REPAIR REPLACEMENT OF LT PANELS OVERHEAD LINES AND ITS CONNECTED ITEMS AT ODF KB LINE AND MALL RAOD ETC UNDER GE EAST AGRA

Amount

Disconnecting/taking out of existing old unserviceable under ground cable any description, any size and in any position complete all as directed.

Disconnecting/taking out of existing old unserviceable LT Panels any description, any size and in any position complete all as directed.

Material and labour PCC 1:3:6 type C-1 using 20 mm graded stone aggregate complete all as specified and diredcted for foundation of taxi light/flood light fittngs/feeder pillar box etc.

Excavation in trenches in soft/loose soil N. exc 1.5 Mtr wide and not exc. 1.5 Meter deep and getting out including forming bottom surface for laying of cable complete all as specified and directed.

Returning filling including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified.

Removing surplus soil to a distance n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point all as specified.

Supplying and laying sand cushioning for cable protection in trenches /filling in ducts at Sub Stations complete all as specified and directed.

Supplying and laying bricks old size sub class ‘B’ laid flat across the cable with length of whole brick for protection of cable complete all as specified and directed.

Supply and laying connecting and testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable with aluminium conductor 1100V grade cross sectional area 95 Sq mm 3.5 core complete all as specified and directed. Make Havells/ Gloaster/Polycab

All as per above but 70 Sq mm 3.5core complete

All as per above but 50 Sq mm 4 core complete

All as per above but 25 Sq mm 4 core complete

All as per above but 16 Sq mm 2 core complete

M&L for drilling suitable dia horizontal bore holes including insertion/ laying of 80mm bore HDPE pipe of any description below/under existing road surfaces / floors at a level not less than 0.60 mtr etc with using mechanical / or manual devices as required at site including making good the disturbed surfaces to match with the existing after laying pipes complete all as specified and directed by Engineer-in-Charge. Note : (i) Cost of equipment tools and plant material (horizontal boring rig machine) required for boring shall be arranged by contractor at no extra cost to the Govt.

M & L for GI pipe light grade 50 mm dia with all fitting laid in bore holes/trenches/drain/culvert or fixed along with pole/wall including 02 Nos FI clamps of 25x3 mm including nut, bolts etc. complete all as directed. Make TATA/Jindal/ Prakash

M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burned directly in ground ( earth pit not less than 2.5 M below normal ground level ) with top edge of the plate not less than 1.75 M below normal ground level connected to and including galvanized steel Strip of size 32 x 6 mm as earth lead Earth plate to bldg test point including 40mm GI light grade pipe for earth protection from earth point to earth plate surrounded by 150mm thick alternate layers of charcoal dust mix all with 35% common salt, 20mm bore medium grade GI Pipe for watering PCC pit type 1:3:6 type C-1 using 20mm graded stone aggregate, with RCC 550mm thick cover in 1:2:4 TYPE B-1 reinforced with 8mm dia CTD bars @8mm e/c both way. GI check nut, funnel with wire mesh necessary excavation and earth work in any type of soil all as specified and shown in electrical plate No 3 of MES SSR Part I 2009.

Supply and fix cable jointing kit suitable for 1100 Volts grade LT cable for outdoor termination heat cold type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 25 to50 sqmm. Make : 3M / M-seal/ Denson/Reychem

Supply and fix cable jointing kit suitable for 1100 Volts grade LT cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 70 to 95 sqmm. Make : 3M / M-seal/ Denson/Reychem

Supplying and fixing in repair MCCB, 630 Amps, 4 pole, 415 Volts, AC supply, having breaking capacity Icu =Ics = 100% ,50 KA microprocessor withTharmal Magnetic release complete all as directed. Make Cat No 422075 of Legrand or equivalent to Schiider/ L & T

Supplying and fixing in repair MCCB, 400 Amps, 4 pole, 415 Volts, AC supply, having breaking capacity Icu =Ics = 100% , 36 KA microprocessor withTharmal Magnetic release complete all as directed. Make Cat No 422063 of Legrand or equivalent to Schiider/ L & T

Supplying and fixing in repair MCCB, 250 Amps, 4 pole, 415 Volts, AC supply, having breaking capacity Icu =Ics = 100% , 25 KA withTharmal Magnetic release complete all as directed. Make Cat No 420219 of Legrand or equivalent to Schiider/ L & T

Supplying and fixing in repair MCCB, 200 Amps, 4 pole, 415 Volts, AC supply, having breaking capacity Icu =Ics = 100% , 25 KA withTharmal Magnetic release complete all as directed. Make Cat No 420218 of Legrand or equivalent to Schiider/ L & T

Supplying and fixing in repair MCCB, 100 Amps, 4 pole, 415 Volts, AC supply, having breaking capacity Icu =Ics = 100% , 25 KA withTharmal Magnetic release complete all as directed. Make Cat No 420055 of Legrand or equivalent to Schiider/ L & T

Surface dressing in soft/loose soil not exceeding 15 cm deep and removing excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr complete all as specified and directed.

trimming/cutting/chopping of tree branches all around LT/HT over conductor upto two meter and removing excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr complete all as specified and directed.

Releasing tension of existing OH line, of ACSR/copper conductor or GI earth wire of any size/type on existing OH line restretching properly and fixing on existing insulators on OH cross arms of poles including disconnection service connection street light fitting etc and reconnecting the same after restretching complete all as specified and directed (each conductor will be measured seperately)

M&L/fix in repair for fabrication work for guarding, cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and including one primer coat of red oxide and two coats of aluminium paint, complete all as specified.Make Tata/Jindal/ Sail

Supplying, fixing, stringing in replacement of aluminum conductor steel reinforced (ACSR) including binding wire for binding to aluminum conductor properly on insulators at least 50mm on existing/ new pole over head lines, jumpring, connection and jointing and testing complete all as specified and directed.

S&F in replacement on pole factory made, dust proof, vermin proof , out door type Polycarbonate boxs incl MCB SPN 6 Amps,, SPN bus bar, insulator,GI nut, bolts and washers and aluminum lugs etc with and including FI clamp made out of 30 mmx 3 mm , nut and bolts complete all as specified and directed. Make : sintax/Hensal

S&F in replacement MS Busbar Chamber factory made of of 200 amps 4 way including electric connection ,etc with and including FI clamp made out of 50 mmx 3 mm , nut and bolts complete all as specified and directed. Make havells Cat pt No IHBC020004 OR EQUIVALANT TO LEGRAND/SCHIEDER

Balaji Associates

Allied Builders

MISHRA CONSTRUCTION COMPANY

M/S RAJENDRA KUMAR AGARWAL

AUTOMATION AND SWITCHGEAR PANELS

AUTOMATION AND SWITCHGEAR CONTROL

Jain Traders

8M/S TIWARI and SONS

ENVIRO TECH SERVICES