SPECIAL REPAIR OF AUDITORIUM AT RTC AND ADDN/ALTN TO FIRST FLOOR OF BLDG NO P-18 AT CH (CC) UNDER GE E/M LUCKNOW

Amount

Dismantling of roof sheet (any descriptions) including ridges in roof covering all as specified and directed. (Note:- Rate quoted by the bidders deemed to be included for necessary arragments for working upto 20m height & safety measures)

Dismantling of roof sheet (any descriptions) including ridges in roof covering all as specified and directed.

M & L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. Fixed with L-type or J-type or cranked hook bolts (Note:- Rate quoted by the bidders deemed to be included for necessary arragments for working upto 20m height & safety measures)

Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for rendering 10 mm thick on brick work/ concrete surfaces in cement mortar 1:6 on fair faces finished fair & even, complete all as specified and directed.

M&L for applying two coat of oil bound disemper over one coat of oil base primer over and including 3mm average thick wall care putty over newly plastered surfaces complete all as specified and directed (Note:-wall care putty to be appylied in two layers with average thickness of 1.5mm thick each coat)

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed. (Note:- Rate quoted by the bidders deemed to be included for necessary arragments for working upto 15m height & safety measures)

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

Providing and fixing of E-board 'Everest' make 600x600x4mm thick white prelaminated seif embosed reinforced designer ceiling board tiles of approved texture at all height laid on existing grids , complete all as specified and directed. (Note:- Rate quoted by the bidders deemed to be included for necessary arragments for working upto 15m height & safety measures)

M & L for 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws area of each tile exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and directed. (Note:- Rate quoted by the bidders deemed to be included for necessary arragments for working upto 15m height & safety measures)

S&F in 0.50 mm Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting made to any shape or Semi-ciruclar any colour having tensile strength of 550 Mpa as in roof covering/ cladding complete with self tapping screw including dismantling of existing roof sheet complete all as specified and directed. (Note:- Rate quoted by the bidders deemed to be included for necessary arragments for working upto 20m height & safety measures)

S&F in 0.50 mm Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting made to any shape or Semi-ciruclar any colour having tensile strength of 550 Mpa as in roof covering/ cladding complete with self tapping screw including dismantling of existing roof sheet complete all as specified and directed.

M&L for applying one coat of oil bound disemper over and including preparation of surfaces any type in ceiling complete all as specified and directed. (Note:- Rate quoted by the bidders deemed to be included for necessary arragments for working upto 15m height & safety measures)

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping,padding and bed block, wall through and the like including weathering slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 20 mm bore complete all as specified and directed.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L 25 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L 40 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S & F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (single Tee) equal or unequal with access door, complete all as specified and directed.

M& L machine cut Kota stone slab flooring 20-25 mm thick designer pattern with marble stone as directed by Engr- in -charge over and including cement screed bed 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including dismantling of exising stone flooring, complete all as specified and directed.

Grinding of kota stone flooring upto mirror finish level including polisihig etc complete all as specified and directed.

M& L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20mm thick screed in cement mortar 1:6 complete all as specified and directed.

M&L for complete removal existing treatment and preparation of old plastered surfaces and applying two coat of oil bound disemper over one coat of oil base primer over and including 3mm (average thickness) wall care putty in two layer complete all as specified and directed (Note:-wall care putty to be appylied in two layers with average thickness of 1.5mm thick each coat)

M&L for complete removal existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and including 2mm average thick wall care putty over wall surfaces, complete all as specified and directed. (Note:- Rate quoted by the bidders deemed to be included for necessary arragments for working upto 20m height & safety measures)

Hacking out old broken glass panes of any thickness, size ,quality or description from wooden frames/steel frames, complete all as specified and directed.

S&F glass pan ordinary quality 3mm thick and glazing with oil putty/ wooden beads/clips in any shape or enrich design upto 1sqm in each pane, complete all as specified and directed.

S & F in repair for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

M & L for applying one coats of synthetic enamel paints over old wooden surfaces of any description, not otherwise described,over 10cm width or girth including preparation of surfaces, complete all as specified and directed.

M & L for complete removal of existing paint on wooden surface of any type with grinder on and preparation of old surfaces applying synthetic enamel paint with two coats of synthetic enamel paint exc 10 cm width or girth complete all as specified and directed.

M & L for applying one coats of synthetic enamel paints old steel surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surfaces, complete all as specified and directed.

Repairing of existing panelled door (shutters and chowkhats) single/double leaf including taking down and refixing of chowkhats (with shutters) or shutters as required and repair/replacement of any members (i.e panel shutter, frame, styles, chowkhats etc) and making the door and shutter serviceable complete all as specified and directed. (Note:- Cost for replacement of any members and hinges required are deemed to be included in rate quoted by the contract)

S & F in repair for 300mm long Aluminium anodised,barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S & F in repair for 150mm long Aluminium handles, cast type, anodised, complete all as specified and directed.

S & F in repair for 375mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

M&L for brick work with fly ash bricks as per IS 12894 -2002 straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and directed.

M & L for 4mm dia plain mild steel wire, galvanised class 3, as in detached work such as for mosquito nets and fixing with and including straining bolts, hooks, eyes, etc, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base, foundation etc complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.complete all as specified and directed.

S&F of Soft Fibre Acoustical Suspended Ceiling System,Bevelled Tegular Edge Tiles With Suprafine 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, , Colour white/Black, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% GW & 74% RW. The tile shall be laid on Armstrong Suprafine 32 or equivalent with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 14 Kgs/M2 with a minimum pull out strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong or other equivalent make .

M&L Suspended ceiling, comprising 12.5 mm thick reinforced gypsum plaster boards Conforming to IS-2095 , GI perimeter channels, intermdiate channels, etc. including finishing the exposed surfaces with Oil bound distemper two coats complete all as specified and directed.

Providing and Fixing Channelled Woodworks perforated panels of width 128mm, thickness of 16mm and length 2440 mm or as required by the Engineer-in-charge, made of a high density particle board substrate with a laminated / veneered facing as per the approved shade/ species & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a (“Helmholtz” fluted perforation of 2mm width and 14mm of visible panel / 4mm width and 28mm visible panel) each. The panels shall provide a minimum sag resistance of RH90 and a fire rating class of 1 as per Part 7 of BS 476. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece. The panels shall be mounted on special aluminium splines using clips as approved by the Engineer-in-Charge. INSTALLATION PROCEDURE: Install wooden battens (provided by others) of section 50mmx50mm or as approved by the Engineer-in-charge on the solid wall horizontally using screws and plugs at spacing of 600mm centre-to-centre. Screw the aluminium extruded keel for channelled woodworks (GTPT001) provided and as approved by Engineer-in-charge over the lowest and second wooden batten at an on-center distance of 600mm. Install the first set of wooden panels by inserting the clips for border channelled woodworks (GTPT002) and insert the groove of the panel into the projecting flange of the aluminium clip. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing clips for inside channelled woodworks (GTPT003) into the next keel till the actual height is achieved. Use clips for border channelled woodworks (GTPT002) to finish off the installation. Finish off the edges using wooden moulding of matching colour.

Taking down chowkhats or frame (wooden/aluminium) n. exc. 1.5 Sqm each with shutters (with out taking off shutters from the frame) and taken as credit complete all as specified and directed.

Taking down chowkhats or frames (wooden/aluminium) with shutters without taking off shutter from the frames exc. 1.5 but n. exc 4 sqm each complete all as specified and directed.

S&F for Aluminium anodised sections ( conforming to IS) door frames with single/double leaf shutters complete duly fitted with with frame of size 100mmx 44.45mm wide fabricated with 2mm thick section , shutter with 44.45mm wide fabricated with 2mm thick section having vertical, middle and top rail 83.50mm, bottom rail 115mm and neosprene rubber beading,heat absorbing glass panes 4.8 mm nominal thickness , Handle 2 Nos in each shutter, Aluminium tower 1 Nos in each shutter and necessary locking arrangement with mortice lock with duplicate key complete all as specified and as directed.

Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of mild steel heavy duty fixed, complete all as specified and directed.

S&F for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&f for 4.80 mm thick sheet glass odinary qulity and glazing with neosprene beading exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F for powder coated aluminium partition with aluminium composite panel at bottom panel and 5.5mm thick frosted glass on top panel incl glazing clip and neosprene rubber beading with proving a door with same material with complete fixing and locking arrangments in each cabin/cabinet complete fixing arrangments complete all as specified and directed.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick work surface finished even and fair without using extra cement, complete all as specified and directed. (Note : Integral WPC shall be measured and paid seprately )

Supply only integral water proofing compound powder conforming to IS specification, complete all as specified and directed.

M&L for applying two coats of exterior emulsion(weather coat of approved quality)/Apex paint over a coat primer on wall sufaces.Incl a coat of 2mm thick wall care putty over newly/old plastered surfaces including preparation complete all as specified and directed. (Note:- paint/primer to be applied with mechanical means/spray machine)

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Grade Fe- 290 (Gde E- 165) complete all as specified and directed.

M&L 6-10mm thick exterior wall tiles (any design and pattern) of area of each tiles not exceeding 0.18 sqm as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 10mm thick rendering in CM 1:3, complete all as specified and directed.

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 2 , universal type , suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed, complete all as specified and directed.

S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size of brass body, complete all as specified and directed.

S &F in repair 3mm thick aluminium composite panel with glazing clip and neosprene rubber beading complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 10mm thick screed in CM 1:3, complete all as specified and directed.

S&F powder coated anodised Aluminium alloy sections sliding windows shutters with frames comprising Series -C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips,locking device, heat absorbing glass 4.8 mm nominal thicknes in 2 shutters and 0.46mm dia SS wiremesh in one shutter complete all as specified and as directed

M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15mm thick screed in CM 1:6, complete all as specified and directed.

M&L Vitrified ceramic tiles 10mm thick (square/ractangular) Coloured polished tiles, area of each tile n.exc 0.38 sq m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match over and including 15 mm thick screeding in CM 1:6, complete all as specified and directed.

Dismantling floor, stone flooring, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified and directed.

M & L for 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work or in making shelves or cupboards etc with plywood framing only complete all as specified and directed. (Note:- All required accesories like hinges for cupbaord, handles, magnatic locks etc are included in rates quoted by the bidder)

M & L for Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads with section area exc 13 sqcm but n. exc 25 sqcm complete all as specified and directed

Dismantling of existing roof treatment of any description including M&L for water proofing treatment on roof surfaces in the following manner:- (a) M&L 15mm thick screed plaster on RCC slab in CM 1:4 using water proofing compound @ 3% by weight of cement (b) The surfaces shall be painted with hot bitumen grade 30/40 confirming to IS-73 @ 1.20 kg/sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 ltr/sqm. (c) supply & lay 3 mm thick APP water proofing membrane reinforced with non woven polyster matt laid using butane torch by torch on application with a side lap of 10 cm & 15 cm end lap weinghing not less than 3 kg/sqm.

Taking up or down steel tubing and connections 25 mm bore including cleaning for refixing or removal to store, complete all as specified and directed

S&F tubes 15 mm bore "medium grade" with and including all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring aluminium/ copper from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets,bell push , ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and complete all as specified and directed.

M & L for concealed point wiring One light/fan/ bell point controlled by one, one way switch on wall and ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good for matching of new surfaces complete all as specified and directed.

All as per item No 72 above but One 3 pin 5 Amp socket outlet on the same board with other switches.

All as per item No 72 above but One 3 pin 5 Amp socket outlet on independent board with other switches.

All as per item No 72 above but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

All as per item No 72 above but for power point wiring with 4.0 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 4.0 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

S&F switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified and directed.

S&F Switch socket combination 3 pin, 6/5 Amp piano flush type including complete all as specified and directed.

S&F Switch socket combination 3 pin, 6/16 Amp piano flush type including complete all as specified and directed.

S&F Lamp holder insulated body with back plate for batten fitting complete all as specified and directed.

M&L Ceiling rose surface bakelite 65x50mm, three terminals complete all as specified and directed.

Supply & Fixing medium step type fan regulator 80 Watt, 240 Volt AC, socket size, medium step" ISI marked complete all as specified and directed.

Supply & fixing in replacement ceiling fans complete with blades, downrod accessories 230 V , 1400 mm sweep, copper wounded 3 star rated complete all as specified and directed.

Supply and fixing in replacement of Mirror optic fitting by recess/surface mounted mirror optic LED luminaire fitting with paralite P5 louvers 33/40 watt LED, 5700 K, dimention 595mm x 595mm fitting for grid type ceiling including control driver and other accessories complete all as specified and directed.

S&F Wall mounted LED batten 18/20 Watt with 01 No LED tube rod,extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver including dismantling taking down unsv FTL fitting T8 type any type complete all as specified and directed.

Supply & installation ,testing commissionig of vertical TPN MCB distribution board,415 Volts 8 way with 100 Amps 25 KA MCCB as incommer,phosphatised powder coated,double door,transsulent type neutral link and earth bar,dust protected,inclusive of 100 amp tinnesbar,din raill for mounting of MCBs,loose wire enclouser detachable gland plate and inter connection between incomer MCCB and busbar duly prewired IP - 43 protection and suitably fixing on wall using nuts and bolts grouted in PCC and inclusive of MCB SPN 15 -60 Amp - 12 Nos complete all as specified and directed.

M&L in replacement for Sub main wiring with two runs of 10 Sqmm single core FRLS PVC insulated but in unsheathed multi stranded copper conductor cable 1100 volts grade drawn through and including of 25mm dia PVC rigid conduit medium with conduit accessories and fixed to the surface of wall/ceiling as per ISI including 6.0 Sqmm PVC insulated copper conductor earth continuity wire complete all as specified and directed.

S&F in replacement Factory made, sheet metal distribution boards, double door protection class IP-42 suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 r of the SP & SPN 12 ways complete all as specified and directed.

S&F in replacement MCB SP 5 to 32 amps 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating complete all as specified and directed.

All as per item No 89 above but SPN 32 to 63 amps.

M&L Earthing complete with galvanized steel plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground earth pit not less than 2.25 meter deep below normal ground level with top edge of the plate not less than 1.5m below normal ground level connected to galvanized wire 25x 4 mm GI strip by means of bolts, nuts, check nuts and washer of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to continuous earth wire on pole all as specified and testing on completion, including provision of earth wire protected by 15mm dia GI light grade protection pipe from test point to main board and 20mm GI medium grade watering pipe funnel, PCC earth pit and RCC cover charcoal, salt and GI wire including excavation and earth work etc complete all as specified and directed.

Supply and fix wall mounted fans complete with blades 400mm sweep,1280 RPM and other connected accessories 230 V complete all as specified and directed.

S&F Moduler switch 10 Amp, SP, one way , 220 Volts AC, square white mechanisms & ISI marking complete all as specified and directed.

S&F Moduler switch Modular switch 1 way 16A, 1 modules square white mechanisms ISI marking complete all as specified and directed.

S&F Moduler socket shuttered 6 Amps, 3 Pin Universal India -2 module,complete ISI marking all as specified.

S&F Moduler socket shuttered 6/16 Amps, 3 Pin Universal India -2 module, ISI marking complete all as specified and directed.

S&F Moduler Ceiling fan regulator electronic type deluxe 240 , 5 step , Volts ISI Marked complete all as specified and directed.

M&L ceiling rose, Pilot 3 Plate ceiling rose 6A, complete all as specified and directed.

S&F in replacement epoxy powder coated distribution box Double door type TPN 12 way, with 200 amps rated bus bar, 415 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door complete all as specified and directed.

S&F in replacement epoxy powder coated distribution box Double door type SPN 8 way,with 200 amps rated bus bar, 415 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door complete all as specified and directed.

S&F in replacement epoxy powder coated distribution box Double door type SPN 4 way, with 200 amps rated bus bar, 415 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electornic regulator and accessories, 230 V, 1200mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brusheshless direct current motor (BLDC), complete all as specified and directed.

S&F exhaust fan, steel body AC single phase, 230V of size 300mm sweep with blades and frame and lourvers, complete all as specified and directed.

S&F in replacement MCB SP 6 to 32 Amps C seires , 240 Volts to be housed in DBs Proper and suitable size cable lugs to be fixed with MCBs are including in unit rate of each complete all as specified and directed.

All as per item No 104 above but SPN 40 to 63 Amps, 240 Volts

M&L in replacement for sub main wiring comprising two single core, 4 Sq mm nominal cross sectional area multi on same copper conductor cable, PVC insulated FRLS Grade unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings complete (concealed type) including S&F 4 Sq mm nominal cross sectional area on same copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Note :- (i) Cutting chases and making good of disturbed surfaces shall deem to be including in the unit rate quoted by tendered. (ii) Extra length of cables/wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

S&F in replacement MCCB 415V, 16KA 4 pole ,125Amp, complete all as specified and directed.

Supply and fixing in replacement of Recess LED llight fittings of size 2X2 40 watt LED Made of CRCA powder quoted finish with Fully Covered by PMMA Acrylic Lumio Diffuser, LED Used shall be SMD type and fixture including cutting and making false ceiling of any pattern/mtrl proper fixing of light in falce ceiling , electrical connection up to 15 feet height of various ward and dept complete all as specified and directed.

Supply and fixing in replacement flexible copper cable three core suitable for connection of light fittings/ FTL fittings of any type complete all as specified and directed.

Supply and fixing LED battern with LED Tube light rod 18 watt 4 feet retro type complete all as specified and directed.

S&F in replacement gun metal globe or gate valve 'ISI marked' with iron wheel head screwed both end for iron pipe all as per latest IS specifications of the 40 mm bore sizes complete all as specified and directed .

All as item No 111 above but 20 mm bore.

Cutting in position existing steel tubing for alteration or repair including screwing/threading of 40 mm bore complete all as specified and directed .

All as item No 113 above but 50 mm bore.

Drilling &Tapping cast iron water mains in postion for branch connection of the 15 mm bore sizes complete all as specified and directed .

All as item No 115 above but 20 mm bore.

M&L for repair/repalcement of existing valve pit chamber of size 1000x1000x1000 mm (internal dimension) with and including PCC 1:2:4(using 20 mm graded stone aggregate) for foundation, fly ash brick work 1:6, 15 mm thick rendering in cm 1:6 all around, PCC 1:2:4 (using 20 mm graded stone aggregate for grouting of 40x40x5 mm angle iron frame, 4 mm thick MS sheet top cover locking arrangement with 50 mm pad lock with double key - 01 No including painting with two coat of synthetic enamel paint over a coat of red oxide primer & necessary excavation earth work, PCC plaster etc complete all as specified and directed .

Excavation in trenches n.exc. 1.5 mtr wide and n.exc. 1.5 mtr in depth for laying / taking out water supply pipe line in soft/loose soil, taking out excavated material,forming bottom etc complete all as specified and directed..

Returning filling in including,spreading ,levelling watering and well ramming in layer in n.exc 25 cm in soft/lose soil all as specified directed.

Removing excavated material n.exc 50 mtr and deposting where directed at a level n.exc. 1.5 mtr above starting point as in soft/loose soil complete all as specified and directed.

Taking down 110 mm bore PVC (SWR) pipes, complete all as specified and directed.

MAA BHAWANI CONSTRUCTION

M R CONSTRUCTION

M/s Reliable Electromech Systems

m/s raghubar dayal

M/S AMARJIT SINGH

Spectrum Enterprises