PETTY REPAIRS AND DAY TO DAY COMPLAINTS TO MH, AMC UNIT AND OFFICER MD ACCN UNDER AGE B/R-I OF GE (EAST) JALANDHAR CANTT

Amount

Material and labour for 15 mm thick plaster in cement mortar 1:6 on fair faces brick /concrete surfaces with finished even and smooth without using extra cement in patches n.exc 3 sqm including taking down plaster and racking out joints, hacking for key scrubbing down with water etc including two coats of oil bound distemper including preparation of new surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for 15 mm thick plaster in cement mortar 1:4 on other than fair faces brick /concrete surfaces with finished fair and even without using extra cement in patches n.exc 3 sqm including taking down plaster and racking out joints, hacking for key scrubbing down with water etc including two coats of cement base paint including preparation of new surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for flush pointing in CM 1:3 on roof top of bldg including racking out old pointing including removing vegetation/grass from the roof surface complete all specified

Demolition of brick work built in cement mortar complete all as specified.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified

All as per Srl Item No 5.00 here-in-before but except bricks complete all as specified

Material and labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls in CM 1:4 complete all as specified

Taking down cement plaster on brick/ stone masonary including raking out joints, hacking for scrubbing down with water etc. complete all as specified and as directed.

Material and labour for 15mm thick cement plaster in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

Material and labour for 12mm thick cement plaster in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound emulsion over a coat of primer complete all as specified

Material and labour for preparing newly plastered surfaces of walls and applying two coats of cement base paint on plaster surface complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish outside MD land complete all as specified

Material and labour for vitrified ceramic tiles 10mm thick light shade (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm including 15mm thick screed bedding layer 1:4 CM, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified

Material and labour for vitrified ceramic tiles 10mm thick dark shade (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm including 15mm thick screed bedding layer, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified

Material and labour for vitrified ceramic tiles 10mm thick light shade for (Vertical surfaces) polished area of each tiles not exceeding 0.36 sqm including 10mm thick rendering 1:4 CM layer, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified

Material and labour for non skid ceramic tiles/ non skid tiles coloured, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in dados/ floors including set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified.

Material and labour for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed..

Material and labour for glazed ceramic coloured tiles of size 300 x 200 x 6 to 7 mm thick on vertical surface such as skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed.

Material and labour for Glazed ceramic coloured tiles (premium quality) in vertical surface such as skirting/ dado etc of size 450x300x7mm thick set and jointed in cement slurry and pointed in white or colour cement to match the tiles over and including 10 mm thick plaster in CM 1:4 to receive the tiles complete all as specified and directed.

Material and labour for 20mm thick Granite (of any type) work(table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified

Material and labour for Makrana White Marble work (table rubbed and polished) for wall lining (veneering to wall) 20mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed

Material and labour for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 15mm thick screed bed to floor finishes in CM 1:3 complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below or above ground level) complete all as specified

Material and labour for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor patches upto 5 sqm each, finished even and smooth with using extra cement complete all as specified

Material and labour for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and directed

Material and labour for coloured cement concrete chequered tiles 300x300x22 mm thick with grey cement and pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 20mm thick screed bed to floor finishes in CM 1:6 complete all as specified and directed

Material and labour for sand cushion 25mm thick and well ramming including watering as required complete all as specified and directed.

Material and labour for 60mm thick Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006 of M-35 Grade complete all as specified and as directed.

All as per Srl Item No 29.00 here-in-before but except tile all as specified and directed

Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded stone agg) as in seismic and other similar bands, coping, bed block or similar work including necessary form work complete all as specified.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilliate demolition complete all as specified and directed.

Material and labour for Reinforced cement concrete 1:1 1/2:3 using 20mm graded stone aggregate as in slabs, lintels, beams, in floors, roofs, landing, balconies, canopies, and shelves and the like complete all as specified and directed.

Supply and fixing fair finish form work to sides and soffits of floor or roof beams, beam hunching, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams etc. complete all as specified and directed.

Supply and fixing Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Supply and fixing in repairs 300 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.

Supply and fixing MS 300 mm long mild steel sliding door bolts stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified, fixed in repair complete all as specified

Supply and fixing in repairs continuous (Piano) hinges, mild steel, bright finish or electro galvanised width of flaps 40 mm when open complete all as specified.

Supply and fixing in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

Supply and fixing MS barrel tower bolt, 200mm long stove enamelled black with bright bolt and fixed in repairs complete all as specified and directed

Supply and fixing in repairs 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

Supply and fixing in repairs 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing in repairs 75 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing in repairs mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified.

Supply and fixing in repairs 125 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified.

Supply and fixing in repairs MS pressed handles, oval type, stove enamelled black 125 mm size complete all as specified and directed

Supply and fixing in repairs 40 mm dia powder coated cup board knobs fixed with nut screws and washer of mild steel bright finish powder coated complete all as specified.

Supply and fixing in repairs peg set of 06 Nos mild steel chromium plated 45 cm long fixed with Mild steel screws fixed in repair complete all as specified.

Material and labour for 25 mm dia mild steel pipe curtain rod , powder coated fixed with & including MS powder coated hooks/brackets and decorative finials (at both side), shade as approved by GE complete all as specified including fixing of long size rawl plugs in wall complete all as specified

Material and labour in repair 20mm dia curtain rails , mild steel , chromium plated fixing in cup board with brackets, stops, rollers etc, all as specified

Supply and fixing in repairs curtain brackets suitable for 19/ 25 mm bore curtain rod etc complete all as specified.

Supply and fixing in repair anti dusting rubber beeding for door shutter for anti snakes, dusting etc all as specified

Supply and fixing in repairs floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 60mm complete all as specified

Supply and fixing in repairs 100 mm size Hasp and staple, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws all as specified

Supply and fixing in repair aluminium corrugated nosing strip of as per required size for stair case fixed with screws complete all as specified and directed.

Material and labour for Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete, fixed in repairs, all as specified.

Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads and supply and fix sheet glass ordinary quality 3 mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified

All as per Srl Item No 57.00 here-in-before but exc 0.50 sqm in each pane 4mm thick complete all as specified

Supply and fixing Figured Glass 3.0 mm thick, Pin Head type and glazing with Beads or Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed.

Supply and fixing sheet glass ordinary quality 3.0 mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified

Supply and fixing 5mm thick glass for Aluminium door and windows/ ventilators including Rubber bedding, clipping and other glass fitting complete all as specified and directed

Easening of door exc 1sqm but not exc 2 sqm each by making adjustment to hinges planning the sides of doors including taking down of door and refixing if required complete all as specified

All as per Srl Item No 62.00 above but not exc 1 Sqm each complete all as specified

Petty repairs to PVC door shutter by making minor adjustment to hinges etc easening of shutter including taking down of shutter if required complete all as specified.

Supply and fixing Ist class soft wood plain fillets, Square or rectangular or triangular in section, clean sawn, planed on both sides secured with nails or beads , sectional area exc 3 Sqcm and not exc 6 Sqcm including two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified.

Supply and fixing 2nd class soft wood plain fillets, Square or rectangular or triangular in section, clean sawn, planed on both sides secured with nails or beads, sectional area exc 06 Sqcm and not exc 13 Sqcm including two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified.

Tightening the loose wooden pelmet boxes made out of plywood/ block board with two new 2nd class hard wood plugs (gutties) of size 30 mmx 40 mm long embedded in cement mortar 1:3 and two providing new side MS clips and fixed with MS screws complete, the length of pelmet not exc 1.5 m complete all as specified.

Petty repairs to cup board (kitchen) including easining of cup board shutters including taking down and refixing in position of shutters drawers tightening of piano type hinges fixing of handles etc with drawers adjustment of ball catches etc (one unit shall comprises one cup board irrespectives in numbers of shutters and drawers) complete all as specified.

Petty repair to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable all as specified.

Supply and fixing in repair 9 mm plywood, grade BWR type BB) fixed with screw to timber frame or shutter any thickness complete all as specified.

Supply and fixing in repair 12 mm plywood, grade BWR type BB fixed with screw to timber frame or shutter any thickness complete all as specified.

Taking down aluminium door shutter including floor door closer, removing galss with beading before taking down and refixing of glass, beading and floor door closer after replacing broken parts of aluminium shutter including easing of shutter complete all as specified.

Supply and fixing in repair 18/19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination complete all as specified.

Material and labour in repairs 18/19mm thick block boards, grade 2 quality, exterior grade, commercial type, fixed with screws to timber frame work including two coats of synthetic enamel paint over a coat of pink primer and teak wood leaping all around the edges all as specified.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame), n.exc 1.5 Sqm each complete all as specified

Taking down chowkhats or frame with shutter (without taking off shutter from the frame), exc 1.5 Sqm but not exc 4 sqm each complete all as specified

Taking down shutters of any description exc 1sqm but not exc 2 sqm removing to store complete all as specified

Supply and fixing 35mm thick 2nd class hard wood plain framed factory made panelled shutters with panel of 9 mm BWP commercial veneering on both veneered particle board with commercial veneering on both faces complete all as specified

Supply and fixing 30mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified

Supply and fixing 35mm thick 2nd class hard wood glazed or Skelton shutter factory made open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut and mitered beads for securing glass etc size of member all as per clause 8.24 (a) of SSR Part-I.

Supply and fixing 105 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified

Supply and fixing 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified

Material and labour for preparation of newly wooden based surfaces of any description not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer surfaces complete all as specified and as directed

Material and labour for preparation of newly steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide zinc chrome primer surfaces complete all as specified and as directed

Supply and fixing Factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified , shown on drawing and as directed .

Supply and fixing Solid PVC Door Frame of size 60mm x 30mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified.

Supply and fixing 125 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified.

Supply and fixing 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

Supply and fixing 75mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed for PVC doors complete all as specified

Supply and fixing Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Supply and fixing in repairs 3 mm thick ACP wall panel plain colour PVC sheet fixed in bottom portion of aluminium door shutter complete all as specified and directed.

Supply and fixing cast iron body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified

Petty repairs to leaking bib cock, pillar cocks, Stop cock, angle valve of any description by changing the jumper valve, washers etc and making functional, ensuring proper water supply complete all as specified and directed by Engineer-in-Charge

Petty repairs to leaking low level or high level flushing cistern by adjusting the float valves, internal fittings and including removal and replacement of rubber washer in PVC siphons, leaking PVC bends/GI pipes etc. complete all specified and directed by Engineer-in-Charge

Cleaning of air lock in GI pipe and making the water supply available upto water taps including attending the complaints of no water supply & rectifying defects in water supply lines complete all as specified.

Supply and fixing in repairs 15 mm bore Stop cock standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms). complete all as specified.

Supply and fixing in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified.

Supply and fixing in repair brass chromium plated water jet with flexible tube of suitable length fixed on water closet (English type) complete all as specified.

Supply and fixing in repairs 32 mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified

Supply and fixing in repair 32mm PVC Waste pipe for Wash basin and urinal complete all as specified and directed.

Supply and fixing in repair 125 mm size Brass chromium plated shower roses with swivel joints, including fixing to steel pipe or union complete, fixed all as specified and directed.

Supply and fixing in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.

Supply and fixing in repairs grating doom 100mm dia PTMT (Min weight 25 grms) complete all as specified

Supply and fixing in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specified

Supply and fixing in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

Supply and fixing in repairs vitreous china wash down water closet pan white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe complete complete all as specified and directed.

Supply and fixing in repairs angle iron brackets for WHB & kitchen sink including making good to existing surface including taking down WHB/ Sink and refixing the same complete all as specified.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified.

Supply and fixing galvanised steel water tubes 'medium grade', 15 mm bore, with and including all GI fittings, fixed to walls, ceiling or laid in floors, complete all as specified and directed

Material and labour for refixing of steel old tubing 15 mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified.

Supply and fixing galvanised steel water tubes 'medium grade', 20 mm bore, with and including all GI fittings, fixed to walls, ceiling or laid in floors, complete all as specified and directed

Material and labour for refixing of steel old tubing 20 mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified.

Dismantling of water tanks any type of capacity exc 250 ltrs n.exc500 ltrs and removing to store complete all as specified

Supply and fixing rotational moulded polyethylene water storage tanks, 500 litre capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position including 20mm dia float valve all as specified in SSR Part I, fixed in repairs complete all as specified and directed.

Dismantling of water tanks any type of capacity exc 500 ltrs n.exc1000 ltrs and removing to store complete all as specified

Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litre capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position including 20mm dia float valve all as specified in SSR Part I, fixed in repairs complete all as specified and directed.

Dismantling of water tanks any type of capacity exc 1000 ltrs n.exc 2000 ltrs and removing to store complete all as specified

Supply and fixing rotational moulded polyethylene water storage tanks, 2000 litre capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position including float valve all as specified in SSR Part-I, fixed in repairs complete all as specified and directed.

Supply and fixing in repair 20mm bore PVC ball valve high pressure with epoxy coated aluminium rod & high density polythene float ball and fly nut screwed for iron pipe complete all as specified

Supply and fixing in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified

Supply and fixing in repairs HDPE PVC lid (cover) for 500/1000 ltrs capacity PVC tank complete all as specified.

Cleaning of over head tank RCC / PVC of any description and capacity exceeding 250 ltrs but not exceeding 500 litres, descaling, washing complete with soap solution and removing vegetation around the over head tank/ plate form to the entire satisfaction of Engineer-in-Charge including disconnecting, opening and reconnecting GI tubing & fittings as per site requirement complete all as specified. Note:-Date of Cleaning to be written on the Tank with white Paint.(Size of alphabet 50mm with stencil)

Cleaning of over head tank of any description and capacity exceeding 500 ltrs but not exceeding 1000 litres, descaling, washing complete with soap solution and removing vegetation around the over head tank / plate form including opening and reconnecting with GI tubing as site requirement complete all as specified. Note:-Date of Cleaning to be written on the Tank with white Paint (Size of alphabet 50mm with stencil)

Cleaning of over head tank of any description and capacity exceeding 1000 ltrs but not exceeding 2000 litres, descaling, washing complete with soap solution and removing vegetation around the over head tank / plate form including opening and reconnecting with GI tubing as site requirement complete all as specified. Note:-Date of Cleaning to be written on the Tank with white Paint (Size of alphabet 50mm with stencil)

Supply and fixed in repair brass spindle for pillar cock, stop cock, bib cock & wall mixer cock for 15mm complete all as specified

Supply and fixed in repair brass spindle for pillar cock, stop cock, bib cock & wall mixer cock for 20mm complete all as specified

Supply and fixing CP 15mm dia half turn Knobs for concealed stop cocks, Bib cocks and angle valves complete all as specified and directed

Supply and fixing CP 15mm dia full turn knobs for concealed stop cocks, Bib cocks and angle valves complete all as specified and directed.

Supply and fixing in repairs CI Bends (any radius) diminishing pieces or tappers 75 mm dia complete all as specified.

Supply and fixing in repairs CI Bends (any radius) diminishing pieces or tappers 100mm dia complete all as specified.

Supply and fixing in repairs cast iron spum type pipe 75 mm dia fixed to walls etc complete all as specified.

Supply and fixing in repairs cast iron spum type pipe 100 mm dia fixed to walls etc complete all as specified.

Supply and fixing 110 mm thick PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Supply and fixing 75 mm thick PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Supply and fixing 75 mm dia PVC (SWR) bends any radius complete all as specified and directed

Supply and fixing 110 mm dia PVC (SWR) bends any radius complete all as specified and directed

Supply and fixing in repairs cast iron oval access door plates with nut and washers suitable for 75 mm dia CI waste pipes upto four storey height complete all as specified.

Supply and fixing in repairs cast iron oval access door plates with nut and washers suitable for 100 mm dia CI waste pipes upto four storey height complete all as specified.

Cleaning blockage in rain water pipe by removing the CI grating and rodding etc & removing & cleaning and refixing old CI grating in position in cement mortar 1:6 complete all as specified.

Supply and fixing Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mmx25mm single rebated comprises of glazed shutter EWR Sec 50mm x 20mm and 1mm thick and two openable leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1. Four Nos for each window including following fittings welded to framed shutter complete all as specified:- (a) Holdfasts 150mm long 12mm x 3mm made to shape per window. (b) Handle of Z Sec 20mm x 25mm, 100mm long per leaf. (c) MS tower bolt 150mm long per leaf

All as per Srl Item No. 141.00 here-in-before but without sash bar shutters Note :- wire gauzed shall be measured and paid for separately

All as per Srl Item No. 141.00 here-in-before but fixed type Note :- glass pane shall be measured and paid for separately.

Supply and fixing clean swan Second class soft-wood as in scantlings as in timber framed complete all as specified .

Dismantling wall panneling/ ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

Supply and fixing of Providing and fixing HPSC PVC laminated one side Board 6mm thick in ceiling fixed with as per manufacturers instructions purpose, 60 X 60 cm size fixed with powder coated Gl frame work for ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including necessary GI wire hangers 2mm dia for securing frame work to ceiling, and also including necessary notching complete all as specified and directed

Material and labour for providing and fixing 12mm thick Gypsum board in ceiling fixed with screw as per manufacturer's instructions complete all as specified

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified.

Material and labour for 6mm thick asbestos cement corrugated or semi corrugated sheets in roof walls etc, fixed with L or J type hooks bolts complete all as specified

Supply and fixing pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

Dismantling wrought iron or mild steel work of any description not otherwise provide for complete all as specified

Supply and fixing rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and connecting plates guides for sliding doors; fixed with angle cleats or other running rails all as specified

Supply and fixing Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E-250) complete all as specified and directed.

Supply and fixing in repair, bib taps, brass, fancy type, chromium plated for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

Supply and fixing in repair, bib taps, brass, fancy type, long body, chromium plated for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

Supply and fixing in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms). complete all as specified.

Supply and fixing Angle Valve/ stop valves 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handles, screwed both ends for iron pipes or for unions complete, fixed in repairs, all as specified and directed

Supply and fixing stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed

Supply and fixing in repairs PVC internal fittings for low level flushing cistern complete all as specified.

Supply and fixed in repairs PVC connection 15mm size, 60cm long with PTMT adopter, check nuts and washer on both sides complete all as specified

Supply and fixing in repair brass chromium plated water jet with flexible tube of suitable length fixed on EWC complete all as specified.

Supply and fixing pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed.

Supply and fixing in repairs toilet cabinet made out of white acrylic sheet 1.50 mm thick of size 450 x 300 x 90 mm with looking mirror 450 x 270 mm fixed on the shutter and with suitable shelving arrangement in replacement of existing wooden cabinet/ mirror and repairing the disturbed surface to match with existing complete all as specified.

Supply and fixing in repairs kitchen plate rack made of stainless steel 1mm thick complete size 1200 x 900mm x 200mm width of trade pattern complete all as specified.

Supply and fixing in repair of sinks with draining board made of stainless steel 1mm thick sheet for kitchen with plug washers, waste pipes, cast iron cantilever brackets, connecting union overall size 915mmx 460mm with bowl size 410x330x160mm, including bedding in cement mortar and connecting unions to pipe complete all as directed.

Supply and fixing in repair stainless steel sink 1mm thick without drainage board for kitchen with plug, waste pipe, washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495x420mm with bowl size 410x330x160mm complete all as specified

Supply and fixing in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed

Supply and fixing chromium plated brass WHB mixer fancy type swan neck long nose- screwed down high pressure with or without lettered hot and cold and flynuts 15 mm dia complete all as specified and directed.

Supply and fixing in repairs fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with provision for both hand shower & overhead shower with & including hand shower ( health faucet) ABS body including 8 mm dia flexible tube 1 mtr long & wall hook complete all as specified.

Supply and fixing Chromium plated health faucet for EWC with 1 m long CP tube with CP wall hook superior quality all as specified

Supply and fixing in repairs GI fittings like socket elbow, tee, nipple etc suitable for 15mm bore pipe complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in repairs GI fittings like socket elbow, tee, nipple etc suitable for 20mm bore pipe complete all as specified and directed by the Engineer-in-Charge.

Supply and fixed in repairs GI union socket suitable for 15mm bore dia pipe all as specified & directed

Supply and fixing in repairs GI union socket suitable for 20mm bore dia pipe all as specified and directed

Supply and fixing hollow PVC Wall Lining consisting of 5mm thick single side prelam wood grain printed PVC sheet inclusive frame complete all as specified and directed.

Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified

Material and labour for providing 35mm thick (Measured solid) Precast Cement concrete louvers and jallies in PCC (1:2:4), type B-0 (using 12.5mm graded stone aggregate) including all mouldings but (excluding frames), set in cement mortar (1:4) complete all as specified and directed

Supply and fixing plastic seat cover white for water closet pedestal pattern closed patter with flat bottom fixed with mild steel chromium plated or aluminium hinging device complete all as specified.

Supply and fixing in repairs PVC bend for low level flushing cistern complete all as specified.

Supply and fixing in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by the Engineer-in-Charge

Supply and fixing in repair Tubular towel rail 20mm dia brass chromium plated complete all as specified.

Supply and fixing in repair Soap dish, vitreous China white, approx. complete all as specified.

Supply and fixing in repair ,one piece closet with integrated cistern with soft close, including suitable seat cover and twin flush fittings of any colour, complete all as specified and directed.

KAMAL AGGARWAL (BID ID -3068084)

M/S RAJESH CONSTRUCTION COMPANY (BID ID -3057224)

M/S Vinod Kumar (BID ID -3061387)