SPECIAL REPAIRS TO DRAIN FOOTPATH AND OTHER CONNECTED ITEMS AT NARAINA BAGH NARAINA IN THE AOR AGE BR NAVY UNDER GE NEW DELHI

Amount

Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises (Outside MoD land to any lead) complete all as specified and directed.

S&F 10 mm to 12 mm thick heavy duty endura tiles as in porch parking open lawn, garden etc., area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15 mm thick screed in cement mortar 1:4 as in floors (size of colour tiles will be approved by GE) complete all as specified and directed.

M&L for Non-skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed.

M&L for Glazed ceramic digital walls tiles coloured (300 x 200 mm /350x250mm /450x300mm/ 300x450), 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality, set and jointed in neat cement slurry and pointed in coloured cement to match, including rendering 10mm thick on fair faces or other than fair faces of brickwork in cement mortar 1:4, finished even and fair as in backing layer complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular), polished, area of each tile not exceeding 0.36 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed.

M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed.

M&L in repairs for Vitreous China wash basin, white, flat back, size 550x 450mm excluding taps, waste chain and plug and porcelain stopper but including the brackets, 32mm dia brass chromium plated waste coupling and PVC waste pipe complete all as specified and directed.

M&L in repairs for Brass CP pillar taps, cast copper alloy with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed.

S&F in repairs for Brass chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.

M&L for Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromoium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 liters, low level, White with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description complete all as specified and directed.

S&F in repairs brass chromium plated Health Faucet including flexible pipe of 15 mm bore and 1.20M long with and including 15 mm bore complete all as specified and directed.

S&F in repairs Bib taps, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed down screwed for iron pipe, 15 mm bore complete all as specified and directed.

S&F in repairs Tubular towel rail 20mm dia 'D' type brass chromium plated 60 cm long between flanges fixed complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose with swivel joints, 125 mm dia with CP neck including fixing to steel pipe or union 15 mm nominal bore complete all as specified and directed.

S&F in repairs brass chromium plated angle valve long shank with cup and washer suitable for 15mm bore pipe, complete all as specified and directed.

S&F in repair 15mm size PVC connection 600mm long incl PTMT nuts and PVC washers at both ends screwed both ends for iron pipe complete all as specified and directed.

S&F in repair PVC bathroom cabinet mirror of size 500 x 400 mm with single side hung shutter including single looking mirror with PVC inner shelves of any colour complete all as specified and directed.

S&F brass chromium plated towel ring square with round flange fixed with steel screw on wall complete all as specified and directed.

S&F in repairs Drapery curtain rods decorative type stainless steel 304 Grade, 25mm nominal dia and having wall thickness 1.40 mm of approved quality/make including fixing of two number decorative brackets fixed in brick/concrete wall, Two number knob on both ends of curtain rods (The length of each curtain rod will be 1.00m to 2.50m long) complete all as directed and specified.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store, for 15 mm dia pipe, complete all as specified and directed.

M&L for Mild steel galvanized steel tubing of 15 mm bore with screwed socket joints as in concealed /open pipe work, medium grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors complete all as specified and directed.

Refixing old steel tubing and connections of 15 mm bore including new fiitings in new or old position complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water etc to receive new plaster complete all as specified and directed.

M&L 15mm thick ready mix plaster on brickwork or concrete surfaces of wall (internal and external surfaces) in two layers (thickness of each layer not more than 10 mm) finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge.

M&L 10mm thick ready mix plaster on brickwork or concrete surfaces of ceiling finished even & smooth. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each complete all as specified and directed.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying and fixing in opening as per specification and drawing.

S&F Factory made solid PVC moulded door shutters (with particle board core), 28 to 30mm thick (Stiles) with 2, 4, or 6 raised panel (as ordered) design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face, supply and fixing in frame at site as per the specification and drawing.

S&F Stainless steel butt hinges of size 100mm complete all as specified and directed.

S&F aluminium anodised tower bolts of extruded section of 150 mm long complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 150 mm long, complete all as specified and directed.

Complete removal of existing old treatment from walls surface using mechanical scrapper only and filling holes of nails with putty etc. and applying a coat of uniform (average 1 mm thickness) of cement base wall care putty of approved make to the entire surface of walls surfaces finished even and smooth and then applying a coat of alkali resistant primer over putty surface and finally applying two coats of oil bound distemper on wall surface to give an even and smooth surface complete all as specified and directed. Note : Distempering shall be carried using paint roller through authrosed applicator only.

M&L for applying two coats of oil bound distemper on newly plastered surfaces of walls including a coat of 1 mm thick (average) wall care putty to give an even and smooth surface including preparation of new surfaces all as specified and directed. Note : Distempering shall be carried using paint roller through authrosed applicator only.

S&F in repairs butt hinges 100 mm long, stainless steel with mild steel hinge pin, bright polished fixed with steel screw complete all as specified and directed.

S&F in repair aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy (ISI marked) complete all as specified and directed.

Excavating in trenches not exc 1.5m wide & n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc 10 Sqm on plan & not exc 1.5m depth & getting out in hard/dense soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering & well ramming in layers not exc. 25cm in hard/dense soil complete all as specified and directed.

Removing excavated material exc 250 m but n.exc 500m & deposited where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe complete with plastic water closet seat white closed pattern with flat bottom & cover & mild steel chromium plated or aluminium hinges device & flush pipe of low or high density of PVC 32mm dia for low level PVC cistern, Ist quality complete all as specified and directed.

S&F in repairs 100mm dia cast iron spun pipe soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs 75mm dia cast iron spun pipe soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

All as per item no. 44.00 here-in-before but fixed on walls

S&F in repairs, cast iron floor trap with chromium plated grating with or without hole including jointing to waste pipes, fixed in cement concrete type B-1 (1:2:4), dia of outlet 75 mm, complete all as specified and directed.

S&F 100mm dia spun cast iron sanitary connection bend (92.5°) with arm 380 to 450mm long (ISI MARKED) complete all as specified and directed.

S&F 100mm dia cast iron bends (any radius) diminishing pieces or tapers ( larger bore measured) (ISI MARKED) complete all as specified and directed.

All as per item no. 48.00 here-in-before but for 75mm dia.

S&F 100mm dia cast iron bends (any radius) diminishing pieces or tapers ( larger bore measured) fitted with oval access door (ISI MARKED) complete all as specified and directed.

S&F branch piece, single, for 100mm dia Cast Iron spun pipe (equal or unequal) ordinary or inverted fitted with oval access doors complete all as specified and directed.

S&F cast iron cowls for 75mm bore pipe complete all as specified and directed.

S&F 100mm dia cast iron sanitary connection- short connections pipe of length 300mm (ISI MARKED) complete all as specified and directed.

S&F salt glazed stone ware gully traps square or rounded mouthed type P or S of size 150 x 150mm incl excavation, earthwork, concrete in Beds, surrounds kerbs & CI grating etc complete all as specified and directed.

S&F in repairs PVC waste pipe of 32 mm internal dia suitable for wash hand basin of minimum lenth 80 cm complete all as specified and directed.

Cutting existing steel tubing for alteration or additions of dia 15 mm (each cut measured) complete all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required of 100/150 mm dia pipe complete all as specified and directed.

M&L for brickwork with old size sub class B" bricks straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed.

Removing building materials /old waste unwanted existing material of any description or any type etc. (other than spoil payable under items 03028 to 03031 in Section-3-Earthwork of SSR-II) to a distance of 5km or beyond the lead included in the rates, including loading, unloading and stacking at the destination in all respect as specified directed by Engr-in-charge. Note : One metric tonne shall mean ‘one load’. Removal is to be done by the shortest practicable route and measurement shall be made accordingly, irrespective of the route actually taken. No additional price shall be allowed for roads in bad repairs, gradients or removal over unconsolidated ground.

M&L for MS framed work as in doors or gates of angle, square bars, flat iron or other section with gusset plates, rails, braces, etc. with necessary welding required to complete the work, drilled for fixing of steel sheeting or other covering, Doors to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified.

M&L for preparing new or previously untreated surfaces of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

S&F in repair factory made precast Road kerb stone of size 300mm X 450mm and thickness 150mm at bottom and 100mm at top,PCC 1:2:4 type B-0 (12.5 mm graded stone agg) vibro mechnically pressed and floated, heavy duty set jointed and pointed in cement mortar 1:3 complete all as specified and directed.

M&L for providing 75 mm thick cement concrete type C-2,1:3:6 (using 40mm graded stone aggregate) in sub base of floors, pavings etc. complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in surface channels benching, coping and drains, etc including slightly rounded or chamfered angles as required complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in Cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed. (INNER GIRTH ONLY MEASURED)

Add or deduct in Item No 65.00 here-in-before for each 25mm girth or part thereof over and under 30cm complete all as specified and as directed.

M&L for Brickwork with subclass ‘B’ modular bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for complete removal of existing treatment from wall/ceiling surfaces of any description not otherwise described and applying two coats of weather proof, water based, modified acrylic exterior wall paint with silicon additives (with anti fungus and anti algae properties) over a coat of solvent based primer over a coat of wall care putty 1.50 mm thick(average) to bring the surface even and smooth complete all as specified and directed.

Demolition of cement concrete ( reinforced) of any description not other wise specifically provided as in cover slabs and similar item of works including cutting of reinforcement to faciliate demolotion etc complete all as specified and directed.

RISHU CONSTRUCTION COMPANY

friends associeates

B S R Enterprises

R S CONSTRUCTION CO.

BEHAL TRADERS

Joshi Constructions

Simran construction Company