Construction of Commerce block at Govt Post Graduate Degree College at Solan

Amount

Excavation in earth work by mechanical means (Hydraulic excavator)/ manual means in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiselling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD. specification of sorting out useful & unuseful materials and stacking the same in all leads and lifts and levelling of surplus excavated earth on approved dumping sites (to be arranged by the contractor including payment of prescribed dumping charges of Municipal Committee / Local body if levied any) through all modes of transportation including head load, animal load or mechanical means along with its levelling fine dressing and all labour, machineries, materials, tools equipments and safety measures and incidentals necessary to complete the work by mechanized means and labour (if any required) .All useful materials, such as stones, shingles, aggregate and slates shall be sorted along road side to the maximum possible extent in all leads and lifts through all modes of transportation and used / removed as per direction of Engineer in Charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all incidental charges.

Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with in all lead and lift as per Technical Specification Clause 1603.1( one six zero three point one) and MORD specification including carriage of all labour equipment and materials to various location of site through all modes of transportations in all lead, lift and all incidental charges. all work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erossions, damage to hill side, water pollutions etc., and to protect stability of hill side rock work shall be executed with chiseling, wedging out rock, where blasting is prohibited). All earth work in excavation including rock excavation shall be carried out true to lines, grades, side slopes, width, camber super elevations and levels as shown on the drawing or as directed by the Engineer-in- Charge. Stacking of materials useful for construction at suitable sites and safe disposal of unserviceable cut materials in specified manners, trimming, filling of unevenness blindages and finishing of the road to specified dimensions as directed by the Engineer-in-Charge. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage rain and other cases, it shall be removed by the suitable diversion, bailing out or de watering as directed and the area of the foundation or embankment shall be kept dry. Any loss to the public or private property during the course of execution shall be the sole responsibility of the contractor, which shall have to be duly compensated by him at his own cost of all cases.

Loosening, Levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4 as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all lead, lift, other incidental charges and as per direction of engineer in charge.

Filling in plinth with course sand under floor including, watering, ramming, consolidating and dressing complete as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all lead, lift, other incidental charges and as per direction of engineer in charge.

Centering and shuttering including strutting, propping etc. and removal of form work including carriage of all labour equipment and material to various location through all modes of transportation in all lead, lift, other incidental charges and as per direction of engineer in charge.

Foundation, footings, bases of columns etc. for mass concrete

Vertical surfaces such as wall (any thickness) including attached pilasters, buttresses, plinth and string courses etc.in all floor level & height.

Suspended floors, roofs, landings, balconies and access platform in all floor level & height.

Columns, Pillars, Piers, Abutments, Posts and Strutsin all floor level & height.

Lintels, beams, plinth beams, girders, bressumers and cantilevers in all floor level & height.

Stairs, (excluding landings) except spiral-staircases in all floor level & height.

Edges of slabs and breaks in floors and walls under 20 cm wide.

Providing and laying Plain Cement Concrete nominal mix 1:6:12 (one cement isto six sand isto twelve graded stone aggregate 40mm (fourty milimeters) nominal size) Mechanically mixed, vibrated and curing complete in open foundations and plinths for all type of structure including the cost of form work complete as per drawing and MORD Technical Specification clause 802, 803, 1202 and 1203 (Eight hundred two, eight hundred three, one thousand two hundred two and one thousand two hundred three) or as directed by the Engineer-in-Charge including carriage of materials with in all leads and lifts and other incidental charges.

Providing and laying cement concrete 1:4:8(one cment: four sand: eight graded stone aggt. 40mm (forty milimeter) nominal size) and curing complete excluding cost of from work in foundation and plinth. as per HP.PWD specification including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all iincidential charges.

Providing and Laying P.C.C nominal mix 1:4:8 (40mm nominal size) for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all lead, lift, other incidental charges and as per direction of engineer in charge.

Providing and laying concrete for P.C.C. grade M-10 (ten) nominal mix 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty milimeters) nominal size) mechanically mixed and vibrated in open foundations complete as per drawings and technical specifications clause 802, 803,1202 and 1203 (eight hundred two, eight hundred three, one thousand two hundred two and one thousand two hundred three) curing complete as per MORD specifications including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges

Providing concrete for plain/reinforced concrete ( 1:2:4 20mm nominal size) in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all lead, lift, other incidental charges and as per direction of engineer in charge.

Providing and laying cement concrete work 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 20 mm nominal size) michamically mixed, vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work. including carriage of all labour equipment and material to various location through all modes of transportation in all lead lift and including all incidental charges.

Foundation, footing, bases of columns and the like and mass concrete.

Wall ant thickness, Columns, pillars, posts and struts upto all floor level :-

Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever upto all floors and levels.

Providing and laying cement concrete 1:1½:3 [ One cement isto One and half sand isto Three graded crushed hard stone aggregate 20 (Twenty) millimetres nominal size] mechanically mixed and vibrated for compacting concrete to give smooth and even surface and curing complete, including centering and shuttering etc. but excluding cost of reinforcement for reinforced concrete work in Moulding as in cornices, window sills etc. not exceeding 15cm. in girth, as per H.P. PWD. specification (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead, lift and including all incidental charges.

Providing tor steel reinforcement of Sail, Tisco, Shayam steel or its equivalent make for reinforced cement concrete work including bending, binding and placing in position including cost of binding wire complete as per structural drawing in all floors up to all heights and levels, as per direction of Engineer-in-Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges.

Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg. (two point seven fife kilogramme) of cement per square metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete as per direction of Engineer-in-Charge and as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 (one cement isto three sand) as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges

Random rubble masonry / polygonal rubble masonry (Uncoursed/ brought to courses) with hard stone of approved quality in cement mortar 1:6 ( One cement isto six sand ) in foundation and plinth including leveling up with cement concrtete 1:6:12 { One cement isto Six sand isto Twelve graded hard crushed stone aggregate 20 (Twenty) millimeters nominal size}at plinth level as per HP.PWD specification, including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead and lift, including all incidental charges.

Square rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all lead, lift, other incidental charges and as per direction of engineer in charge.

Providing weep holes in brick masonry/stone masonry/plain reinforced concrete abutment, wing wall, return wall with 100mm (one hundred millimeter) dia PVC pipe extending through the full width of the structure with slope of 1:20 (One verticle isto twenty horizontal) towards drawing face complete as per drawing and technical specification clause 614, 709, 1204.3.7(six hundred fourteen, seven hundred nine, one thousand two hundred four point three point seven) or as directed by the Engineer-in-Charge including carriage of materials with in all lead and lift and other incidentals.

Providing and fixing aluminium work for fixed portion of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)(Glazing, paneling and dash fasteners to be paid for separately) including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead and lift, including all incidental charges.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Cement Mortar 1:6 (1 cement : 6 coarse sand ) in superstructure avobe plinth level up to floor to all level in all shapes and sizes ,including carriage of all labour equipment and material to various location through all modes of transportation in all lead, lift, other incidental charges and as per direction of engineer in charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level to up to all floor level,including carriage of all labour equipment and material to various location through all modes of transportation in all lead, lift, other incidental charges and as per direction of engineer in charge.

15mm (fifteen millimeter) thick cement plaster inon rough side of single or half brick/conctrete/stone walls for interior plastering upto floor to all level including arises, internal rounded angles, chamfers and rounded angles not exceeding 80mm(eighty millimeter)in girth and finished even in and smooth in cement mortar 1:6 (one cement:six sand) as per direction of Engineer in Charge and as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

15 (Fifteen) millimeters thick cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80(Eighty) millimeters in girth and finished even and smooth in cement mortar 1:6 (One cement isto Six sand), as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all lead and lift.

6 mm. (six milimeter) thick cement plaster in cement mortar 1:3(one cement : three sand) in ceiling an soffits of stairs to all floor level as per H.P. PWD. Specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges

15 (fifteen) millimeters thick Cement plaster skirting (upto 30 (thirty) centimeters height) with cement mortar 1:3 (One cement isto Three sand) finished with a floating coat of neat cement including rounding of junction with floor complete in all floors up to all heights, levels complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providingand laying Unistone / slate 30*20*6 mm size cladding in wall 12mm (Twevel milimeters) thick cement mortar 1:3 (one cement isto three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slate / tiles complete, as PWD Specificcation , including carriage of all labour equipment and material to various locations through all modes of transportationin all leads and lifts , including all incidental charges.

Providing and fixing M.S. ornamental grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws complete in all respect as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing & Fixing Alluminium sheet ceiling with 1mm thick alluminium sheet in pannels of aluminium channels base frame in ceiling with alluminium screws and beeding 40*2mm complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 19 (Nineteen) millimeters thick commercial board water proof shutters for cup board, including fixing with nickel plated piano hinges with screws complete as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 19 (Nineteen) millimeters thick water proof commercial board in shelves/box of cup boards with but joint and fixing with nails and screws etc., including carriage of all labour equipment and material to various locations through all modes of transportation in all lead and lift, including all incidental charges.

Providing and fixing 1 (One) millimeters thick decorative high pressure laminated sheet (sunmica) of plain/ gloss/ matt suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality., including carriage of all labour equipment and material to various location through all modes of transportation in all lead, lift and other incidental charges.

Providing and fixing 6 mm (six millimeter) thick water proof ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately)as per H.P. PWD. Spesification, including carriage of all labour equipment and material to various location through all modes of transportation in all lead, lift and other incidental charges.

Supplying and fixing new Hollock wood fillets wherever necessary including carriage of all labour equipment and material to various location through all modes of transportation in all lead, lift and other incidental charges.

Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete including carriage of all labour equipment and material to various location through all modes of transportation in all lead, lift and other incidental charges.

Providing and fixing all weather proof ACP imported sing panel all weather proof multi colour computerised reflective digital panel 3mm thick , mounted on power coated G.I frame work fixed/ hanging with wall or ceiling etc. with specified clamps and GI wires and rawl plugs etc.complete with all accessories as required as per direction of Engineer-in-Charge.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing and fixing aluminium work for For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15). Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, with decorative lamination on one side and balancing lamination on other side in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing and fixing glazing with float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing and fixing glazing With float glass panes of 6 mm thickness in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): including carriage of all labour, equipments and materials to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing and laying 25mm (twenty five millimeter ) thick Kota stone slab flooring over 20mm (twenty millimeter) average thick base of cement mortar 1:4(one cement : four sand) laid over and jointing with gery cement slurry mixed with pigment to match the shade of the slab as per direction of the Engineer-in-Charge. as per drawing, HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with Medium shade pigment using 50% white cement and 50% ordinary cement to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) including carriage of all labour equipment and material to various location through all modes of transportation in all lead and lift and other incidental charges.

Providing and laying Vitrified tiles in Size of Tile 600x600 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete including carriage of all labour equipment and material to various location through all modes of transportation in all lead and lift and other incidental charges.

Providing and laying 40mm (fourty milimetres) thick Cement concrete flooring in 1:2:4 (one cement:: two sand: four graded stone agg.20mm (twenty milimetres) nominal size) laid in one layer finished with a floating coat of neat cement complete in all respect as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all lead and lift and other incidental charges.

Providingand fixing glass strips 40mm (fourty milimeters) wide and 4mm (four milimeters) thick in joint of cement concrete floors as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 2 (two)mm thick PVC antistatic vinyle flooring plain or colored, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) as per direction of Engineer-in-Charge, and HP.PWD. specification including carriage of all labour equipment and material to various locations through all modes of transportation in all lead and lift and other incidental charges.

Providing and laying red sand stone slab flooring 40mm (forty milimeters) average thick on 20mm (twenty milimeters) average thick base of cement mortar 1:4 (one cementisto four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab i/c rubbing and granite polish finish complete as per HP.PWD. specification ,including carriage of all labour equipment and material to various locations through all modes of transportation in all lead and lift and other incidental charges.

Extra for Kota stone in trade of step and riser using single length upto 2.00 mtr. as per the direction of Engineer-in-charge including carriage of all labour equipment and material to various locations through all modes of transportation in all lead and lift and other incidental charges.

Providing and laying 20mm(twenty millimeter)thick Kota stone slab in risers of steps, skirting dado and pillars laid on 12mm(twelve millimeter (average)thick cement mortar 1:3(one cement: three sand)and jointed with gray cement slurry mixed with pigment to match the shade of the salbs including rubbing and polishing complete as per drawing, HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying Precast terrazo tiles 20 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of :Medium shades pigment using 50% white cement and 50% ordinary cement as per drawing, HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying Vitrified tiles in 600x600(six hundered into six hundred) milimeters sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying 40mm ( forty milimeter ) thick Red sand stone in Skirting 20mm (twenty milimeter ) (average) thickness base of cement mortar 1:4 ( one cement isto four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete as per HPPWD specification including carriage of all equipments and labour to various locations through all modes of transportation in all leads and lifts as per direction of engineer in charge.

6 mm thick in white glazed tiles skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing & fixing prepainted steel of TATA Durashine sheet roofing 0.60 mm thick with zinc coating not less than 275 gm/ m² including vertical / curved surface fixed with polymer bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by the Engineer-in-Charge including carriage of materials with in all leads and lifts and other incidentals.

Providing and fixing polycarbonatd transparent sheet 1.20mm thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpe and bitumen rubber washer complete with all accessories as required as per direction of Engineer-in-Charge.

Providing ridges or hips 60cm (sixty centimeter) over all with 0.45 mm thick prepainted sheet of TATA Durashline fixed with galvanized iron J or L hooks, bolts and nuts 8mm (eight millimeter) dia G.I. limpet and bitumen washers complete 0.63mm (zero point sixty three millimeter) thick with zink coating not less than 275gm/m2 as per drawing, HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing valleys 90 cm (Ninty centimeter) over all prepainted sheet of TATA Durashine plain G.I. sheets fixed with galvanised iron J or L hooks. bolts and nuts 8mm (Eight millimeter) dia G.I. limpet and bitumen washers complete with 1.60 mm zink coating not less than 275gm/m2 as per drawing, HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 30cm (thirty centimeter) wide 120cm (one hundred twenty centimeter) over all box type Culvert with 0.45 mm thick plain prepainte steel sheet of TATA Durashine plain G.I. sheet gutter using 0.63mm (zero point sixty three milimeter) thick sheet with iron brackets 40x3mm(forty into three milimeter) size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design:in all heights and all floor level as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 150 mm diameter ingle socketed pipes on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 150 mm unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete as per drawing, HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

PVC Plain bend 150 mm (one hundred fifty millimeter)

PVC Pdoor bend 150 mm (one hundred fifty millimeter)

PVC Shoe 150 mm (one hundred millimeter)

PVC Collar 150 mm (one hundred millimeter)

Providing and fixing M.S. BP sheet 2 mm (two millimeter) thick in eaves board/facia/soffits ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (base members of steel work shall be measured and paid for separately) work as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works in position and applying a priming coat of approved steel primer using structural steel etc. as required as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing MS railing for stair case having balluster of 19mm x19mm square bar with a clear height of 30cm embedded in Brick masonry wall with electrical/gas welding at top with hand rail 50mm dia of MS. pipe with a applying priming coat of red lead paint as per drawing specification and as per direction of Engineer-in-charge.

Providing and fixing in position collapsible steel shutters with vertical channels 20mmx10mmx2mm (twenty into ten into two millimeter) and braced with flat iron diagonals 20mmx5mm (twenty into five millimeter) size with top and bottom rails of T-iron 40mm x 40mm x 6mm (forty into forty into six millimeter) with 38mm (thirty eight millimeter) dia steel pulley complete with bolts and nuts locking arrangements, stoppers, handles, including aplying a priming coat of red lead paint as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all lead and lift including all incidental charges.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm (fifty millimeter) dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separately)as per HP.PWD specification including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Painting steel work with delux milti surface paint to give an even shade two or more coats as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and Fixing 300mm*300mm RCC pre cast cover with out frame as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and Fixing 455mm*610mm RCC.pree cast cover with out frame as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. Complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

300*16 mm (three hundred into sixteen millimeter)

250x16 mm (two hundred fifty into sixteen millimeter)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

250x10 mm size (two hundred fifty into ten millimeter)

200*10 mm size (two hundred into ten millimeter)

150*10 mm size (one hundred fifty into ten millimeter)

100*10 mm size (one hundred into ten millimeter)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. Complete ias per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

125 mm (one hundred twenty five millimeter)

100 mm (one hundred millimeter)

Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 65x35mm(sixty five into thirty five millimeter) special quality bright finished brass cup board locks or ward robe locks with six levers including necessary screws etc. complete (Indian make of approved quality) as per H.P. PWD. Spesification, including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing aluminium hanging floor door stopper with Single rubber stopper , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete including carriage upto all lead & lift and other incidental charges.

Providing and fixing 150 mm ( one hundred fifty millimeters) bright finished hard drawn hooks and eyes Complete as per HP.PWD. Specification , including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing oxidized M.S. hasps and stapples (safety type) with necessary screws etc. complete as per HP.PWD. Specification , including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 150mm (one hundred fifty millimeter) M.S. single acting springs hinges bright finished with necessary screws etc. Complete as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing & fixing 150 mm M.S. double acting spring hinges bright finished with necessary screws etc. complete including carriage of materials in all lead and lift including all incidental charges.

Providing and fixing triple strip vertical type magnetic catcher with necessary screws etc. complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Making ;half round nosing/ moulding in granite stone/ marble stone in treads of steps, shelves, skirting,dedo etc. with machanical / manual means i/c rubbing and granite polshing as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Applying priming coat with ready mixed paint brushing with pink or gray primer over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting as per HPPWD specification including carriage of material thrtough all modes of transport including all incidentals in all leads and lifts and as per direction of Engineer in Charge.

Painting two coats with enamel paint other than white (excluding priming coat) on new wood and wood based surface with ready mixed paint, brushing to give an even shade including cleaning all dirt, dust and other foreign matter, sand papering and stopping as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges and as per direction of engineer in charge.

Applying one coat of acrylic primer ( Spectrum or equivalent of superior quality) on new concrete/ masonary/plastered surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters , sand papering the surface smooth complete including carriage of materials in all leads and lifts

Wall painting (two or more coats) with acrylic washable emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for melting the surface complete as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. The rate comprising of octroi, royality, Malkana toll tax, sale tax or any other taxes imposed by the Government.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated on crete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface including carriage of materials within all leads and lifts.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer as per HP.PWD. Specification and as per direction of Engineer in Charg including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Finishing walls with textured exterior paint of required shade New work (Two or more coat applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Painting Two coats with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504 as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge including carriage of all labour equipment and material to various locations through all modes of transportation in all lead and lift and other incidental charges.

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, as per direction of Engineer-in-charge. and including carriage of all labour equipments and materials to various location through all modes of transportation in all lead and lift, including all incidental charges.

Providing under layer for plinth protection of 75(Seventy Five) millimeters thick (unconsolidated) bed dry brick /stone aggregate 40(Forty) millimeters nominal size well rammed and consolidated and grouted with fine sand including preparation of ground, as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Constructing Coursed rubble hammer dressed 'U' shape open surface drain with side wall. 15 X 23 cm (Fifteen into twenty three centimeter ) in cement mortar 1:6 ( One Cement : Six approved Sand) and inside plastering with cement mortar 1:3 (One Cement: Three approved Sand) including earth work and laying 10 cm (Ten Centimatre ) cement concrete in 1:5:10 (One Cement : Five approved Sand : Ten graded crushed stone aggregate) of 40 mm (Forty millimetres) nominal size and 7.5 cm (seven Point Five Centimatre ) cement concrete 1:2:4 (One Cement : Two approved Sand : Four graded crushed stone aggregate of 20 mm (Twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design.

Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

( a ) 20 mm nominal bore

( b ) 32mm nominal bore

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

( a ) 15 mm (fifteen millimeter) nominal bore

( b ) 20mm (twenty millimeter) nominal bore

( c ) 32mm (thirty two millimeter) nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :. 20 to 40 mm nominal bore as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately) as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.

Construction chamber 300mm x 300mmx500mm inside size for stop cock with C.I. surface box 100mm x 100 mm x 75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 75mm thick foundation concrete 1:5:10 (1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete with 100 mm thick walls of brick masonry in cement mortar 1:5 (1 cement: 5 sand) as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing Plytheline – Aluminium -Polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

1216 (16 mm O.D. pipe)

1620 (20 mm OD pipe).

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

150mm dia (one hundred fifty millimeter)

110mm dia (one hundred ten millimeter)

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

150mm dia (one hundred fifty millimeter)

110mm dia (one hundred ten millimeter)

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

150mm dia (one hundred fifty millimeter)

110mm dia (one hundred ten millimeter)

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

150mm dia (one hundred fifty millimeter)

110mm dia (one hundred ten millimeter)

Providing and fixing PVC Collars ISI marked including fixing with approved adhesive etc. complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

150mm dia (one hundred fifty millimeter)

110mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

150mm dia (one hundred fifty millimeter)

110mm dia (one hundred ten millimeter)

Providing and fixing PVC offset 45°including fixing with approved adhesive etc. complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

150mm dia (one hundred fifty millimeter)

110mm dia (one hundred ten millimeter)

Providing and fixing PVC double equal branch with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

150mm dia (one hundred fifty millimeter)

110mm dia (one hundred ten millimeter)

Providing and fixing PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

150mm dia (one hundred fifty millimeter)

110mm dia

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

150mm dia (one hundred fifty millimeter)

110mm dia (one hundred ten millimeter)

Providing and fixing 110 mm X 90 mm PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 150 mm X 110 mm dia PVC reducer ISI marked including jointing with approved adhesive etc. complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

150mm dia (one hundred fifty millimeter)

110mm dia (one hundred ten millimeter)

Providing and fixing PVC cowl i/c carriage of materials withas per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

150mm dia (one hundred fifty millimeter)

110mm dia (one hundred ten millimeter)

Cutting chase in stone / brick masonary walls for fixing sand cast iron / cast (spun) iron pipes and fittings including making good the same with stone / brick work in cement mortor 1:3 ( 1 cement 3sand) as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

75mm dia (seventy five millimeter)

100mm dia (one hundred millimeter)

Providsienpgaraatnedly. fixing vitreous China wash down, water closet squatting pan Orissa Pattern size (Indian type W.C pan)580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1cement : 1 sand) (Seat and over to be measured and paid for separately) as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Ordinary closet

Angle Indian Universal closet

Providing and fixing PTMT Coloured / white automatic flushing cistern with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured and paid for separately) as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing G.I. Inlet connection for flush pipe with W.C panas per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers : white plastic seat and cover as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing flat back type of size 430mmx 260mmx 350mm. Size In white colour vitreous china bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 10 Litres capacity: automatic flushing cistern with a pair of C.I. Or M.S brackets complete with fittings including C.I. Syphonic appratus mosquitos proof lid, C.P. brass unions and coupling for connecting with inlet, outlet and over flow pipes including cutting holes and making good the same (Over- flow pipe to be measured and paid for separately as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15mm nominal bore C.P. brass flush pipe /spreaders for urinal with fitting such as unions, clamps etc. (all in C.P. Brass) including cutting holes and making good the same as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing flat back 550mmx400mmvitreous china wash basin with single hole for pillar tap with C.I. Or M.S brackets painted white including cutting holes and making good the same but excluding fittings as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 32mm dia C.P. Brass waste for wash basin or sink as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 600mm x 20mmm C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 600mm x 120 mm glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing toilet paper holder C.P Brass as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws :- Glass container as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 600mm x 300 Division Plate for Urinals Vitreous China as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 15mm dia C.P brass bib taps with capstan head weigth 400 gms as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Providing and fixing 15mm dia C.P Brass pillar tap with capstan head as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Providing and fixing 15mm dia C.P. brass angle valve 15mm without Nuts and pipe as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Providing and fixing brass unions 45 cm length 15 mm nominal bore uplasticised PVC connection pipe as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Providing and fixing brass full way value with wheel as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

15mm nominal bore (fifteen millimeter)

20mm nominal bore (twenty millimeter)

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

15mm nominal bore (fifteen millimeter)

20mm nominal bore (twenty millimeter)

32mm nominal bore (thirty millimeter)

Providing and fixing PTMT bib cock of approved quality fancy 15 mm with flange as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Providing and fixing 15 mm. PTMT pillar cock fancy of approved quality as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Providing and fixing 20 mm X 15 mm PTMT push cock with reducer of approved quality as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Providing and fixing 15 mm PTMT concealed stop cock with flange of approved quality as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Providing and fixing PTMT angle cock of approved quality as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Providing and fixing PTMT jet spray of approved quality with one metre tube as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40mm nominal size) bedding for stone ware pipe of the following internal 150mm dia metre necessary form work and curing complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Providing and laying and pointng with a stiff mixture of cement mortar proportion of 1:1 (1 cement : 1 sand) 150mm internal dia metre salt glazed stone ware grade 'A' half round channels as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Constructing manhole with RCC top slab in 1:2:4 mixure (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 ( 1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1 cement : 3 sand finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing. Inside size 800x800mm and 500mm deep including C.I. Cover with frame (light duty single seat pattern I) 455x600mm internal diametre total weight of cover and frame cover and frame to be less than 38 kg (weight of cover 23kg on and weight of frame 15 kg. With 200mm walls of brick masonary using common burnt clay building bricks in cement mortar 1:6 (1 cement : 6 sand) as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

in side size 800x800mm and 1 metre deep including C.I. Cover with frame (light duty single seat pattern) 450x610mm internal diamensions total weight of cover and frame to be not less than 38kg. (weight of cover 23kg. And weight of frame 15kg.) with 200mm thick wall of brick masonary using commone burnt clay building bricks in cement mortar 1:5 (1 cement : 5 sand) as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Providing and fixing stone ware gully trap grade 'A' complete with C.I. Grating, brick masonary chamber in cement mortar 1:5 and water tight C.I. Cover with frame of 300mmx300mm size (inside)the weight of cover to be not less than 4.53 kg and frame tobe not less than 2.72 kg. 180mmx100mm size P type gully trap as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Providing and fixing stone ware gully trap grade 'A' complete with C.I. Grating, brick masonary chamber in cement mortar 1:5 and water tight C.I. Cover with frame of 300mmx300mm size (inside)the weight of cover to be not less than 4.53 kg and frame tobe not less than 2.72 kg. 180mmx150mm size P type gully trapas per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Providing and installing Mono block Electric pump 2hp single phase of Kirloskar make or equivalent i/c fixing complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Cutting holes upt 30x30cm in wall including making good the same in cement mortar 1:6 (1 cement :6 sand ) per CMs. Depth of cutting. Holes upto and including 400 Sq. cm in area as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges

Cutting holes upto 15cm x15cm in RCC floors and roof for passing drain pipe etc and repairing the holes after insertion of drain pipe etc with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stones aggregate 20mm nominal size) including finishing complete so as to make it leak proof as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges .