Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.4 LAccepted-AOC FLAT NO 404 A WING HILL SIDE RESIDENCY BEHIND KIRTI POLICE SOCIETY KATRAP BADLAPUR EAST DIST THANE MAHARASHTRA 451503 | 451503 | ₹23.4 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹25.1 L+₹1.7 L (7.44%)Rejected-Finance SWAGAT CO OP HSG SOCIETY LTD 22 303 CHAITANYA SHIVAJI RAJE COMPLEX MHADA COMPLEX OPP EKA NAGAR KANDIVALI W MUMBAI 400 067 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400067 | ₹25.1 L+₹1.7 L (7.44%) | L2 | Rejected-Finance Other than L1 |
| 3 | L3₹26.6 L+₹3.2 L (13.6%)Rejected-Finance AT DUNGAMAL NH 5 POST NB CHILKA VIA BALUGAON DIST KHURDA ORISSA 752037 | KHORDHA | ODISHA | 752037 | ₹26.6 L+₹3.2 L (13.6%) | L3 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | HARI HARA NAYAK L3 | cooltech engineering services L2 | M/S SOMANATH ENTERPRISES L1 |
|---|---|---|---|---|---|---|
| 1.00 | Supply and fix fabricating and erecting welded structure made out of mild steel channel or angle section of reqd size and shape including clamp, back plate with bolts, nuts & washers drilled for bolts, welding, bending cold or hot in any shape or size including all fixing arrangement and painted with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. | 1 | Qtl | 11,500 ₹11,500 Lowest | 17,500 ₹17,500 | 15,000 ₹15,000 |
| 2.00 | Supply Install testing and commisioning of Chlorine dosing system consisting of following specification :
PREPARATIONTANK
1 Type: Vertical cylindrical with flat end and bolted top cover
2 Capacity:1000 liters
3 Liquid/Material to be handled:Cholrine
4 OperatingTemperature:45 Deg. Cel
5 OperatingPressure:Atmospheric
6 Material of Construction:LDPE(Transparent Chemical Tank)
7 Testing:Leakage Test: Water Fill up
8 Quantity: 01Nos
DOSING PUMP
1 Model:UEMD-01
2 Type:Mechanical Diapgram Pump
3 Flow Capacity: 0 – 100 Liter Per Hour
4 Suction Pressure:Flooded
5 Discharge Pressure: 10Kg/Sq.Cm
6 Material of wetted parts(Liquid End): PP
7 Capacity adjustment:0 to100 %Manually
8 Speed Reduction:By Integral Worm and Worm Wheel
9 Volumetric efficiency: 90%
10 Quantity: 2Nos(1Working+1Standby) | 5 | Each Job | 4,99,000 ₹24,95,000 | 4,60,000 ₹23,00,000 | 4,31,000 ₹21,55,000 Lowest |
| 2.01Item Ser No 2.00, description continue/---- PUMP DRIVE MOTOR 1 Type: Asynchron sq.cage induction with VFD 2 Supply system:3 ph , AC, 415+10%, 50 Hz 3 Mounting/deg protection:B 3(Foot)/IP55 4 No of poles/SPEED : 4pole/1365-1440RPM 5 Insulation class/temp rise:class F/limited to lassB 6 Methods of cooling:TEFC 7 Applicable standard:IS 325 8 Rating: 1.0HP 9 Motor frame type: As per DIN/IEC34-7/DE &NDE greasing nipples require 10 Starting conditions : Direct on line starting (DOL) Cold condition:consec. Starts. Hot condition : consec. Starts. 11 Noise level(less than):85 dB (A) at a distance of 1mtr. 12 Quantity: 2Nos AGITATOR 1 Type: GD010028900 2 Model:Slow speed,Motorized,with bearing arrangement 3 Impeller type:3 Bladed, Propeller 4 Material of construction Shaft & Impeller:SS:304 5 Mounting:Top Entry,Center mounted 6 Out put RPM:90-110 RPM | ||||||
| 2.02Item Ser No 2.00, description continue/---- AGITATORDRIVEGEAREDMOTOR 1 Rating : 0.5HP 2 Quantity : 01 Nos MOTOR-PUMP SHAFT COUPLING 1 Type/Model : Flexible coupling 2 Quantity : 02 Nos PRESSURE RELIEF VALVE 1 Type: Direct Spring loaded 2 Size: 1/2” 3 Material of Construction:BSP (F)PP/PVC 4 Set Pressure: 5Kg/Sq.Cm 5 Quantity : 01 No STRAINER 1 Type: Y Type 2 Filtration rating: 40 Mesh 3 Size:1/2”Threaded 4 Material of Construction: PP/PVC 5 Quantity : 01No PULSATIONDAMPENER 1 Type:Cylindrical Bottle Type 2 Material of Construction:PVC 3 Quantity :1No | ||||||
| 2.03Item Ser No 2.00, description continue/----PRESSURE GAUGE (with diaphragm seal) 1 Type: Bourdon Sensing Type 2 Mounting/ entry: Direct(Local)/bottom 3 Dial Size: 100 MM 4 Process Connection:1/2"BSP(M) 5 Material of Construction of Wetted Part:SS:304 6 Material of Construction of Case: DieCastAluminum/SS 7 Accuracy:±1 % 8 Range:0 -5Kg/Sq. Cm 9 Quantity:1 No BALLVALVES A) SuctionSide: 1 Type:Ball valves 2 Material of Construction: U-PVC/PP 3 Size: 15NB 4 End connection: Socket Pasted B) Discharge Side: 1 Type:Ball valves 2 Material of Construction: U-PVC/PP 3 Size: 15NB 4 End connection: Socket Pasted | ||||||
| 2.04Item Ser No 2.00, description continue/---- NON RETURN VALVE 1 Type: Check valve 2 Material of Construction: U-PVC/PP 3 Size: 15NB 4 End connection: Socket Pasted 5 Quantity: 1No Rotameter(Flow Meter) 1 Type:Float type 2 Flow Range: 15to150LPH 3 Process Connection: 1/2"NPT(F) 4 Material of onstruction of Wetted Part:PVC/Floate:PP/PTFE 5 Quantity:1No PIPING WITHIN THE SKID 1 Size/Rating of Suction Piping:15NBxPN 10 2 Size/Rating of Discharge Piping:15NBxPN10U-PVC 3 Material of Construction:Within the skid FITTINGS 1 Type/Rating:Socketwelded/15NB,PN10 2 Material of construction: U-PVC FOUNDATION BOLTS 1 Size: M16x150Long 2 Material of Construction: Mild Steel 3 Quantity: 4Nos | ||||||
| 2.05Item Ser No 2.00, description continue/----Control Panel : Control panel for chlorine dosing system. Start & stop push button station with indication for pumps & agitator. Selector switch for Pump agitator A & B, trip indication of pumps & agitator. chlorine can be adjustable according raw water requirements to Meet desired Chlorine value, in this pump Start & Stop will be through signal from ORP sensor. this ORP sensor sensor to be installed on raw water line. controller will programble logic controller. Pump shall be off based on tank chemical low level through the Level switch. | ||||||
| 3.00 | Supplying and laying of UPVC 25 mm dia Pipes (SCH-80) with all fittings on walls/ceiling or laying in floors complete all as specified. | 60 | RM | 120 ₹7,200 Lowest | 159 ₹9,540 | 170 ₹10,200 |
| 4.00 | Material and labour for PCC 1:3:6, type C-1, using 20 mm graded stone aggregate, as in foundation/ including necessary form work and finishing the exposed concrete surfaces even and fair complete all as specified and as directed | 1 | Cum | 6,500 ₹6,500 | 7,500 ₹7,500 | 6,200 ₹6,200 Lowest |
| 5.00 | M & L for earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 32x6mm GI strip as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 connected to earthing test point,including 20 mm GI pipe (Medium grade) for watering and 40 mm GI pipe (Medium grade) for protection of earth strip and etc.. including testing on completion ,PCC chambers in PCC1:3:6 type C1, RCC M25 type cover slab 50mm thick with 8mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wiremesh ,funnel,lugs and charcoal,salt etc all as applicable complete all as specified and as directed by the Engineer-in-Charge | 6 | Each set | 5,900 ₹35,400 | 7,500 ₹45,000 | 5,500 ₹33,000 Lowest |
Tender Value
₹24.3 L
EMD Value
₹49,000
Closing Date
25 Jul 2026, 6:00 pmClosed
Ankit Kumar, IDSE, EE, GE CHILKA
GE CHILKA, INS CHILKA, KHURDA, ODISHA 752 037
PROVISION OF THREE CHLORINATION PLANTS ALONGWITH CONNECTED WORKS AT SWIMMING POOLS BLDG NO P39 AND P274 AND SOLAPOKHARI PUMP HOUSE BLDG NO T76 C AT INS CHILKA UNDER GE CHILKA
2026_MES_763464_4
GE/CHL/8189 OF 2026-27
Open Tender
Civil Works
Item Rate
180 days
GARRISON ENGINEER CHILKA
MES Enlisted contractor of Class E Category a(ii)
7 documents required · 7 mandatory
₹500
Yes
GE Chilka
₹49,000
Yes
24 Aug 2026
4 Jul 2026
27 Jul 2026
4 Jul 2026
25 Jul 2026
11 Jul 2026
6 Jul 2026 - 9 Jul 2026
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.20 MB
8189Tenderdocu.pdf
Tender Documents • 0.49 MB
BOQ_869641.xls
BOQ • 24.63 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .