COAL CRUSHER FOR OUTPUT SIZE - 50MM, JAW CRUSHER - Single toggle Jaw | Confirming to Latest version of IS 436 Part 1/ Section1. Feed size- less than 250mm coal/ shale/ coal bearing stone. Product size- less than 50 mm. Capacity- 1000-1050 Kg/ hour approx. Jaw gap adjustment between 40mm and 60mm. Body, Bearing house, swing jaw holder, V-pulley & Fly wheel Guard-made of steel fabricated. Fly wheel, V-pulley, Toggle plate-made of C.I. as per IS 210, FG-200 or above. Eccentric shaft-made of EN-8 or superior. Jaw plate made of manganese steel as per IS-276, GR-1 or superior with test certificate - two 02 sets, one fitted with machine and one spare set with each machine. All shafts must be fitted on suitable roller/ ball bearing of specified make SKF and toggle plate should be mounted on eccentric shaft with gun metal/ material superior that gun metal bushing. One set of final output sample collection unit. System should be designed in such a way that collection of smallest sample 50 KG is possible without loss and all crushing parts can be cleaned easily after processing of each sample without tools. V-belt complete set, make- Fenner. Motor-3 phase, 415V, make- Crompton/ ABB with Fully automatic suitable starter, make- L&T/ Siemens. Protection when any unbreakable material gets into feed |