 1.25 mm thick plain galvanised,mild steel sheeting, with grade of zinc coating 275 as in ridges, hips vally gutters drip and straight flashing (length and grith as fixed) with and including dismantling plain steel sheeting, any gauge, thickness, including nainital or similar roof covering complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel and iron surfaces of any description, over 10 cm width or girth , and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel and iron surfaces of any description, over 10 cm width or girth , and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L for preparing old plastered surface of walls upto true finished surface and applying two coats of cement based paint complete all as specified and directed by Engr -in-Charge.

M&L for preparing old plastered surface of walls upto true finished surface and applying one coat of cement based paint complete all as specified and directed by Engr -in-Charge.

M&L Second class hard-wood in scantlings timber framed and fixed including dismantling scantling 40 Sqcm and over in section in any position complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section including trusses in any position complete all as specified and directed.

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

Supply and fix mild steel rolled section as in roof trusses (framed), trussed, purlins, crane grantries, rails and fastening and heavy brackets framing (Beam, tee, channel or flat section) incluidng distance pieces cleats etc conforming to Fe-410. Gde-E-250 including all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick & removing the surplus spoil at adistance exc. 50m & not exc. 100m complete all as specified and directed.

Supply and fix compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like inlcuding caps, bases, spices etc built up from two or more beam or channel ections or angles with plates including all lattice bars, stiffeners, gusset plates etc conforming to Fe 410-W (Gde E-250) quality - B complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with necessary MS clamps complete all as specified and directed by Engr-in-Charge.

All as per Srl item No 47 here-in-before above but 75mm bore

S&F 110 mm PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

All as per Srl item No 49 here-in-before above but 75mm bore

Supply & fix PVC (SWR) 75mm bore floor trap plain with grating including jointing with waste pipe with adhesive complete all as specified and directed.

S&F rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including dismantling water tank of capacity 1000 Ltrs and 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed by Engr -in-Charge.

S&F 15 mm bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by the Engr-in-Charge.

S&F in repair CP Stop valves conclead type (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed by the Engr-in-Charge.

Supply and fix in repairs grating doom 100mm dia PTMT (Minimum weight 25 gms) complete all as specified and directed

S&F towel rail 600 mm long of PTMT fixed with and incl Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) all as specified and directed by Engr-in-Charge.

S&F Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap with and including plastic water closet seat cover , connection to trap, flushing pipe & anti -syphonage pipe etc including necessary materials for fittings & making good to floor complete all as specified and directed by Engr-in-Charge.

Supply & fix wash hand basin vitreous china coloured, flat back, size 550 x 400 mm with a set of CI brackets, brass chromium plated waste fittings and PVC waste pipe 32 mm bore, including chinaware pedestal for waste pipe, connection to water tubing, PVC connection 15mm dia with brass check nuts incl CP 15mm brass centre hole mixture complete all as specified.

Material & labour for granite (of any type) work, 18 to 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 10mm thick in cement mortar (1:4) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections complete all as specified and directed.

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections complete all as specified and directed.

M&L Lagging to pipes used in internal water supply (internal dia of pipe 20mm) or plumbing all round with,25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 all as specified and directed by the Engr-in-Charge.

Material & labour for 25mm dia mild steel pipe curtain rod, powder coated fixed with & including MS powder coated hooks/ brackets and decorative finials (at both side), curtain rings (minimum 5 Nos rings per running mtr of curtain rod) shade as approved by GE complete all as specified includng fixing of long size rawl plugs in wall for MS hook including taking out the existing old pelmet box along with old curtain rods complete all as specified and directed.

Dismantling floor, hearth or wall tiling/ china moisac including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

M&L non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge

M&L non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:4) compete all as specified and directed by Engr-in-Charge.

M&L designed vitrified ceramic tiles coloured pattern as required 10mm thick (Square/rectangular) area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matches with and including over 15mm thick screed bed in CM 1:6 compete all as specified and directed by Engr-in-Charge

M&L glazed ceramic coloured, tiles in 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engr-in-Charge

Supply & fix in repair 40 mm dia cupboard knobs of brass duly polished, with nuts, screw and washer of mild steel bright finished complete all as specified.

Supply & fix brass handle of 100 mm size complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling 40mm dia; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Material & labour for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate), as in sub base complete all as specified & directed.

Material & labour for chequered cement concrete coloured tiles 30cm x 30cm x 25mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finishing the surfaces even and smooth without using extra cement with and including taking down cement plaster from walls and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.

M&L rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finishing the surfaces even and smooth without using extra cement with and including taking down cement plaster from walls and applying two coats of cemet based paint complete all as specified and directed by Engr-in-Charge.

S&F in repair 15 mm dia CP Central Hole Basin Mixer without Pop-up waste system complete all as specified and directed by Engr-in-Charge.

S&F in repair 15 mm dia chromium plated Wall Mixer Telephonic with Crutch (Provision for hand shower) and complete set of hand shower complete all as specified and directed by Engr-in-Charge.

S&F in repair 15 mm bib cock two way double handle complete all as specified and directed by the Engr-in-Charge .

S&F in repair health faucet with hooks and one meter tube full brass, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs toilet paper holder vitreous china coloured, box type fixed to walls with chromium plated brass screws complete all as specified.

Supply & fix in repairs soap dish 100x100x60mm size steel chromium plated fixed to wall with plugs and chromium plated screws complete all as specified

Supply and fixing 30cm corner glass shelf with and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed.

Taking down carefully existing aluminium/copper point wiring for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Taking down old and unserviceable, distribution board/main switch of any type including fuses, MCBs etc after removing all connections and making good the disturbed surface all as directed by Engr-in-charge

Material & labour for point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLSH) drawn through and including PVC casing caping/conduit of suitable size bore (ISI marked) and accessories fixed on surface, terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLSH), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan point / bell push point controlled by one way switch 5 Amprs and/or through regulator complete all as specified and directed. complete all as specified.

All as per description of srl item No 87 here-in-before but 5 Amp socket outlet on independent board.

All as per description of srl item No 87 here-in-before but 5 Amp socket outlet on same board.

All as per description of srl item No 87 here in before but using 2.5 sqmm (nominal area) PVC stranded copper conductor cable with 1.5 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin socket out let 15 Amps on independent board.

All as per description of srl item No 87 here-in-before but one push button on the same board with other switches or independent complete all as specified and directed.

Supply and fix in repairs sheet metal enclosures for DB's with 200 Amp rated bus bar double door class IP-43 epoxy coated inside and outside 12 way SPN 240 volts complete all as specified and directed.

Supply and fix in repair MCB SP 6 to 30 Amp, 240 volts,10 KA, C-curve complete all as specified and directed.

Supply and fix in repair MCB SPN 6 to 32 Amp, 240 volts,10 KA, C-curve complete all as specified and directed.

Supply and fix in repair MCB SPN 63 Amp, 240 volts,10 KA, C-curve complete all as specified and directed.

Supply and fix two pin and earth metal plug and socket complete with on one single pole MCB 20Amp, 240Volts complete all as specified and directed.

Supply and fix in repair switch piano flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed .

Supply and fix in repair Switch socket combination 2 in 1, 5 Amps 240 V AC flush type universal, complete all as specified and directed.

Supply and fix in repair Switch socket combination 2 in 1, 3 pin 5/15 Amps 240 V AC flush type universal, complete all as specified and directed.

Supply and fix in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as directed and specified by Engr-in-Charge.

Supply and fix in repair Ceiling rose, 2/3 terminals PVC all as specified and directed

Supply and fix in repair Socket outlet flush type 2 in 1, 3 pin 5 Amp, 230 V AC complete all as specified and directed.

Supply and fix in repair switch bell push flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed

Supply and fix in repair call bell multi music type AC single phase, 230 volts including wooden/ PVC board of suitable size, connecting & testing complete all as specified and directed.

Supply and fix in repairs 1X18/20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.95 with all accessories and connecting up with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed. make : BAJAJ Cat part No : 112410BCLSB 18NW or equivalent make as given in appendix 'E' of particular specification. Note (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 report of NABL accedited labortory from manufaturers.

Material and labour for earthing complete with galvanised steel earth plate electrode 60cmx 60cmx 6.00 mm thick buried directly in ground (Earth pit not less than 2.25 metre below normal ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected and including GI strip 32mm x 6mm by means of GI bolts, nuts, check nuts and washers, earth plate surrounded by packed alternate layers of coal dust and common salt 15cm thick, all around top and bottom and watering pipe 40mm bore of GI pipe light grade with funnel and wire mesh and 50mm bore GI pipe light grade for protection of GI strip 32mmx6mm from top of earth plate upto test point (upto 7.5metre in length) connected with suitable size of GI nuts, bolts and washers all as shown in Electrical plate No. 3 of SSR Part-I, testing on completion including excavation/earth work in any type of soil/rock, PCC chamber (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways with suitable handle for lifting arrangement & including formwork and MS frame using MS angle iron 25x25x3mm complete all as specified and directed. Note :- Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit

Supply and fix for Recess mounting LED troffer type fitting 1X36 watts while powder coated CRCA housing with LEDs seamless front frame with flate white high transmission acrylic cover 220 volts complete all as specified and directed. make : CG Cat part No : BZRQL 36WGZ1WH or equivalent make as given in appendix 'E' of particular specification. Note (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 report of NABL accedited labortory from manufaturers.

Supply and Fix in repair of LED Based Energy saving & environmental friendly long life versatile flood light Lumos IP-66 60W with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion suitable for mounting bracket complete with all accessories including lamp and 2 core copper connecting cable of size 2.5 sqmm from junction box to light fitting (Approx 7 Mtr) complete and fixed on existing pole bracket complete all as specified. Make : bajaj Cat Part No.BARFEG 60W LED of Bajaj or equivalent make as given in appendix 'E' of particular specification. Note: (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 report of NABL accedited labortory from manufaturers.

Supply and fix Lamp holder insulated body with Back plate for batton/angular fittings including LED lamp 9 Watt all as specified and directed.

Material and labour for sub main wiring in repairs with two runs of single core PVC insulated (FRLS) unsheathed copper conductor multistranded cable of size 4 sqmm 1100 volts grade drawn through in & including PVC conduit 25mm dia & 2.5 sqmm single core copper conductor multistranded PVC insulated (FRLS) unsheathed cableas earth wire continuity conductor complete all as specified and directed by Engineer in charge. Note : (i) Two run of cable 4 sqmm and one run of 2.5 sqmm earth wire shall be measured and paid as one unit only. (ii)Phase should be Red / Yellow / Blue, neutral should be black and earthing wire should be green in colour

Supply & fix Bulk head fitting energy saving 10 W LED with opal diffuser light fitting including necessary fixing arrangements complete all as specified and directed. Make : bajaj Cat Part No.LHOAOP7UZ6WO10 of Bajaj or equivalent make as given in appendix 'E' of particular specification. Note (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 report of NABL accedited labortory from manufaturers.

Supply and fix sheet metal enclosures for VTPN DB's with 200 Amp,415 volts rated bus bar double door, 6 way suitable for incoming MCCbs 100 Amp complete all as specified and directed.

Supply and fix in repair of moulded case circuit breaker 4 pole, 415V 50Hz, 63 Amps with breaking capacity 16 KA with adjustable thermal and magnetic relay incl replacement of lugs complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs Fluorescent tube light fitting, LED batten with aluminium housing provided for efficient heat dissipation wirh polycarbonate diffuser and integrated electronic driver, 1x 10W 2 feet light fitting with white acrylic cover along with LED lamp white colour complete and connecteing electrically to ceiling rose using PVC insulated and overall sheated flexible copper conductor of size 0.75 Sqmm 3 core fixed complete all as specified and directed. Make : bajaj Cat Part No.LHEXBQP6IN1W010 of Bajaj or equivalent make as given in appendix 'E' of particular specification. Note (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 report of NABL accedited labortory from manufaturers.

M/S B S CONSTRUCTIONS

M/S GHULAM HASSAN KUCHAY

M/s Bashir Enterprises