REPAIR RESURFACING OF OTM AND MD ACCN INTERNAL AND MAIN ROAD ALONGWITH ROAD FURNITURE AT TB II AND DUNKIRK LINE AT AGE B/R II UNDER GE (CENTRAL) KHADKI

M&L for Repairs to potholes of any depth,not exc 1Sq m each including sweeping free from dust and mud,or water,scoring sunken surfaces in roads,paths,etc cutting around edges to atleast 25mm in depth,making good by applying tack coat@5kg per 10sq m, putting in premixed bituminous macadam,well rammed and sealed with binder 9.8kg per 10Sq m,blinded with 0.09Cum of stone chippings,6.3mm size and well rammed(including supply of premixed macadam,binder and chipping)depth of potholes exc 30mm complete all as specified & directed by Engineer-in-charge.

Scarifying or picking gravelled,macadam or bituminous macadam surfaces in area n exc 400sqm ,n exc 50mm deep complete all as specified & directed by Engineer-in-charge.

M&L for Preparing unsurfaced WBM/WMM surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc for applying evenly a priming/tack coat with bituminous primer VG 10 @ 7.5 kg per 10 sq m with sprayer over existing surface etc complete all as specified & directed by Engineer-in-charge.

M & L for Premix bituminous macadam(VG-30) with 4% binder content using paving Bitumen) by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified & directed by Engineer-in-charge.

M&L for applying evenly a priming/tack coat with bituminous primer (paving bitumen) VG 10 @ 2.5 kg per 10 sq m with sprayer over bituminous macadam/existing black top surface etc +36 complete all as specified & directed by Engineer-in-charge.

Preparing existing black top surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified & directed by Engineer-in-charge.

M&L for Bituminous premix asphaltic semi dense concrete 30 mm consolidated using paving bitumen any penetration with 5.50% binder content by weight of total mix,rolled and compacted to required camber and gradient, dully rolled and compacted to required camber and gradient with 8-12 tonne power roller and vibrating roller etc complete all as specified & directed by Engineer-in-charge.

M & L for preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified & directed by Engineer-in-charge.

S&F in repair cat eye solar reflective type of metal body alloy of size 100mm x100mm x 20mmwith PAMA striplens reflector of model No. DA972.0 fixed with and incl MS studof suitable size as per manufactures instructions complete all as specified & directed by Engineer-in-charge.

S & F in repair Convex Safety Mirror 80 cms polycarbonate Traffic mirror unbreakable round wide angle Driveway mirror,Red in colour(light weight) with Adjustable Brackets and Nut bolts also including base pole of 7 feet height and 2 inch (50mm) dia for installation the pole fixed with including excavation , PCC 1:3:6 type C1(using 20mm graded stone aggregate) etc for pole complete all as directed. Make:Alcolite MODEL AL 703 complete all as specified & directed by Engineer-in-charge.