COMPREHENSIVE MAINT REPAIR TO LEAKAGE SEEPAGE AND SANITARY FITTINGS IN TOILETS BATHROOM AND KITCHEN IN ZONE C AT AF STATION SURATGARH

Amount

BOQ (COMPREHENSIVE MAINT, REPAIR TO LEAKAGE, SEEPAGE AND SANITARY FITTINGS IN TOILETS BATHROOM AND KITCHEN IN ZONE 'C' AT AF STATION SURATGARH)

Demolition of brick work built in cement mortar including all quoins, arches , pillars etc but excluding precast concrete articles, complete all as specified and directed by the Engineer-in-Charge.

M & L, Brick work with sub class 'B' bricks , straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 , complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing ),and removing rubbish off the premises , complete all as specified and directed by Engineer-in-Charge

M&L for First quality glazed ceramic coloured tiles of (450x300mm) x 7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles ,complete all as specified and directed by the Engineer in Charge.

M&L for First quality glazed ceramic coloured tiles of (300x200mm) x 6-7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat slurry and pointed in white or coloured cement to match the shade of tiles ,complete all as specified and directed by the Engineer in Charge.

M&L for First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed by the Engineer in charge.

M&L for First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat slurry and pointed in white or coloured cement to match the shade of tiles ,complete all as specified and directed by the Engineer in Charge.

Taking down cement plaster on brick walls & concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land ,complete all as specified and directed by the Engineer in Charge.

M&L for Rendering 12 mm thick cement plaster in cement mortar (1:6) on fair faces of brick works or concrete surfaces , finished even and smooth without using extra cement , complete all as specified and directed by the Engineer-in-Charge.

M&L for Rendering 5 mm thick on RCC ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement , complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth without using extra cement, complete all as specified & directed by Engineer-in-Charge.

M&L for Preparation of new plastered wall surfaces and applying two coats of exterior acrylic emulsion paint (in camouflage pattern using number of colours) , complete all as specified and directed by the Engineer-in-Charge.

M&L for Preparation of new plastered or un plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of Chalk whitening , complete all as specified and directed by the Engineer-in-Charge

M&L for Preparation of new surfaces of wall including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying three coats of white wash, complete all as specified and directed by Engineer –in-Charge.

M&L for Preparation of new surfaces of ceiling,chajja etc, including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying three coats of white wash, complete all as specified and directed by Engineer –in-Charge.

M&L for Applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns,including preparation over old surfaces, complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15 cm thickness (below or above ground level), including removal of rubbish outside MoD land, complete all as specified and directed by the Engineer in Charge.

M&L for Plain cement concrete type B-1(1:2:4) using 20 mm graded stone aggregates as bed block ,coping , cills, steps etc , complete all as specified and directed by Engineer-in-Charge.

M&L for Plain cement concrete 1:2:4 type B-1(20mm graded stone aggregate) 40 mm thick as flooring finished even & smooth without using extra cement , complete all as specified and directed by Engineer-in-Charge

Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling and floor etc., including cutting/chasing in wall/floor and removal from site, complete all as specified and directed by the Engineer in Charge.

Taking up or down 20 mm bore steel tubing with connections or fittings from wall, ceiling and floor etc., including cutting/chasing in wall/floor and removal from site, complete all as specified and directed by the Engineer in Charge.

S&F Steel water tubes, 15 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed by the Engineer in Charge.

S&F Steel water tubes, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed by the Engineer in Charge.

Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and directed by the Engineer in Charge.

Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and directed by the Engineer in Charge.

S&F in repair Stop valve/Angle valve 15 mm dia cast copper alloy , chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Pillar taps, 15 mm dia cast copper alloy chromium plated fancy type, with capstan heads, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed by the Engineer in Charge.

S&F in repair Bip taps,15 mm dia copper alloy,chromium plated ,fancy type ,screwed down , screwed for iron pipe, complete all as specified and directed by the Engineer in Charge.

S&F in repair Chromium plated brass shower rose 125 mm bore of rim with swivel joint, complete all as specified and directed by Engineer-in-Charge

S&F in repair Wash basins, vitreous china, white, flat back of size 550x400 mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32 mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32 mm dia HDPE waste pipe and including new brackets, complete all as specified and directed by the Engineer in Charge. Make :- CERA/HINDWARE/PARYWARE.

S&F Vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rest (exclusive flusing cistern& flush pipe) including cast iron 'P' or 'S' trap of 100 mm bore pipe fixed in PCC 1:2:4 type B-2 and necessary lime concrete, fixed as in repairs, including making good the surface to match with existing floor finish fixed as in repair ,complete all as specified and directed by the Engineer in Charge. Make :- CERA/HINDWARE/PARYWARE.

S&F PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level fixed in repair , complete all as specified and directed by the Engineer in -Charge

S&F in repair PVC connection of PTMT 15mm size, non corrosive with nuts and washers on both ends,450 mm long, complete all as specified and directed by the Engineer in -Charge

Taking down Chowkhats with shutters (without taking of shutter from the frame) of any description not exceeding 1.50 Sq. m each, and making good the disturbed Surface in CM 1:4 finish the surface as exists, complete all as specified and as directed by the Engineer-in-Charge.

Taking down Chowkhats with shutters (without taking of shutter from the frame) of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished the surface as exists, complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified and directed by the Engineer in Charge.

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted as per specification & drawing and as per manufacturer's instructions, complete all as specified and directed by the Engineer in Charge.

S&F Factory made solid panel PVC Door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail and bottom rail on either side as gap insert for top rails, bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supply & fixing in the frame at site as per specification, complete all as specified and directed by the Engineer in Charge.

S&F Factory made 35 mm thick plain, framed, panel shutters( any number No of panels) with panels of timber flat on both sides (feather edges), or of veneered partical boards medium density, wood partical boards with commercial face veneeres, supplied and fitted to chowkhats of 2nd class hard wood (hollock) , complete all as specified and directed by Engineer-in-charge.

S&F factory made 35 mm thick 2nd class hardwood (Hollock) skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a), complete all as specified and directed by the Engineer in Charge.

S&F Mild steel framed work such as in doors/chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening & fixing and similar work conforming to Fe-290 grade E-165 , complete all as specified and directed by Engineer-in-Charge

M & L for factory made steel windows box type using ERW hollow 'P' section comprising double frame for glazed and gauged skelton shutters jointed internally with flat iron 40x4 mm complete including grill of 10 mm square bar, fixed horizontally @ 10cm centre to centre hinges, handle, tower bolts, lugs etc with/without Cooler Provision complete as all specified and directed. Note:- (i) For the purpose of measurement and payment double shutter with frame shall be consider as one unit. (ii) Glazing and wire mesh shall be measured and paid for separatley in respective of item.

M&L for Factory made box type steel section ventilators, fixed type with glazing bars @ 10 mm square bar @ 10 cm c/c and with one shop coat of zinc chromate primer,complete all as specified and directed by the Engineer in Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling our glazing pins / spring clips providing and fixing new one , complete all as specified and directed by Engineer-in-Charge.

S&F, Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed by the Engineer in Charge.

S&F Figured sheet glass 3 mm thick, pin head type and glazing with oil putty (in metal frames etc) in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed by the Engineer in Charge.

S&F Aluminium handles ,plate cast type anodised of 150 mm size , complete all as specified and directed by Engineer-in-Charge.

S&F Aluminum anodised barrel tower bolts of extrudedextuded section and fixed of 200 mm size, complete all as specified and directed by Engineer-in-Charge

S&F Butt hinges medium weight cold rolled mild steel of 100 mm size and fixed ,complete all as specified and directed by the Engineer in Charge.

S&F Aluminum alloy, anodised, door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250 mm, bolts not less than 16mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ) , complete all as specified and directed by Engineer-in-Charge

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer , complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of new wooden surfaces of any description, exceeding 10 cm width or girth of any description and applying two coats of synthetic enamel paint over one coat of pink primer , complete all as specified and directed by Engineer-in-Charge

Dismantling structural steel work in including doors, gates ,angles but excluding framed truss etc. , complete all as specified and directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors, apron etc complete all as specified amd directed by Engineer-in-Charge.

M&L, Machine cut Kota stone slab flooring 20-25 mm thick laid over 20 mm thick cement screed bed of CM(1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror polish), all as specified and directed by Engr-in-Charge .

M&L, Machine cut Kota stone slab 20-25 mm thick in riser of steps, skirting,dado and pillar laid over 15 mm thick cement plaster of CM(1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completed all as specified and directed by Engr-in-Charge .

Dismantling of cast iron or reinforced concrete drains pipes, jointed in cement mortar and taking out of trenches,or from wall, if required upto 100 mm internal dia of drains completed all as specified and directed by Engr-in-Charge .

S&F, 75 mm sand cast iron soil waste and vent pipes, in any length with or without ears, fixed to wallcompleted all as specified and directed by Engr-in-Charge

S&F in repair CI 75 mm bends (Any radius) , disminishing pieces or tapers fitted with oval access door completed all as specified and directed by Engr-in-Charge

M&L in repair Cast iron floors traps 75 mm outlet dia with grating including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) complete and fixed all as specified and directed by Engineer-in-charge.

S&F Bib tap standard of PTMT ,15mm bore dia of any colour high pressure screwed for iron pipe and fixed as in repair (minimum weight 90gms) ,complete all as specified and directed by Engineer-in-Charge.

S&F Ball valve of 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) & fixed in repairs , complete all as specified and directed by Engineer-in-Charge.

S&F PVC waste pipe for WHB including all fittings fixed as in repair , complete all as specified and directed by the Engineer in -Charge.

S&F Stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen or with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm fixed as in repair and making good to disturbed surfaces, complete all as specified and directed by Engineer-in-Charge. Make : Nirali/ blue star or equivalent.

Dismantling existing water storage tanks exc 250 litres but n.exc 500 litres capacity by disconnecting existing water connection and removal from site , complete all as specified and directed by Engineer-in-Charge

S&F Rotational moulded PVC, tripple layered white colour, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve , complete all as specified and directed by Engineer –in-Charge.

S/F, in repair 100/125 mm dia CP grating with/without hole ,complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. using jute brush from inside & outside of 500 litre to 1000 litre capacity PVC water tanks and from mouths of connected pipes, removing the scale and dirt etc. to a distance of not exceeding 500 metre, washing the tanks with water, cleaning the connecting pipes with bleaching powder solution and finally applying 2% potassium permanganate solution for disinfection, marking with white paint on tank ‘Date of cleaning the tank ’, complete all as specified and directed by the Engineer in Charge.

S&F PVC tank lid (cover) suitable for 500/1000 litres capacity water tank with hinged and hooked fixing by steel screw for existing PVC water tank on buildings, fixed in repair, complete all as directed by Engineer in Charge

S&F in repair vitreons china wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and directed.

Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 16 tender documents.

DIKSHA ENTERPRISES

MISHRA CONSTRUCTION COMPANY

AK CONSTRUCTION

SRI SAI CONSTRUCTION COMPANY

shubham enterprises

GARG ENTERPRISES