Repair/maint of security/street light, timer panel and allied works at Zone A at Mil Stn Gaya

Amount

Comprehensive maintenance of security/street/flood light fittings on pole/wall any wattage/capacity of any description and in any position/location, replacement of unserviceable/damaged/broken parts either in single or in combination, re-assembling the fittings and making the light fittings serviceable, fixing the fittings in position, connecting to electric supply and its testing on installation complete received through day to day compliants. Note : - (a) Either contractor or his Rep shall attend Office of the AGE (E/M) on each Working day between 9.30 AM to 10 AM and shall receive complaint slip. All these complaints shall be rectified/completed by the contractor within a day (24 hrs) (b) In Case of any absence notice in deploying labours or if rectification is not carried out within 24 hrs, Recovery will be affected from the contractor Payment at the rate of double the quoted in BOQ for each day of delay. (c) A Complaint register to this effect (Receipt, time of complaints and disposal thereof) shall be maintained by JE and countersigned by Engr-in-Charge

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr in depth and getting out in loose/soft soil for taking up, laying of pipe line.

Returning, filling in excavated soil including spreading, leveling, watering and well ramming in layers n.exc 25 cm.

Removing surplus soil to a distance n.exc 50 mtr and making good the disturbed surfaces all as specified.

Material and labour Sand cushioning for under ground cable with locally available sand for protection of cable including spreading and consolidations, complete all as specified and directed.

Supply and laying in trenches dry well burnt locally available sub class “B” bricks designation 75 over sand cushioning for protection of cable complete all as per specified and directed.

Taking out unserviceable XLPE cable any type from trenches pole, road, duct etc including necessary joints (u/s) fittings and pipes etc complete all as directed

Supply and laying in trenches/laid in floor/duct/drawn through conduit XLPE insulated PVC bedded armoured heavy duty electric cable 1100V grade with aluminium conductor of cross sectional area 4 Core 10 Sqmm with proper thimbling end to end connection etc complete all as specified and directed by Engr-in-Charge. Make : Havells/Finolex/Polycab

Disconnecting and taking out old existing unserviceable wire and supply & fixing in replacement PVC round insulated and sheathed two core aluminium conductor cable 2.5 Sqmm 1100 volt to be replaced in existing fittings complete all as specified and directed by Engr-in-charge (for street light to junction box/OH conductor). Make : Havells/Finolex/Polycab

S&F in replacement of existing unserviceable light fittings bracket incl FI clamps of any description and in any position and supplying and fixing brackets made out of 40mm dia medium grade GI pipe 1 mtr long bent to shape and size fixed on location using new 30x5mm FI clamps made to shape incl nuts, bolts & washers complete all as specified and directed by Engr-in-charge

S&F GI pipe of light grade 50 mm dia fixed on poles as in protection pipe of required length as per site requirement all as specified and directed using 30x5mm FI clamps made to shape incl nuts, bolts & washers complete all as specified and directed by Engr-in-charge.

S&F GI pipe of light grade 40 mm dia fixed on poles as in protection pipe of required length as per site requirementall as specified and directed using 30x5mm FI clamps made to shape incl nuts, bolts & washers complete all as specified and directed by Engr-in-charge.

Taking down carefully old unserviceable totally burnt street light fittings LED/HPSV/garden light any capacity from existing pole/wall complete all as directed by Engr-in-charge.

Supply and fixing LED street light fitting 72 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary electrical connections from junction box to fitting terminal with 3 core 2.5 sq mm cable complete all as specified and directed by Engr-in-charge. Cat Part No. LSTP-72-CDL-M of crompton of its equivalent in Philips/Havells

Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary electrical connections from junction box to fitting terminal with 3 core 2.5 sq mm cable complete all as specified and directed by Engr-in-charge. Cat Part No. LSTP-90-CDL-M of crompton of its equivalent in Philips/Havells

Supply and fixing LED street light fitting 100 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary electrical connections from junction box to fitting terminal with 3 core 2.5 sq mm cable complete all as specified and directed by Engr-in-charge. Cat Part No. LSTP-100-CDL-M of crompton of its equivalent in Philips/Havells

Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete including necessary electrical connections from junction box to fitting terminal with 3 core 2.5 sq mm cable complete all as specified and whereever directed by Engr-in-charge at high mast poles. Cat Part No. LFLN-120-CDL/60-M of crompton of its equivalent in Philips/Havells

Supply and fixing LED flood light 170 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete including necessary electrical connections from junction box to fitting terminal with 3 core 2.5 sq mm cable complete all as specified and whereever directed by Engr-in-charge at high mast poles. Cat Part No. LFLN-200-CDL/60-M of crompton of its equivalent in Philips/Havells

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complet with 40 mm dia GI Pipe Medium grade 1 mtr length, grouted in floor complete pressure die cast powder coated housing with PC diffuser necessary electric connection and repair of base by PCC all as directed. Cat Part No. LPTH-20-CDL of crompton of its equivalent in Philips/Havells

S&F Replacement of contactor 65 Amps 3 Pole with AC coil type CN 565 T11 cat part No IHPHA065300M of Make : Havells or its equivalent

S&F Replacement of contactor 32 Amps 3 Pole with AC coil type CN 432 T01 cat part No IHPHA032110M of Make : Havells or equivalent

S&F Replacement of street light timer switch 1-16A, 230 Volts all etc complete as specified and directed by Engr-in-charge. Make : Selec/Havells or its equivalent

S&F Replacement of TPN MCB 40 Amps, C Type, Cat Part No DHMGCTNF040 Make : Havells or equivalent

S&F Replacement of TPN MCB 63 Amps, C Type, Cat Part No DHMGCTNF063 Make : Havells or equivalent

M&L Replacement of cable junction box weather proof for outdoor installation with hook out for cable entry of size 200x200x100mm IP-65 mounted on security light pole with suitable 30x5mm FI clamps, nuts, bolts complete all as specified and directed. includes bus bar mounted on hygroscopic insulators , thimble, cable gland, cable connection terminal complete. Make : Hansel/Sintex/legrand

M&L Replacement of street light/flood light driver of 72/90/100/120W as per sample and make as per site requirement all etc complete including taking down from pole and installation at site as shown after making working condition by replacing necessary driver etc complete all as specified and directed by Engr-in-charge.

S&F in replacement of FI clamps for junction box/cable protection pipe with pole as per site requirement using 30x5mm FI clamps made to shape incl nuts, bolts & washers complete all as specified and directed by Engr-in-charge.

M/s Vinay Kumar

MS HARI MOHAN GUPTA