TENDER FOR COMPREHENSIVE B/R AND E/M REPAIRS TO CERTAIN OTM ACCNS OF ASC AT RIDGE AREA UNDER GE SATWARI

Amount

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water etc all as specified,and removing unserviceable material outside the premises complete all as specified and as directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position ( framed work) complete all as specified and as directed.

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified & as directed.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed By Engr-in-charge.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed By Engr-in-charge.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr complete all as specified and as directed

Demolition of cement concrete (unreinforced) ground floor to 4th floors and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material exc 100 mtr complete all as specified and as directed

Demolition of reinforced cement concrete of any discription ground to 4th floors and removing unserviceable material exc 100 mtr complete all as specified and as directed

Takind down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel complete all as specified and as directed

Takind down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel complete all as specified and as directed

15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and as directed

20 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed

Taking down CI/PVC pipes 100 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc complete all as specified and as directed

Taking down CI/PVC pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc complete all as specified and directed.

UPVC (SWR) Type-B, pipes single socketed, 110 mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

UPVC (SWR) Type-B pipes single socketed, 110 mm dia, in any length with rubber ring joints, Fix to wall complete all as specified and as directed.

UPVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

UPVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, fix to wall complete all as specifie and as directed.

UPVC (SWR) Type-B bends, 75 mm any radius complete all as specified and as directed.

UPVC (SWR) Type-B bends, 110 mm any radius complete all as specified and as directed.

UPVC (SWR) Type-B junction single, 75mm (Single T) equal or unequal complete all as specified and as directed.

UPVC (SWR) Type-B junction single, 110 mm (Single T) equal or unequal complete all as specified and as directed.

UPVC (SWR) Type-B, floor trap, (75mm diameater for outlet in mm), plain with grating including jointing with solvent cement complete all as specified and as directed.

UPVC (SWR)Type-B gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

UPVC (SWR) Type-B vent cowl 75 mm dia complete all as specified and as directed.

UPVC (SWR) Type-B reducers 110 mm dia complete all as specified and as directed.

UPVC (SWR) Type-B branch piece, 110 mmm bore, single (single Y) equal or unequal complete all as specified and as directed.

UPVC (SWR) Type-B branch piece, 75 mmm bore, single (single Y) equal or unequal complete all as specified and as directed.

UPVC (SWR) Type-B 'P’ trap 110 mm, complete all as specified and as directed.

Pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including PCC 1:3:6 as in back fill to chowkats paid separately all as specified and as directed.

Pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including PCC 1:3:6 as in back fill to chowkats paid separately all as specified and as directed.

35 mm thick 2nd class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), complete all as speciied and as directed.

35mm thick 2nd Class hard wood glazed,gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars,stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified and as directed.

Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. Note:- Sampel approved by Engr-in-Charge or GE.

Soild PVC door frame of size 50 mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement in frame at site comlplete as per specification and as directed.

Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats , Piano hinges measured separately complete all as specified and as directed .

Width of flaps (when open) 30 mm heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified and as directed. ( ISI Marked)

18/19 mm thick MDF board as in shutters/shelves etc exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to frame work with leaping (10 to 5 mm thick three side and 20 to 15 mm thick leaping hinge side) around the shutter and fix with screws to etc complete all as specified and as directed.

Butt hinges of mild steel cold rolled medium weight of size 100mm complete all as specified and as directed.

Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified and as directed. (ISI Marked)

Aluminium handles, cast type, anodised Size-150mm, anodised section and fixed complete all as specified and as directed. (ISI Marked)

Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed cpmplete all as specified and as directed.

Aluminium Floor door stopper fixed complete all as specified and as directed.

Aluminium extruded section body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed .

Mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work complete all as specified and as directed.

25mm outer dia stainless steel decorative drapery rod of thickness 20-22 gauge and with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows complete all as specified and as directed. ( Including necessary fittings)

Powder coated aluminium (minimum thickness of powder coating 50 micron ) work for doors,windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make confirming to IS: 733 and IS: 1285 ,fixing with dash fasterners of required dia and size ,including necessary fittings up to gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc Aluminium sections shall be smooth ,rust free,straight,mitred and jointed mechanically wherever required including cleat angle ,Aluminium snap beading for glazing /paneling,C.P brass /Stainless steel screws ,all completes as per architectural drawings and the directions of complete all as specified and as directed Engineer-in -Charge.

Aluminum Power coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 4.0 mm thick coloured/tinted/frosted glass panes including aluminium grill and all necessary fittings and fixtures complete all as specified and as directed Engr-in-charge.

Aluminum Power coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

5.50 mm thick glass sheet ordinary quality Tinted ( approved by Engr-in-Charge/ GE) and glazed in squares, exceeding 0.5 Sqm in each pane complete all as specified and as directed..

4mm thick aluminium composite panel (coloured sheet) and in additional other accessories for fitting complete all as specified and as directed Engr-in-Charge.

Steel window 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm Square bar gril, specing of gril 100 mm center to center and fixing arrangement as per drg No CEPZ/TD-324,325/0 complete all as specified and as directed ( Note:- Gril measured sparely)

Steel Ventilator ( N exc 0.70 Sqm) 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, 10 mm Square bar gril, specing of gril 100 mm center to center and fixing arrangement as per drg No CEPZ/TD-324,325/0 complete all as specified and as directed ( Note:- Gril measured sparely)

Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0 complete all as specified and as directed.

Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and as directed.

3 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, complete all as specified and as directed. Make:Saint Gobain

3 mm thick figured glass, pin head/frosted type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

Galvanised mild wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and as directed.

Galvanised mild wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and as directed.

Bib tap long body 15 mm bore, standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). Complete all as specified and as directed.

Single Lever Basin Mixer without Popup waste with 450mm Long Braided Hoses fancy type complete all as specified and as directed.

CP pillar cock with 450mm long braided hose, 15 mm bore fancy type complete all as specified and directed by Engr-in-charge/ GE.

Angle valve with wall flange , cast copper alloy, chromium plated fency type screwed for 15 mm iron pipe, complete all as specified and as directed.

CP Bib taps,long body, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified and as directed.

Concealed Stop Cock Heavy Body Casted Cap 15 mm completecomplete all as specified and as directed.

Wall Mixer 3-in-1 System with Provision for Both Hand Shower & Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (Without Hand & Overhead Shower) fancy type complete all as specified and as directed.

Angular stop cock with wall flange , cast copper alloy, chromium plated fency type screwed with wall flange sutable for 15 mm iron pipe, complete all as specified and as directed.

Bib Cock with Wall Flange cast copper alloy, chromium plated fency type screwed with wall flange sutable for iron pipe, 15 mm bore complete all as specified and as directed.

Hand Shower 120mm dia Round Shape Multi Flow with Cascade Effect (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified and as directed.

Flexible tube 12 mm dia and 1.5 meater long with CP nuts complete all as specified and as directed.

Sink Cock with Swinging Spout (Wall Mounted Model) with Wall Flange complete all as specified and as directed.

Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

CP soap dish holder complete all as specified and as directed.

Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.", complete all as specified and as directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long . complete all as specified and as directed.

Corner Glass Shelf (with Bracket) complete all as specified and as directed by Engr-in-charge.

450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers (Both Side) Without Nipple (Suitable for Geysers) complete all as specified and as directed.

450mm Long Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Basin Mixers) complete all as specified and as directed.

Overhead Shower 125 mm dia round shape single flow with shower arm , complete all as specified and as directed.

Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set,Cistern fittings, Size: 660 x 365 x 765mm, S Trap-300mm complete all as specified and as directed.

Urinal with complete accessories Set, cp waste cuppling, waste pipe, sprader etc. Size: 375 x 390 x 590mm complete all as specified and as directed.

Under counter basin with fixing accessories set, size: 560 x 470mm, Oval shape, including CP cuppling and PVC waste pipe complete all as specified and as directed.

Wall Hung Basin with Fixing Accessories Set, Size : 510 x 400mm, including cuppling and pvc waste pipe complete all as specified and as directed.

Full pedestal for WHB complete all as specified and as directed.

PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed by Engineer-in-charge.

Vitreous china wash down water closet white colour, Size(520x360x390) with 'S' trap, closed pattern with flat bottom, including seat cover complete all as specified and as directed.

PVC Waste pipe 32mm bore for required length complete with waste coupling complete all as specified and as directed .

PVC Waste pipe, sutable for urinal, 50/40 mm bore for required length complete all as specified and as directed .

16 to 18 mm thick Granite black (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 complete all as specified and as directed by Engr-in-charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Reinforced cement concrete 1:2:4 (20 mm graged aggregate) (nominal mix) as in slabs supported on walls, beams and coloumns and the like slab laid in slops complete all as specified and directed.

Mild steel deformed bars 10 mm dia and over cut to length bent to shape required including cranking hooking ends & binding with and including MS wire (annealed) not ness than 0.9 mm dia etc. complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

PCC 1:2:4 type B 1 using (20 mm graded crushed stone aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles, throating and backfill to chowkats complete all as specified and as directed. Note: Form work required for these items included in the unit rate of this item.

Cromium plated hand shower (health faucet) with 8mm dia 1.20m long flexible tube and wall hook, complete all as specified and as directed.

WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe complete all as specified and as directed.(Rate of including in taking out and removal of old WC seat unhygienic condition)

PVC connection 15 mm x 600 mm including PVC check nut at both ends screwed for iron pipe of 15 mm bore. Make:- Prayag, Cat No:- 323 or equivalent in Essco/Jaquar complete all as specified and as directed.

Dismantling/ disconnecting/ demolition of water storage tank of any type or description (RCC/PVC/Bricks etc) and removing from site or refixing in position complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks of 1000 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified

Stop valves, (sutable for 20 mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. (ISI Marked)

Disconnecting of water tank of 1000 ltr capacity setting aside (or lowering if required) cleaning and removing all scale and dirt etc etc from tanks and from mouths of pipes etc. scrapping silt, scale, fungus with wire brush from water tanks and removing all scale and dirt etc from water tanks and removing water to a distance 50 meters from the building, cleaning the tank with fresh water, cleaning the mouth oh pipe, refixing all G.I fittings and float valve, making functional all out going G.I connections from tanks and float valves and marking the date of cleaning with white paint on tanks for, cleaning and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

Stainless steel lock grating plain/hole size 100 mm dia including embeding in tiles with white cement complete all as specified and as directed.

Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick cement mortar 1:4 complete all as specified and as directed.

Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Description all as item No 110 but as in vertical surfaces dado/skirting over and including a backing coat of cement mortar 1:4, 10 mm thick complete all as specified and as directed.

Vitrified Ceramic(Double Charged) edge cut joint free coloured or printed any shade tiles 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Description all as per serial item No 112 but as in vertical surfaces dado/skirting over a backing coat of cement mortar 1:4, 10 mm thick complete all as specified and as directed.

Machine cut kota stone slab flooring 18-20 mm thick over and including cement screed bed laid and jointed cement screed bed laidand jointed with grey camant slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for tread of staircase over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed

Machine cut kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for risers of staircase over and including 10mm thick fair and even plaster in cement mortar 1:4 after roughing surfaces of old concrete/any type of plaster by picking sweeping down with water to remove dust etc complete all as specified and as directed.

25 mm thick PCC 1:2:4 type B-1 using 12.50 mm graded crushed stone aggregat as in floor finished roughcomplete all as specified and as directed.

Dismantling of ceiling board(Fibre,pulp,,any type of insulation etc) or insulation board / slabs/any thickness including cover fillets complete all as specified and as directed

GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 9 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid including taking down of old us material complete all as specified and directed by Engr-in- Chage.

Sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 610mm x 460mm bowl size 560mm x 410mm x 200mm complete with CP waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge.

Sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. Make: Prayag, Nirali, Jayana complete all as specified and as directed.

Dismantling of AC or plain or corrugated steel sheeting, any gauge, thickness, including nanital or similar pattern roof covering complete all as specified and as directed.

6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls Fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.

Asbestos cement one piece plain angular ridge 6mm thick complete all as specified and as directed.

Pre- painted galvatume aluminum zinc coating (AZ-150 Micron) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick ( AZ-150 Micron) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240.complete all as specified and as directed.

Mild steel screw bolt (machine made) dia 16 to 20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 22.5cm and n exc 30cm long complete all as specified and as directed.

Second class hard wood timber (framed) scantling fixed , wrought, complete all as specified and as directed.

15 mm thick plaster in cm 1:4 finished fair and even on RCC roof slab ( upto 4th storey building) incl mixing of integral water proofing compound complete all as specified and as directed : Note :- IWPC shall be measured and paid for separately)

Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster / demolition of cement concrete any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove toremove all loose dirt/dust and applying roof treatment as below:-- (i) Applying a coat of bitumen primer membrane 0.4ltr/sqm by the same membrane manufacturer of density at 25 degree C’ 0.87-0.89Kg/Litre and viscosity 70-160 CPS till the surface properly impregnates and insolvent oil primer evaporates completely. (ii) Applying a coat of blown 85/25 graded bitumen confirming to IS 702 @ 1.2 Kg/sqm. (iiI) Applying Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3.6 Kg/Sqm with 160 grams/sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 overlap in length using butane torch with 10cm over laps which shall be thermo fused by flame complete all as specified and as directed.

Applying two coats of aluminium paint over the APP membrane all as specified. All joints and change in direction shall be covered with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement and curved before laying membrane complete all as specified and as directed.

Rendering 15 mm thick in cement mortar 1:6 on other than fair face of brick work/ stone wall surfaces finished even and smooth with out using extra cement complete all as specified and as directed.

Rendering 15 mm thick in cement mortar 1:4 on fair face of brick work/ stone wall surfaces finished even and smooth without using extra cement complete all as specified and as directed. ( incl all necessary scaffolding, lifting arrangement for three story building on external surfaces).

Rendering 05mm thick in cement mortar (1:3) as in ceiling finished even and smooth w/o using extra cement complete all as specified and as directed.

Applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified and as directed.

Applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where requred complete all as specified and as directed

Applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth complete all as specified and as directed.

Applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation and where requered to make surface even and smoothcomplete all as specified and as directed.

Preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of oil bound distemper on old decorated wall surface including necessary filling of wall care putty on uneven surface as and where required complete all as specified and as directed.

Preparation of new plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified and as directed.

Preparation of old plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified and as directed.

Preparation of old decorative plastered/concreat surface of wall, chajja, facia, face of columns, beam ect by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion (APEX) with necessary scaffoding up to 4th storey, including necessary filling of wall care putty on uneven surface as and where required complete all as specified and as directed.

Preparation of new plastered/concrete surfaces of walls, (up to 4th storey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.

Preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces including preparation complete all as specified and as directed.

Preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the Ceiling, pillars, cornices etc. complete all as specified and directed.

Preparation of new wall surface , Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots & rubbing with sand paper and and applying one coat of white wash on ceiling complete all as specified and as directed.

Taking down carefully Copper aluminium point wiring light, Fan, socket or power complete including fixture & fitting such as switches, sockets or power socket complete fitting bracket holder, boards, and making good disturbed surfaces of wall and ceiling etc complete all as specified and as directed.

Taking down carefully unserviceable sub main wiring etc complete all as specified and as directed.

Taking down unserviceable DBs any type / size carefully disconnecting and making good disturbed surfaces complete all as specified and as directed.

Taking down unserviceable MCBS SP/SPN/Isolator etccomplete all as specified and as directed.

Complete point wiring with 1.5 Sqmm single core PVC insulated and sheathed cable 1100 volts, FLRSH grade with multi stranded copper conductor ISI Marked drawn through medium duty PVC concealed conduit fixed to walls /roofs/floors/ceiling etc and including provisons of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to comman earth dolly , including conductor and connected to comman earth dolly,includinng concealed MS box with 3 mm thick laminated sheet cover fixed with brass screws and cup washers for mounting of plate mounting for housing the switches socket outlets , fan regulators etc, all as specified and as directed by Engr-in-Charge for the following :-One light point controlled by one, one way switch 6 Amp complete.

(b) One light point controlled by two way switch complete all as specified and as directed .

(c) One fan/Exhaust fan point controlled by one switch and one regulator complete all as specified and as directed.

(d) One bell/ buzzer point controlled by one, complete all as specified and directed.

(e) One 3 pin switch socket outlet point 5 Amps on independent board complete all as specified and as directed.

(f) One 3 pin switch socket outlet point 5 Amps on same board with other switch complete all as specified and as directed.

All as per item No 153 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 Sqmm size complete all as specified and as directed.

Replacement of point wiring complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit, and matching the white wash colour with existing colour and including terminated into suitable module Modular Metal flush Boxes of Make : Elvira Indoasian or equivalent in List of makes. including white cover plate with frame as per relevant IS for mounting switches, sockets, fan regulators etc complete all as specified and as directed for One light point controlled by one 6 Amps one way switch complete all as specified and as directed.

All as per above serial item No-155 but One ceiling Fan, Exhaust Fan point controlled by one 6 Amps switch complete all as specified and as directed.

All as per above serial item No-155 but One bell/buzzer point controlled by one bell push button on independent complete all as specified and as directed.

All as per above serial item No-155 but One light point controlled by 2 Nos ,6 amps Two way switch complete all as specified and as directed.

All as per serial above item No-155 but One 3 pin socket out let 6 Amp point on independent board complete all as specified and as directed

All as per above serial item No-155 but One 3 Pin socket out let 6 Amp point on the same board with other switch complete all as specified and as directed.

All as per above serial item No-155 but with 2.5 Sqmm cable for 16 Amps switch sockets out let point on independent board including 2.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor complete all as specified and as directed.

Replacement of Switch piano made of polycarbonate flush button single pole one way, 6 Amps, 240 V Make : Anchor PC Penta, Cona or equivalent in LEGRAND complete all as specified and as directed.

Switch piano flush button type , single pole two way 5 Amps complete all as specified and as directed

Replacement of Piano Bell push made of polycarbonate piano flush type 6 amps , 240 V Make : Elvira Indoasian or equivalent in Anchor, Cona, SSK, Legrand complete all as specified and as directed.

Replacement of socket 2-in-1, 5 pin 6 Amps made of polycarbonate flush type complete all as specified and as directed.Make : Anchor PC Penta or Cona, SSK, Legrand complete all as specified and as directed.

Replacement of Socket outlet 3 pin, 15 Amps flush type made of polycarbonate complete all as specified and as directed. Make : Anchor PC Penta or Cona, SSK, Legrand complete all as specified and as directed.

Replacement of Switch piano made of polycarbonate flush button single pole one way, 16 Amps, 230/240 V complete all as specified and directed. Make : Anchor PC Penta or equivalent in List of makes complete all as specified and as directed.

Replacement of Switch modular type of polycarbonate flush button single pole Single module, 6 Amps, 240 V Make : Elvira Indoasian or equivalent in Havells, Legrand complete all as specified and as directed.

Replacement of Switch Modular made of Polycarbonate flush button single pole two way 6 Amps, 240 V.Make : Elvira Indoasian or equivalent in Havells, Legrand complete all as specified and as directed.

Replacement of Switch Modular made of polycarbonate flush button single pole single module, 16 Amps, 230/240 V Make : Elvira Indoasian or equivalent in Havells, Legrand.s complete all as specified and as directed.

Replacement of Bell push modular made of polycarbonate piano flush type 6 amps , 240 V Make : Elvira Indoasian or equivalent in Havells, Legrand complete all as specified and as directed.

Replacement of Socket Modular outlet 2-in-1 5 pin, 6 Amps made of polycarbonate flush type complete all as specified and as directed.Make : Elvira Indoasian or equivalent in Havells, Legrand complete all as specified and as directed.

Replacement of Socket outlet Modular 2-in-1 5 pin, 6 & 16 Amps flush type made of polycarbonate complete all as specified and as directed. Make : Elvira Indoasian or equivalent in Havells, Legrand complete all as specified and as directed.

Ceiling rose ,3 phase ,PVC polycarbonate ,insulated body. Make- Anchor, Philips, Havells complete all as specified and as directed.

Replacement of modular type Fan regulator 2 Module stepped type (electronic) made of polycarbonate for 1200/1400mm sweep AC ceiling fan. Make : Anchor Roma, Havells REO or equivalent in LEGRAND complete all as specified and as directed.

Replacement of fan regulator electronic flush type on the existing phenolic laminated sheet etc 250 volts AC 50 HZ,100 Watts, 4 step complete all as specified and as directed.

Replacement of call bell 240 V, 50 Hz sinlge pole complete all as specified and directed.

Replacement of Ding Dong door bell, AC 230/240 volt single phase complete all as specified and directed.

Replacement of lamp holder pendant/angle type insulated body with back plate complete all as directed and specified by Engineer-in-Charge.

Replacement of LED lamp suitable for B22 holder of capacity 7 Watt complete all as specified and as directed.

Replacement of existing unserviceable T/L fitting on existing wall with New LED Batten for T - 8 LED tube light 18/20 watts with necessary braket,clamps ,incl. bolts, nuts & washers for fixing arrangement etc complete all as specifed and directed by Engineer-in-charge. Make- Crompton /Bajaj /WIPRO

Replacement of LED tube rod light 18/20 watts T -8 with necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge Make- Crompton /Bajaj /WIPRO

Replacement of Recess mounting 2x2 LED luminarie, 36 W deep drawn CRCA housing with high power LED premium white powder coated frame blends seamlessly with ceiling layout, suitable for 600x600 mm modular ceiling grid and also can be suspended with provided kit, complete fitting with all fixing arrangement complete all as specified and directed by Engr-in-Charge. Make- Crompton /Bajaj /WIPRO.

Round shape 9/10 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Replacement of energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed. Make : Havells Cat part No LHEOAOP7UZ6W010 or equivalant in Crompton/ Philips/ Wipro/jaquar

Submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor single core cable , multistranded and including suitable size of PVC Concealed conduit and all accessories fixing on walls / roofs / ceiling etc. earth dolly, terminated in terminal box complete all as specified and directed by Engr-in-charge for 2x4 sq mm and 1x4 Sqmm as earth wire

All as per Srl item No 182 above but 2x6 Sqmm and 1x6 Sqmm as earth wire complete all as specified and as directed

Replacement of Vertical Distribution Board MCB VTPN 4 way double door suitable for and including MCB four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. including taking down old UNSV DB/MCB any type complete all as specified and as directed. Makes: Legrand/IndoAsian Optipro/Schnider Note:- (i). MCBs shall be measured and paid separately. (iii) TPN DB and MCB should be of same make.

Replacement of sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .Make- Legrand / Indo Asian / C&S / Havells complete all as specified and as directed.

Replacement of sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .Make- Legrand / Indo Asian / C&S / Havells complete all as specified and as directed.

Replacement of sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .Make- Legrand / Indo Asian / C&S / Havells complete all as specified and as directed.

Replacement of MCB single pole (SP) 240 volt 06-32 Amp for inductive load connected through cable lugs of suitable size complete all as directed and specified. Make- Legrand / Indo Asian / C&S / Havells complete all as specified and as directed.

Replacement of MCB Single pole and neutral 240 volt 32 Amp for inductive load connected through cable lugs of suitable size complete all as specified and as directed.

Replacement of MCB Single pole and neutral 240 volt 40 Amp for inductive load connected through cable lugs of suitable size complete all as specified and as directed.

Taking down and refixing of Exhaust Fan any size/sweep, including oiling, Greasing and cleaningall complete all as specified and as directed. by Engr-in-charge.

Taking down and refixing of Ceiling fan of any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer complete all as specified and as directed. by Engr-in-charge.

Galvanised steel earthing complete with 60 cm x 60 cm x 6 mm thick galvanised steel earth electrode and 04 mm dia galvanised earth lead wire burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to earth lead 4.0 mm dia GI wire protected by 15 mm bore light grade galvanised iron pipe and other and connected to test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron wire mesh, charcoal and common salt in alternater of 15 cm complete thickness all around the GI plate electrode complete with earth pit PCC 1:3:6 type CI and RCC cover and necesary excavation and earth work in hard/dense soil and disposal of spoil to a distance not exc 50 mtr and necessary testing complete all as shown in electorical plate No 03 connected to earthing test point including following elements/works complete all as specified and as directed.

Srl item No 193 Contd … (e) 15 mm nominal bore light grade GI protection pipe 7.5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of earthing. Note : On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the complete all as specified and as directed. Engineer-in-Charge.

GUPTA CONSTRUCTION

M/S Jasbir Singh

M/S ARUN ANAND