Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAdmitted-Finance | ₹1.7 L | L1 | Admitted-Finance |
| 2 | L2₹1.8 L+₹14,500 (8.55%)Admitted-Finance | ₹1.8 L+₹14,500 (8.55%) | L2 | Admitted-Finance |
| 3 | L3₹1.9 L+₹23,000 (13.6%)Admitted-Finance | ₹1.9 L+₹23,000 (13.6%) | L3 | Admitted-Finance |
| 4 | L4₹1.9 L+₹24,400 (14.4%)Admitted-Finance 24A LAJPAT NAGAR NEAR BUS STAND YAMUNA NAGAR | YAMUNANAGAR | HARYANA | 133103 | ₹1.9 L+₹24,400 (14.4%) | L4 | Admitted-Finance |
| 5 | L5₹2.5 L+₹82,400 (48.6%)Admitted-Finance | ₹2.5 L+₹82,400 (48.6%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s Neha Creations L3 | MEERUT GYM AND GYMNASTIC WORKS L2 | V R ENTERPRISES L5 | Radhey Mohan International L7 | Khalsa Exports Private Limited L4 | Radhika enterprises L6 | swing craft L1 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Providing designing and fixing of Air Walker of following specifications:- Size: 1070*460*1360mm
Main Post: 140 mm dia and 4.0mm thick
Other Pipes: 88mm dia 3.0 mm thick
Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury.
Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover | 1 | job | 23,500 ₹23,500 | 23,000 ₹23,000 | 31,200 ₹31,200 | 44,500 ₹44,500 | 23,150 ₹23,150 | 33,900 ₹33,900 | 19,900 ₹19,900 Lowest |
| 2.00 | Providing designing and fixing of Horse Rider of following specifications:- Size: 1100 x 550 x 1480mm
Main Post: 140 mm dia and 4.0mm thick
Other Pipes: 60mm dia 3.0 mm thick
Material:Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 1 | job | 23,500 ₹23,500 | 23,000 ₹23,000 | 31,400 ₹31,400 | 42,000 ₹42,000 | 23,000 ₹23,000 | 33,900 ₹33,900 | 22,900 ₹22,900 Lowest |
| 3.00 | Providing designing and fixing of Arm Wheel of following specifications:- Size: 840*640*1650mm
Main Post: 140 mm dia and 4.0mm thick
Other Pipes: 88mm dia 3.0 mm thick
Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 1 | job | 23,500 ₹23,500 | 23,000 ₹23,000 | 31,700 ₹31,700 | 42,000 ₹42,000 | 21,250 ₹21,250 | 33,900 ₹33,900 | 19,500 ₹19,500 Lowest |
| 4.00 | Providing designing and fixing of Waist Trainer of following specifications:- Size: 1340*1200*1240mm
Main Post: 140 mm dia and 4.0mm thick
Other Pipes: 33mm dia 3.0 mm thick
Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 1 | job | 24,000 ₹24,000 | 23,000 ₹23,000 | 31,700 ₹31,700 | 42,000 ₹42,000 | 26,600 ₹26,600 | 33,900 ₹33,900 | 19,900 ₹19,900 Lowest |
| 5.00 | Providing designing and fixing of Exercise bike of following specifications:- Size: 870*600*980mm
Main Post: 140 mm dia and 4.0mm thick
Other Pipes: 60mm dia 3.0 mm thick
Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 1 | job | 23,500 ₹23,500 | 23,000 ₹23,000 | 30,900 ₹30,900 | 42,500 ₹42,500 | 21,350 ₹21,350 | 33,900 ₹33,900 | 20,000 ₹20,000 Lowest |
| 6.00 | Providing designing and fixing of Knee-Joint Trainer of following specifications:- Size: 730*1000*1038 mm
Main Post: 140 mm dia and 4.0mm thick
Other Pipes: 60mm dia 3.0 mm thick
Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 1 | job | 25,500 ₹25,500 | 23,000 ₹23,000 | 31,900 ₹31,900 | 38,500 ₹38,500 | 22,650 ₹22,650 | 33,900 ₹33,900 | 20,900 ₹20,900 Lowest |
| 7.00 | Providing designing and fixing of Surfing Board of following specifications:- Size: 1440*749*1405mm
Main Post: 140 mm dia and 4.0mm thick
Other Pipes: 60mm dia 3.0 mm thick
Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover | 1 | job | 24,500 ₹24,500 | 23,000 ₹23,000 Lowest | 31,400 ₹31,400 | 45,000 ₹45,000 | 31,800 ₹31,800 | 33,900 ₹33,900 | 24,900 ₹24,900 |
| 8.00 | Providing designing and fixing of Sit-up-Board of following specifications:- Size: 1490*1880*715 mm
Main Post: 140 mm dia and 4.0mm thick
Other Pipes: 60mm dia 3.0 mm thick
Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover | 1 | job | 24,500 ₹24,500 | 23,000 ₹23,000 | 31,700 ₹31,700 | 42,000 ₹42,000 | 24,100 ₹24,100 | 33,900 ₹33,900 | 21,500 ₹21,500 Lowest |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
30 Dec 2020, 3:00 pmClosed
Executive Engineer, Projects Division, JMC
JMC ,TOWN HALL
Providing/Supplying, Designing and Fixing/Installation of Open GYM Equipments/items in 25 Wards within the jurisdiction of Jammu Municipal Corporation
2020_HAUDD_111065_1
e-NIT No 13P of 2020-21
Open Tender
Civil Works
Item Rate
180 days
Jammu
AS PER THE ISSUED/SIGNED NIT AND RATE LIST
2 documents required · 2 mandatory
₹5,000
Yes
Chief Accounts Officer,JMC
₹1 L
Yes
JMC ,TOWN HALL
21 Jan 2021
9 Dec 2020
1 Jan 2021
9 Dec 2020
30 Dec 2020
9 Dec 2020
17 Dec 2020
Amount
Providing designing and fixing of Air Walker of following specifications:- Size: 1070*460*1360mm Main Post: 140 mm dia and 4.0mm thick Other Pipes: 88mm dia 3.0 mm thick Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover
Providing designing and fixing of Horse Rider of following specifications:- Size: 1100 x 550 x 1480mm Main Post: 140 mm dia and 4.0mm thick Other Pipes: 60mm dia 3.0 mm thick Material:Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
Providing designing and fixing of Arm Wheel of following specifications:- Size: 840*640*1650mm Main Post: 140 mm dia and 4.0mm thick Other Pipes: 88mm dia 3.0 mm thick Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
Providing designing and fixing of Waist Trainer of following specifications:- Size: 1340*1200*1240mm Main Post: 140 mm dia and 4.0mm thick Other Pipes: 33mm dia 3.0 mm thick Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
Providing designing and fixing of Exercise bike of following specifications:- Size: 870*600*980mm Main Post: 140 mm dia and 4.0mm thick Other Pipes: 60mm dia 3.0 mm thick Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
Providing designing and fixing of Knee-Joint Trainer of following specifications:- Size: 730*1000*1038 mm Main Post: 140 mm dia and 4.0mm thick Other Pipes: 60mm dia 3.0 mm thick Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self-lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
Providing designing and fixing of Surfing Board of following specifications:- Size: 1440*749*1405mm Main Post: 140 mm dia and 4.0mm thick Other Pipes: 60mm dia 3.0 mm thick Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover
Providing designing and fixing of Sit-up-Board of following specifications:- Size: 1490*1880*715 mm Main Post: 140 mm dia and 4.0mm thick Other Pipes: 60mm dia 3.0 mm thick Material: Carbon Steel pipe and powder coated 80-120 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 8mm thickness, UV resistant and colour. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments duly oil sealed and self lubricated. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-20 laid over PCC & Reinforcement Mesh as per drawing and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover
MEERUT GYM AND GYMNASTIC WORKS
M/s Neha Creations
Khalsa Exports Private Limited
V R ENTERPRISES
Radhika enterprises
Radhey Mohan International
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .