REPAIR AND MAINT OF INTERNAL WIRING EM FITTINGS AND FIXTURES AT MD ACCN OTM ACCN UNDER THE JURISDICTION OF GE (A) JAISALMER

Amount

Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including PVC Casing Capping/conduit, fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets, light fitting etc removing materials for taking credit and making good disturbed surface of walls,floors etc all as directed.

Taking down old point wiring from existing concealed conduit including fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets etc and making good disturbed surface of walls,floors etc all as directed.

Taking down of old unsv submain wiring of any type any size complete all as specified and directed with casing capping / surface conduit/ existing concealed conduit complete all as specified and directed

Taking down submain wiring any type any size from existing conduit complete all as specifie d and directed

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down the existing unserviceable MCBs/MCCBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down of old unsv tubelight fitting /bulkhead/ garden light/ gate light of any descriptionlight fitting any type any watt complete all as specified and directed

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, PVC casing caping/conduit and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box thickness as per IS standard (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for One light or fan point, controlled by one, one way switch 5 Amps complete all as specified and directed by Engineer-in-charge.

All as per Item No 8.00 here-in-before but for one bell/buzzer point controlled by one push botton.

All as per Item No 8.00 here-in-before but for one socket out let 3 pin 5 Amps on the same board.

All as per Item No. 8.00 here-in-before but for one socket outlet of 3 pin 5 Amp on independent board.

All as per Item No. 8.00 here-in-before but for one light point controlled by two, 2 way switches.

All as per Item No 8.00 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated as earth wire complete all as specified.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and existing PVC Concealed conduit of 20 mm bore with accessories in wall floor etc with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for One light or fan point, controlled by one, one way switch 5 Amps complete all as specified and directed by Engineer-in-charge.

all as per Item No 14.00 here-in-before but for one bell/buzzer point controlled by one push botton.

all as per Item No 14.00 here-in-before but for one socket out let 3 pin 5 Amps on the same board.

all as per Item No. 14.00 here-in-before but for one socket outlet of 3 pin 5 Amp on independent board.

all as per Item No 14.00 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated as earth wire complete all as specified and directed by Engineer-in-charge.

S&F switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete specified.

S&F switch piano, flush type, 15 amps, 230 volts, single pole, one way (ISI marked) complete all as specified.

S&F switch piano, flush type, 5 amps, 230 volts, single pole, two way (ISI marked) complete all as specified

S&F sockets outlet multipurpose 2 in 1, 5 Amps flush type confirming to IS all as specified.

S&F sockets outlet multipurpose 2 in 1 pin, 5 and 15 Amps flush type confirming to IS all as specified.

S&F ceiling rose, PVC of size 65 mm x 18 mm two to three terminals (ISI marked) all as specified.

S&F bell push flush type 5 Amps complete all as specified.

M&L Point wiring used approved colour coding as per IS (Red, Black and Green) for single phase circuits), with multi-stranded copper conductor 1.5 sqmm nominal cross -sectional area, single core, PVC insulated and unsheated FRLS cable 1100 volts grade, ISI 694 marked with valid CML No. in and existing PVC Concealed conduit of 20 mm bore including medium grade, PVC concealed conduit MMS, ISI marked of dia not less than 20 mm and conduit accessories conceled in wall/roof/floor etc, ISI marked with valid CML No. (IS-9537 - 1983 for condits and IS : 3419 - 1976 for conduit accessories) with terminated to new pressed flush metal boxes readily available cover with outer plates inner plates et, suitable for mounting modular type switches, socket fan regulator etc PVC insulated multistanded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for one light or fan point, controlled by one, one way switch 5 Amps complete all as specified and directed by Engineer-in-charge.

all as per Item No 26.00 here-in-before but for one bell/buzzer point controlled by one push botton.

all as per Item No 26.00 here-in-before but for one socket out let 3 pin 5 Amps on the same board.

all as per Item No. 26.00 here-in-before but for one socket outlet of 3 pin 5 Amp on independent board.

all as per Item No 26.00 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated as earth wire complete all as specified and directed by Engineer-in-charge.

Supply & fix flat mechanical switch motion technolgy having some position whether on or off made out of corrosion resistant heat resistant and impact resistant polycorbonate electric are encapulated modular switches of following :-

1 way 6 Amp Switch

2 way 6 Amp Switch

1 way 20 Amp Switch

1 way 20 Amp switch with Neon

6 A Bell push switch

Supply & Fix flat mechanical switch motion technolgy having some position whether on or off made out of corrosion resistant heat resistant and impact resistant polycorbonate electric are encapulated modular sockets of following :-

6 Amp 3 Pin socket outlet with shutter

6 Amp/16 Amp 3 Pin socket outlet with shutter

20 Amp 3 pin socket with shutter

Modular Fan regulator (5 speed)

S&F stepped type, electronic fan regulator on the existing phenolic laminated sheet etc as required all as specfied

M&L for lamp holder, PVC/ polycarbonate type with cord grip cap suitable for prndant fittings including taking down unserviceable lamp holder of any description complete all as specified

M&L for lamp holder, PVC/ polycarbonate type with back plate suitable for batten fittings including taking down unserviceable lamp holder of any description complete all as specified

S&F bell AC single pole Ding Dong type 230 volt all as specified.

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 4.0 Sq mm (FRLS) in and including PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 4.0 Sq mm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 4.0 sqmm cable & One run of 4.0 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.)

M & L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 4.0 Sqmm (FRLS) in existing concealed/Surface conduit non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 4.0 Sqmm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 4.0 Sqmm cable & One run of 4.0 Sqmm cable shall be paid as one unit length.)

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sq mm (FRLS) in and including PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 6.0 Sq mm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 6.0 sqmm cable & One run of 6.0 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.)

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sqmm (FRLS) in existing concealed /surface conduit non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 6.0 Sqmm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 6.0 Sqmm cable & One run of 6.0 Sqmm cable shall be paid as one unit length.)

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 10.0 Sq mm (FRLS) in and including PVC conduit non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 10.0 Sq mm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 10.0 sqmm cable & One run of 10.0 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.)

Supply and fixing of LED box type Integrated Batten 40 watt having Aluminum Extruded housing in white powder coated Finish with high translucent PC Cover, Elegant Design, IP 20 Protection. Dimensions of the Fitting Shall be Not less then 1200 MM ( Length) X 40 MM ( Width ) X 63 MM ( Height ). Lumens output of the fitting shall be not less then 4400 lm, CCT 5700 – 6500K, buring hours 50,000 Surge Protector 4 KV, PF>= 0.95, Separate detachable type Electronic constant current drivers for easy replacement and maintenance, THD < 10%, Necessary mounting arrangements .The fixture shall be suitable for wall mounting /suspension mounting as per site requirement. The Manufacturer of the fixture shall have in house NABL Accredited Lab and must produce certificate of the same along with LM-79 / LM80 / Test Report as per Crompton CAT PART NO Shelter . CIS -305-40-57-SL-DP-NWH or equivalent in Appx 'B' list of Makes including taking down existing light fittings of any desription complete all as specified and directed by Engineer-in-charge.

S & F for LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with extruded aluminium housing and polycarbonate diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe including taking down existing light fittings of any desription complete all as specified and directed by Engineer-in-charge.

Supply and fixing of recessed/ceiling mounted down lighter with CRCA housing with high bright LED, idealy suited for low ceiling areas Brilliance 36 watt LED, size 2ft x 2ft The product features color tuning from 3000 K to 6500 K, necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe including taking down existing light fittings of any desription complete all as specified and directed by Engineer-in-charge.

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 15 watts including taking down existing unserviceable one of any description complete all as specified and directed by Engineer-in-charge.

Supply and fixing of building security light fitting LED 35 Watt IP 66 IK 07 pressure dia cast aluminium housing with high efficient LED as lihjting souce and PC cover having TOP opening sepreate drive compartment etc and connecting ncluding taking down existing light fittings of any desription complete all as specified and directed by Engineer-in-charge. Make Havells cat pot No .EDDURACITYLITEPLATPLUSSL35WLED757SASYBOPC or equivalent in Appx 'B' list of Makes

S & F GI pipe bracket light grade of 40 mm dia for building security light,clamps made of FI 40 mm x 6 mm Incl nuts, bolts & washers, painting including taking down existing unserviceable bracket of any desription complete all as specified and directed by Engineer-in-charge.

S&F Integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 10 watts LED with necessary MS base box made out of MS sheet of 2 mm thick of suitable size abbended in PCC 1:2:4 base, elecrical connections with adequate size including taking down existing unserviceable one complete all as specified and directed by Engineer-in-charge. Make:Havells Cat part No Havells OUNTBL10WLED830PSYMTOPMMA (0.6 M) or equivalent in Appx 'B' list of Makes.

S & F for LED post top lantern/gate Light 40 watt light fitting made of die cast top housing must also be dia cast aluminium spigot housing with decarative acrylic diffuser with IP 65 protection complete with all accessories including taking down existing light fittings of any desription complete all as specified and directed by Engineer-in-charge. Make-Crompton Cat part No LPTO-40-CDL-M or equivalent in Appx 'B' list of Makes.

S & F for MCCB DB VTPN 4 way 415 V double door IP 43 with provision for FP MCCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going complete prewired including Bus Bar etc suitable for operation on 415 volt 50 Hz AC supply including taking down existing one complete all as specified and directed by Engineer-in-charge.

S&F in repair for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system IP-43 protction complete all as specified and directed by Engineer-in-charge.

S&F in repair for sheet metal enclosure MCB SPN DB 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system IP-43 protction complete all as specified and directed by Engineer-in-charge.

S&F in repair MCCB 4 Pole 415 volts 16 KA suitable for fixing on VTPN DB of capacity 100 Amps with extended terminals complete all as specified and directed by Engineer-in-charge. Note:- Rate quoted by the tenderer shall be deemed to inclusive of suitable size frame for MCCB required as per existing DBs at site.

S&F in repair 415V 10 KA 'C' curve miniature circuit breaker (MCB) of tripple pole and neutral rated capacity TPN 40 To 100 Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-charge.

S&F in repair 415 V 10KA 'C' curve miniature circuit breaker (MCB) of tripple pole rated capacity TP 25 To 63 AMP Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-charge.

S&F in repair miniature circuit breaker (MCB) of single pole and neutral SPN 32 AMP 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-charge.

S&F in repair miniature circuit breaker (MCB) of single pole SP 10-32 AMP 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-charge.

M/S PRASHANT BENIWAL

M/s Bajrang Electricals

M/S YOGANSH CONSTRUCTION CO.

Shri Maruti Trading Co.

Manisha Enterprises