Repair /Renovation of Range Office Romshi (Pulwama), Shopian Forest Division

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5mtr in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5mtr including getting out excavated soil and disposal of surplus soil as directed, within a lead of 50 mtr. All kinds of soil

P/L of Nallah boulder 150mm size dry hand packed incl all leads complete job.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) (A) Crushed incl all carraige

P/L RCC 1.1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) All work upto plinth level incl all carraige

P/L Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in lintel beams, suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level incl all carraige

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:3:6 (1cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (A) Crushed incl all carraige

Reinforcement for RCC incl straightening , cutting , bending and binding in position TMT bars incl all carraige

Centring and shuttermg including strutting, propping etc. and removal of form work

for Foundations: footings, bases of columns etc. for mass concrete.

Lintels, beams, girders, bressumers and centilevers.

Suspended floors, roofs, landings, balconies and access platform.

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate. (a) Crushed.

Providing and fixing plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface Second class Teak Wood 12 mm thick incl Polishing with wood polish incl priming coat with wood primer on inexposed surfaces.

Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 500x500 mm

12mm Cement plaster finished with a floating coat of neat cement of mix:1 : 4 ( 1 cement : 4 coarse sand)

Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineerin- Charge.a. 18 mm thick Italian Marble stone slab, Perlato, Rossoverona, Fire Red or Dark Emperadore etc.

Marble work gang saw cut (polished and machine cut) of thickness 16 mm for wall lining (veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 (1 cement: 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Raj Nagar plain white marble/Udaipur green marble/zebra black marble (Area of slab upto 0.5 sqm)

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble Work

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer

Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x510mm bowl depth 200mm

Providing and fixing 40mm waste coupling incl waste pipe for kitchen sink.

Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap.

P/F of PVC Class C waste pipes and fittings

150mm dia pipe

100mm dia pipe

75mm dia pipe

Double unequall junction of required degree 100x100x75x150 with door insertion

Single unequall junction of required degree 75x100x100x100 with door insertion

Plain bend of required degree 100mm

Plain bend of required degree 150mm

Providing and fixing G.l. pipes complete with G.l. fittings and clamps.

Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia. nominal bore (b) Medium

Internal work-Exposed on wall 20 mm dia. nominal bore (b) Medium

Providing and fixing UPVC pipes complete with G.l. fittings including trenching and refilling etc. (external work) 25 mm dia. nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 a) 15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore

Providing and fixing C.P. brass Angle valve approved quality conforming to IS : 8931 a) 15 mm nominal bore

Providing and fixing 15 mm nominal bore of standard type C.P. sink mixer of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing C.P. Gate valve approved quality conforming to IS : 8931 a) 15 mm nominal bore

Providing and fixing . Ballvalve approved quality conforming to IS : 8931 a) 15 mm nominal bore

Making soak pit 2.5 m diameter 3.0 metre deep with 45x45 em dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With F.P.S. bricks.

Providing and installing SINTEX Water tank on roof level incl all necessary fittings. Complete job.

Constructing brick masonarry collection chambers 600X600 internal size and 600mm deep fixed with C I cover and frame 600x 600 mm

Providing and fixing PVC Channels 20x12mm. / PVC conduits of dia 20mm. As required

Wiring for lighting points / fan points/ exhaust points/ call bell points with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable This excludes conduit make Anchor/finolex/polycab or equivalent.B) Lighting points

Wiring for heating points with 2.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable This excludes conduit make Anchor/finolex/polycab or equivalent.Heating Points

Wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required make Anchor/finolex/polycab or equivalent.

Sub main 1mm, 1.5mm

Sub main 2.5mm 4mm

Supply and Installation of Exhaust fans with stylish plastic exhaust 250 mm (10") in the existing opening incl connections, testing, commisioning etc as required. make Anchor/finolex/polycab or equivalent. Exhaust Fan

Providing and supplying SS Combine

Supply and Fixing of 16 way horizontal type three pole and neutral, sheet steel, MCB distribution board , 415 V on surface / recess complete with tinned copper bus bar , neutral bus bar, earth bar, din bar, interconnections, Powder painted including earthing etc. as required. ( but without MCB /RCCB / isolator ) make Anchor/finolex/polycab or equivalent.

Supply and fixing of 5 amps to 32 amps rating 240/415 Volts "C" curve, miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissiong etc as required of approved brand make Anchor/finolex/polycab or equivalent.

Supply and fixing of MCB DP 63 A

Supply and fixing of 7/16 copper wire

Concealed / surface LED Lights

MOHD YOUSUF TELLI