SITC of Air conditioning Works.

Amount

Supply & Delivery of Microprocessor based air cooled 11.0 TR celling suspended non -inverter ductabte type Split Air Conditioner having nominal cooling capacity of 132000 BTU/hr. CFM-4400, at ISI condition suitable for operation on 415V .. 5% - 50 Hz. - 3Ph AC supply Each unit consist of two nos scroll compressor with R-410A/R32/R470C Refrigerant (Twin Circuit). (Make- Bluestar/Voltas/Mitsubishi /Daikin/Carrier/O-General

Supply & Delivery of Microprocessor based air cooled 1.5TR non inverter concealed type Split Air Conditioner having nominal cooling capacity of 18000 BTU/hr, 600CFM, at ISI condition suitable for operation on 220V,+ 5% - 50 Hz -1Ph AC supply & power on self started. Each unit consist of 1No. Rotary compressor & 1 No. IDU with R-410A /R32/R470C Refrigerant. (Make- Bluestar/Voltas/Mitsubishi /Daikin/Carrier/O-General)

Installation testing & commissioning of above 11.0 Ton AC machines at 2nd floor by fixing the indoor with two number 1.2 mt long unequal MS "T" section bar of sizes 80mm X 40mm X 8mm with minimum 8 nos 12 mm X 100mm Stainless Steel Hex Flange Nut Sleeve anchor fastner bolt drilled into the ceilling. The indoor unit suspended from this "T" section support with 6 nos 50mm X 10mm MS flat & 12mm full threaded suspender bolt with double nut & spring washer.

Erection & commissioning charges for 1.5 Tr concealed split airconditiong (both indoor & outdoor unit) with nitrogen flashing, preasure testing including S & F necessary fixing arrangement for IDU

Supply & febrication of MS base structure approximate 1500mm length & 400 mm width made by (63mmx 10mm) MS Flat and 200 mm height made by 6 legs by (75mmx75mm x8mm) MS Angle with necessary welding arran gement, for keeping of 11 TR AC outdoor unit, After making base structure, it fixes on roof with necessary sand cement concrete. Specification of Size (Length): MS Angle: 8.899 kg/Mtr. MS Flat: 4.922 Kg/ Mtr.

Supply and Erection of M.S. Grill Guard made by 20 mm x 5 mm M.S. Flat duly flat welded and fabricated by 6" gap in the side 25 x 25 x 5 mm M.S. angle four side of the grill side duly welded by Co's own tools & tackles, hing 2-Palla door incl S&F of 7 lever Godrej Lock & Key and cutting by gas cutter including S&F of MS wire Net (8 SWG ) with 1"x1" gap to be fixed on grill guard incl painting the holl structure after pre paration by two coat of synthetic enamel paint over one coat of R.O.Primer as per dire ction of the E.I.C. [Size - 4'-6" (L) x 3'-0" (D) x 3'-6" (H) and approx. weight 56 Kg.]

Supply. Installation & commissioning Copper Refrigeration pipe line for Suction (7/8"OD HD mini 1.15 mm thick) line with 9 mm thick Nitrile Rubber Insulation supports & brackets (For 11.0 Tr Ductable split AC) (Make - Ryoku/Nippon)

Supply, installation & commissioning Copper Refrigeration pipe line for liquid (1/4" OD SD mini 1.15 mm thick) line with 9 mm thick nilrlle rubber insulation supports & brackets (For 1.5 Tr Concealed split AC)(Make - Ryoku/Nippon)

Supply, Installation & commissioning Copper Refrigeration pipe line for suction (1/2" OD HD mini.1.15 mm thick) line with 9mm thick Nltrile rubber Insulation,supports & brackets (For both 11 Tr &1.5 Tr AC)(Make - Ryoku/Nippon)

S&L of 1.1 KV grade 7 core 2.5 Sq.mm unarmoured FRLS copper power Cable from IDU to ODU (Make:- Gloster/Polycab/Havells) through PVC pipe on wall by suitable saddle as per direction.

S&L of 1.1 KV Grade 3 core 2.5 Sq.mm unarmoured FRLS copper communication Cable from IDU to ODU (Make:- Gloster/Polycab/Havells) on wall by suitable saddle as per direction.

Supply, lnstallatlon & commissioning PVC Drain pipe llne (25mm OD HD 1 mm thick) with Insulation & supports & brackets (For 1.5Tr & 11.0 Tr Ductable split AC) (Make:-Oriplast /Supreme)

Supply &. fixing of fire retardant non porous double layer flexible connection (CANVAS) between each unit and duct as per direction of E.l.C.

Supply & Fabrication of Sheet metal Supply ducting & Pleanum Chambber complete with supports Hanger etc.of the following as per direction EIC. 22 SWG( Make: Sail/Tata)

S&F of aluminium Powder Coated Grill with VCD Make: Air Kolkata/ Primier/Make:Systemair )

S&F of aluminium Powder Coated Grill without VCD (Make: Air Kolkata/ Primier/Make:Systemair ))

Supply &. fixing of 19 mm thick Foil face Nitrlle rubber thermal insulation on duct complete with all accessories as required (Make- Supreme, K-flex/ Rajco / Royku).as per direction EIC.

Supply & fixing of 19 mm thick Nltrile rubber Accoustlc Insulation Under duct complete with all accessory as required.(Make- Supreme,K-flex/Rajco / Royku)..) as per direction EiC.

Supply & fixing of 22 G GI aerofoil blades type Non Return Dampers complete with linkages, levers, fittings, supports, all accessories any other item required to make the system complete as per direction of E.l.C.

Supplying, fixing, testing & commissioning of fresh air arrangement with volume control damper, bird screen etc. complete as required. (Make: Premier/Dynacraft/System Air)

Supplying,Fitting & fixing In position suspended boxing for return/supply air arrangement for ductlng with frame work of aluminium hollow section of size 50mm x25mm (2.0mm thickness) combined with aluminium corners of size 38mm x 25mm,suspended by aluminium hollow tube section of size 38mm x 25mm, 25mm x 25mm powder coated wall angle with aluminium composit panel of thickness 3.0mm comprising of protective film, polyester coating, primer, aluminium coil, adhesive film, polyethylene core again with one layer adheswe film, aluminium bottom coating and finally service coating as per manufacturer's specification finished with aluminium screw and silicon sealent Including suitable arrangement for grill fixing complete In all respect as per direction or EIC.(ACP make Aludecor /Armstrong OD type)

Charges for Civil Work like Wall cutting & finishing as per direction or EIC. The Agency must procure the materials from the Manufacturer/OEM or from their authorized sales channel so that the standard warranty/supprot or the Man ufacturer/OEM becomes applicable to the products to be delivered and Installed by them. Documents that authen ticates such procurement from the Manufacturer/OEM or from their authorized sales channel and standard warranty/support should be sent from the e-mail of the Manufacturer/OEM/authorized sales channel to the e-mail of Engineer-in Charge and hard copy of it to be submitted during execution of work/submission of bill. If any refurbished material is supplied and Installed, penal action will be taken as per existing rules.

TERMS & CONDITIONS :- The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/ submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Defect Liabibility Period 1 (One) year

Make & model of each and every material to be approved by EIC

TRANSTECH (BID ID -5595339)

RAMKRISHNA ELECTRONICS (BID ID -5566031)