Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.2 LAccepted-AOC H NO 411 SECTOR 4 CHANNI HIMMAT JAMMU 180015 J K | JAMMU | JAMMU | J K | 180015 | L1 | Accepted-AOC BEING L1 BIDDER | |
| 2 | L2₹49.5 L+₹1.3 L (2.66%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹49.8 L+₹1.5 L (3.18%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 bidder | |
| 4 | L4₹49.9 L+₹1.7 L (3.57%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 bidder | |
| 5 | L5₹50.5 L+₹2.3 L (4.73%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
14 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 865 EWS
GE 865 EWS PIN-913 865 C/o 56 APO
REPAIR AND MAINTENANCE OF EM INSTALLATION AT SECTOR C AND D UNDER AGE B R I OF GE 865 EWS
2024_MES_676289_1
865/EWS(NIT-72)/2024-25
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE 865 EWS
As per tender documents and as per policy in vogue
9 documents required · 9 mandatory
₹500
Yes
GE 865 EWS
₹98,000
Yes
22 Dec 2024
24 Sept 2024
17 Oct 2024
24 Sept 2024
14 Oct 2024
8 Oct 2024
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing ) and rubbish of premises complete all as specified and directed.
Demolition of cement concrete in ground floor and pavings n'exc 15cm thickness (below or above ground level complete all as specified and as directed).
Demolition of cement concrete in any description and any position not otherwise specifically provided for. complete all as specified and directed.
M & L for 75 mm PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as plinth protection finished even and smooth with out using extra cement, complete all as specified and directed.
M&L Forming Contraction (Dummy) joints 50 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection, complete all as specified and directed.
M & L for 100 mm PCC 1:2:4 type B2 using 40mm graded aggregate as in floor of hard standing finished even and smooth with out using extra cement complete all as specified and directed.
M & L for 75mm PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.
Supply only metalic floor harderner (300gm/Sqm), complete all as specified.
M&L Hardcore with broken stone of gauge n exc 63 mm, deposited, spread and levelled and layer n exc 15 cm thick, water and rolled /rammed to a true surface, complete all as specified and directed.
M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in floor surface of hard standing, complete all as specified and directed.
M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 Sqm and nexc 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match including screed bed with CM (1:6) 15mm thick laying floor tiles complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 and nexc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match including screed bed with CM (1:6) 15mm thick laying floor tiles complete all as specified and directed.
M&L for Glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over and including 10mm thick CM (1:4) in dado/skirting tiles complete all as specified and directed.
M&L for Cement concrete type D-2,1:4:8 (40mm graded crushed stone aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc. complete all as specified and directed.
M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60mm thickiness M-35 grade complete all as specified and as directed by Engr-in-Charge..
M&L sand filling (50 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and as directed .
Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed.
Dismantlng wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton.(Framed work), complete all as specified and directed.
M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed.
M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed.
M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed.
M&L in repair for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.
M&L in repair for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in ceiling panelling, shelves/boarding complete all as specified and as directed.
Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed.
M&L for 15mm thick rendering on other than fair faces of brick works in two layers 10 mm & 5 mm thick using water proofing compound for outer layer of 5mm thick finished even and fair without using extra cement in cement mortar 1:4 complete all as specified and as directed.
Supply only integral liquid water proofing compound complete all as specified and directed.
M&L for 10mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 6 complete all as specified and as directed.
M&L for 5 mm thick rendering on ceiling finished even and smooth without using extra cement in cement mortar 1: 3 complete all as specified and as directed.
M&L for preperation of new plastered wall surface of any description and applying two coat of cement based paint over a coat of chalk whiting complete all as specified and as directed.
M&L for preperation of new concrete /plastered surface of any description,applaying 1 mm to 2mm thick wall care putty and two coat of destemper oil emulsion over a coat of primer complete all as specified and as directed complete all as specified and as directed.
M&L for preperation of new concrete /plastered surface of ceiling, any description, applying three coat of white wash complete all as specified and as directed.
M&L for preperation of new or old untreated wood or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamal paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation new steel surfaces of any description, not otherwise described, over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
M&L for preperation of old wooden wall & ceiling surface surface any description over 10cm in width or girth and applaying one coat of synthetic enamal paint e all as specified and as directed complete all as specified and as directed.
M&L for preperation of old wooden joinery, wall & ceiling surface surface any description over 10cm in width or girth and applaying one coat of synthetic enamal paint all as specified and as directed complete all as specified and as directed.
M&L for preperation of old plastered wall surface of any description and applayng one coat of Oil bound destemper complete all as specified and as directed.
M&L for preperation of old plastered wall surface of any description and applayng one coat of cement based paint complete all as specified and as directed.
M&L for complete removal of existing treatment of ceiling and applayng two coat of white wash complete all as specified and as directed.
Dismantling chain link fencing/expanded metal or mesh not exceeding 4kg/Sqm fixed in steel, wood fillets, concrete post etc. of any description. complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron and flat iron as in post and guard bars or grating complete all as specified and directed.
Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed.
Demolition of stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc and removing demolised material out of Military station all as specified and as directed.
M&l for PCC type D-2(1:4:8) using 40mm graded crushed stone aggregate as mass conc and filling of foundation all as specfed and drected.
M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 all as Specified and directed.
Ditto but except blocks.complete all as specified and directed.
M&L random rubble stone masonary well bonded bedded solidily hearted in CM 1:6. complete all as specified and directed.
All as per item No 46 above but except stones. complete all as specified and directed.
Extra over stone walling for hammer dressing for lime sand store n'exc 40mm deep when held against edge complete all as specified and as directed.
Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards,rails, straining bolts, etc.including provision of binding wire. complete all as specified and directed.
Supply only chain link MS galvanised fencing of size as directed.
S&F MS Wind ties for roof including securing bolts, posts & struts for fencing including cutting tops to shapes as directed,including all necessary drilling,bolting or reveting etc and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.
M & L for Excavating in post holes in so(or similar holes) each n.exc 0.5 cum in hard/dense soil , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm. complete all as specified and directed.
M&L for PCC type C-2, (1:3:6) , using 40mm graded crushed stone aggregate as in lean conc , sub base ,or mass conc , foundation filling etc. complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), all as specified and as directed.
M&L for precast cement concrete type C1, 1:3:6 (20mm graded crushed stone aggregate) in landings, cover slabs (for manholes etc), chullah hoods, chhajja, water troughs, shelves and similar articles with plain faces, setting in CM 1:6, complete all as specified and as directed.
Mild steel TMT bars10mm dia and over (for tie bar of chain link fencing), cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and directed.
S&F MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.
Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed.
S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers in roofs walls etc. with grade of zine coating 275. complete all as specified and directed.
All as item No 59 above but except sheeting. complete all as specified and directed.
S&F Pre painted galvalumealuminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified complete all as specified and directed.
All as item No 61 above but except sheeting any thickness. complete all as specified and directed.
S&F 0.63mm thick plain galvanised mild steel sheeting as in ridges hi, valley gutters drip and straight flashings (length and girth as fixed) with L or J hooks or coach screws with grade of zinc coating 275 complete all as specified and as directed.
Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed.
Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as directed.
Taking down shutters of any description area n'exc 1.0 sqm complete all as directed
Hacking old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed .
M&L sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.
M&L sheet glass 4.8mm thick ordinalry quality and glazing with aluminium beeds in square not exc 0.50 sqm in each pane complete all as specified and as directed
S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete(Glass shall be measured Seperately) all as directed.
S&F for 35mm thick 2nd class soft wood plain framed paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats , complete all as directed .
S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats , complete all as directed.
S&F 2nd class soft wood 35 mm thick Glazed and skelton shutter, open and prapared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately) complete all as specified and as directed.
S&F for 30mm thick 2nd class hard wood plain framed factory made glazed and skeletion window/ventilator shutters , open rebated and prepared to receive glass , gauze etc (without sash bars) edges of framing plain , chamfered or rounded fitted with cut and mitred beds for securing glass etc size of members of shutters as specified in SSR part I, Section 8 , clause 8.24(a) supplied and fitted to chowkats , complete all as directed.
S&F MS framedwork such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.
S&F in repairs Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples. complete all as specified and directed.
S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.
S&F stainless steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.
S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.
S&F mild steel butt hinges, medium weight cold rolled 75mm size complete all as specified and as directed.
S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.
S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.
S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed.
Taking up or down 20 mm bore steel tubing / PPR pipe and connections and set aside for re-use or removal to store. complete all as specified and directed.
All as per Item No 87 above but of 25 or 32 mm dia, complete all as specified and directed.
S & F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge)
Description all as per above item no 89 but 32 mm bore pipe, complete all as specified and directed.
S&F in repair 25mm outer dia PPR Ball valve (Brass insert) confirming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site completely all as specified and directed by the Engr-in-Charge.
Dismantling water tanks and removing to store Exc 250 and n exc 500 ltrs capacity. complete all as specified and directed.
Dismantling water tanks and removing to store Exc 500 and n exc 1000 ltrs capacity. complete all as specified and directed.
S & F 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical, with closed top), hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.
S & F 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical, with closed top), hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.
S & F in repairs Fancy type 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.
S & F in repair 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe. complete all as specified and directed.
S & F in repair fancy type 15 mm bore Stop valves, chromium plated with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specified and directed.
S & F in repairs 750 mm long, 32/ 40 mm dia., PVC Plain Waste pipe for sinks / wash hand basins. complete all as specified and directed.
S & F in repairs, 32mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams) complete all as specified and directed.
S & F in repair Vitreous China wash basin, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe. complete all as specified and directed.
S&F in repairs viterous China squatting pan or Orissa patter 580 x 440 mm white with integral foot rest (excluding cistern) with front or back inlet ant pattern as in repairs incl bedding with PCC type B-I 1:2:4 , using 20 mm graded crushed stone aggregate. complete all as specified and directed.
S&F in repairs, 15mm bore, PVC connection pipe 450 mm long with PTMT nuts at both ends. complete all as specified and directed.
S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified & directed.
S & F in repairs, PVC (SWR) 75 mm dia, floor trap, plain with grating including jointing to waste pipe with solvent cement. complete all as specified and directed.
Schedule of Credit
M/s Aman Enterprises (BID ID -3135859)
SSV Infra (BID ID -3135978)
M.S Sharma Enterprises (BID ID -3138324)
M/s Koul & Sons (BID ID -3137020)
M/S GEE GEE ENTERPRISES (BID ID -3139229)
SHUBHAM ENGINEERS & BUILDERS (BID ID -3138114)
M/S GLOBAL ENGINEERS (BID ID -3138176)
N K BUILDERS (BID ID -3138162)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .