Construction of Multi Purpose Hall at Kodikuruchi Village in Kodikuruchi Panchayat in Kadayanallur Panchayat Union, Tenkasi District under MLACDS 2024-25

Amount

Construction of Multi Purpose Hall at Kodikuruchi Village in Kodikuruchi Panchayat in Kadayanallur Panchayat Union, Tenkasi District under MLACDS 2024-25

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Brick work in CM 1:5 mix using third class country bricks of size 8 3/4 x 4 1/4 x 2 3/4 including all cost and conveyance of materials and labour charges etc., complete

Refilling the basement with excavated earth including all labour charges such as watering and ramming etc., complete as per standard specification.

Supplying and filling of conveyed Earth by lorry in basement filling including stacking for premeasurement, conveyance loading, and unloading charges and all other incidential charges and including filling laying watering and consolidating etc., complete.

Centering charges for RCC works including all cost and conveyance all materials to site etc., complete.

i) Upto Basement

ii) Above Basement

Supplying and fabrication of steel including all cost and conveyance and all labour charges for cutting, bending, tieing and placeing in position etc., complete.

RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete excluding cost of steel without centering.

Paving the floor with best quality Stain free Nano Polish Vetrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete.

Plastering with CM 1:3 mix using to 10mm thick including all cost and conveyance of all materials and all labour charges etc., complete

Plastering with CM 1:5 mix using to 12mm thick including all cost and conveyance of all materials and all labour charges etc., complete

Supplying and Fixing of 0.47 mm Thick Galvalume Sheet with necessary farming support with neat alignment and necessary rubber beading etc all complete to wall clading and ceiling etc complete

Supply and Fixing of ISMB 125x70 mm for column and truss using ISA 50x50x5 including all cost and conveyence of all materils and all charges etc, complete M2282

Distempering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc., complete.

Exterior Emulsion painting two coats with best approved quality and colour emulsion paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Painting New Iron Works Using Emulsion Paint with approved colour including cost and conveyance and labour charges etc., complete.

Provision for Electrication Works

a)SD142 (DPIC Switch)

b)SD 125 (Meter Board)

c)SD 64 (Service wire)

d)SD18 (Light/Fan Point)

e)SD 83 (Supply of CFL Lights with cover)

f)SD 88 (Supply of Tube light fittings)

g)SD 110 (Supply of ceiling fan)

h)SD 36 (Plug Point)

Supply and fixing of GI Pipes of 20mm dia

Labour charges for fixing in position of steel door etc., complete.

Labour charges for fixing in position of steel window,Ventilator etc., complete.

Fabrication and supply of mild steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Door D (1.2 X 2.1)

Fabrication and supply of mild steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Window W (1.2 X 1.3)

Ventilator V (0.9 X 0.45)

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

R.GOMATHINAYAGAM (BID ID -1228953)