PROVN OF PATHWAY DOORS AND OTHER CONNECTED WORKS AT AGNIBAAZ OFFRS MESS AND PROVN OF FOOTHPATH IN VARIOUS LOCATION OF NASIRABAD MIL STN UNDER GE NASIRABAD

M&L for 15mm thick cement plaster on fair faces of bricks surfaces or concrete surfaces in CM 1:4 finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 Type B-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed

M & L for preparation of New surfaces of kerb stone and applying two coats of synthetic enamel paint of different colour for neat and smooth finishing complete all as specified and directed.

S & F in 110mm bore PVC pipes single socketed in any length with rubber ring joints below the PCC complete all as specified and directed.

S&F factory made single 30 mm thick extruded WPC (wood polymer composite) solid moulded flush door shutter of 30 mm size comprising of virgin polymer of K-value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (Maximum toxicity index of 12 for 100 gms ) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), Minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class-A category with property of being termite/borer proof, water/moisture proof and fire retardent and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

M&L for fixing hardwood door frame of section 100 mm x 65 mm in masonry/concrete opening including holdfasts,embedding in cement concrete,packing and making good disturbed surfaces complete all as specified and directed.

S & F 300mm long stainless steel,anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.