Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.2 LAccepted-AOC | L1 | Accepted-AOC Awarded as a lowest (L1) | |
| 2 | L2₹25.1 L+₹1.9 L (8.15%)Rejected-AOC PURSHOTAM PLAZA 4TH FLOOR OFFICE NO 3 2 9 AND 2 5 BANER ROAD BANER PUNE 411045 | PUNE | PUNE | MAHARASHTRA | 411045 | L2 | Rejected-AOC Being second lowest | |
| 3 | L3₹26.4 L+₹3.2 L (13.7%)Rejected-AOC S 15 SACRED WORLD OPP SACRED HEART TOWN WANWADI PUNE 411040 | PUNE | MAHARASHTRA | 411040 | L3 | Rejected-AOC Being third lowest | |
| 4 | L4₹30.6 L+₹7.4 L (31.8%)Rejected-AOC | L4 | Rejected-AOC Being fourth lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
3 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GERD PASHAN PUNE
GERD PASHAN PUNE
REPAIRS TO INTERNAL AND PERIMETER ROADS AT HEMRL SUTARWADI UNDER AGE BR PASHAN
2022_MES_555919_1
GERD/PSN/TOKEN/30 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GERD PASHAN PUNE
As per tender documents
9 documents required · 9 mandatory
₹500
GERD PASHAN PUNE
₹60,000
Yes
3 Dec 2022
4 Oct 2022
7 Nov 2022
5 Oct 2022
3 Nov 2022
20 Oct 2022
5 Oct 2022 - 19 Oct 2022
Amount
Repair to pot holes not exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken in roads, paths etc cutting around edges to at least 25mm in depth, making good by applying tack coat using paving bitumen @ 5 kg/10 Sqm putting in pre-mixed bituminous macadam, well rammed sealed with binder with paving bitumen grade VG -30 9.80 Kg per 10 Sqm blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadum binder and chipps) and depth of pot holes exc 30mm complete all as specified and directed by Engineer -in-Charge.
Material and labour for scarifying or picking gravelled macadam or bituminous macadam surfaces, exceeding 50mm but not exc 100mm depth,area not exc 400 Sqm. complete all as specified and directed by Engineer in Charge.
Material and labour for Water bound macadam 75mm thick compacted thickness in single layer , with broken stone garading 3, 50 mm to 20mm size, spread, rolled and consolidated to gradient and camber required including necessary lateral support and formwork if required, using curshed stone coarse aggregate (grantie / trap / basalt) and well rammed and rolled using 8 to 12 tonne power roller, complete all as specified and directed.
Material and labour for preparation of unsurfaced water bound macadam surfaces with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bag to remove all loose dirt etc, and including applying evenly a priming / tack coat with paving bitumen of grade VG-10 at the rate of 10kg per 10 sq.m, complete all as specified and as directed.
Material and labour for Premix bituminious macadam binder content 4% paving bitumen laid /rolled and compacted to required gradient and camber consolidated /compacted thickness n. exc 50 mm complete all as specified and as directed.
Material and labour for applying evenly a priming/tack coat with paving bitumen (VG-10 grade) @10Kg/10Sqm with mechanical sprayer on black top surfaces complete all as specified and directed.
Preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dust & dirt etc. including draining off water if any from pot holes, complete all as specified and directed.
Material and labour for applying evenly a priming/tack coat with paving bitumen (VG-10 grade) @5Kg/10Sqm with mechanical sprayer on black top surfaces complete all as specified and directed.
Material and labour for premixed semi dense asphaltic concrete 30mm thick consolidated thickness, using combined graded aggregate i.e. crushed stone coarse aggregate, fine aggregate (sand) & filler (inherent filler/OPC 43 grade cement) of physical properties as specified and as per table given (to refer SSR Part-I of 2020), pre-heated mixed with 5.5% binder content by weight of total mix using VG-30 grade bitumen, laid with mechanical paver, rolled & compacted to a uniform smooth surface with 8 to 10 tonne power road roller, complete all as specified and directed. Notes:- (i) Thickness of semi dense asphaltic concrete and quantities of materials as mentioned in particular specifications/SSR are the minimum. The quoted rate shall also be deemed to include for provision of more materials in comparison to those mentioned/specified in the item, if required, to achieve the required level, gradient, camber and shape all as directed by the GE. (ii) Hot mix plant of adequate capacity shall be used for heating and mixing stone and fine aggregate and binder (bitumen) and semi dense asphaltic concrete shall be laid in single layer with self propelled mechanical paver all as directed by the GE. (iii) Contractor’s quoted rates shall be deemed to include all these aspects.
Material and labour for painting 2mm thick of thermoplast fluorescent paint colour white or golden yellow or any other shade conforming to BS standard 3262 with 20% glass beads (inter mixed) applied hot with automatic(commercial) machine drive in strips after preparation of surfaces as per manufacturer’s instructions & according to the specifications laid down by IRC & MOST (Ministry Of Surface Transport)- Specifications 2001 (4th revision), making lines, broken lines/dashes, arrows etc. on roads and other like surfaces not exceeding 10cm in width or girth, complete all as specified and directed.
Supplying and Fixing in repair Molded Shank Raised Pavement Markers/Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with microprismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTMD4280 Type Handcomplying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97DOIII Dt 11.06.1997. The height, width and length shall not exceed 50mm,100mm and102+/-2mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35+/-5 degree. The strength of detachment of the integrated cylindrical shanks (of diameter not less than 19+/-2mm and height not less than30+/-2mm) from the body is to be a minimum value of 500Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as specified and directed by Engineer-in- charge. Note:- 1. Make:- 3M/Tata BP solar/SA traffic safety kolkata/Bons light Pvt Ltd Ahmedabad/Asian controls Mumbai 2. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel to the Engineer-in-charge.
Supply and fixing in repair Aluminum-backed flexible prismatic (AFP) sheeting consisting Yellow colored flexible prismatic sheeting with non-metallic prismatic lens as Retroreflective elements and conforming to ASTMD4956-09 Type VI specification for reboundable Retroreflective sheeting.This flexible prismatic sheeting shall be of 1ft width and laminated at the back with a 50 micron Aluminum (Al) foil with pressure sensitive adhesive and liner. Flexible prismatic sheeting shall have screen printed arrow/ slant line pattern in black color in a continuous roll format all as specified and directed by Engg- in- Charge.The AFP sheeting ,with the liner removed, shall be applied with a neoprene contact adhesive with a Polychloroprene asbase,viscosity of 200-450 cps and solid content of 20-30%.Once applied, the edges of the product shall be sealed all around with a two-part epoxy based structural adhesive and shall be extremely resistant to peel-off. Note 1. Make:- 3M/Tata BP solar/SA traffic safety kolkata/Bons light Pvt Ltd Ahmedabad/Asian controls Mumbai 2. AFP sheeting and flexible prismatic sheeting incorporated should not crack when slowly bent in 1 second time around 1/8 th inch mandrel after being conditioned for 24hr and tested as per section S2.2.2. of ASTMD4956-09.
Supply and Fixing in repair Flexible Median Marker which shall be made of tough, high impact resistant,injection-molded,thermoplastic body with U shape structure with overall height of minimum180mm and shank depth of minimum 30mm and thickness not less than 2mm.The exposed body structure should be cornered rounded for better aesthetics. The plastics used for the molding of the flexible median marker shall have a minimum notched Izod Impact strength value of 4.11 J/cm (@ thickness 3.17mm) at room temperature, tested in accordance with ASTMD 256. The outer part of the body shall have the Abrasion loss not less than 35mm when tested accordance with DIN 53505 and DIN53516 respectively and shall retain atleast 70% of this value when it is subjected to accelerated weathering for 500hrs as per the ASTMG155 standard .The logo of the manufacturer shall be embossed on either side of the body in the injection molding process.-The flexible median marker shall have Ushaped florescent yellow color retro-reflective sheeting with minimum exposed reflective area 285mm². The Flexible Median Marker shall be fixed by a combination of epoxy adhesive and grouting/Drilling as per Engineer IN Charge. Note:- 1. Make:- 3M/Tata BP solar/SA traffic safety kolkata/Bons light Pvt Ltd Ahmedabad/Asian controls Mumbai 2. The reflective sheeting should confirm toType XI Florescent Yellow sheeting as per IRC 672012 and ASTMD 4956-11. The product design has to with stand all natural impacts and should not get damaged if any pedestrian stamp on top of it intentionally or unintentionally. The product should bend upto 90 degree on both sides (becoming completely horizontal), it should be able to take minimum 200 stamping without any significant damage.
Supply and fixing in repair, ABS speed breaker/rubber rubmler of height 50mm and of size 350mmx250mm each in two colours (black & yellow), fixed alternately with reflectors on either side complete fixed with epoxy and bolts 6mm dia, 75mm long fasteners by drilling as per manufacturer's instructions, complete all as specified and directed. Make:- Model No. DA 1005 of dark eye or equivalent in 3M/Tata BP solar/Oscar/Avery dennison alexis/sharp eyez
Providing and fixing retro-reflectorised informatory signboard rectangular / Square in shape having area less than 0.9 One Square Meter made out of 4mm aluminum composite panel with 0.5mm skin thickness on either side bonded with white retroreflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive adhesivere to reflective specified background,border and backside retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on backside with two coats of greys to be enamel paint and supported on one no. mild steel structure complete all as specified and directed. Note : The payment for steel frame work and civil work shall be measured and paid separately in respective items of BOQ
Material and labour for MS steel frame work in repair as in post including cutting to shape as directed, drilling holes, etc. including all necessary drilling, bolting or riveting, etc. and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.
Providing and fixing in repair 24" convex mirror, polycarbonate 24" orange body including MS plate for fixing of convex morror etc. complete all as specified and as directed by Engineer-in-Charge.`
Material and labour for Excavation in post holes (Or similar holes) each not exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceending 25 cm in hard/dense soil complete all as specified and directed.
Material and labour for cement concrete in foundation filling and mass concrete 1:2:4 type B2 using 40 mm graded crushed stone aggregate complete all as specified and directed.
Demolition of cement concrete (unreinforced), in ground floor and paving (below or above ground level), not exceeding 15cm thickness, including removal of rubbish outside MoD land, complete all as specified and directed.
Material and labour for 100mm thick plain cement concrete (1:4:8), type D-2, using 40mm graded crushed stone aggregates, as in sub base, complete all as specified and directed.
Material and labour for factory made, precast concrete, machine pressed, rubber moulded interlocking paver block any shape and size, ISI marked, IS-15658-2006, of 80mm thickness, M-40 Grade, with grey cement and pigment, laid over and incluidng 50mm thick fine sand cushioning and joints filled with fine sand, complete all as specified and directed.
Material and labour for factory made precast rubber moulded chequered cement concrete tiles, size 30cm x 30cm x 22mm to 25mm thick hydraulically pressed, different colours, glossy finished, set jointed in neat cement slurry and pointed with white cement and coloured pigment to match the surface including 20mm thick screed bed, in cement mortar (1:6) , complete all as specified and directed.
Material and labour for 100mm thick Plain Cement Concrete (1:2:4) type B-1 using 20mm grade crushed stone aggregate as in road side interlocking, stops including use and waste necessary form work, complete all as specified and directed.
Material and labour for Factory made, 100mm thick precast kerb stones made of cement concrete (M-20 Design Mix) using 20mm graded crushed stone aggregate, 300mm x 300mm compressed and hydraulically pressed, tapered/curved on one edge at top, laid on edge with and including 15mm thick and 100mm wide bedding layer of sand and pointed in cement mortar (1:4) vertically on sides of paths/road/ , complete all as specified and directed.
Material and labour for applying two coat of exterior water emulsion paint over a coat of primer on newly laid kerb stone surface, complete all as specified and directed.
MOHANLAL MATHRANI CONS. PVT. LTD.
PAVEWAY CONSTRUCTIONS PRIVATE LIMITED
Sunshine Ventures
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .