Repair and Renovation of Kothi No 2 BML Colony Patiala.

Amount

Dismantling cement conglomerate floors (25mm to 50mm) thick including concrete base.

Dismantling cement conglomerate floors (25mm to 50mm) thick without concrete base.

Dismentling glazed wall tiles

Dismentling Brick work in cement

Dismentling of RCC

Scraping Cement plaster

20mm thick cement plaster 14.

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.

Scraping White wash and colour wash etc.

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish.

Applying Priming coat with cement primer in all shades on newly plastered or conc surface

Wall painting with plastic emulsion paint of approved brand to give an even shade 2 coats

Finishing walls with acralic smooth exterior paint of reqdshade with 2 or more coatsapplied @ 1.67kg/10sqm over and incl. base coat of water proofing cement paint @ 2.20kg/10sqm

P & applying Anti termite treatment using post constructional chemical treatment using chemical containg choloropyrifos systemic insecticide diluted & injecting with chemical solution treatment using chemical containg choloropyrifos systemic insecticide diluted & injecting with chemical solution

Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine sand filling using mechanical mixer for mixing of material

Providing a vitrified floor tiles 600x600mm size premium quality, manufactured using Double charge Technology, with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades,

Grouting the joints of flooring tiles having joints of 3mm width, using Epoxy grout mix of 0.70 kg oforganic coated filler of desired shade 0.10kg of hardener and 0.20 kg of resin incl filling and finishing complete.

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Black Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps

Extra cost for projected nosing of any shape and design

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Reinforced cement cocrete M-20 mechanically batch mixed using Batch type concrete mixer and vibrated by needle vibrator but excluding steel reinforcement, centering and shuttering in superstructure.

Cold twisted deformed (ribbed/ tor steel) Bars Fe 500 grade, for R.C.C. works where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete.

Stripping & stacking tiles of roof

Dismentelling brick or flagged stone flooring without conc base

e/w excavation with kassi work undressed invovolving horizontal throw & vertival lift incl. breaking of clods

Scrapping mud plaster

washing conc. surface scrubbing with brushes incl. preparing & laying slurry

Nicking cement concrete surface (over 28 days old incl preparing and laying slurry

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.

Cement concrete 1:2:4 gola 10 cm x 10 cm quardrant type

Making Top khurra 0.6x0.6m for rain water pipe in 25mm th cement cion 1:2:4 over 50mmth cement conc 1:8:16

Providing and fixing 110mm dia UPVC Rain water pipes incl jointing complete

Providing and fixing 110mm dia UPVC Bend for Rain water pipes incl jointing complete

Providing and fixing 110mm dia UPVC coupling/sockets for Rain water pipes incl jointing complete

Providing & fixing MS clamps for Rain water pipes

Dismentelling/Removing door windows with chowkhats by making access in walls door + almiras & cup boards

Dismentelling/Removing door windows with chowkhats by making access in walls window

Dismentelling/Removing door windows with chowkhats by making access in walls celestory window/ventilator

Dismentelling wire gauge with frame work

Fixing chowkhats in existing opening including embending chowkhats in floor or walls, cutting masonry & fixing hold fasts in cement concrete 1:3:6, painting two coats of coal tar to sides of chowkhats and making good the damages to walls and floors complete to match the existing surface :- for door chowkhats

Fixing chowkhats in existing opening including embending chowkhats in floor or walls, cutting masonry & fixing hold fasts in cement concrete 1:3:6, painting two coats of coal tar to sides of chowkhats and making good the damages to walls and floors complete to match the existing surface :- for window chowkhats

Fixing chowkhats in existing opening including embending chowkhats in floor or walls, cutting masonry & fixing hold fasts in cement concrete 1:3:6, painting two coats of coal tar to sides of chowkhats and making good the damages to walls and floors complete to match the existing surface :- for clerestory window (vents)

kapoor Sal wood chowkats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position double rebate

kapoor Sal wood chowkats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position single rebate

Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. 35 mm thick panneled , glazed or panneled

Wire gauge Door shutters with Kail wood without springs housed in chowkhats ( 3052+5.35%)=3215.28

Wire gauge fixed on chowkats with 25 mm thick with 25 mm th champ (assam) wood cover moulding of full width

Providing and fixing beading Mtr to door and windows chowkats of commercial hard wood, such as Hollock, Champ, Chirassy Chaplash etc (Non coniferous timber other than teak conforming to ISI specification no 100, kiln seasoned) with iron screws, fixed in position complete as per design and shape requireds.Size 50x12mm

Stainless steel pipes for window grills:-(b) 22.22mm outerdia pipe

Providing and fixing commercial plywood 12 mm thick

Providing and fixing commercial plywood 18mm thick

Providing and fixing commercial plywood 25mm thick

Providing & Fixing 6" stainless steel handles ISI marked on doors & window frames complete in all respect as per the directions of engineer in charge

Providing & Fixing 1'-3" stainless steel handles ISI marked on doors & window frames complete in all respect as per the directions of engineer in charge

Providing & Fixing 0'-6" stainless steel tower bolts ISI marked on doors & window frames complete in all respect as per the directions of engineer in charge

Providing & Fixing 12" stainless steel tower bolts ISI marked on doors & window frames complete in all respect as per the directions of engineer in charge

Providing & fixing Stainless steel ball bearing hinges of size 100x 89 x 3mm ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Iron gratted doors,incl pintle hinges and arrangments

Fixed glass panes 5mm thick

Extra cost for alluminium fittigs such as tower bolts, handles, stoppers, screws etc

Sliding bolts 300x16mm

brass 100mm mortice latch and lock with 6 levers and handles

Hydralic door closer

Curtain rods 25mm dia

Brass cup board locks

stainless steel ball bearing hinges

Providing &Fixing 0.5mm th aluminium sheet

Double action spring hinges

Prepration of plywood surface for painting incl sand papering

Applying pink primer on wood work

Painting 2coats with synethetic enemal paint

CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-inCharge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge24-02-2025-Providing and fixing CPVC pipe CPVC SDR 11 Pipe and fittings 25mm o/d

CPVC SDR 11 Pipe and fittings 40mm o/d

P/F brass ball walve 25mm dia

P/F brass ball walve 40mm dia

P/F and jointing Union Coupling in GI pipes lines 25mm dia

P/F and jointing Union Coupling in GI pipes lines 40mm dia

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition.

Const of IC 450x 600mm with cover & frame

Const of GT'S 300x300mm with cover & frame

P/F Man hole cover & frame a I 560mm i/d RCC man hole cover & frame

p/l UPVC pipes 160 mm o/d

Const.of bk masonary Man hole (b) inside size 90x150cm and 120cm deep

Making connection of sewer line with existing man hole( a) for pipes 100 to 250 mm dia

Providing and fixing in position vitreous china ware white lavatory suits of approved make including brasstuds without CP fittings:- size 630mmx500mm

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect.:-Table top size 49x40x15

P/F C P brass sink mixer with swinging spout wall mounted.

Providing and fixing P.V.C Waste PipeCollapsiable 32mm complete in all respect

Providing and fixing divertors of appd make for bath shower system complete in all respects single lever concealed divertor for bath and shower system.

Providing and fixing in position Chinaware Floor mounted European type one pieceEWC with matching cistern with P or S trap (to the approval of the Engineer-in-charge) with seat cover complete in all respect and to the entire satisfaction of engineer in charge. b floor mounted EWCsize 69x36x74 cm

Extra for P/Fixing PVC accessory fittings in chinaware cistern

Providing and fixing jet spray with 2'-6" long PVC pipe.

P/F in position 5 mm thick bevelled edge of superior glass mirror 4mm thick hard board backing of required shape complete in all respects (a)size 600mm x 450mm

P/F in position 5 mm thick bevelled edge of superior glass mirror 4mm thick hard board backing of required shape complete in all respects © size 1500x600 or any other size

Providing & Fixing in postion 15 mm i/d bib cock of best quality (as approved by the Engineer-in-charge).

Providing & fixing in position best Indian make PVC flexible tube connection. B PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut

Providing & Fixing in position C.P. Brass flange under various fixtures complete in all respects (as required by the Engineer-in- Charge)

Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-in-charge).

Providing and fixing in position best Indian make C.P brass basin mixer complete instead of piller tap.

Providing and fixing in position gratings 150mm x 150mm for gully trap.

Providing and fixing in position premium range C P brass fittings and accessories of approved make complete in all respects. C P brass towel brack 010 mm long with hangers

Providing and fixing in position best Indian make over head shower 1 flow with shower arm 15 or i/d Inlet of approved make complete in all respects.

Providing and fixing in position best Indian make soap dish fixed into wall with rawl plugs and C.P brass screws and complete in all respects .

Providing and fixing in position towel rails / ring fixed in with rawl plugs embedded in walls with brass screws, complete in all respects including cutting and making good the walls etc.

Providing and fixing in position premium range C P brass fittings and accessories of approved make complete in all respects. C P brass toilet paper holder

Providing and fixing in position SWR UPVC soil waste vent pipe or anti syphonage pipe 110 mm OD laid complete.

Providing and fixing in position HCI specials for soil waste vent or anti syphonage pipe to specifications HR Bend .

cement concrete 1:2:4 with stone aggregate 20 mm size.

Providing and fixing CP brass extension piece 25mm to 50mm long of approved make complete.

Providing and fixing in position Acrylic liquid Soap container

Floor Trap 110mm dia

Providing and fixing in position Health Faucet ( hand shower)

providing and placing HDPE water storage tank

GI Tank nipple:-25mm dia GI tank nipple

GI Tank nipple:-40mm dia GI tank nipple

Plastic ball cock with rod & plastic ball

CP Brass acrylic shelf size 560x130

Providing & fixing in position stainless steel rectangular sink with deluxe border Double bowl overall size1330mmx515mmand bowl size560x410x200mm of approved make with waste coupling complete. Double bowl sink

Providing & fixing in position CP brass sink mixer

Wiring fan point (Without fan box)

Wiring light point

wiring call bell point

Wiring 3 pin 6Amp. wall socket point

Wiring 3 pin 6Amp. power plug control wall socket point

Wiring 3 pin 16/20Amp. power plug control point

Wiring light point with double control switches.

Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-:-Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 1.0 sq.mm (Un-sheathed)

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-:-Overall size 1.5 sq.mm (Un-sheathed)

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-Overall size 4.0 sq.mm (Un-sheathed)

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (Un-sheathed)

Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (50/0.25mm), 2Core

Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4.0 sq.mm (84/0.25mm), 2Core

Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:-Heavy Gauge PVC Conduit Pipe 25mm dia. (flushed)

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications includingconnections with suitable size of thimbles/lugs:-MCB single pole Pole 6-32amp. (10kA, Curve-C)

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications includingconnections with suitable size of thimbles/lugs:-MCB Double Pole 6-32amp.(10kA, CurveC)

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications includingconnections with suitable size of thimbles/lugs:-MCB Double pole Pole 40amp. (10kA, Curve-C)

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-MCB Double pole Pole 50,63amp. (10kA, Curve-C)

Supply and erection of RCBO (Residual Current Breaker Overload) for Earth leakage, overload and short circuit protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61009 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-RCBO Four Pole 32amp., Sensitivity 30mA

Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars,earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-TP&N Double Door Distribution Board 12 way each

Erection of 1X20/28/36/40W Box Type (LED/ Fluorescent) light fixture ( Labour rate only)

Supply and erection of G.I. Each 18,651.16 pipe ‘A’ quality of suitable length and dia. confirming to IS:1239 (Part-I) 1979, including fixing up to a given depth below G/L, the hole of excavation about 30cm dia. and given depth to be filled in up to 15cm below G/L with 1:2:4 cement concrete including painting of pole with two coats of approved aluminium paint as required: -:-G.I. Pipe Pole 6.1 metre Long, Dia. 80mm, Planting Depth 120cm with Pit Depth135cm.

Supply and erection of G.I. Pipe (AClass) Single arm bracket of suitable length to give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the existing surface/ wall with 2nos. MS flat clamp 25mm x 5mm, 30cm long and 4nos. fastner 10mm x 75mm long with two coats of an approved aluminium paint complete in all respect as approved by the Engineerin- charge at site:-Single Arm Bracket 1 metre Long G.I. Pipe 40mm Dia.

Laying of under ground cable to be laid 1 metre below ground level including excavation, sand cushioning, covering with sand & First class bricks and back filling the trench etc.

Erection of G.I. Pipe/ 3-Stepped Steel tubular pole in suitable planting depth below ground level in a hole of excavation and suitable depth to filled in up to 15 cm below G/L with 1:2:4 cement concrete mixture but excluding cost of pole including two coats of approved aluminium paint etc:-Erection of G.I. pipe pole upto 6 m length (hole of excavation about 30 cm dia.)

Making of cement concrete muff of overall size 450mmdia., suitable length (15cm below ground level) with 1:2:4 cement concrete mixture. The muff is to be made around the steel tubular pole/ GI pipe pole. The outer surface of the muff shall be finished with 1:2 cement plaster with two coats of white snowcem complete in all respect as approved and desired by the Engineer inCharge at site:-Cement Concrete Muff of Overall Size 450mm dia., 60cm long

Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:-SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 200mm x 140mm x 95mm with hinged water tight cover with locking arrangement

Providing & fixing bajaj LED Luminaire (45 W) street light

Providing LED Batten Tube light(Orient or Equivalent) complete in all respect.

E/W in excavation in ordinary soil,exclusive compensation of earth. Kassi work undressed involving an avg. horizontal throw upto 2 meter and vertical lift .5 m incl breaking of clods

Prepration of subgrade and compaction of earth

Cement concrete 1:4:8 with 40mm gauge stone aggregates in foundation

Providing and laying factory made rubber moulded smooth finish cement conc. Kerb M-20 grade 250mm high with bottom woidth 165mm and top width 115mm made over strong vibratory table and fixinf with cement morter 1:2

Providing and laying 60 mm thick cement concrete interlocking paver block of M- 35 grade machine made rubber moulded smooth finish by strong vibratory process or with vibro-hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete

Extra cost for using darken fast shade for interlocking pavers of any shape & thickness instead of ordinary gray colours.

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications

Painting two coats with synthetic enamel paints in all shades on newwood work or metallic surface t.

First class burnt brick work laid in cement sand mortar 1:4 in foundation & plinth level

Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.

12.5mm th cement plaster in CM 1:4

20mm th cement plaster in CM 1:4

Finishing walls with acralic smooth exterior paint of reqdshade with 2 or more coatsapplied @ 1.67kg/10sqm over and incl. base coat of water proofing cement paint @ 2.20kg/10sqm

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Area of Door upto 2 sqm

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly orced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing .. (a) Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)

Erection of exhaust fan with louver shutter on the wall/window grill

Providing LED Batten Tube light (Orient or Equivalent) complete in all respect.

Bottom khurra on ground 1.2mx0.6m consisting of bricks laid in CM 1:3 over 7.5cm cement concrete 1:8:16 incl 12.5mm th cement plaster 1:30.6x0.6m for for rain water pipe in in 25mm th cement cion 1:2:4 over 50mmth cement conc 1:8:16

Erection of 1x20/28/36/40W Box Type (LED/Fluorescent 0 light fixture (Labour rate only)

CHARANJEET SINGH CONTRACTOR (BID ID -676542)

GURLAL BUILDERS (BID ID -676617)