CONSTRUCTION OF TWO SEMI UNDERGROUND BUNKER UNDER GE 864 AT BB CANTT, SRINAGAR

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) in all kinds of soil including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and as directed.

Description all as per serial No 1here-in-before, but 1.5 m to 3 m deep, complete all as specified and as directed. .

Description all as per serial No 1 here-in-before but over 3 m deep, complete all as specified and as directed. ..

Plain cement concrete 1:3:6 Type C2 Using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete, complete all as specified and as directed.

Reinforced cement concrete (Design Mix) M-30 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.

Reinforced cement concrete (Design Mix) M-30 as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses, complete all as specified and as directed.

Reinforced cement concrete (Design Mix) M-30 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.

Reinforced cement concrete (Design Mix) M-30 as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed.

Reinforced cement concrete (Design Mix) M-30 as in Columns, pillars, piers, posts and struts, complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and as directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; exceeding 200mm thick (Horizontal or sloping), complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and as directed.

S&F for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

S&F for Mild steel TMT bars 5 to 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

Roof treatment to concrete surfaces by using EPDM sheet, complete all as specified and as directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base, complete all as specified and as directed.

M & L for plain cement concrete, 1:2:4 type B-1 (using 20mm graded crushed stone aggregate 40 mm thick , as in flooring, complete all as specified and as directed.

M&L for rendering 5mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, complete all as specified and as directed.

M&L for rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed.

M & L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed.

M&L for removing Excavated material (soil) exceeding 1.50Km but n exc. 5 km and depositing where directed at a level not exceeding 1.5 M above the starting point, complete all as specified and directed.

S&F Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls, complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

S&F for Plates (plain or chequered) channels or MS Sheets, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, complete all as specified and directed.

Hardcore of guage n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and directed.

S&F 75mm dia PVC (SWR)spout pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and directed.

M & L for Brick with sub -class 'B' bricks,straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 on brick/block or concrete surfaces finished even and smooth (without using extra cement) , complete all as specified and directed.

Cowls riveted to and including 15 cm length of flue pipes of ditto 250mm dia, complete all as specified and directed.

water bar at joint for water percolation proofing of height 150mm, complete all as specified and directed.

S & F PVC(SWR) pipes,single soketed ,in any length ,with rubber rings 75mm dia, complete all as specified and directed.

Supply onlyLiquid water proofing compound, complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 , complete all as specified and directed

M & L 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2, complete as specified and directed.

Excavation in trenches n.exc 1.5m wide and 1.5m depth for foundation etc or for shaft well, cesspits etc n.exc on plan and n.exc 1.5m depth and getting out in hard/dense soi, complete all as specified and directed.

M & L for walling of radom rubble uncoursed well bonded solidily hearted built in CM 1:4 etc all as specified and directed, complete all as specified and directed.

M&L for extra stone walling for hammer dressing in faces stones of random rubble walling uncoursed fro granite or trap stone etc., complete all as specified and as directed.

M&L for providing cement concrete 1:2:4, Type B-1 (using 20mm graded crushed stone aggregate) as in coping etc., complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing including finishing to surfaces even and smooth without using extra cement etc all as specified and directed

M&L for cement concrete 1:3:6 type C2 ( using 40mm graded crushed stone aggregate) as in surface channel and drains, complete all as specified and directed.

M&L for removing excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point, complete all as specified and directed.

Extra for forming fair finished drain channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and directed.

Supply and placing in position SFRC manhole cover of size 600mm x600mmx60mm thick, complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of hard/dense soil, complete all as specified directed.

M&L for 75mm thick plain cement concrete, 1:3:6 type C-2 (using 40mm graded crushed stone agrregate) as in sub base of floors, finished even and fair over well/rammed/ compacted earth, complete all as specified and as directed.

M&L for Plain Cement concrete 1:2:4, Type B-2 (using 40mm graded crushed stone aggregate), as in foundation, filling and mass concrete. , complete all as specified and directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory ompaction by using plate vibrator, filling he joints with fine sand and cutting of paver block as per required size and attern, finishing and sweeping extra sand complete., complete all as specified and directed.

Excavation in post holes (or similar holes) in hard/dense soil each n.exc 0.5cum getting out, and removing surplus soil to a distance n.exc 50m and making good surface , complete all as specified and directed

S&F roof trusses (framed) trussed purlins crane gantries ,rails and fastening and heavy bracket framing ( beam ,tee,angle ,channel or flat sections) including distance pieces ,cleats etc fixed in position conforming to Fe- 410(Gde 250), completed all as specified and as directed., complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed both ends each screwed end to be fitted with washers and one hexagonal square nut, n exc 30 cm long dia of neck n exc 12mm., complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as etc complete all as specified. , complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping, complete all specified and directed.

M&L for preperaring surfaces of newly or previously untreated steel or iron surfaces of any description over 10 cm in width or girth not otherwise described and apply two coats of sythetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for Making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC casing capping strip / PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of Modular boxes suitable for modular plates of diffrent way/sizes for housing / mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etccomplete all as specified and directed.

Description complete all as perserial item No 58 here-in-before, but one light point / fan point wiring system controlled by one way switch, complete all as specified and directed.

Description complete all as perserial item No 58 here-in-before, but one 5 Amp socket outlet point wiring system fixed on independent board & controlled by one way switch, complete all as specified and directed.

Description complete all as per serial item No 58 here-in-before, but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system, complete all as specified and directed.

Supply & fixing of modular type switch 5/6 Amps 220 Volts AC,one module, complete all as specified and directed.

Supply and fixing of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular, complete all as specified and directed.

Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one module, complete all as specified and directed.

Supply and fixing of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular, complete all as specified and directed.

Supply and fixing ceiling rose three terminals type made out of polycarbonate , isolated body complete all as specified and directed.

Supply and fixing of angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adhapor and back plate for housing of bulb Including providing of LED bulb of capacity 7/9 watt warm/ white colour type complete all as specified and directed .

Supply and fixing of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colour complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete fitting, complete all as specified and directed.

Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 4 way type 220 volt AC supply system with IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection complete all as specified and directed .

Supply and fixing of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete all as specified.

Supply and fixing of MCB SP 40 to 63 Amps with breaking capacity 10KA 'C' Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete all as specified..

S&F star rated ventilating exhaust fan made out of sturdy engineering plastic body complete with louvers and shutter, 150 mm sweep, 230 Volts AC single phase, 50Hz, 1200 RPM, coper winding including making of suitable type /size of hole on any type of wall and fixing compete with nut, bolt etc and making good distrubed surface of wall/ceiling & finishes to match and providig flate flexible copper wire & making all electrical connection complete all as specified and directed.

S&F star rated electric wall mounted fan 400 mm sweep of single phase 230 volt AC with having pull cord oscillating type single piece AS blade, three speed pull cord control complete with blade and guard framing support & connecting accessories and fixed/grouting on wall/roof with MS fastner, nut & bolt including providig flate flexible copper wire and making all electrical connection complete all as specified and directed.

M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete work, complete all as specified and directed.

Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 10 sqmm 2 core including laid in trenches or fixing on poles or passing through pipes, complete all as specified and directed.

M&L of Locally available river sand filling in trenches below and above / around UG cable for cable protection, in duct under and above the cables including punning around cable complete all as specified and directed. Note - Punned thickness shall only be measured and paid.

Supply and laying un-reinforced precast PCC cable Cover ISI marked, class LV, type-1, flat, size 250mm x 150mm x 40mm for covering cables laid dry flat as cable protection on sand all as specified., complete all as specified and as directed

S&F galvanised steel tubing,25mm bore, light grade, ISI marked, for protection of under ground cable on pole/wall/under road, complete all as specified and directed.

Please Enable Macros to View BoQ information