Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.3 LAccepted-AOC MAIN ROAD KHADIA YOGICHAURA DISTT SONEBHADRA KHADIA 231330 UTTARPRADESH | 231330 | ₹3.3 L | L1 | Accepted-AOC Bidder has qualified |
| Sl No | Description | Qty | Unit | Mukta Enterprises L1 |
|---|---|---|---|---|
| 1.00Repairing of 2 no Flender make KZN320 gearboxes of plough feeder installed at CHP Kakri Project (Note- For detailed description please refer to scope of work section of NIT) | ||||
| 2.00 | Dismantling, cleaning, assembly and repair of complete gear box 1.Manpower: Skilled (8 quantity for each) | 16 | Days | 950 ₹15,200 |
| 3.00 | Dismantling, cleaning, assembly and repair of complete gear box 2.Manpower- Unskilled (8 quantity for each) | 16 | Days | 650 ₹10,400 |
| 4.00 | Dismantling, cleaning, assembly and repair of complete gear box 3.Manpower- Highly skilled (2 quantity for each) | 4 | Days | 1,150 ₹4,600 |
| 5.00 | Consumable items i.e. Cotton waste, kerosene oil, chisel, emery paper etc. (1 quantity for each) | 2 | LS | 3,000 ₹6,000 |
| 6.00 | Charges for overhead crane (12 quantity for each) | 24 | HR | 200 ₹4,800 |
| 7.00 | Charges for 02 nos. hydraulic jack (15 quantity for each) | 30 | HR | 200 ₹6,000 |
| 8.00 | Repairing of dust seal cover of Gear Box (1 quantity for each) | 2 | Nos. | 10,000 ₹20,000 |
| 9.00 | Replacement of damaged components: A. Nut-bolt, spring washer (HT grade) (16 quantity for each) | 32 | Nos. | 600 ₹19,200 |
| 10.00 | Replacement of damaged components: B. Oil Seal set of size 180 x 150 x 13 & 60 x 45 x 8 (2 quantity for each) | 4 | Set | 2,000 ₹8,000 |
Tender Value
₹3.0 L
EMD Value
₹3,800
Closing Date
1 Apr 2024, 11:00 amClosed
STAFF OFFICER (ENM), NCL, KAKRI PROJECT
OFFICE OF GENERAL MANAGER, KAKRI PROJECT, SONBHADRA, UP-231224
Repairing of 2 no Flender make KZN320 gearboxes of plough feeder installed at CHP Kakri Project.
2024_NCL_305415_1
NCL/KKR/ENM/Tender/2023-24/522
Open Tender
Miscellaneous Works
30 days
Kakri Project
Please refer Tender documents.
5 documents required · 5 mandatory
₹3,800
Yes
28 Apr 2026
16 Mar 2024
2 Apr 2024
16 Mar 2024
1 Apr 2024
18 Mar 2024
16 Mar 2024 - 23 Mar 2024
Amount
Repairing of 2 no Flender make KZN320 gearboxes of plough feeder installed at CHP Kakri Project (Note- For detailed description please refer to scope of work section of NIT)
Dismantling, cleaning, assembly and repair of complete gear box 1.Manpower: Skilled (8 quantity for each)
Dismantling, cleaning, assembly and repair of complete gear box 2.Manpower- Unskilled (8 quantity for each)
Dismantling, cleaning, assembly and repair of complete gear box 3.Manpower- Highly skilled (2 quantity for each)
Consumable items i.e. Cotton waste, kerosene oil, chisel, emery paper etc. (1 quantity for each)
Charges for overhead crane (12 quantity for each)
Charges for 02 nos. hydraulic jack (15 quantity for each)
Repairing of dust seal cover of Gear Box (1 quantity for each)
Replacement of damaged components: A. Nut-bolt, spring washer (HT grade) (16 quantity for each)
Replacement of damaged components: B. Oil Seal set of size 180 x 150 x 13 & 60 x 45 x 8 (2 quantity for each)
Replacement of damaged components: F. Input Pinion with bevel gear & intermediate (1 quantity for each)
Repairing of worn-out output shaft: I. Under cutting of worn out area by turning on heavy duty lathe machine (10 quantity for each)
Repairing of worn-out output shaft: II. Filling of materials by welding with 680CGS electrodes 2.5mm (1 quantity for each)
Repairing of worn-out output shaft: III. Welding Charges (2 quantity for each)
Repairing of worn-out output shaft: IV. Stress relieving after welding works on electrical furnace (approx. weight of shaft) (120 quantity for each)
Repairing of worn-out output shaft: V. Machining/ turning on heavy duty lathe machine (15 quantity for each)
Repairing of bearing housing on gearbox end of the output shaft. Final finish size of housing bore 270IDx100 width I. Cost of CI machine-able electrodes (8 quantity for each)
Repairing of bearing housing on gearbox end of the output shaft. Final finish size of housing bore 270IDx100 width II. Welding charges (1 quantity for each)
Total impact of GST for the purpose of CTC
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_316459.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.38 MB
BOQ_316459.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
