SPL REPAIRS TO BLDG NO 223 (1 TO 8) OR MD ACCN AT MEADOWS LINE AREA, BLDG NO C 1 (FOL AND LPG STORES) AND PROVN OF 152 X EXHAUST FAN IN KITCHEN AND BATHROOM/ TOILET OF OR / MD ACCN ABC LINE AND OLD ASSAY LINE AT AOC UNDER GE (SOUTH) SECUNDERABAD

Amount

Dismantling/taking out existing hessain base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing the dismantled debris to a distance exceeding 200m & not exceeding 250m complete all as specified and as directed.

M&L for 1.5mm thick poly urethane water proofing treatment using single component water based liquid applied elastomeric poly urathane water proofing membrane. Thickness of membrane shall be 1.5mm This treatment shall include application of primer coat and two layers of water proofing with fibre glass 45 gsm in between layers and preparation of surface complete all as specified and as directed.

M&L for Plain cement concrete type D-2 (1:4:8) (using 40 mm graded aggregate) for filling in sunken floors etc complete all as specified and as directed.

M&L for Rendering 15 mm thick in CM (1:3) using water proofing compound as per manufacturer instruction as in sunken floor complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately.

M&L for Applying evenly a tack coat of blown bitumen 85/25 @ 1.2 Kg/Sqm over a coat of water based bitumen emulsion primer at the rate of 0.30 Kg/Sqm including cleaning the surface thoroughly from dust and dirt and lay water proofing treatment with felt having glass fibre non woven reinforcement and weighing 3.0 Kgs/Sqm to 4.0 Kgs/Sqm in 100mm overlaps both longitudinally and transversely by torch bounding over a coat of blown bitumen 85/25 @1.2 Kgs/Sqm top of felt as in sunken floor (bottom and vertical) complete all as specified and as directed.

Demolition of cement concrete in floors and pavings n.exc15 cm thickness (below or above ground level) including floor finishes etc,complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement ,mortar bedding (but not backing),removing rubbish off the premices etc, complete all as specifiedand directed.

M&L for 75mm thick plain cement concrete type D2 (1:4:8) (40mm greded aggregate) as in sub base of floor, path etc,complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 ( using 40 mm graded aggregate) as in plinth protection of average 75mm thick including finishing cement concrete surface even and smooth complete all as specified and directed .

M&L for 25 mm thick plain cement concrete type B0 (1:2:4) ( 12.5 mm graded stone aggregate ) as in floors complete all as specified and as directed.

M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/dados etc, over 10mm thick rendering in CM (1:4) on walls such as backing of tiles complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10mm thick rendering in CM (1:3) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and as directed.

M&L for machine cut cudappah stone slab 25 to 30 mm thick over cement 20 mm thick screed base in CM (1:6 ) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab indluding rubbing and polishing including making hole in platform for gas pipe complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similer shine complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exceeding 1.5 Sqm but not exceeeding 4 sqm each complete all as specified and as directed.

Taking down shutters of any description not exc. 1.00 Sq.m each.complete all as specified and as directed.

Ditto- all as per item No.20 above but exceeding 1.0 Sqm but not exceeeding 2.0 sqm each complete all as specified and as directed.

M&L for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.

Supply and fix for Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed.

Supply and fix, steel windows double shutter (one side glazed type with glazed bars and other side gauzed type without glazed bars) with pressed steel frame and side hung shutters including projecting of box type complete all as specified and as directed.

Supply and fix 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane. complete all as specified and as directed.

Cutting holes in brickwall built in cement mortar depth of embedded portion of holdfast exc halfbrick but not exc one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete exceeding 1.5 Sqm but not exceeeding 4 sqm each complete all as specified and as directed.

Supply and fix Pressed steel door frame of size 105 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed .

All as Item No-27 but here in above of size 125 X 60 mm complete all as specified and as directed . .

Material and Labour for PCC 1:3:6 Type C0 ( using 12.5 mm graded stone aggregate ) as in filling in pressed steel door frame complete all as specified and as directed .

Supply and fix 30 mm thick flush shutter ,solid core construction ,with block board core and plywood face panels ,commercial type complete all as specified and as directed.

Supply and fix glazed and skelton shutters divided into squares with plain, chamfered or rounded, mitred and with out sash bars prepared to receive glass, gauge sizes of members of shutters as specified in SSR Pt-I, section 8 , clause 8.24 (A) 35mm thick second class hard wood complete all as specified and as directed.

Supply and fix for Factory made 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete all as specified and as directed

Supply and fix 125 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin type C-21 anodised and fixed complete all as specified and as directed.

Supply and fix for stainless steel wire cloth 0.36 mm nominal dia of wire and aerage width of aperature 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed .

Supply and fix 150 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin type C-21 anodised and fixed complete all as specified and as directed.

Supply and fix for aluminium alloy anodised sliding door bolt with hasp staple (bolt type) length 300mm complete all as specified and as directed.

Supply and fix 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fix for aluminum handles fabricated type anodised 150 mm complete all as specified and as directed.

Supply and fix for floor door stoper of aluminium alloy body of 150 mm long complete all as specified and as directed.

Supply and fix for Mild steel helical door spring 300 mm long complete all as specified and as directed.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer exceeding 10 cm width or girth complete all as specified and as directed.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

Supply and fix in repairs 20mm dia stainless steel decorative curtain rod with brackets of approved quality etc, complete all as specified and as directed.

Supply and fix in repair vitreous china orissa pan squatting pattern 580 X 440mm with integeral foot rests including P or S trap, PVC low level flushing cistern 10 ltrs capacity complete all as specified and as directed.

Supply and fix in repair stainless steel sink made out of 1.00 mm thick sheet for kitchen with plug and washers, waste pipe with cantilever brackets.over all size 495 X 420mm bowl size 410mm X 330mm X160mm complete all as specified and as directed.

Supply and fix for Stainless steel plate rack of size 750x900x250 mm of approved quality complete all as specified and as directed.

Supply and fix in 15 mm dia 45 cm long PVC water connection with PTMT nuts and washers complete all as specified and as directed.

Supply and fix GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls including taking up or down steel tubing of 15 mm dia and connections (walls ceiling or floors etc.) complete all as specified and as directed.

Supply and fix GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls including taking up or down steel tubing of 20 mm dia and connections (walls ceiling or floors etc.) complete all as specified and as directed.

Supply and fix in repairs for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement outlet etc complete all as specified and as directed.

Supply and fix PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm including demolition and beaking up drain AC pipes/PVC pipes set in cement mortar of any dia and size complete all as specified and as directed.

Supply and fix PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm including demolition and beaking up drain AC pipes/PVC pipes set in cement mortar of any dia and size complete all as specified and as directed.

Supply and fix PVC(SWR) bends 110 mm dia without access door complete all as specified and as directed.

Supply and fix PVC(SWR) bends75 mm dia without access door complete all as specified and as directed.

Supply and fix PVC(SWR) bends110 mm dia.with access door complete all as specified and as directed.

Supply and fix PVC(SWR) junction double,(Single T),equal or unequal. 110 mm dia complete all as specified and as directed.

Supply and fix PVC(SWR) junction double,(double T),equal or unequal. 110 mm dia with access door complete all as specified and as directed.

Supply and fix PVC (SWR) vent cowl 110mm dia complete all as specified and as directed.

Supply and fix Rotational moulded polyethylene water storage tanks 500 lts (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part 1 including dismantling water tanks of n. exc 500 ltrs capacity of any type and any description PVC/RCC etc, complete all as specified and as directed.

Supply and fix in repairs 20mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

Supply and fix 20 mm Ball PTMT valves high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

Supply and fix in repairs Brass chromium plated shower rose 125mm size complete all as specified and as directed.

Supply and fix in repairs Brass chromium plated Tubular towel rail 20mm dia D type, 60cm long between flanges complete all as specified and as directed.

Supply & fixing in repair vitreous china wash basin with padestal , white flat size 550x400mm incl bracket cutting for and pining in ends of brackets or erecting stand including PVC connection pipe 15 mm bore 450 mm long , waste coupling of PTMT , PVC waste pipe complete all as specified and as directed.

Supply and fix in repairs 15mm fancy type chromium plated pillar taps cast copper alloy screwed down high pressure complete all as specified and as directed.

Supply and fix in repairs angle/stop valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) complete all as specified and as directed.

Supply and fix in repairs Fancy type chromium plated 15mm Bib taps cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe complete all as specified and as directed.

Demolition of brick work or stone masonary built in cement mortar complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radium built in CM (1:6 )complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radium in half brick thick walls built in CM (1:4) complete all as specified and as directed.

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick works in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 5 mm thick rendering on fair faces of brick work or cement concrete surfaces in CM (1:4) over 10mm thick rendering with CM (1:6) including mixed with WPC finished fair and even complete all as specified and as directed (Note: Water Proofing compound shall be measured and paid for separately)

M&L for rendering 5 mm thick on ceiling in CM (1:3) finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound for roof and sunken floor complete all as specified and as directed

M&L for applying three coats of white wash for new wall surface incl prepation complete all as specified and as directed.

M&L for applying one coat of white wash for old wall surface including prepation of surface complete all as specified and as directed.

M&L for perpartion of new plastered on wall surfaces and applying two coats of cement base paint over a coat of priming paint complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of cement base paint over a coat of primer on old wall surfaces complete all as specified and as directed.

M&L for perpartion of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L for applying one coat of white wash on old ceiling surface including preparation complete all as specified and as directed.

Material and labour for uprooting of wild trees such as grass/bushes etc from the roof / wall surfaces / AC sheets / soil pipes surrounding including its penetated roots with suitable cleaning chemical and making good to the damaged plaster by providing CM 1:3 and finish the surfaces to match with the existing surface complete all as specified and as direceted by Engineer-in-Charge.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

M & L for Concealed Conduit Point wiring with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS type 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc for One light point controlled by one, one way switch 5A, SPcomplete all as specified and as directed. Note1: The wiring shall be done in proper color coding using red,yellow,blue for phases , black for neutral and green for earth Note 2: The cost of cutting of chases of required width and depth for conduit incl plastering ,painting two coats to match the existing wall colour is deemed to be included in the rate quoted in case of concealed wiring.

All as per item No 87 here in before but one ceiling / exhaust fan point controlled by one, one way switch complete all as specified and as directed.

All as per item No 87 here in before but one 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

All as per item No 87 here in before but one 3 Pin 5 Amps switch socket Independt board complete all as specified and as directed.

All as per item No 87 here in before but one Bell point controlled by one bell push complete all as specified and as directed.

All as per item No 87 here in before but one light point controlled by two 2 - way switch 5 amps, SP complete all as specified and as directed.

All as per item No 87 here in before but using 4 Sq mm single core copper conductor cable of multistranded PVC insulated FRLS 1100 Volts grade for 5/15 Amps switch socket combination point including running of 4 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.

Supply and fix Switch piano type single pole one way flush type 5 Amps capacity 230 volts complete all as specified and as directed.

Supply and fix Switch piano two way flush type 5 Amps capacity 230 volts complete all as specified and as directed.

Supply and fix switch socket combination flush type multipurpose 2/3 pin 5 Amps, 230 Volts complete all as specified and as directed.

Supply and fix socket outlet flush type multipurpose 2/3 pin 5 amps, 230 volts complete all as specified and as directed.

Supply and fix switch socket combination flush type multipurpose 5 in 1, 5/16 Amps, 230 Volts complete all as specified and as directed.

Supply and fixix ceiling fan regulator step type AC 240 volt suitable for 1200/1400 mm sweep complete all as specified and as directed.

Supply and fix bell ding dong working on 230 volts AC Supply complete all as specified and as directed.

Supply and fix ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified.

Supply and fix switch piano type single pole one way flush type 15 Amps capacity 230 volts complete all as specified and as directed.

Supply and fix sheet metal enclosure vertical type MCB DB TPN 4 way double door with 200 Amps rated bus bar 415 volts suitable for and including 63 Amps TPN MCCB 16 KA as incommer and 12 Outgoing SP MCB's with magnetic locking system complete all as specified and as directed. Note:- MCB SP Shall be measured and paid seperately.

Supply and fix sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified and as directed.

Supply and fix MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and as directed

Supply and fix MCB SPN 230V suitable for fixing on MCB DB of capacity 40 Amps complete all as specified and as directed

Supply and fix wall mounted box type LED of 20 watt with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor multistranded three core of suitable length & size from fitting to the ceiling rose complete all as specified and as directed. Make : -Havells Cat No. REGALBATTEN8UPTO1X22WSSBSWH AND CRYSTAL 1213T8DSTL20WLED865SGLASS/LUKAR CAT NO. LLTS1 or equivalent make as specified here-in-after.

Supply and fix lamp holder insulated body surface bakelite including LED lamp of 7 watt with back plate suitable for angle/batten fittings fixed with PVC round blocks complete all as specified and as directed.

Supply and fix wall mounted LED batten of 09/10 watt with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified and as directed Make : -Havells CAT NO. LHEXACP5IN1W010 or equivalent make as specified here-in-after.

M & L for concealed Submain wiring with two single core 4 Sq mm PVC insulated cable FRLS type copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running up of 4 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M & L for concealed Submain wiring with two run two core 6 Sq mm PVC insulated FRLS copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC concealed conduit and conduit accessories of 25 mm dia medium grade including running up of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M & L for concealed Submain wiring with two run of single core 10 Sq mm PVC insulated cable FRLS type copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running up of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:- Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe med grade 15mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe med grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade.

Disconnecting and removing ceiling fan of 1200/1400 mm sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants including reassembling, including replacement of wornout/defective parts, capacitor 2.5 mfd capacity 240 volts, sealed ball bearing, rubber bushes and refixing in original position including minor repairs, for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc & testing complete and following items changed in place of unservericeable parts including Material and labour for rewinding of the ceiling fan complete with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer's design and instructions including varnishing for ceiling fan of any make and any sweep complete all as specified and directed including taking out burnt copper wire. Note: -old winding material is property of the contractor

Supply and fix 10 watt bulk head luminaire suitable for outdoor with high brightness giving glare free light and complete all as specified and as directed. Makes:- Havells Cat No. HEXAFT10WLED857SSYMBOPC or equivalent make as pecified here in after

Supply and fix Security Lights of 1x25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box including provn of bracket made out of GI pipe of suitable dia not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and as directed Make:- Havells Cat No. ENDURASUNDOWNSL25WLED765S PASYBOPCIHD or equivalent make as sepecified here-in-after.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed

Provn of cable TV socket outlet point including conduit 20mm dia upto 15m long to reach out the intake point complete all as specified and as directed.

Supply and fix down rods of 20mm dia including threads length complete suitable for ceiling fans of size 1200 mm sweep including clamps, nut & bolts as specified and as per site requirement.

Supply & fix Exhaust fan metal body with louvers of 225 mm sweep and connecting up with PVC insulated copper conductor multistranded cable of suitable size and specification as provided by the manufacturer/company from ceiling rose to connector complete all as specified and as directed

M&L for cutting of wall in round shape using machine cutting only and making opening,at any height, fixing of suitable premoulded block of required suitable for mounting of 225 mm dia exhaust fan including wire mesh and making good the disturbed surfaces,plastering,matching with existing colour along with hole size matching with existing colour and clearing all debris and making the work area clean complete all as specified and as directed .Note:The quoted rate includes for all/any number of openings required at any place for proper ventilation of the site.

SAI RUPA CONSTRUCTIONS

BEEGEE DESIGN SYSTEMS

LAKSHMI ENGINEERS