Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.4 LAccepted-AOC 1010 NANDANPURA BABINA CANTT DIST JHANSI 284401 | BABINA CANTT | JHANSI | UTTAR PRADESH | 284401 | L1 | Accepted-AOC Being a L1 bidder | |
| 2 | L2₹37.2 L+₹10,588.32 (0.29%)Rejected-Finance 640 MAIN ROAD BABINA CANTT JHANSI UP 284401 | JHANSI | JHANSI | UP | 284401 | L2 | Rejected-Finance Not being a
lowest
tenderer |
Tender Value
₹48.6 L
EMD Value
₹97,200
Closing Date
6 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BABINA
GE BABINA CANTT 284401
CERTAIN SPECIAL REPAIR WORKS AND MINOR WORKS IN AGE BRs AND AGE E/M UNDER GE BABINA
2022_MES_522918_1
GE/BAB/TOKEN/06 OF 2022-2023
Open Tender
Civil Works
Item Rate
184 days
GE BABINA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE BABINA
₹97,200
Yes
30 Jun 2022
10 May 2022
8 Jun 2022
10 May 2022
6 Jun 2022
25 May 2022
60 days
Amount
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth ; for foundation etc . or for shafts, wells , cesspits , manholes ,pier holes , etc. not exceeding 10 sq.m on plan and not exceeding 1.5 m in depth and getting out in any type of soils complete all as specified and directed
Surface excavation n exc 30cm deep, average15cm deep and getting out in any type of soil completer all as specified and directed
Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed.
Removing excavated soils/material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed.
M&L for Hardcore of gauge not exceeding 63 mm of broken stone or boulders deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface etc complete and as directed.
M&L for moorum under floors or paving ,laid in layers n exc 15 cm thick each spread ,levelled , watering and rammed etc complete all as specified and directed.
Demolition of brick work/stone masonary built in cement mortar of any description , any position and any location and as direcetd
M&L for brick work with Fly Ash bricks ( FASB) straight or curved on plan exc 6 M radius built in cement mortar (1 : 6) etc complete all as specified and as directed.
M&L for Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks built in Cement mortar 1:4 etc complete all as specified and directed.
Supply only water proofing compound (ISI Marked ) as directed
M&L for Cutting chasses ,pinning in and making good to facings where required and pointing /rendering in cement mortar 1:3 and cutting chasses in brick walls exc 10 cm but n exc 20 cm girth for concealed GI tubing /PVC conduit etc complete and as directed .
Cutting holes in brick walls built in cement mortar and making good dismanteled portion in CM 1:3 or PCC 1:2 :4 type B-1 as required ,exc 1/2 Bk thick wall but nexc 1 Brick thiak wall etc complete and as directed
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregates as in foundations filling , mass concrete etc complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregates as in foundations filling , mass concrete etc complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in sub base of floors etc complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregates as in surface channel /drain incl providing necessary form work etc complete all as specified and directed. Note : Cost of form work shall deemed to be included in unit rate quoted by the tenderer
M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping incl providing necessary form work etc complete and as directed.Note : Cost of form work deemed to be included in the quoted by the tenderer
M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in bed block to secure hold fast incl providing necessary form work etc complete and as directed.Note : Cost of form work deemed to be included in the quoted by the tenderer
M&L for RCC 1:1.5.3 type A-1 using 20 mm graded stone aggregates as in roof/lintel beams etc complete all as specified and directed. Note : Reinforcement shall be measured and paid seperately
M&L for RCC RCC 1:1.5.3 type A-1 using 20 mm graded stone aggregates as in slab supported on walls /columns/beams etc complete all as specified and directed. Note : Reinforcement shall be measured and paid seperately
M&L for precast RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregates) as in lintel upto 1.50 mtr clear span etc complete all as specified and directed. Note : Reinforcement shall be measured and paid seperately
M&L for precast RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregates) as in cover slab of man holes and set in CM 1:4 etc complete all as specified and directed. Note : Reinforcement shall be measured and paid seperately
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but not exc 4 Sqm each etc complete all as specified and as directed.
Dismantling of timber scantling 40 Sqcm and over in section fixed in any position as framed work complete all as specified and directed
S&F, 2nd class hard wood ( SAL ) plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,supplied and fixed etc complete all as specified and as directed.
S&F, Pressed steel frames for doors(125x60) mm using 1.25 mm thick mild steel sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete incl providing PCC 1:3:6 Type C-1 using 20 mm graded stone aggregates as in hollow portion of frame and 1 No - 10 mm dia deformed bar at bottom to brace the frams and incl providing Mild steel cold rolled butt hinges 100 mm size-6 Nos etc complete all as specified and directed . Note : The cost of PCC ,bottem bar 10 mm dia ,M S hinges ( 6 Nos ) deemed to be included in unit rate quoted by the tenderer.
S&F, Pressed steel frames for doors(105x60) mm using 1.25 mm thick mild steel sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete incl providing PCC 1:3:6 Type C-1 using 20 mm graded stone aggregates as in hollow portion of frame and 1 No - 10 mm dia deformed bar at bottom to brace the frams and incl providing Mild steel cold rolled butt hinges 100 mm size-3 Nos etc complete all as specified and directed . Note : The cost of PCC ,bottem bar 10 mm dia ,M S hinges ( 3 Nos ) deemed to be included in unit rate quoted by the tenderer.
S&F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as per specification, drawing and colour etc complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification & drawing etc complete all as specified and as directed.
S&F, FACTORY MADE 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.24 (a), divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed.
S&F 30 mm thick, flush shutter , FACTORY MADE solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm for PVC doors etc complete all as specified and as directed.
S&F, aluminum anodized barrel tower bolts of extruded section 200 mm long etc complete all as specified and as directed
S&F, aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed
S&F, aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) 300 mm long , not less than 12 mm dia bolt with a minimum of 6 nos bolts and nuts on bolt plate and 2 nos on staple plate and fixed etc complete all as specified and as directed
S&F galvanised mild steel wire clothe with 0.63 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed
S&F aluminium Hasp and staple ,safety type bras with mild steel hinge pin incl bolt to hinge plate and fixed etc complete all as specified and as directed
S&F Knob 40 mm dia , Brass for cup board shutter fixed with nut ,screws etc complete and as directed.
S&F Continuous (piano) hinges, mild steel bright finish electrogalvanised 35mm width of flap etc complete all as specified and as directed.
S&F in repair stainless steel curtain rod of 25 mm dia pipe quality H-304 etc complete and as directed . Make : Jindal/TATA/Apollo Steel pipes
S&F in repair stainless steel brackets , Fancy type suitable for 25 mm dia curtain rod complete and as directed
S& stainless steel End Knob ,round suitable for curtain rod 25mm dia and as directed
S&F Aluminium peg set of 5 fixed on 2nd class hard wood board of size 600 mm x 300mm x20 mm thick covered with 4 mm thick commercial plywood duly finished with ready mix polish of Berger/Asian paints/Shalimat Paints and fixed on wall with rawl plug and screws etc complete and as directed.
S&F powder coated aluminium frame for door or window using section size minimum 100 x 44 mm x 1.60 mm thick fixed in position with the help of steel screws and patent rawl plug etc complete and as directed .
S&F steel window with Z section, side hung shutters including box type hinges with steel handles, and steel peg stay complete with glazing bars, dovetailed or welded incl taking down existing window of any description all as specified and directed.
S&F steel window with Z section, side hung shutters including box type hinges with steel handles, and steel peg stay complete without glazing bars, dovetailed or welded incl taking down existing window of any description all as specified and directed.
S&F steel ventilator with side hung shutter with steel handle and peg stay and with glazing bars incl glazing bars etc complete all as specified and directed.
S&F steel ventilator with side hung shutter with steel handle and peg stay and without glazing bars incl glazing bars etc complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilivers, shelves including supports, overhangs, etc. also splays between floors and beams, etc Fair finished surface of concrete ,flat etc complete all as specified and directed
Use and waste of form work to side & soffits of suspended slab supported on wall, fair finish surface , for thickness n exc 200mm etc complete all as specified and directed
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20cm wide and sides of RCC/PCC bands in walls, horizontal or slopping and similar work exceeding 10cm but not exceeding 20cm wide. Fair finished surfaces of concrete
M&L for mild steel TMT bars 10 mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed . Make : As specified in tender documents
M&L for mild steel TMT bars 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed . Make : As specified in tender documents
S & F Roof trusses (framed ) , trussed purlins , crane gantries , rails and fastenings and heavy bracket framing (Beam , tee , angle ,channel or flat sections) including distance pices ,cleats etc. Of grade Fe - 410-W (Gde-E-250) quality "A"etc complete all as specified and directed . Make : As specified in tender documents
M&L for mild steel plates, plain or chequered, Fe-290 Gde E-165, 5 mm thick or over in thickness in available sizes all as specified and directed.
M&L for screw bolt machine made with hexagonal head at one end and other end screwed and grouted in RCC /PCC including nut ,washers anddia of bolt not less than 16 mm and length not less than 250 mm long etc complete and as directed.
Supply , fabrication and fixing mild steel work Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete and as directed Make : As specified in tender documents
S & F 9-9.5 mm thick gypsum board tiles laminated with white PVC film on face side & metalized polyster film (Aluminium foil) on the back side with all four edges sealed with PVC film of size 600 x600 mm fixed with clips & screws incl anodised aluminium snap grid frame work for false ceiling of Tee /Angle of weight n less than 300 gm /Rm with slot for fixing incl necessary suspender of flat iron 25x 3mm thick or 4 mm dia bars of required length fixed to purlins of roof not exc 1.20 mtr both ways incl all accessories as required for suspending the ceiling work and inclusive of gypsum board etc complete and as directed Make:Polyshield-P (Plain) of M/S SaintGobain Gyproc India Ltd / Daiken gypsum tile of M/S Lucky Global Corporation Co. Ltd of suitable size as directed.
S & F wall panelling of teak wood veeneered with melamine polish finish on 18 mm thick plywood fixed on 2nd class hard frame work , the size of runner 50 mm x 20 mm thick fixed on walls with wooden gutties and steel screws etc complete and as directed
M&L for 2nd class hard plain fillets , rectangular in section ,clean sawn secrewed with nails , sectional area exc 13 sqcm but n exc 25 sqcm etc and finished with ready mixed polish of approved make to match the panelling etc complete and as directed
M&L for 18/19 mm cover fillet of external teak wood lipping 6 mm thick fixed with nails etc complete and as directed
Dismantling of wall ,ceiling board ( fibre,pulp,insulation etc ) or insulation boards/slabs/blankets any thicknes incl cover fillets as directed.
M&L for snap grid ( 600 x600 mm ) ceiling using aluminium anodised sections ie Main Tee section of 36.5x25x1.4mm size (wt not less than 0.24Kg/RM) , Wall angle of size 40x25x2mm size (wt not less than 0.36Kg/RM) , Cross Tee section 23.5x26.4x1.4mm size (wt not less than 0.191Kg/RM) and Snap grid shall be fixed to ceiling by supporting hangers consisting of 6 mm dia mild steel bar made to shape including providing mild steel flat iron cleat with 40x3 mm and fixed with expansion dash fastener n exc 1.20 mtr both ways fixed to roof etc complete all as directed.
M&L for 12 mm thick perforated partical board /tiles for insulation or accoustic purpose , the size of tile 600 mm x600 mm fixed in snap frid ceiling frame work etc complete all as specified and directed
S&F 19/20 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work etc complete all as specified and as directed.
M&L for 12 mm thick commercial plywood BWR grade type BB fixed with screws to timber frame work etc complete and as directed
Dismantling asbestos cement , galvalume , fibre sheet ( Plain , corrugated , semi corrugated ) and as direcetd
S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/wall clading fixed with self tapping screws and as directed .
Taking out /Dismantling of existing roof treatment of any description , any position over roof including taking out plain cement concrete of any description to the thckness as directed etc complete and including lowering down complete waste materials to the ground on a place where directed and including removal of the same to a distance exc 250 mtr but n exc 500 mtr as directed .Note : The cost of lowering down and removal deemed included in unit rtae quoted by the tenderer.
M&L for P.C.C 1:2:4 type B-1 using 20 mm graded stone aggregate as in padding laid to slope over roof and surface finished even and fair etc complete all as specified and as directed. Note : The thickness of PCC shall not be exceeded more than 75 mm at any place
M&L for cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove sealed with cement mortar 1:3 complete and as directed.
Roughening of existing surfaces of roof by picking ,sweeping clean and washing down with water to remove dust etc and applying neat cement slurrry @ 3 Kg per sqm etc as directed
M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping on parapet walls / roof kerbs on roof / benching , chamfered on edge including troweling slightly complete all as specified and as directed. Note: The cost of form work deemed to be included in the unit quoted rate by the tenderer
M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is still green including mixing of water proofing compound as per manufacturer instruction, surface finished even and fair enough to receive water proofing traetment etc complete all as specified and as directed.
M&L for providing water proofing treatment over roof by applying the following operations :- (a) Preparation of plastered surface by cleaning with water and leave the sufaces till to become surface total dry . (b) Applying first coat of bitumen primer conforming to IS-3384 @ 0.4Kg / Sqm on plastered surface (c) Applying APP based polymeric membrane 3mm thick (Minimum thickness) and weight not less than 3kg/Sqm , reinforced with polyester non woven fabric (wt not less than 160 gms/sqm) over on primed surface laid with 100mm side lap/end lap on prepared surfaces as per manufacturers instructions and under strict supervision of manufacturer's tenchnical representative etc complete and as directed. Note : The cost of casting one cement plate of size 600 mm x 450 mm in 10 mm thick rendering in CM 1:3 and writing materials as per notes given in Schedule 'A' notes shall deemed to be included in the unit rate by the tenderer. Make of APP Membrane : M/S IWL INDIA LTD , C&D LAKSHMI BHAWAN,609 ANNA SALAI CHENNAI /SHIVAM TAR PRODUCT/ PIDILITE ( DR FIXIT TORCH SHIELD / SUPREME BITUCHEM INDIA PVT LTD NAGPUR/M/S SHALIMAR TAR PRODUCTS STP HOUSE 570 PHASE V UDYOG VIHAR GURGAON /M/S TIKKI TAR DONASA ( INDIA) PVT LTD VILL ROAD BHANDUP (W) MUMBAI/ M/S TEXLA INDIA LTD Make of Bitumen: ISI Marked bearing IS-702 Make of bitumin primer : ISI Marked bearing IS-3384
S&F 3 mm thick plain sheet glass ordinary quality , glazing with wooden beads or oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as dirrected.
S&F 3 mm thick figured glass ,pin headed , glazing with wooden beads or oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as dirrected.
M&L for 75 mm thick P.C.C 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection laid in alternate panels made of 10 mm thick plywood ( Size of each panel shall not exceed 12 Sqm ) and finish the surface even and smooth without using extra cement including filling of joint with bitumen mastic ( 1 part bitumen mixed with 3 part dry sand) etc complete all as specified and as directed. Note : Cost of form work for forming joints and jointing materials deemed to be included in unit rate quoted by the tenderer.
Dismantling floor/hearth or wall tiling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectengular) DARK ( Premium Quality ) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 over 25 mm thick PCC in 1:2:4 type B-0 using 12.5 mm graded stone aggregates etc complete all as specied and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectengular) DARK ( Premium Quality ) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 etc complete all as specied and directed.
M&Lfor glazed ceramic coloured tiles DARK ( Premium Quality ) size 300x600 mm x 8-9 mm thick over 10 mm thick rendering in cement mortar 1:4 in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed .
M&Lfor glazed ceramic coloured tiles DARK ( Premium Quality ) size 450x350 mm x 8-9 mm thick over 10 mm thick rendering in cement mortar 1:4 in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed .
M&Lfor glazed ceramic coloured tiles DARK ( Premium Quality ) size exc .11 but n exc .18 sqm each x 8-9 mm thick over 10 mm thick rendering in cement mortar 1:4 in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed .
M&L for glazed ceramic coloured tiles DARK ( Premium Quality ) size 300x200 mm x 6-7 mm thick over 10 mm thick rendering in cement mortar 1:4 in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed .
M&L for 20mm thick Granite stone slab, Z Black ( SOUTH BLACK ) , machine cut , well polished in single piece laid/ bedded in 20 mm thick screed bed in CM 1:4 as in cooking plaforms , vertical surfaces & like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing etc. complete all as specified and directed.
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete all as specified.
M & L for 10 mm thick rendering in cement mortar 1: 6 on fair faces of brick work /concrete surfaces , suface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for 15 mm thick rendering in cement mortar 1: 6 on other than fair faces of brick work surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for 15 mm thick rendering in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for 15 mm thick rendering in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for 5 mm thick rendering in cement mortar 1: 3 on fair faces of concrete surfaces ,surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of primer over a coat of putty ( Birla/JK white/Berger) on walls all as specified and directed.
M & L for preparation of newly plastered surfaces of walls and applying two coat of cement based paint over a coat of primer over a coat of putty ( Birla/JK white/Berger) on walls all as specified and directed.
M & L for complete removal of existing treatment of any description from walls and appying two coat of oil bound distemper over a coat of primer including necessary prepration of surfaces as per manufacurers instructions etc complete all as specified and as directed.
M & L for complete removal of existing treatment from walls and appying two coat of cement base paint over a coat of alkali resistant primer including necessary prepration of surface complete all as specified and as directed.
M & L for complete removal of existing treatment of any description from walls and appying two coat of oil bound distemper over a coat of primer over a coat of wall care putty ( Birla /JK White /Berger ) including necessary prepration of surfaces as per manufacurers instructions etc complete all as specified and as directed.
M & L for complete removal of existing treatment from walls and appying two coat of cement base paint over a coat of primer over a coat of wall care putty ( Birla /JK White /Berger )including necessary prepration of surface complete all as specified and as directed.
M & L for preparing surfaces of walls of any description and applying two coats of white wash etc complete all as specified and as directed.
M & L for preparing old surfaces of walls of any description and applying one coat of white wash etc complete all as specified and as directed.
M & L for preparing surfaces of ceiling of any description and applying two coats of white wash etc complete all as specified and as directed.
M & L for preparing old decorated surfaces of ceiling of any description and applying one coat of white wash etc complete all as specified and as directed.
M&L for preparing new surfaces of wood or wood based of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paints over one coat of pink primer all as specified.
M&L for preparing new surfaces of steel of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paints over one coat of red oxide primer all as specified.
M&L for preparing old surfaces of steel of any description, over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint etc complete all as specified and as directed .
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, 110 mm bore ,fixed on walls with flat iron clamp of 25x3 mm incl nut and bolt etc complete and as directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or on floors 110 mm bore etc complete and as directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, 75 mm bore ,fixed on walls with flat iron clamp of 25x3 mm incl nut and bolt etc complete and as directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or on floors 75 mm bore etc complete and as directed.
S&F PVC (SWR) bends any radius 110 mm bore etc complete all as specified and directed
S&F PVC (SWR) bends any radius 75 mm bore etc complete all as specified and directed
S&F PVC floor trap size 75mm dia out let with grating including connection to waste pipe with solvent cement jointing etc complete all as specified and directed
S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door etc complete all as specified and directed .
S&F PVC (SWR) junction single, (single T) equal or unequal 75 mm bore with access door etc completeall as specified and directed .
S&F PVC (SWR) vent cowl 110 mm bore etec complete all as specified and directed
S&F in repair cast iron floor trap size 75mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed
Taking up or down existing steel tubing and connections including cleaning for refixing etc complete all as specified and as directed for 15 mm bore
Taking up or down existing steel tubing and connections including cleaning for refixing etc complete all as specified and as directed for 20 mm bore
Supplying, fixing, jointing and testing 15 mm dia galvanised iron tubing medium grade ISI Marked with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed
Supplying, fixing, jointing and testing 20 mm dia galvanised iron tubing medium grade ISI Marked with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed
Supplying, fixing, jointing and testing 15 mm dia galvanised iron tubing medium grade ISI Marked with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed
Refixing only 15 mm dia galvanised iron tubing medium grade obtained from taking down including necessary cleaning incl providing new all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed
Refixing only 20 mm dia galvanised iron tubing medium grade obtained from taking down including necessary cleaning incl providing new all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed
S & F ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe 20 mm dia and fixed in new tank (minimum weight 20mm 210 gm) complete all as specified.
S&F 20 mm gun metal gate valve ( ISI Marked ) with iron wheel head screwed both ends for iron pipe etc complete as directed.
S&F Vitreous china squatting pan, 'orissa' pattern, size 580 x 440 mm white, with integral footrest (excluding flushing cistern and flush pipe) including provision of concrete beddig and joint to flush pipe to squatt pattern closet including all joints and making good to the floor and taking down old one complete all as specified and as directed.
S & F 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.
S&F vitreous china wash hand basin, white flat back, size 550x400mm incl CI bracket and 32mm dia brass CP waste coupling and including fixing of tap ,waste fitting and union complete all as specified and as directed .
S&F 15mm bore FANCY type chromium plated bib cock with AERATOR , long body with wall flange etc complete all as specified and as directed
S&F in repair 15mm bore FANCY type chromium plated bib cock with AERATOR , long body with wall flange etc complete all as specified and as directed
S&F 15mm bore angle cock with wall flange , one way with wall Flange cast copper alloy , CP , Fancy , concealed type , screwed down high pressure with crutch or butterfly handle screwed both ends fixed to GI tubing/fitting etc complete all as specified and as directed.
S&F in repair 15mm bore angle cock with wall flange , one way with wall Flange cast copper alloy , CP , Fancy , concealed type , screwed down high pressure with crutch or butterfly handle screwed both ends fixed to GI tubing/fitting etc complete all as specified and as directed.
S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F Shower rose brass chromium plated , 125 mm size with tilting arm 200 mm long FANCY type including fixing to steel pipe or union complete all as specified and as directed.
S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60 Cm long between flanges etc complete all as specified and directed.
S&F soap dish cast copper alloy CP wall on walls with rawl plud and screws complete all as specified and as directed.
S&F stainless steel kitchen rack plate rack over all size 900mmx900mm make out of 1.00 mm thick stainless steel sheet complete all as specified and as directed. Make : ANJALI, BLUE STAR ,PARRYWARE
S&F in replacement Stainless steel sink with drainage board made of 1.00 mm thick steel sheet for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm etc fixed complete. Make : Nirali/ Diamond/Neel kanth/ Blue star
S&F PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed .
S&F waste pipe LDPE , length minimum 650 mm suitable for wash hand basin with cap etc complete all as specified and as directed .
Demolition and breaking drain pipe ( SGSW/SWR/AC ) set in cement mortar ,cement solvant or by any other means including packing under and haunching against side of pipe for 200 mm Internal dia of pipe
M&L 150 mm dia (internal) SGSW pipes Gde ‘A’ quality laid in trenches jointed in CM 1:2 and tested after the pipes are laid jointed complete all as specified and directed
M&L 100 mm dia (internal) SGSW pipes Gde ‘A’ quality laid in trenches jointed in CM 1:2 and tested after the pipes are laid jointed complete all as specified and directed
M&L for concrete bed in PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 150 mm dia (internal) of SGSW pipes complete all as specified and directed. [Note: SWSG Pipes shall be measured & paid separately].
M&L for concrete bed in PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 100 mm dia (internal) of SGSW pipes complete all as specified and directed. [Note: SWSG Pipes shall be measured & paid separately].
M&L for machine pressed precast concrete interlocking paver block of shape as approved and size confirming to IS-15658-2006 , M-35 grdae , of 60mm thickness with grey cement and red pigment laid over 50mm sand cusion etc complete as directed . Note : The cost of sand deemed to be inclusive in the unit rate quoted by the tenderer.
Taking down carefully aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power point ) complete , including taking out fixtures and fittings such as switches , ceiling roses, pendents, regulators ,sockets,light fitting etc removing materials to store for keeping in safe custudy or for taking credit ( as per schedule of credit for dismantled/taken out items ) and making good the disturbed surfaces of walls, floors, ceilings etc and as directed .
Taking down carefully existing wooden board , Main switch, MCB DB boxes, TPN boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.
Taking down carefully sub main wiring with any cable / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.
M & L for CONCEALED point wiring one light point controlled by one switch with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 1.5 Sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including non metelic rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.6 mm thick) including earth dolly with frame plates with matching cover plates all modules including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed .NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the conduit to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size as directed fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick ISI marked hylam sheet/ backlite sheet cover fixed with suitable brass screws and cup washers .
All as per Srl item No. 155 above but one fan point controlled by one switch & regulator.
All as per Srl item No.155 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.
All as per Srl item No.155 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.
Description all as per item No .155 above but for power point wiring using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke(FRLS) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed.
S & F modular switch 1 way , 6 Amp , 1 module complete all as specified and as directed.
S & F modular socket outlet 6 A , 2/3 combined , 2 module etc complete all as specified and as directed.
S & F modular switch 1 way ,16 Amp, 1 module complete all as specified and as directed.
S & F modular socket outlet 6/16 Amp combined 2 modules etc complete all as specified and as directed.
S & F modular fan Regulator electronic ratary step type 240 volt 50 Hz complete all as specified as directed.
S & F switch Piano push button type 5 Amp, single pole complete all as specified and as directed.
S & F socket outlet 5 A , 2 in 1 , 3 pin flush type etc complete all as specified and as directed.
S & F switch flush button type 15 Amp, single pole one way complete all as specified and as directed.
S & F socket outlet 2 in 1 , 3 pin 5 Amp and 15 Amp flush type etc complete all as specified and as directed.
S & F delux fan Regulator , electronic rotary type, 5 step , 230/240 Volts , 80/100W etc complete and directed
S & F Lamp holder,PVC/Urea type with back plate ,AC ,230 Volts ,50 Hz , ISI marked suitable for batten fittings complete all as specified as directed
S&F ceiling rose,surface bakelite 65 x50mm three brass terminals, AC ,230 Volts ,50 Hz ISI marked complete all as specified and as directed.
S & F 9/10W LED retrofit Ball lamp holder base B-22, bipin type AC 230 Volts 50 Hz with PF not less than 0.95 with polycorbonate body and aluminium heat sink complete all as specified as directed.
Supply, fixing, connecting & testing of sheet metal enclosures single pole and neutral with a two pin earth plug and socket complete with 1 no MCB , 20 Amp , SP etc complete all as specified and directed.
S&F MCB single pole 6 to 32 Amps 240 V,10KA, 'B' series,complete all as specified and as directed with copper lugs.
S&F MCB , SPN , 40 Amp 240 V ,10KA ,'C' series,complete all as specified and as directed with copper lugs.
S&F MCB , SPN , 63 Amp 240 V ,10KA ,'C' series,complete all as specified and as directed with copper lugs.
S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 4 ways 240 V complete all as specified and as directed.
S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 8 ways 240 V complete all as specified and as directed.
S&F for sub main wiring with PVC insulated, unsheathed flame retardant Low Smoke(FRLS) 2 single core cable 1100 volts grade with copper conductor of size 10 sq mm (Nominal area) multi stranded drawn into new non rigid metellic PVC conduit with and including 6 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: Two run of single core PVC cable with one run of earth conductor cable and conduit shall be measured as one unit. (ii)Cost of new PVC conduit including conduit accossories shall be deemed to be included in unit rate quoted by the tenderer .
S&F in repair 20 W LED 6000k decorative ultra slim linear LED fitting fixture with extruded polycarbonate , environmental friendly, energy efficient ,integrated driver and 20 W lamp fitted incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed.
S&F 36 W 2X2 LED Ultra mordern recess mounting luminaire cool white suitable for armstrong/ grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing ceiling rose etc complete and as directed.
S&F 24 W 2X2 LED Ultra mordern recess mounting luminaire cool white suitable for armstrong/ grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing ceiling rose etc complete and as directed.
S & F 12 Watt,4000k LED recess mounted BLAZE ROUND downlighter , cool white colour with al. Extrusion square ring & MS powder coated white housing and separate replaceable electronic driver complete as specified and as directed.
S & F in replacement decorative wall light fixture made of polycarbonate including LED bulb 9/10 Watt , gold finish fixture etc complete all as specified and directed
S&F celling fan 1200mm sweep complete AC, single phases 230/240volts star rating connecting with flexible cable 3 core copper conductor of size 23.0/0076 of suitable length from celling rose complete all necessary arrangement of hanging of celling fan (GI Pipe hook etc) as specified and as directed.
S & F Exhaust fan, AC , singe phase , 230/240 Volts , 300 mm sweep , noiseless , steel body (rust proof ) with frame and louvers etc complete with all arrangement of making hole complete all as specified and as directed.
S&F LED security light fitting 1 X 36 W LED with pressure die cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection etc complete suitable for 32 mm dia tubing including 32 mm dia light grade pipe bracket, bend to shape 1.80 mtr length with two nos clamp of size 50mm x 6 mm with nut, bolts, washers etc including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and as directed.
Supplying ,laying & testing in replacement XLPE insulated screened PVC bedded armoured with galvanised steel wire or tape , electric cable 1100 volt grade , heavy duty with aluminium conductor of size 16 sqmm x 2 C incl taking down old unserviceable cable etc complete all as directed.
Excavation in trenches in any type of soil not exe 1.5 mtrs wide and not exe 1.5 mtr in depth for laying of pipe/cables etc and getting out incl forming bottom surface to the required level/slope etc complete all as specified and directed .
M&L for dry clean sand free from sharp materials for cushioning laid in trenches in layers for under ground electric cable complete all as specified and directed
Supplying and laying precast concrete cable cover class LV type -I flat size 250x150x40 mm laid parpendicular to the axis of cable in trenches etc complete as directed.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weight n less than 17.25 kgs buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT I ( 2009) with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
M/s Ravi Traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .