REPAIR/MAINT OF LT NETWORK (UG CABLES/OH LINES) AND CONNECTED WORK AT MD ACCN INCLUDING MAP PH-I AND II AREA OF ZONE B AND COMPREHSENSIVE AND PREVENTIVE MAINT OF VARIOUS LAUNDRY PLANTS AND EQUIPMENTS INCLUDING CONNECTED ITEMS AT VARIOUS LOCATIONS UND

Amount

Opening / Disconnecting the electrical connection of defective / burnt out underground LT cable of any size & any core from main switch / DB / junction box / LT panel / L T O/H line etc. Taking out the length of cable ( to be required) from existing loop, cutting the defective portion of cable ,providing (to be required) thimbles / connectors at cable end and reconnecting the cable in previous location with existing main switch / DB / Junction box / LT panel / OH line etc. all as directed by Engineer-in-charge. Note:- (i) The cost of excavation & earth work,returning filling, in relaying of sand / bricks and cost of drawing the( to be required) length from protection pipe ,breaking of brick work / concrete / plaster ( to be required) and redoing ( to be required) for work to match the existing surface shall be deemed to be included in quoted rates and nothing extra should be paid on this account.(ii) Additional cable / protection pipe if required at site shall be measured and paid seperatly. (iii) During currency period of contract , contractor shall depute Two Electrician & four helpers for attending the complaints regularely (daily based) for serial item no. 1.00, 2.00, 3.00, 4.00 & 5.00 .The rates of this aspect is included in serial item no. 1.00, 2.00, 3.00, 4.00 & 5.00 and nothing shall be extra paid on this account . Please note one time payment shall be made to contractor for these items.if any fault / defects occured , contractor shall rectify / replace the same without any extra cost in terms of condition 46 of IAFW-2249 of General condtion of contracts.

Dismantling / Disconnecting / removing the faulty / burnt out overhead one No. conductor of any type / size from insulator on HT / LT pole any type after taking proper shutdown, removal of tree / branches if any fell on Over Head Line, loose the binding wire in each insulators and disconnecting cable connection if any, remove the burnt / damage conductor / earth wire, making joint with New ACSR conductor of suitable size as directed, restretching all the loose spans for tightening to maintain proper sag, binding conductor & earth wire with insulators with new binding wire of existing size, making connection of existing LT / HT cable in old position including cutting of tree branches , if any and removing from site and testing overhead line complete all as directed.

All as Srl iem No 2 here-in-before but for two Nos conductor.

All as Srl iem No 2 here-in-before but for three Nos conductor.

All as Srl iem No 2 here-in-before but for four Nos conductor . Notes for serial item No.02,03,04 & 05 of BOQ : (i) Cost for attending fault, cutting and removal of broken piece of tree / branches, disconnection and jointing of binding wire with insulator, restretching required conductor, making connection with existing cable deemed to be included in quoted rates and nothing shall be paid extra on this account. (ii) If New ACSR conductor,Earth wire requires for this item shall be measured and Paid seperately under appropriate items of Schedule'A' BOQ. (iii) Cost of binding wire and insulators is included in this item and nothing shall be paid extra on this account.

Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for pipe line, cable trenches etc not exceeding 10 sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Material & labour sand cushioning using clean Fine River sand for underground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified and directed. ( Note:- Punned thickness shall be considered for payment purpose)

Supply and laying Best quality, locally available, sub class ‘B’ clay bricks (Old Size) for cable protection cover, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete all as specified and directed.

Supply and laying un-reinforced precast concrete cable cover, Class LV, Type 1, Flat size 250mm x 150mm x 40mm complete all as specified and directed.

Re-laying old serviceable bricks for cable protection , laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete all as specified and as directed.

Taking out old unservicable under ground LT XLPE / PVC cable of any size from trenches / wall / roof / road / pipe / pole / DB including taking out of brick layer of cable protection complete all as directed.

Relaying of old serviceable under ground PVC/XLPE LT cable of any grade , any size laid in trenches / fixed to wall / pole / roof / laid in floor including necessary connections and thimbling complete all as specified and as directed.

Supply and laying or fixing or laid in trenches / ducts / through pipes / in floors / under roads / hard standing /along poles and testing XLPE, LT Cable, with PVC outer sheath Type-I as per IS - 5831, insulated stranded aluminium conductor as Per Class-2 of IS - 8130 served with and inner sheathining of PVC tape- ST-I as per IS-5831 color Red, Yellow, Blue & Black ,armoured with Galvanised steel strip or wire and over all PVC sheathed stranded conductor conforming to IS-1554 (Part-I & II) with latest amendments of Size cross sectional area 95 Sqmm 3.5 core ,1100 volts grade heavy duty complete all as specified and as directed.

All as per serial item No. 15 above but for cross sectional area 70 Sqmm 3.5 core ,1100 volts grade.

All as per serial item No. 15 above but for cross sectional area 50 Sqmm 3.5 core ,1100 volts grade.

All as per serial item No. 15 above but for cross sectional area 25 Sqmm 3.5 core ,1100 volts grade.

All as per serial item No. 15 above but for cross sectional area 16 Sqmm 4 core ,1100 volts grade. Note fo serial item No. 13 to 19: Excavation and earth work shall be measured and paid separately under respective item.

Un binding from old insulators and taking down old unservicable insulators and re–stretching only existing ACSR of any size on LT poles including binding the ACSR with new insulators with and including aluminium binding wire 2mm dia complete all as specified and as directed. Note :- (i) The rate of aluminium binding wire 2mm dia is included in this item and nothing shall be paid extra on this account. (ii) New insulators shall be measured and paid seperately under respective item of this scheule of works of BOQ.

All as per srl item No. 20 here-in-before but re–stretching only existing GI earth wire 4 mm dia on LT / HT Poles including binding with 1.63 mm dia GI binding wire all as specified and as directed. Note :- The rate of 1.63 mm dia GI binding wire is included in this item and nothing shall be paid extra on this account.

Cutting / trimming of tree branches upto 1.50 metre distance on each side and 3.00mtr distance on both sides of LT over head lines including collection and removal from road complete all as directed. Note : For measurement and payment purpose each span shall be considered as 40.00 mtr. Span.If the length of span is less than 40.00 mtr measurment and payment shall be considered proportionally.

Supply and fixing in repair shackle type porcelain, vitreous, white, brown or green insulator of size 75mm height, 90mm dia for working pressure 1100 volts including galvanized mild steel strips 31mm x 3 mm, washer, insulator bolts and nuts, dia of bolt 12mm complete all as specified and directed. Note:- The rate of galvanized mild steel strips 31mm x 3 mm, washer, insulator bolts and nuts, dia of bolt 12mm is included in this item and nothing shall be paid extra.

Supply and fixing in repair loop type insulator, vitreous porcelain white, brown or green with over all dimension 65mm x 90 mm , clearance dia of bolt 16 mm complete all as specified and directed.

Taking out old broken PCC Pole of any size , embeded with PCC foundation complete all as specified and directed.

Supply and errecting Pre Stressed concrete Pole 9.00 Mtr long ,102mm x 172 mm at top ,102mm x 279 mm at bottom , class 10 complying with requirements of IS-1678-1978 including painting of poles with two coats of radiant paint over a coat of primer with black and white strips 30 cm wide each up to 1.5 mtr height from top of PCC foundation block and numbering of poles including applying one coat of cement base paint on exposed surface of PCC coping and foundation blocks complete all as specified and directed. Note :- (i) The T & P / vehicles will be arranged by the contractor for transporting the pole if required and the cost deemed to be included in the quoted rates. (ii) The cost of excavation , returning filling and removal of earth work is included in this item and nothing shall be paid extra on this account.

Material and Labour for PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundation of poles etc, filling and mass concrete including necessary form work complete all as specified and directed.

Material and Labour for PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in coping, of poles/struts etc including necessary form work complete all as specified and directed.

Supply and fix in repair Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed. Note : The rate of one primer coat, one under coat and one finishing coat of paint is included in this item.The payment shall be made as per actual weight of material. During weighting the weight of paint and primer shall not be considered for payment purpose.nothing shall be extra paid on this account.

Supply and fix in repair stay assembly comprising of GI stay bow 14 mm dia, 40 cm long complete with accessories as shown in Electrical plate No 1 of SSR Part - I using galvanised stay rod 20 mm dia, 215 cm long with threaded ends GI nuts, bolts, washers, stay plate 30 cm x 30 cm x 6 mm thick ,2 Nosf thimbles, MS clamps made out of 50mm x 6 mm flat iron, loop stay insulator, stay wire 7/8 SWG complete including painting all exposed surfaces of MS work including two coats of aluminium paint over a coat of red oxide zinc chromate primer complete all as specified and directed. Note : Loop type insulators, Earth work and concrete work shall be measured and paid for separately under the respective item of BOQ.

Supply , fixing and stretching in repair ACSR of any size as per site requirement on existing HT/LT poles including binding on existing insulator with aluminium binding wire 2mm dia complete all as specified and directed by Engineer-in-charge. Note :- 1. For measurement and payment purpose only the weight of ACSR shall be considered .The weight of aluminium binding wire 2.00mm shall not be considered.2. The rate of aluminium binding wire 2.00mm is included in this item and nothing shall be paid extra on this account.(ii)(ii) New insulators if required shall be measured and paid seperately under respective item of this scheule of works of BOQ.

Supply , fixing and Stretching in repair 4mm dia GI earth wire / guard cradles on existing HT / LT poles binding with and including GI binding wire 1.63 mm complete all as specified and directed. Note :- (i) For measurement and payment purpose only the weight of 4mm dia GI earth wire / guard cradles shall be considered .The weight of GI binding wire 1.63 mm shall not be considered. (ii) The rate of GI binding wire 1.63 mm is included in this item and nothing shall be paid extra on this account.

Cleaning and preparation of old painted surface of LT PCC Street light Pole up to 1.50 mtr height from top of PCC foundation block, making alternative black and white strips on pole with Radiant paint ( each strip 30cm hight ) and writing pole nos. including applying one coat of cement base paint on exposed surface of PCC coping and foundation blocks complete all as specified and directed.

Supply and fixing PVC separator suitable for 3/4 way conductor complete all directed.

Supply and fixing PVC separator suitable for 5/6 way conductor complete all directed.

Supply and laying or fixing in repair GI tubing light grade 40 mm dia for cable protection including fitting complete with flat iron clamps size of flat iron 25mm x 4mm, nuts, bolts & washers fixed to poles / along wall / floor / under road / across the drain or nallah / laid in trench complete all as specified and directed.

All as per serial item No. 36 above but for 50 mm bore GI tubing light grade.

All as per serial item No. 36 above but for 80 mm bore GI tubing light grade.

Demolitiong of old earth pit and Material and Labour Earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including GI strip 32mm X 6 mm by means of GI bolts/nuts/washers, protected by 40 mm bore GI light grade pipe. Earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15 cm thick all around bottom and top. 20 mm GI light grade pipe for watering and including funnel, wire mesh,RCC cover & frame, PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in earthing pit including necessary excavation & earth work, all as specified & shown in electrical plate No. 3 of SSR Part – I. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner.

Supply and fix in repair earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required by using 25mm x 3mm aluminium strip complete all as specified and directed.

Supply and fixing in repair MCCB, 3 phase, 4 pole, 415 volt of capacity 630 Amp, with spread terminal with incoming and outgoing phase insulation sleeves short circuit, shunt trip coil with contactor, breaking capacity not less than 35/36 KA , thermal setting 80-100%, Ics-100% Icu confirming to IEC-947, IS-13947 type OH, including thimbles, nuts, bolts, washers etc disconnecting and making incoming, outgoing connections complete all as specified and directed.

All as per serial item No. 41 above but for MCCB, 3 phase, 4 pole, 415 volt of capacity 400 Amp, breaking capacity not less than 35/36 KA.

All as per serial item No. 41 above but for MCCB, 3 phase, 4 pole, 415 volt of capacity 250 Amp, breaking capacity not less than 25 KA.

All as per serial item No. 41 above but for MCCB, 3 phase, 4 pole, 415 volt of capacity 200 Amp, breaking capacity not less than 25 KA.

All as per serial item No. 41 above but for MCCB, 3 phase, 4 pole, 415 volt of capacity 100 Amp, breaking capacity not less than 25 KA.

All as per serial item No. 41 above but for MCCB, 3 phase, 4 pole, 415 volt of capacity 63 Amp, breaking capacity not less than 25 KA.

Supply and fixing in repair MCB suitable for 415 volts AC supply, 63 Amps, Four Pole 'C' series with over load and short circuit protection and rupturing capacity not less than 9/10 KA. complete all as specified and directed.

Material and labour for making the hole under road and hard standing for laying and incluidng inserting Galvanised steel light grade pipe of 100 mm dia including all fittings as required at site by mechanical drill system or Auger system and making the surface good as per existing surface completed all as specified and directed. Note : The rate of Galvanised steel light grade pipe of 100 mm dia is included in this item and nothing shall be paid extra on this account.

Cutting /Cleaning away all grass,bushes,under growth small tree roots,hedges,vegetation, branches of trees etc at installation of electric supply up to entire satisfaction of Engineer -in-charge and disposing the same at a distance upto 50 mtr away from the prepherial area under clearence complete all as directed.

Taking down old unserviceable LT feeder pillar box of any discription and size including demolished PCC foundation and all accessories such as MCCB/Cubical type complete all as directed.

Supply, fabricating, installation, testing, commissioning and electrically connecting LT feeder pillar box cubical type of size 60 cm x 40 cm x 30 cm, 415 Volts, factory made, machine pressed, dust and vernim proof, out door type, made with CRCA sheet 3.15 mm thick. Feeder pillar box shall be powder coated with seven tank process for treatment of degrasing, pickling and two coats primer before giving the stove epoxy finish, Front opening with single door with provision of rubber beading and locking system including 200 amp aluminium bus bar set of four and 01 No MCCB 63 Amp, 16 KA alongwith provision of hole on bus bar for fixing of cable mounted on PVC / epoxy insulators and mounted on angle iron legs frame made with angle iron of size 50 mm x 50 mm x 6 mm and legs duly spray painted both internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer, legs grouted in PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate including necessary earth work , including all provision of opening for incoming / outgoing cables and testing complete all as directed.

Supply and fix in repair straight through joint (Epoxy) for LT under ground cable including jointing kits suitable for 3.5 core, 25 to 90 Sqmm aluminium conductor cable complete all as directed.

All as per serial item No. 53 above but suitable for 3.5 core, 120 to 400 Sqmm aluminium conductor cable

Maintenance and servicing of following mentioned Machines of Mechanical Laundry including connected control Panel and carrying out routine check of the machine oiling, replacement of all the worn out parts such as nuts bolts washers, connectors, thimbles, lugs, greasing, replacement of defective safety devices, relays, control switch gears, alarms complete for smooth functioning complete all as per manufacturer's instructions and as directed. The Maint and Servicing has to be carried out through OEM i.e. M/s Lucky Engineering Works.The contractor shall submit MOU from the manufacturer regarding execution of work within 15 days of acceptance of tender. The Details and Specifications of the equipments are as follows :- (a) Horizontal washing machine of 50 Kg capacity having outer and inner stainless steel of AISI 304 quality,electrically heated ,front loading ,auto reverse ,auto timed ,auto temperature controlled ,fitted with control panel and 3 phase electric motor etc complete - 02 Nos (b) Direct drive Hydro Extractor of 25 Kg capacity having outer MS galvanised and inner basket SS of AISI 304 quality self balancing with rubber buffer mounts fitted with brake ,starter and 3 phase electric motor etc complete - 02 Nos. (c) Tumble drier of 50 Kg capacity front loading type having outer MS galvanised and inner basket AISI 304 quality ,stainless steel ,electrically heated ,auto reverse auto timed ,fitted with control panel ,blower and 2 electric motors etc complete - 02 Nos (d) Flat bed press of size 30" x 60" with auto timer release and programmable temperature control, dry ironing top including compressor - 01 No. (e) Air compressor with air tank pressure of 7 kg/sqcm to provide air to hot head press and flat work ironer complete with electric motor of required capacity.- 01 No. (f) Vacuum ironing table of size 1480mm x 770mm x 830 mm with table top size 1250mm x 750mm with net weight 50 kg tubular constructionfitted with 2 nos shelves- 01 No. (g) Flat work ironer(steam heated) of roller length of 1600 mm dia of 600 mm - 01 No (h) Troller for wet and dry with holding capacity 50 kg of size 930mm x 630mm x 800mm with net weight 40 kg fully SS fitted with 4 nos sweveling type - 04 Nos. (j) Sluicing machine 7 Kg capacity electrically heated having two doors ,bucket ,wash motor, extractor motor,water inlet connections complete- 02 No. (k) LT Panel box with start / stop push button, contractors, timer for automatic reverse and forward rotation of basket, over load relay, pilot lights, fuse units etc- 01 No

Maintenance and servicing of following mentioned Machines of Mechanical Laundry Plant at 235 Engr connected control Panel and carrying out routine check of the machine oiling, replacement of all the worn out parts greasing, replacement of defective safety devices, relays, control switch gears, alarms complete for smooth functioning all as per manufacturer's instructions and as directed.( three plant installed at different location). The Maint and Servicing has to be carried out through OEM i.e. M/s Supershine Laundry Systems Pvt Ltd. The contractor shall submit MOU from the manufacturer regarding execution of work within 15 days of acceptance of tender.The Details and Specifications of the eqpts are as follows :- (a )Front loaded Washing machine with inbuilt hydro extractor of 25 Kg capacity having outer and inner stainless steel of AISI 304 quality,electrically heated ,front loading ,auto reverse ,auto timed ,auto temperature controlled ,fitted with control panel and 3 phase electric motor etc complete- 09 Nos. (b) Front loaded tumble drier of 25 Kg capacity front loading type having outer MS galvanised and inner basket AISI 304 quality ,stainless steel ,electrically heated ,auto reverse auto timed ,fitted with control panel ,blower and 2 electric motors etc complete - 03 Nos.

All as per serial item No. 56 above but for laundry plant at 20 Mech

All as per serial item No. 56 above but for laundry plant at 38 Asslt Engr Regt. Note for Ser item No. 55 and 58 of BoQ : (i) Minor Spare parts amounitng to Rs 1000.00 which are not included in these items and are reqd to make mchine fucntional are deemed to be included in quoted rates and rest all spares which are required for replacement during the maintenance period shall be measured and paid separately at supply only rates and cost of labour for fixing these spares shall be deemed to be included in the rate quoted for these items and nothing shall be paid extra on this account . (ii) Cost of all consumables required during the maintenance period shall be deemed to be included in the rate quoted for these items and nothing shall be paid extra on this account. (iii) The tenderer has to call the Service engineer of M/s Lucky Engineering Works for servicing of the Machines every month for serial item No.55 of BOQ and M/s Supershine Laundry system Pvt Ltd for serial item No.56 of BoQ. The 02 (Two) preventive / periodical maint services and 01 (one) Half Yearly comprehensive maint service of all the machines as mentioned in Note (a) to (d) of serial item No.55 of BOQ of Make : M/s Lucky Engineering Works in Note (a) to (b) of serial item No.56 of BOQ of Make : M/s Supershine Laundry System Pvt Ltd has to be done from the OEM and. (iv) All the complaint / faults will be addressed within 30 min from the time of receipt of complaint. If, contractor or his tradesmen fails to attend the complained within 30 min from the time of receipt of complaint, the compensation/penalty of Rs. 500.00 (Rupees Five Hundred only) per complaint per hr for first 04 hrs and after that Rs. 1000.00 (Rupees One Thousand only) per complaint per hr shall be recovered from the contractor’s dues. (v) The cost of transportation (to and fro) and other necessary equipment shall be arranged / brought by contractor to complete the job and no extra cost shall be paid to the contractor in this effect.

Supply Only Steel wool suitable for Flat Work Ironer Machine complete all as directed.

Supply Only Flannel cloth suitable for Flat Work Ironer Machine complete all as directed.

Supply Only Final cover suitable for Flat Work Ironer Machine complete all as directed.

Supply Only Conveyor belts with hook & pin suitable for Flat Work Ironer Machine complete all as directed.

Supply Only Guide tape suitable for Flat Work Ironer Machine complete all as directed.

Supply Only Main bearing set roller suitable for Flat Work Ironer Machine complete all as directed.

Supply Only SS flexible Hose of size 25mm for steam inlet suitable for Flat Work Ironer Machine complete all as directed.

Supply Only VFD drive suitable for Flat Work Ironer Machine complete all as directed.

Supply Only V-belt set suitable for Flat Work Ironer Machine complete all as directed.

Supply Only V-belt of size A-102 of main drive suitable for Drying Tumblers of 25 Kg capacity complete all as directed.

Supply Only Main drive bearing of size-2210 alongwith sleeves suitable for Drying Tumblers of 25 Kg capacity complete all as directed.

Supply Only Bye Pass Assembly with SS Ball valves of size 25 mm suitable for Drying Tumblers of 25 Kg capacity complete all as directed.

Supply Only Idler drive bearing of size-22213 alongwith sleeves suitable for Drying Tumblers of 25 Kg capacity complete all as directed.

Supply Only Aluminium blower for suction suitable for Drying Tumblers of 25 Kg capacity complete all as directed.

Supply Only Glass with rubber packing fixed with and including SS screws suitable for Drying Tumblers of 25 Kg capacity complete all as directed.

Supply Only Rubber Packing for lint screen for Drying Tumble of capacity 25 Kg complete all as directed.

Supply Only Door Latches for lint screen suitable for Drying Tumblers of 25 Kg capacity complete all as directed.

Supply Only Door limit switch suitable for Drying Tumblers of 25 Kg capacity complete all as directed.

Supply Only Main door lock suitable for Drying Tumblers of 25 Kg capacity complete all as directed.

Supply Only Timer 0-60 sec time delay suitable for Drying Tumblers of 25 Kg capacity complete all as directed.

Supply Only MPD for Drying Tumbler of capacity 25 Kg complete all as directed.

Supply Only Timer rev-fwd action suitable for Drying Tumblers of 25 Kg capacity complete all as directed.

Supply Only Digital temperature controller suitable for Drying Tumblers of 25 Kg capacity / flat bed press complete all as directed.

Supply Only Contactor AC3 type for Drying Tumbler pf capacity 25 Kg complete all as directed.

Supply Only Teflon Sheet/Cloth with round end springs for Flat Bed Press complete all as directed.

Supply Only Padding set suitable for Flat bed Press complete all as directed.

Supply Only Finial cover with rod and spring for Flat Bed Press complete all as directed.

Supply Only Main bearing suitable for Flat bed Press complete all as directed.

Supply Only Main spring with eye bolt suitable for Flat bed Press complete all as directed.

Supply Only Solenoid Valve for main cylinder for Flat bed Press complete all as directed.

Supply Only Silencers suitable for Flat bed Press complete all as directed.

Supply Only Flow control valve of size 25 mm suitable for Flat bed Press complete all as directed.

Supply Only Flexible hose pipe of size 20 mm for air suitable for Flat bed Press complete all as directed.

Supply Only Air valve of size 15 mm for manual control suitable for Flat bed Press complete all as directed.

Supply Only By pass valve heavy duty of size 25 mm suitable for Flat bed Press complete all as directed.

Supply Only FRL unit for Flat Bed Press complete all as directed.

Supply Only Timer GIC type suitable for Flat bed Press complete all as directed.

Supply Only SS flexible steam inlet pipe of size 20 mm suitable for Flat bed Press complete all as directed.

Supply Only White nipples suitable for Flat bed Press complete all as directed.

Supply Only Thermo Couple for Flat Bed Press complete all as directed.

Supply Only Red / green push button complete all as directed.

Supply Only Indicator lamp complete all as directed.

Supply Only Transformer of 15 Amp capacity suitable for Hydro Extractor of 25 Kg capacity complete all as directed.

Supply Only Buffer suitable for 25 Kg Hydro extractor complete all as directed.

Supply Only Oil seal suitable for 25 Kg Hydro extractor complete all as directed.

Supply Only Brake Timer 0-60 sec time delay suitable for 25 Kg Hydro extractor complete all as directed.

Supply Only Diode 10HI CN 25D suitable for 25 Kg Hydro Extractor complete all as directed.

Supply Only Over load relay suitable for Hydro Extractor of 25 Kg, 5 HP Motor capacity complete all as directed.

Supply Only Limit switch suitable for 25 Kg Hydro extractor complete all as directed.

Supply Only Timer 0-15 sec time delay suitable for 25 Kg Hydro extractor complete all as directed.

Supply Only 3 Ph, 415 Volt , contactor, 40 Amps with neccessary NO & NC aux contact suitable for 25 Kg Hydro extractor complete all as directed.

Supply Only 3 Ph, 415 Volt , contactor, 25 Amps with neccessary NO & NC aux contact suitable for 25 Kg Hydro extractor complete all as directed.

Supply Only Spring suitable for 25 Kg Hydro extractor complete all as directed.

Supply Only Main Drive Bearing Block complete all as directed.

Supply Only Main Drive Bearing complete all as directed.

Supply Only Main Drive Sleeve complete all as directed.

Supply Only Counter Bearing Block complete all as directed.

Supply Only Counter Bearing complete all as directed.

Supply Only Counter Sleeve complete all as directed.

Supply Only Drive Belt complete all as directed.

Supply Only Counter Belt complete all as directed.

Supply Only Drive/Blower Motor complete all as directed.

Supply Only Microprocessor Card for 50 Kg Machine complete all as directed.

Supply Only Temperature Probe complete all as directed.

Supply Only Reversing Contactor complete all as directed.

Supply Only Blower Contactor complete all as directed.

Supply Only Power Supply Card complete all as directed.

Supply Only Emergency Swtich complete all as directed.

Supply Only Door handle complete all as directed.

Supply Only Door Glass complete all as directed.

Supply Only Door Rubber Gasket complete all as directed.

Supply Only Glass Gasket complete all as directed.

Supply Only Blower fan complete all as directed.

Supply Only Lint Mesh Filter complete all as directed.

Supply Only Main Drive Pulley complete all as directed.

Supply Only Main Drive Pulley Bush complete all as directed.

Supply Only Counter Pulley complete all as directed.

Supply Only Counter Shaft complete all as directed.

Supply Only Motor Pulley complete all as directed.

Supply Only Door Lint Handle complete all as directed.

Supply Only Door Lint Lock complete all as directed.

Supply Only Door Lint Key complete all as directed.

Supply Only Door Hinges complete all as directed.

Supply Only Heating Element 3 KW complete all as directed.

Supply Only Heating Glass Wire complete all as directed.

Supply Only Microprocessor Board with display and output card for 25 Kg Washing Machine complete all as directed.

Supply Only Power Supply Card complete all as directed.

Supply Only Heating Contactor complete all as directed.

Supply Only Relay Card complete all as directed.

Supply Only MCB Switch complete all as directed.

Supply Only Variable Frequency Drive (VFD) complete all as directed.

Supply Only Bearing Housing complete all as directed.

Supply Only Main Bearing complete all as directed.

Supply Only Bearing Sleeve complete all as directed.

Supply Only Oil Seal complete all as directed.

Supply Only Water Valve complete all as directed.

Supply Only Chemical Valve complete all as directed.

Supply Only Drain Valve complete all as directed.

Supply Only Chemical Hose complete all as directed.

Supply Only Drain Hose Pipe complete all as directed.

Supply Only Emergency Switch complete all as directed.

Supply Only Door Rubber Gasket for Washing Machine 25 Kg complete all as directed.

Supply Only Door Glass for Washing Machine 25 Kg complete all as directed.

Supply Only Door Glass Gasket for Washing Machine 25 Kg complete all as directed.

Supply Only Heating Element for Washing Machine 25 Kg 2 Kw complete all as directed.

Supply Only Heating Glass Wire for Washing Machine 25 Kg complete all as directed.

Supply Only Main Motor complete all as directed.

Supply Only Motor Belts of size B61 to 102 complete all as directed.

Supply Only Supply only heating coil as per sample complete all as directed.. Make-Danfoss

Supply Only Supply only contactor ML-1.5 complete all as directed. Make-L&T

Supply Only Supply only contactor ML-2 complete all as directed. Make-L&T

Supply Only Supply only electronic timer ST100 complete all as directed..Make-L&T

Supply only solenoid valve of size 1/3" to 2/3" complete all as directed..

Supply only ON/OFF push button with thermo plastic body actuators with carrier having flush type push button complete all as directed.Make-AE

Supply only overload relay complete all as directed..Make-L&T

Supply only strip heater in paired (2 KW) of ISI marked 2 No complete all as directed. Make: Danfoss

Supply only breaking transformer of 5KW capacity complete all as directed..

Supply only DC convertor of capacity 110V,2.5Amp complete all as directed.

Supply only Air pressure controller complete all as directed.

Supply only air pressure gauge of capacity 0-300 PSI complete all as directed. Make-H Guru.

Supply only DOL starter 5 HP complete all as directed..Make-L&T

Supply only gate valve 20mm complete all as directed.

Supply only auto cut switch for hand electric iron complete all as directed.

Supply only Voltmeter complete all as directed. Make-AE.

Supply only Ammeter complete all as directed. .Make-AE

Supply only Pedestal bearing model NSK-517 complete all as directed. Make-FK

Supply only trolly wheel for troller of capacity 50 Kg as per sample complete all as directed.

M & L for Servicing and rewiding of motor of 7.5 to 10 HP capacity including replacement of wornout bearing and bushes complete all as directed. Make- ABB/ Bharat bijlee.

M & L for Servicing and rewiding of motor of 3 to 5 HP capacity including replacement of wornout bearing and bushes complete all as directed. Make- ABB/ Bharat bijlee.

M & L for Servicing and replacement of wornout bearing and bushes of hydraulic pump complete all as directed.

Supply and fixing in repair MCCB 3 pole 415 volt of capacity 100 Amp,breaking capacity not less than 25 ka ,thermal setting 80-100%,Ics=100% Icu,confirming to IEC-947,IS-1347,including thimble,nuts,bolts washer complete all as directed.

Supply and fixing in repair MCB 3 pole 415 volt of capacity 63 Amp,including thimble,nuts,bolts washer complete all as directed.

Supply and fixing in repair MCB 3 pole 415 volt of capacity 32 Amp,including thimble,nuts,bolts washer complete all as directed.

Supply only sensor for auto water filling in drum complete all as directed.

Supply only programmable logic controller kit model-TM218LDA40DRN of ISI marked complete all as directed.

Supply only contactor MNX-25 complete all as directed. Make-L&T

Supply only contactor MNX-18 complete all as directed. Make-L&T

Supply and fixing in repair MCB 3 pole 415 volt of capacity 10 Amp,including thimble,nuts,bolts washer complete all as directed.

Desconnecting and removing unserviceable MCB 6 amp. Supply and fixing MCB 3 pole 415 volt of capacity 6 Amp,including thimble,nuts,bolts washer complete all as directed.

NASIB ENGINEERS AND CONSTRUCTION