Kolhapur WSS Repairing of 50 HP twin lobe rotary blower along AMC

Amount

Sub-Estimate No. 1: Annual maintenance of measuring equipment's at various locations of Kolhapur, Gadhinglaj, Ajara & Halkarni industrial Area.

Annual maintenance, Testing and calibration with providing and replacement Providing maintenance for Electromagnetic flow meter including site visit at various locations.

Testing & Calibration of flow meter by clamp on portable type flow meter at site including follow SOPs and provide traceable documentation, Consult on calibration methods and frequencies, Proactively identify potential instrument issues, our calibration management software COMPUCALL will improve calibration planning and at the same time satisfy the requirement of customers by providing traceable & auditable records. Also it will support to link web portal, allow to download the calibration certificate, technical information. Verification of flow meters _Once in a year. > Field check / Hearbeat verification of the flow meter to assess the flow meter healthiness. > To check the current working conditions of the flowmeters to be verified . > To assess the functional performance of the flowmeters. > To documents the flowmeters performance in the verification report . > To confirm the flowmeter remains in the factory conditions.

Supply of Display Module for Flow meter

Supply Kit main PCB for Flow meter

Supply of Slow blow fuse 1 Amp for flow meter

Supply of UPS/ Inverter with battery of 1 KVA for Flow meter Panel

Supply of surge arrestor for flow meter panel

Supply of sensor cable for flow meter

Supply of current coil cable for flow meter

Supply of Servo Control voltage stabilizer 01 KVA

Supply of weather proof panel with stand including internal wiring complete.

Rebate for damaged / dismantled equipment's devices etc complete

Providing hydraulic manual floor crane having capacity 1000 /1500 kg including all required accessories complete

Sub-Estimate No.2: Repairs & overhauling of 50 HP rotary air blower at WTP, Kagal

Repairs & overhauling of 50 HP rotary air blower at WTP, Kagal Dismantling of 50 HP KAY make Twin Rotor Air Blowers having Sr. No. 37KE4TOP from its position including side plate, Rotor's, Cylinder inlet section, outlet suction pipe, Air Filter's, Bearings, Side Gear, etc. using tools labours chain pulley, Bearing puller, etc.

Cleaning the air blowers including, rotors, rotor casing, casing, inlet & outlet suction pipe, air filter assembly using diesel cotton waste, air blower, labours, etc.

Providing & fixing following spares for the blowers Supplying and erecting of Bearing No.NU310EJ/C3

Supplying and erecting of Bearing No.3310A/C3 non drive end.

Supplying and erecting of Air Filters

Supplying and erecting of Gears with teeth cutting, hardening, machining, etc.EN-36 material as per sample.

Supplying and erecting of Oil seals as per sample

Supplying and erecting of Special champion gasket packing set (full set)

Supplying and erecting of Fenner make SPCV belt No. 2000 (3nos. For each blower)

Supplying and erecting of Enklo - 520 oil (05 Ltr. In each blower)

Supplying and erecting of V-belt pulley set with Bori 9g key way, etc.

Supplying and erecting of Pressure relief valve

Supplying and erecting of 200 mm glycerin filled pressure gauges

Supplying and erecting of GI Nut bolt of various sizes

Supplying and erecting of High temperature lining strips for rotor

Re-assembly of all parts together & fixing the blowers in position and commissioning with test & trails.

To and fro transportation to site

Motor Servicing and overhauling 415 3 phase 50 HP motor

Scrapping & painting of 1 motor With blowers.

Supplying and erecting Bearing No.6313-ZZ

Starter Proving & erecting 3 pole MCCB upto 100 A

Proving & erecting no volt coil MNX 30 HP to 90 HP motor

Proving & erecting thermal overload relay for motor starter 40 HP to 50 HP.

Supply & erection of timer above 30 HP motor

Supply & erection of Contactor for motor starter suitable for above 45 HP to 50 HP

Supply & erection of pump protection relay comprising current sensing phase failure and UV + OV relay with dry run and overload protection suitable for 3 phase pump.

Supply & erecting set of 3 pilot lamps, all bakelite with colour glasses with miniature lamp 230 V / 250 V erected on provided CRCA box with penal type fuses and connected with PVC wires.

Labour charges for internal wiring to panel including all materials

Rebate for dismantled materials

Elink Software technologies Pvt Ltd. (BID ID -6496997)

Kevla Engineering (BID ID -6501635)