Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.3 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹27.5 L+₹6.2 L (29.4%)Rejected-Finance | L2 | Rejected-Finance L2 |
Tender Value
₹23 L
EMD Value
₹46,000
Closing Date
14 Nov 2023, 6:00 pmClosed
Garrison Engineer (East) Jalandhar Cantt
Garrison Engineer (East) Jalandhar Cantt
REPAIR MAINT OF REFRIGERATORS, WATER COOLERS, DEEP FREEZERS, AIR CONDITIONERS, SOLAR WATER HEATERS, VOLTAGE STABLIZERS AND CONNECTED E/M APPLIANCES FOR JRC EXCEPT MH AREA UNDER GE (EAST) JALANDHAR CANTT
2023_MES_623779_1
GE/JULL/ET-54/2023-24
Open Tender
Civil Works
Item Rate
273 days
Jalandhar Cantt
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jalandhar Cantt
₹46,000
Yes
11 Jan 2024
17 Oct 2023
22 Nov 2023
17 Oct 2023
14 Nov 2023
2 Nov 2023
Amount
Supply and fixing in repairs thermostat adjustable type suitable for geyser 25/35/50 Ltr capacity complete all as specified and directed Make:-Expo/Airex/Usha/DANFOSS/Honey Well/SIEMENS /Johnson/Rapidcool OR equivalent as approved by GE.
Material and labour for servicing of AC's split type of capacity 1 /1.5 / 2.0 TR inner & outer unit of any make, cleaning of outdoor condenser unit, indoor unit cooling coil, with chemical solution c-shine or equivalent and high pressure water jet pump, greasing to condenser fan, checking, tightening all electrical connections, washing of air filter, oiling and tightening of all nut, bolts, etc complete all as directed
Material and labour for servicing of AC’s window type of capacity 1.5 / 2.0TR of any make, by taking down AC, cleaning of condenser coil and cooling coils with chemical solution c-shine or equivalent and high pressure water jet pump, greasing to condenser fan, checking, tightening all electrical connections, washing of air filter, oiling and tightening of all nut, bolts etc complete all as directed
Material and labour in replacement compressor sealed unit of capacity 1.5 TR unit suitable for air conditioners window type including taking out old unserviceable compressor, cleaning, flushing, vaccumizing the system, charging/filling of refrigerant gas in adequate quantity, soldering, brazing of suction, discharge and charging line complete all as specified and directed. Make:- Kirloskar/ LG/ Toshiba/ Hitachi/ Carrier/ Tecumseh/ EMERSON COPELAND/ WHIRLPOOL
Material and labour in replacement compressor sealed unit suitable for air conditioner split type of capacity 1.5/2.0 TR in outdoor unit including taking out old unserviceable compressor, cleaning flushing, vaccumizing the system, charging/filling of refrigerant gas in adequate quantity, soldering/ brazing of suction, discharge and charging line complete all as specified and directed. Make:- Kirloskar/ LG/ Toshiba/ Hitachi/ Gujral/ Carrier/ Tecumseh/ Usha Shri Ram/ EMERSON COPELAND/ WHIRLPOOL
Supply, replacement, connecting and testing of double shaft blower motor 240 volts single phase suitable for window type AC 1.5/2 TR as per existing type and size complete all as directed. Make: Khaitan/ Universal/ CG/ Carrier/ Voltas/ Sidwal.
Supply, replacement, connecting and testing of consensing unit motor with fan blades suitable for 1.5 /2TR split AC 240 volts single phase, all as directed. Make: Khaitan/ Universal/ CG/ Carrier/ Voltas/ Sidwal.
Supply, replacement, connecting and testing of indoor unit (Evaporating unit), blower motor suitable for 1.5/ 2 TR split AC 240 volts single phase, all as directed. Make: Khaitan/ Universal/ CG/ Carrier/ Voltas/ Sidwal.
Supply, replacement, connecting and testing of indoor blower suitable for 1.5/ 2 TR split AC 240 volts single phase, all as directed.
Supply and replacement of blower drum as per sample suitable for 1.5/2 TR Window AC all as directed.
Supply and fixing in replacement of temperature sensor as per existing type and size suitable for 1.0/1.5/2 TR window/split AC complete all as specified and directed.
Supply and fixing in replacement of starting/running capacitor conforming to IS specification suitable for 1.0/1.5/2 TR window/split AC complete all as specified and directed. Make: Havells/ Unistar/ Asian/ EPCOS/ Sarda/BAJAJ/USHA
Material and labour for charging of refrigerant gas in window type AC 1.5 Ton capacity including vaccumizing, leakage test and rectification of leakages etc complete all as directed.
All as per item No 13.00 here-in-before but of capacity 2.0 TR
All as per item No 13.00 here-in-before but for split type AC of capacity 1.0/1.5 TR
All as per item No 13.00 here-in-before but for split type AC of capacity 2.0 TR
Supply, replacement, connecting and testing of condensing unit motor with fan blades suitable for 1.5/2.0 TR Split AC 240 Volts single phase, all as directed. Make:- Khaitan/Universal/CG/ Carrier/Voltas/ Sidwal.
All as per item No 17.00 here-in-before but for capacity 2.0 TR all as specified and directed.
Material and labour for refixing of condensed water pipe line flexible type from cooling unit up to 2m length including necessary clamps, joint repairing with solutions and make it leak proof all as directed
Supply and fixing in repair MCB single pole 6-32 Amps, B curve10 KA all as directed.
Repair/servicing of Electronic PCB Board for non inverter AC of any make/ any type all as specified and directed.
Repair/servicing of Electronic PCB Board for inverter AC (Outer/indoor unit) of any make/ any type all as specified and directed.
Supply and fixing in replacement universal remote for any make/type of AC all as specified and directed.
Supply and fixing in replacement flare nut of size as per existing including necessary flaring of copper tubing complete all as specified and directed
Supply and fixing in replacement service valve for 1.5/2.0 TR AC any make and type of AC all as specified and directed
Supply and fixing in replacement PCB remote plate DC operation suitable for hot and cold operation of AC Window type 1.5 /2 TR complete with remote all as specified and directed.
Supply and fixing single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with and including single pole MCB 20 Amps complete all as specified and directed
Supply and fixing in replacement of AC window top cover of size made of 1.6mm thick GI sheet, suitable for AC of capacity 1.5/2.0 TR of make LG/ Voltas/ Sidwal/ Carrier/ Blue star as per site requirement and as specified and directed.
Supply and fixing in replacement of copper pipe for suction line suitable for AC split type of capacity 1.5/2TR including cutting and soldering, brazing etc complete in any length as required all as specified and directed.
Supply and fixing in replacement of heavy duty pipe insulation for copper piping with wrapping with packing brown tape suitable for AC split type of capacity 1.5/2 TR including cutting complete all as specified and directed.
Supply and fixing in replacement of copper pipe for discharge line suitable for AC split type of capacity 1.5/2TR including cutting and soldering, brazing etc complete in any length as required all as specified and directed.
Supply and fixing in replacement front grill suitable for AC window mounted type of capacity 1.5/2.0 TR all as per existing type and size complete all as specified and as directed.
Material and labour for rubber gasket suitable for solar water heater uoto 1000 Ltrs cap connection jointing plate including nuts and bolts complete all as specified
Supply and fixing in repair cooling coil set made out of copper pipe and fins suitable for AC window mounted type of capacity 1.5/2 TR all as per existing type and size including cutting soldering and testing complete all as specified.
All as per item No 34.00 here-in-before but for split AC 1.5/2 TR
Supply and fixing in repair capillary and filter suitable for AC window/ Split type of capacity 1.5/2 TR including cutting, soldering, brazing etc complete all as specified and directed.
Supply and fixing in repair expansion valve suitable for AC window/ Split type of capacity 1.5/2 TR including cutting, soldering, brazing etc complete all as specified and directed.
Supply and fixing in repair air filter suitable for window/split AC any cap any size all as directed.
Supply and fixing in repair reversible valve 4 way with plunger AC 200/240 volts 50 c/s as per existing make and type suitable for AC split/window type of capacity 1.5 / 2.0TR including repair/ modification to remote plate, cutting, soldering, brazing complete including charging of refrigerant gas required to maintain the required pressure complete all as specified and directed. Note: Cost of all modification required including changes in wiring connections and gas cycle system are deemed to be included in item rate. Nothing shall be paid extra on account of this.
Material and labour for servicing & repairing of voltage stabilizer of capacity 4/5 KVA by opening up and checking the fault, replacing necessary spares and make it functional all as specified and directed
Material and labour for servicing & repairing of voltage stabilizer of capacity 1-3 KVA by opening up and checking the fault, replacing necessary spares and make it functional all as specified and directed
Supply and fixing in replacement of voltage stabilizer copper wounded for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 16 Amp rating complete all as specified and directed. Makes: V-Guard/Blue Star/ Logicstat/JOHNSON.
All as per item No. 42.00 here-in-before but of cap 12 Amp rating.
Material and labour PVC insulated and sheathed, flexible wire with multi stranded copper conductor wire of size 3 core, 1.5 Sqmm, ISI marked complete all as specified and directed.
Material and labour in replacement PVC insulated and sheathed, round flexible wire with multi stranded copper conductor wire of size 3 core, 2.5 sqmm, ISI marked complete all as specified and directed.
Material and labour in replacement PVC insulated and sheathed, round flexible wire with multi stranded copper conductor wire of size 3 core, 4.0 sqmm, ISI marked complete all as specified and directed.
Taking down old unserviceable sealed compressor and Supply and fixing of new compressor sealed unit suitable for water cooler 150/150 Ltrs capacity including cleaning, vaccumizing, refrigerant gas charging of adequate quantity and testing on load complete all as specified and directed. Make: USHA / Sriram /Emerson / Kirloskar/ Carrier/ Tecumseh/ Whirlpool/ EMERSON COPELAND.
All as per Srl item No 47.00 here-in-before but sealed unit compressor suitable for water cooler capacity 60/120 Ltrs
All as per Srl item No 47.00 here-in-before but sealed unit compressor suitable for water cooler capacity 40/80 Ltrs
Material and labour for charging of refrigerant gas for water cooler 40-150 Ltrs capacity including cleaning, vaccumizing, detecting and repairing refrigerant leakage, gas charging of adequate quantity and testing on load complete all as specified and directed.
Material and labour for repair to body of water cooler/ refrigerator/ deep freezers of any capacity by fixing of MS sheet angle iron/ MS flat etc all as per existing sizes including cutting, welding, riveting, drilling, bending to shape etc, at site including grinding, finishing, painting and applying of one coat of primer complete all as specified and as directed. Note : Transportation of equipments/ T&P required at site will be responsibility of the contractor, nothing shall be paid extra on this account.
Supply and fixing in repair desert cooler stand made out of MS angle iron including cutting and welding, painting with two coat of synthetic enamel paint over a coat of red oxide primer all as directed.
Supply and replacement of water tap brass CP with inner/outer threads push type or with rotary knob of size 15 mm dia as per existing type and size complete all as specified and directed.
Supply and fixing in replacement of thermostat switch suitable for water coolers complete all as specified and directed. Make : Danfoss/ Renutrol/ Indfoss or equivalent
Supply and fixing in replacement of starting relay suitable for water coolers of capacity 150 Ltrs/120 Ltr/80Ltr/40 Ltr complete all as specified and directed. Make :- Danfoss/Renutrol/ Indfoss or equivalent.
Supply and fixing in replacement of starting/running capacitor suitable for water coolers 150 ltrs/120 Ltr/80Ltr/40 Ltr complete all as specified and directed. Make :- USHA/UNIVERSAL/ HAVELLS/EPCOS/ sarda or equivalent.
Supply and fixing in replacement of overload protector suitable for water cooler of capacity 150/120/80/40 Ltrs complete all as specified and directed. Make :- Danfoss/Renutrol/ Indfoss or equivalent.
Supply and fixing in replacement fin type condenser with copper pipes suitable for water cooler of capacity 60/120 Ltr as per existing type and size including cutting, soldering/ brazing etc complete all as specified and directed.
All as per item No. 58.00 here-in-before but of capacity 40/80 Ltrs.
All as per item No. 58.00 here-in-before but of capacity 150/150 Ltrs.
Taking down old and unserviceable sealed compressor and supply and fixing new sealed compressor unit for refrigerator of capacity 250-360 Ltrs including cleaning, vaccumizing, refrigerant gas charging of adequate qty in the unit and soldering/ brazing of suction and discharge and charging line complete all as specified and directed. Make: Kirloskar/ LG/ Voltas/ Godrej/ Hitachi/ Toshiba/ Carrier/EMERSON COPELAND/ WHIRLPOOL
All as per item No 61.00 here-in-before but for Refg of capacity 165-240 Ltr .
Taking down old and unserviceable sealed compressor and supply and fixing new sealed compressor unit for deep freezer of capacity 400-500 Ltrs including cleaning, vaccumizing, refrigerant gas charging of adequate qty in the unit and soldering/ brazing of suction and discharge and charging line complete all as specified and directed. Make: Kirloskar/ LG/ Voltas/ Godrej/ Hitachi/ Toshiba/ Carrier.
All as per item No 63.00 here-in-before but for deep freezer of capacity 200-320 Ltr .
Supply and fixing of evaporative coil ( cooling coil ) of refrigerators of capacity 260-360 Ltrs as per existing type and size including cutting, taking out to old coil, brazing/ soldering and testing complete all as specified and directed.
All as per item No 65.00 here-in-before but for refrigerator of capacity 165-230 Ltr .
Supply and fixing magnetic door gasket suitable for refrigerator of capacity 165 to 360 Ltrs as per existing type and size complete all as specified and directed.
Supply and fixing thermostat switch suitable for refrigerator of capacity 165 to 360 Ltrs as per existing size and type complete all as specified and directed. Make :- Danfoss/ Renutol/ Indfoss or equivalent.
Supply and fixing of starting relay with over load protector kit complete as per existing size and type of refrigerator complete all as specified and directed Make :- Danfoss/ Renutol/ Indfoss or equivalent.
Material and labour for repair/servicing of PCB of double door refrigerator any cap 310 Ltrs or to above, any make, any type (inverter/non inverter) all as directed.
Material and labour for charging refrigerant gas of existing type in refrigerator of capacity 165 to 360 Ltr including vaccumizing, leakage test and rectification of leakage etc complete all as specified and directed.
All as per item No 71.00 here-in-before but for deep freezer of capacity 200 Ltr-500Ltr .
Supply and fixing in replacement motor with fan for condensing coil suitable to operative on AC, 220/240 volts, 50 c/s complete with frame all as per existing size/type suitable for water cooler any capacity all as specified and directed
Material and labour for de-scaling of collector unit and piping complete and testing of solar water heaters of capacity 100 LPD complete all as specified and directed.
Material and labour for de-scaling of collector unit and piping complete and testing of solar water heaters of capacity 400/500 LPD complete all as specified and directed.
Material and labour for de-scaling of collector unit and piping complete and testing of solar water heaters of capacity 1000 LPD complete all as specified and directed.
Supply and fixing in repair of solar water heating element 2 KW Single phase, 230 Volts, ISI marked as per existing type and size complete all as specified & directed.
Supply and fixing in repair of solar water heating element 3 KW Single phase, 230 Volts, ISI marked as per existing type and size complete all as specified & directed.
Supply and fixing thermostat switch suitable for solar water heater of capacity 100-1000 LPD all as per specified ISI marked as per existing type and size complete all as specified & directed.
Supply and fixing in repair heat collector glass of any size suitable for solar water heaters of capacity 100-1000 LPD as per existing type and thickness as per existing complete fixing with suitable adhesive complete all as specified & directed
Material and labour in replacement copper pipe of size 12mm to 25mm dia in collector of solar water heaters of capacity up to 1000 LPD including cutting, soldering, insulation and testing complete all as specified and directed.
Material and labour painting of solar water heater MS structure by removing of old paint and preparing surfaces for repainting and applying two coats of synthetic enamel paint complete all as specified and directed.
Supply and fixing glass wool insulation 25mm thick duly wrapped with jute cloth complete for 15mm/20mm/25mm bore pipe complete all as specified and directed
Material and labour for aluminium cladding 0.46 mm thickness for covering glass insulation complete all as directed
Material and labour for condensing coil fan motor suitable for deep freezer 200 Ltr to 500 Ltr cap complete all as specified and directed
Material and labour for Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of size 15mm bore complete all as specified and directed.
Material and labour for Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of size 20mm bore complete all as specified and directed.
Material and labour for Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors of size 25mm bore complete all as specified and directed.
Material and labour for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 20 mm bore complete all as specified and directed.
Material and labour for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm bore complete all as specified and directed.
Supply and fixing Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 ltrs all as specified in SSR Part I.
Supply and fixing Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 ltrs all as specified in SSR Part I.
Material and labour for re-painting of desert cooler internally and externally complete including removing of old paint and preparing surfaces for repainting and applying two coats of synthetic enamel paint by using spray gun complete all as specified and directed
Supply and fixing in repair front air grill of desert cooler complete as per existing type and size all as specified and directed.
Supply and fixing in replacement of desert cooler fan motor 1/8 HP, copper wound, three speed with suitable cap capacitor suitable for desert cooler complete all as specified and directed. Make: Air cooler/ Khaitan/ CG/bajaj
Supply and fixing in replacement of submersible water pump of capacity 18 watt, single phase, 220 V for desert cooler with connecting wire complete all as specified and directed. Make: Universal/ Khaitan /CG/Havells
Supply and fixing in replacement of desert cooler PVC pipe 1 Mtr min from water pump to PVC distributor incl PVC distributor and 3 Nos PVC bend complete all as specified and directed.
Supply and fixing in replacement Wood wool pad (superior quality) at site for desert cooler any size / cap complete all as specified and directed.
Supply and fixing in replacement Starting capacitor 4.0 mfd heavy duty suitable for desert cooler complete all as specified and directed. Make: Usha/ Tibeon/ Keltron/ Asian/ Havells/ EPCOS/BAJAJ
Material and labour in replacement outer body of desert cooler as per existing type and size of standard size made of 24 gauge GI sheet and tank of 1mm thick sheet min, suitable for room cooler of capacity 5000 Cum/Hr duly painted complete internally and externally with two coats of super enamelled paint over a coat of red oxide primer all as specified and directed.
Supply and fixing in repairs switch piano flush type, 5 Amps, AC single pole, one way complete all as specified.
Supply and fixing repairs switch piano flush type, 15 Amps, AC single pole, one way complete all as specified.
Supply and fixing in repairs socket out let 5 Amp, 5 pin flush type complete all as specified.
Supply and fixing in repairs Socket outlet multi purpose 2 in 1, 3 pin, 5 & 15 Amps, flush type complete all as specified
Supply and fixing in replacement Top plug 6 Amp all as specified and directed. Make: Anchor/Havells/Cona/SSK.
Supply and fixing in replacement Top plug 16 Amp all as specified and directed. Make: Anchor/Havells/Cona/SSK.
Supply and fixing in replacement condensing coil unit AC of capacity 1.5 TR including condenser coil copper, with cooling fins, condenser motor with blades, PCB plate with complete wiring, including compressor, charging of refrigerant gas. Make: Voltas/Blue Star/ Samsung/ LG complete including cutting,brazing and testing all as specified and directed
All as per item No 107.00 here-in-before but outdoor unit of capacity 2.0 TR.
Supply and fix in replacement for CPVC pipe for drain pipe of ACs condensed water fixed complete to walls, ceilings or in floors etc. of size 40mm dia along with sockets, Tees, Bends, Elbows, wall clamps, necessary joining material other accessories required for fixing of pipe with wall/floor all as specified and directed
All as per srl item no. 109 here-in-before but of size 25 mm dia.
Taking down existing Split AC 1.5/2.0 TR indoor unit and outdoor unit complete by disconnecting, storing refrigerant in suction and discharge lines, opening nuts and bolts taking out brackets of indoor and outdoor unit from walls, taking out Voltage stabilizer from wall, reinstall to another location without damaging the AC'S all as specified and directed
Supply and fixing in replacement Brackets for fixing split AC 1.5/2.0 TR outdoor unit with walls made of MS duly powder coated factory made with bolts, nuts and washers and 04 Nos of fasteners complete all as specified and directed
Supply and fixing in replacement Floor Stand for fixing split AC 1.5/2.0 TR outdoor unit made of MS duly powder coated factory made with bolts, nuts and washers and 04 Nos fasteners complete all as specified and directed
Material and labour for shifting of window type AC 1.5 / 2.0 TR by taking out AC from one room and shifting it to another location within 500 mtr and fixing it at place where directed by department all as specified and directed.
Material and labour in repairs Submain wiring with two run of single core FRLS PVC insulated unsheathed multi stranded copper conductor cable 4.0 Sqmm drawn through in and including PVC rigid non metallic concealed conduit (medium grade) with fittings including earth continuity FRLS copper conductor 4.0 Sqmm PVC insulated with green insulation complete all as specified including taking down existing unserviceable/burnt submain complete all as specified and directed
Material and labour in repairs Submain wiring with PVC insulated cable copper conductor FRLS two single core 6.0 Sqmm drawn through and including PVC rigid non metallic concealed conduit (medium grade) with all fittings including earth continuity FRLS copper conductor 6.0 Sqmm PVC insulated with green insulation complete all as specified including taking down existing unserviceable/burnt submain complete all as specified and directed
Supply, laying, testing and commissioning in replacement of Service wire PVC insulated, electric cables ( heavy duty) 1100 volts grade with aluminium conductor of size 4.0 sqmm 2 core complete all as specified and directed.
Supply, laying, testing and commissioning in replacement of Service wire PVC insulated, electric cables ( heavy duty) 1100 volts grade with aluminium conductor of size 6.0 sqmm 2 core complete all as specified and directed.
Material and labour for cleaning/descaling of geyser of capacity 25/35/50 ltr of any make, with chemical solution, checking, tightening all electrical connections, tightening of all nut, bolts, etc complete all as directed
Supply and fixing in repairs of metal clad industrial plug top 20 Amps, 250 V, 2 pole with earth suitable for geyser/ AC complete all as specified & directed.
Supply and fixing in repairs of metal clad industrial socket 20 Amps, 2 pole with earth suitable for geyser/ AC complete all as specified & directed.
Taking down geyser any capacity by disconnecting hot and cold water connection and refixing the geyser with new fasteners all as specified and directed.
Supply and fixing in replacement geyser inner water tank S/S suitable for Geyser Capacity 50 Ltrs as per existing shape and type complete all as specified & directed.
Supply and fixing in replacement geyser inner water tank S/S suitable for Geyser Capacity 25/35 Ltrs as per existing shape and type complete all as specified & directed.
Supply and fixing in replacement geyser assembly brass C P type 9/6/8 hole with gasket as per existing type and size complete all as specified & directed.
Supply and fixing in replacement multifunction safety valve for geyser any capacity complete all as specified and directed
Supply and fixing in repairs geyser heating element triangle/ cup type 2.0 KW with gasket complete all as specified and directed. Make:- THEETA/DASSPASS/USHA
Supply and fixing in repairs geyser heating element triangle/ cup type 2.0 KW with gasket complete for make VENUS geyser models all as specified and directed
Supply and fixing in repairs hot & cold PVC flexible water connection 600mm long suitable for geysers complete all as specified and directed
Supply and fixing in repairs hot & cold PVC flexible water connection 450mm long suitable for geysers complete all as specified and directed
Supply and fixing in repair CP bib cock 15mm dia all as specified and directed.
Supply and fixing in repair CP stop cock 15mm dia all as specified and directed.
Supply and fixing in repair Desert cooler fan blade (aluminium blades) 500 mm sweep dia all as specified and directed.
Supply and fixing in replacement Electronic PCB Board for indoor unit of split AC (inverter type) of any make/ any type all as specified and directed.
Supply and fixing in replacement Electronic PCB Board for outdoor unit of split AC (inverter type) of any make/ any type all as specified and directed.
Supply and fixing in repairs cylindrical type hot water tank of capacity 1000 Ltrs made food grade stainless steel 304,1.6 mm thick, layered with a galvanized steel shell on the outside duly insulated with 50mm thick PUF of 40 kg / cum density with a standard screw-in port for electrical backup heating element suitable nipple for inlet, outlet, overflow water connection , or any other item required as per site condition including cladding as per existing design complete all as specified and directed.
Supply and fixing in repairs cylindrical type hot water tank of capacity 500 Ltrs made food grade stainless steel 304, 1.6 mm thick, layered with a galvanized steel shell on the outside duly insulated with 50mm thick PUF of 40 kg / cum density with a standard screw-in port for electrical backup heating element, suitable nipple for inlet , outlet , overflow ,water connection any other item required as per site connection including cladding as per existing design complete all as specified and directed.
Material and labour for black hose pipe suitable for hot water upto 80 degree centigrade having bore size 1 inch complete all as specified
Material and labour for black hose pipe suitable for hot water upto 80 degree centigrade having bore size 1.5 inch complete all as specified
Material and labour for stainless steel clamp ( worm drive adjustable type) of size suitable for 1.5'' outer dia complete all as specified
Material and labour for stainless steel clamp ( worm drive adjustable type) of size suitable for 2'' outer dia complete all as specified. Note:- 1.00 to 141.00: The quoted rate includes diagnosing the fault to check unserviceable parts, the contractor shall have to replaced the defective parts within 8 hours of intimation otherwise penalty as per PS clause shall be levied in case of any delay on contractor's part.
AGGARWAL ENGINEERING CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .