REPAIR TO MISC B/R ITEMS IN CERTAIN BLDGS IN LIVING IN AT AF STN ADAMPUR

Amount

M&L for PCC type E-2 (1:5:10), using 40 mm graded stone crushed aggregates as in filling & mass concrete, sub base, complete all as specified and directed.

M&L for Reinforced cement concrete (1:2:4) type B-0 (nominal mix) using 20mm graded crushed stone aggregates as in as in shelves / cooking platform and the like including necessary form work etc complete all as specified and directed.

M&L for Brick work using bricks as specified in PS clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified and directed.

M&L for Brick work in half brick thick wall using bricks as specified in PS clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4), complete all as specified and directed.

Factory made 35 mm thick ,2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all all as specified and directed.

Factory made, 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides,ISI marked, complete all as specified and directed.

Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick wood grain colour PVC sheet reinforced with mild steel square tube, suppling & fixing in opening, complete all as specified and directed.

Factory made solid PVC cup board Door frame of size 40mm x 75mm made out of 5mm thick wood grain colour PVC sheet reinforced with mild steel square tube, suppling & fixing in opening, complete all as specified and directed.

M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded wood grain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and wood grain colour PVC sheet for top rail, lock rail and bottom rail, panelling of wood grain colour PVC sheet to be fitted in the MS frame welded / sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement as specified in SSR Part II, complete all all as specified and directed.

S&F, Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2 mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face and 2 mm prelam PVC sheet on back face complete all as shown on drawing and as specified and directed.

S&F, Factory made PVC Cupboard Shutter Flush type of 18-22mm thickness consisting of panel of hollow PVC profile of 12mm x 12mm inserted all around the hollow profile section and insert one 10mmx10mm MS tube in the centre of this section and lipped with 10mm(5mmx2)thick and 12mm wide on stiles and rails using solvent cement.the inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant printed PVC sheet using solvent cement on both the sides of the panel.The front side of the panel visible in the front of the shutter to be edge bonded using 20mmx1mm th PVC leeping on both the edges with locking arrangement of both panels etc complete.

Factory made PVC shelf of 18-22mm thickness consisting of panel of hollow PVC profile of 12mm thickness consisting of M S frame made out of M S tubes of 19 gauge thickness and size of 12mmx12mm inserted all around the hollow profile section and insert one 12mmx12mm M S tube in the center of this section and lipped with 10mm(5mmx2)th and 12mm wide on stiles and rails using solvent cement.The inner panel shall be laminated with 5mm th termite proof water proof and fire retardent plan PVC sheet using solvent cement on both the sides of panel.The front side of the partition visible in the front of the cupboard to be edge bonded using 20mmx1mm th plain PVC Leeping on both edges etc. complete.

S&F, Factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3±0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. complete all as specified and directed..

S&F, Aluminium anodised barrel tower bolt of extruded section 150mm long, ISI marked, complete all as specified.

S&F, Aluminium alloy, anodised, ISI marked sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300 mm long, , complete all as specified.

S&F, Mild steel helical door spring 300mm, ordinary rat tail rod pattern including roller and roller plate ISI marked, complete all as specified.

S&F, Stainless steel butt hinges,100mm long, ISI marked, complete all as specified.

S&F, Stainless steel 100mm size auto soft closing hinges fixed with stainless steel screws, ISI marked complete all as specified.

S&F, Stainless steel handles fabricated type with plate 75 mm long, ISI marked complete all as specified.

S&F, Stainless steel handles fabricated type with plate 125 mm long, ISI marked complete all as specified and directed.

S&F, Double leg aluminium anodised door stopper with rubber foot, ISI marked and fixed to bottom rail of doors with steel screws, IN REPAIRS, complete all as specified and directed.

S&F, Aluminium anodised 100mm size hasp and staple, safty type with mild steel hinge pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F, Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F, Stainless steel conduit, not less than 20 mm bore, cut to size and erected in position as curtain rod on backets, including SS decorative finials & brackets fixed to walls with PVC rawl plugs & SS screws, IN REPAIRS, complete all as specified and directed.

S&F, Rolled mild steel sections as in joist channel, angle, post, strut or Tee section, fixed independently, with base plate, connecting plates (cut to ordinary length i.e within 20mm of length indicated) quality A confirming to grade Fe-290-Gde E-165, complete all as specified.

S&F, Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165,complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F, Factory made steel windows with side hung shutter with glazng bars each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, complete all as specified and directed.

S&F, Factory made steel windows with side hung shutter without glazng bars each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, complete all as specified and directed.

S&F, Steel windows or ventilators, fixed type made of MS sheet 1.25 mm thick box type (primer coated), ERW hollow 'P' section of size 60mm x 25 mm complete all as specified and directed. NOTES APPLICABLE TO SERIAL ITEM NO. 28 TO 30: (a) Profile section used under these items shall be 'P' tube as shown in drawing No. CE/AF/STD-170/07, CE/AF/STD-171/07 and CE/AF/STD-172/07 as applicable.

S&F, Pressed steel frames made out mild steel sheet 1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, 100 mm size butt hinges ISI Marked, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC (1:3:6) type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified for size of frame: -

105 mm x 60 mm

125 mm x 60 mm

S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour hving tensile strength of 550 Mpa as in roof coverng/ cladding to wall/ bent to curve for chajjas, fixed with self tapping screws complete all as specified and directed.

Water Proofing Treatment to RCC roofs comprising of : -

Taking down existing water proofing treatment (any no. of layers) from RCC roofs with brick tile including cleaning the surface including flashings and junction of parapet etc. with wire brushing & water to the entire satisfaction of EIC, complete all as specified.

M&L for PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate, laid to slope as directed by Engineer in Charge over RCC roofs as padding, complete all as specified and directed.

M&L for Rendering 15 mm thick (Average thickness) rendering on roof surface including flashings and junction of parapets etc., finished even and fair in cement mortar (1:4), using water proofing compound as recommended by manufacturers after brushing cement slurry @ 1.20 kg/Sq. m, complete all as specified and directed. NOTE: Supply only WPC will be measured & paid for separately under respective item of BoQ.

M&L for APP based polymeric membrane laid on primed roofs & flashing by forced application using Butane torch and sealing all joints on primed surface by applying hot blown industrial grade bitumen @ 85/25 @ 1.20 kg/Sq.m over a coat of bitumenous primer @ 0.40 litre per square metre over clean RCC/plastered roof surfaces & flashings complete all as specified and directed.

M&L for 40 mm thick brick tiles are bedded over 15 mm thick cement mortar (1:4), and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on APP membrane complete all as specified and directedd.

M&L for Making benching with PCC (1:2:4) type B-0 (using water proofing compound) along side walls adjoining to roofs, in CONCAVE SHAPE, complete all as specified and directed.

Water Proofing Treatment to RCC sunken surfaces comprising of :

M&L for Rendering 15 mm thick (Average thickness) rendering on sunken surfaes including flashings, finished even and fair in cement mortar (1:4), using water proofing compound as per recommended ratio, after brushing cement slurry @ 1.20 kg/Sq. m, complete all as specified and directed. NOTE: Supply only WPC will be measured & paid for separately under respective item of BoQ.

M&L for LDPE sheet 150 micron laid over applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m & adjoining vertical surfaces including applying bitumenous primer @ 0.40 litre per square metre over clean RCC/plastered roof surfaces complete all as specified and directed.

S&F, Galvanised iron tubes 50 mm bore ‘medium grade’, as in spout for sunkun floor, fixed as in wall, inside and fixed with wire netting & bevelled edge at 45 degree, complete all as speciifed and directed.

NOTES FOR SERIAL ITEM NO. 33 & 34: For Guarantee of Water Proofing Treatment refer PS clause 11.5 of CA.

Supply only water proofing compound (WPC), ISI marked, complete all as specified.

M&L for Decorative laminates type I, 0.9-1 mm thick of surface finish, colour and pattern as approved , fixed with approved adhesive complete all as specified and directed.

S&F, uPVC pipes, 160 mm external dia pipe, type-A, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed to wall with PVC brackets as SWR / rain water pipes, IN REPAIR, complete all as specified and directed

S&F, uPVC/PVC bends any radius, suitable for uPVC soil waste discharge pipes 160 mm external dia complete all as specified and directed.

M&L for 25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded crushed stone aggregate, finished rough, as in sub floors or similar locations, complete all as specified and directed.

M&L for 75 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, and joints shall be sealed with joint sealing comound grade 'A' complete all as specified and directed.

M&L for Granite jet black shade, 15-18 mm thick,as in step, jambs, cooking platform and like, machine cut, machine polished, bedded and jointed with grey cement slurry & pointed with grout of matching shade including necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:4), complete all as specified and directed.

M&L for Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified and directed.

M&L for Machine cut Kota stone slab flooring 16-18 mm thick, area of each slab not less than 0.30 sq.m, (cut to size in square shape) laid in floors over & including 20 mm thick (average thickness) cement mortar (1:4) screed and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete, all as specified.

M&L for Kota stone slab 16-18 cm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick (average thickness) cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite finish), complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 7-8mm thick, area of each tile exc. 0.13 Sq.m but n. exc. 0.18 Sq.m, on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in grout of shade matching to tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tile exc. 0.11 Sq.m but n. exc. 0.18 Sq.m laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tile laid over and including 15 mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tile exc. 0.18 Sq.m but n. exc. 0.38 Sq.m laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tile laid over and including 15 mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tile exc. 0.18 Sq.m but n. exc. 0.38 Sq.m laid in skirting dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tile laid over and including 10 mm thick plaste in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified and directed.

M&L for First quality, vitrified ceramic tiles 9-10mm thick (square/ rectangular) area of each tile exc. 0.42 Sq.m but n. exc. 1 Sq.m, laid in floors etc, set and jointed in neat cement slurry and pointed with grout of matching shade of tiles, laid over and including 15 mm thick bedding layer in cement mortar (1:4), complete all as specified and directed.

M&L for First quality, vitrified ceramic tiles 9-10mm thick (square/ rectangular) area of each tile exc. 0.42 Sq.m but n. exc. 1 Sq.m, on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed with grout of matching shade of tiles, laid over and including 10 mm thick bedding layer in cement mortar (1:4), complete all as specified and directed.

M&L for Rendering 5 mm thick on fair faces of concrete surfaces, finished fair and even on ceiling surfaces in cement mortar (1:3), complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6) complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), mixed with water proofing compound as per manufacturers instructions, complete all as specified and directed.

M&L for Repairing of RCC projection chhajjas, roof, facia etc by necessary preparation. Scraping cutting, chiseling derusting and cleaning of exposed reinforcement with antirust zink nich prime solution and a coat of bonding agent, surfaces of damaged, loose RCC with micro concrete 20 to 30mm thick and reinforcement with chicken mesh of weight not more than n.exc 3 kg/Sq.m (if reqd) with or without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches of area n.exc 5 Sq.m and thickness of RCC member n.exc 70 mm incl necessary formwork at any height/location complete all as specified. NOTE: The rate quoted by the contractor shall included for chicken mesh, scaffolding and necessary formwork upto triple storey bldg.

M&L for One coats of interior acrylic distemper on old ceiling surfaces, including preparation of surfaces, complete all as specified and directed.

M&L for Two coats of interior acrylic distemper on new ceiling surfaces, including preparation of surfaces, complete all as specified and directed.

M&L Prepration of new plasterd wall surfaces of any description complete all as specified and directed and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces as specified. (preparatory to paint as directed). (b) Two coats of interior acrylic distemper/oil bound distemper over and including a coat of interior primer complete all as specified and directed.

M&L for Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and directed and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of interior acrylic distemper/oil bound distemper over and including a coat of interior primer complete all as specified and directed.

M&L for Prepration of new plasterd wall surfaces of any description complete all as specified and directed and applying the following: - a) Applying wall care putty, in two coats & smoothening the surfaces as specified. (preparatory to paint as directed).complete all as specified and directed. (b) Two coats of exterior acrylic emulson over and including a coat of water based exterior primer complete all as specified and directed.

M&L for Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and directed and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of exterior acrylic emulsion over and including a coat of water based exterior primer.

NOTES APPLICABLE TO SERIAL ITEM NO. 55 TO 60: (i) Entire quantity of material for this work shall be procured by the contractor from manufacturer's Depot & deposit the same with Enginer-in-Charge and same shall be issued to contractor on daily basis as per consumption at site. (ii) The work shall be got executed through paint manufacturer/ authorised applicators of manufacturer's as specified in relevent PS clause.

S&F, Sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.m in each pane complete all as specified and directed.

S&F, Figured glass pin head type 4 mm thick, and glazing with oil putty or wooden beads in squares n. exc. 0.5sqm in each pane complete all as specified and directed.

M&L for Applying one coat (finishing coat) of synthetic enamel paint, including preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and complete all as specified and directed.

M&L for Two coats of synthetic enamel paint over & including a coat of pink primer over wood and wood (new) based surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces complete all as specified and directed.

M&L for Applying one coat (finishing coat) of synthetic enamel paint including peparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth, complete all as specified and directed.

M&L for Two coats of synthetic enamel paint over & including a coat of red oxide primer over steel & iron (new) surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.

S&F, Steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, including taking up or down steel tubing and connections from existing location, complete all as specified of size: -

15mm bore

20mm bore

32mm bore

50mm bore

100mm bore

S&F, Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete all as specified and directed. MAKE:PRAYAG Cat No. P-6510 or equivalent make mentioned in Appndix 'B'.

S&F, Concealed stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR, complete all as specified and directed. MAKE:PRAYAG Cat No. P-6518 or equivalent make mentioned in Appndix 'B'.

S&F, Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete all as specified and directed. MAKE:PRAYAG Cat No. P-6508 or equivalent make mentioned in Appndix 'B'.

S&F, Center hole basin mixer without pop up, cast copper alloy, chromium plated fancy type, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, complete all as specified and directed. MAKE: PRAYAG Cat No. 6550 or equivalent make mentioned in Appendix 'B'.

S&F, Wall mixer, cast copper alloy chromium plated, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS complete all as specified and directed. MAKE: KEROVIT Cat No. KB511021 or equivalent make mentioned in Appendix 'B'.'.

S&F, 225 mm size overhead ABS shower with cast copper alloy chromium plated arm 225 mm long with flange and fixed in position, IN REPAIR, complete. MAKE: PRAYAG Cat No. BS-76 or equivalent make mentioned in Appndix 'B'.

S&F, Stainless steel towel rail 600 mm long, fixed to wall with SS screws and PVC rawl plugs, IN REPAIR, complete. MAKE: PRAYAG Cat No. BA-10S or equivalent make mentioned in Appndix 'B'.

S&F, 5-6 mm thick looking glass fixed over not less than 6 mm thick PVC ply and approved shade PVC beading not less than 15 mm wide alround with and including all fixing acessories, complete all as specified and directed.

S&F, PVC connections 15 mm size of length 450 mm with PTMT nuts, IN REPAIRS complete all as specified and directed.

S&F, Bathroom mirror Cabinet (PTMT alloy) of size 450 x 350 x 100 mm with SS screws and fixed in position, IN REPAIRS, complete all as specified and directed. MAKE: PRAYAG Cat No. 557 or equivalent make mentioned in Appndix 'B'.

S&F, Corner Glass shelf 300 mm with brass brackets and fixed to wall with chromium plated brass screws and rawl plugs, IN REPAIRS, complete all as specified and directed. MAKE: PRAYAG Cat No. BEA-44 or equivalent make mentioned in Appendix 'B'.

S&F, Stainless steel soap dish, fixed to wall with SS screws and PVC rawl plugs, complete all as specified and directed. MAKE: PRAYAG Cat No. BA-05 or equivalent make mentioned in Appendix 'B'.

S&F, Stainless steel peg set of six, fixed to wall with SS screws and PVC rawl plugs, complete all as specified and directed. MAKE: PRAYAG Cat No. BEA-30 or equivalent make mentioned in Appendix 'B'.

S&F, Stainless steel (304 grade) grating with frame, wih or without hole 100-110 mm size, IN REPLACEMENT, complete all as specified and directed.

S&F, Vitreous China squatting pan 'orissa' pattern, size 580 X440mm white, integral foot rests, including 'P' or 'S' trap and saintary connection socket to fit WC outlet including connection to trap , to flusing pipe, anti syphonage pipe etc complete including making good to floor, IN REPLACEMENT, complete all as specified and directed. MAKE: PRAYAG or equivalent make mentioned in Appndix 'B'

S&F, Vitreous China wash down water closet pan (pedestal pattern), white ISI marked, with & including stainless steel body Jet spray (L-bend) with1.50 metre long braded tube tube, soft close PVC seat & cover and uPVC 'S trap, complete all as specified MAKE OF EWC: PRAYAG Cat No. 4016 or equivalent make mentioned in Appendix 'B'.

S&F, PVC flushing cistern 10 litre capacity, syphonic action type, any shade, dual flush, ISI marked with flush pipe and all fixing acessories, IN REPLACEMENT, complete all as specified and directed. MAKE: PRAYAG Cat No. 502 or equivalent make mentioned in Appndix 'B'

S&F, Vitreous China wash down water closet pan (One piece with cistern), white, ISI marked, with & including Health faust with 1 metre SS tube & hook with PP thin rim seat cover and necessary rag bolts, IN REPAIRS, complete all as specified and directed. MAKE OF EWC: KEROVIT Cat No. KS709 or equivalent make mentioned in Appendix 'B'.

S&F, Vitreous China wash hand basin, counter type, white, oval shape of size 560 x 410 x 180 mm including fixing acessories like 32mm dia CP waste coupling, CP bottle trap & PVC collapsible waste pipe IN REPLACEMENT, complete. MAKE:PRAYAG Cat No. 4790 or equivalent make mentioned in Appndix 'B'.

S&F, Vitreous China wash basin, white, flat back, size 550 x 400 mm, ISI marked, including fixing acessories like rag bolts etc. with CP waste coupling half or full threaded suitable for & including 32 mm size PVC solid waste pipe, IN REPLACEMENT,, complete all as specified and directed. MAKE: PRAYAG Cat No. 4645 or equivalent make mentioned in Appndix 'B'

S&F, Vitreous China half stall Urinal pot, white, size 345 x 320 x 560 mm, with & including cast copper alloy, half or full threaded chromium plated waste coupling suitable for & including 32 mm size PVC waste/discharge pipe, rag bolts, IN REPAIRS, complete all as specified and directed. MAKE OF URINAL: PRAYAG Cat No. 4998 or equivalent make mentioned in Appendix 'B'.

S&F, Flush/ Push cock 32 mm size having discharge capacity of 7 to 10 litres complete all as specified and directed.

S&F, MS bend 32mm dia complete all as specified and as directed.

S&F, Flush cock (lever type) 15 mm size for urinals complete all as specified and directed. MAKE: PRAYAG Cat No. BEA-32 or equivalent make mentioned in Appendix 'B'.

Stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug waste pipe washers including cantilever cast iron brackets connecting union etc overall size 940mm x 460mm x 203 mm with bowl size 354mmx 405mmx 203mm,IN REPLACEMENT complete all as specified and directed. MAKE:PRAYAG Cat No. 1342D or equivalent make mentioned in Appndix 'B'.

S&F, uPVC pipes 75 mm external dia, type-B, ISI marked (IS:13592) single socketed in any length with or without rubber ring joints, fixed under floors/walls as SWR pipes, IN REPAIRS, complete all as specified and directed.

S&F, uPVC pipes 110 mm external dia, type-B, ISI marked (IS:13592) single socketed in any length with or without rubber ring joints, fixed under floors/walls as SWR pipes, IN REPAIRS, complete all as specified and directed.

S&F, uPVC/PVC bend any radius, suitable for uPVC soil waste discharge pipes 75 mm external dia, IN REPAIRS, complete all as specified and directed.

S&F, uPVC/PVC bend any radius, suitable for uPVC soil waste discharge pipes 110 mm external dia, IN REPAIRS, complete all as specified and directed.

S&F, uPVC floor trap, suitable for uPVC soil waste discharge pipes 75 mm ext dia, embedded in PCC type B-1(1:2:4), IN REPAIRS, complete all as specified and directed,

DISMANTLING/DEMOLITION WORKS

Taking down cement plaster of any description on brick walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sq.m each and removing from site all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and removing from site all as specified and directed.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site all as specified and directed.

Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening after easing adjusting and minor REPAIRS complete all as specified and directed.

Dismantling floor, hearth or wall tiling, stone slab(s) including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

Demolition brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified and directed

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided all as specified and directed.

Dismantlig brick tiles in roof laid dry and pointed in cement mortar all as specified and directed.

Demolition of mud phuska in roofs, any thickness including plaster and leeping plaster all as specified and directed.

Dismantling wrought iron or mild steel work of any description, complete all as specified and directed.

NOTE: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline.

M/S GURBACHAN SINGH (BID ID -3265782)

M/s Sahib and Company (BID ID -3270504)

MALHOTRA AND ASSOCIATES (BID ID -3265518)

BHARAT ENTERPRISES (BID ID -3265597)