CWE/PM/SP-14/2021-22

Amount

BOQ PART-I (B/R WORKS)

Surface excavation n.exc. 30 cm deep averaging 15 cm deep and getting out in Hard/dense loose soil complete, all as specified and directed by Engineer-in-Charge.

Exavation in trenches in hard rock not exeeding 1.50m wide and not exeeding 1.50m depth for foundation etc or for shafts, wells, caspits, manholes, pier holes etc not exeeding 10Sqm on plan and not exeeding 1.5m in depth and getting out in hard rock complete, all as specified and directed by Engineer-in-Charge.

M & L for cement concrete 1:4:8 type D2 using (40mm graded aggreate) in foundation filling & mass concretecomplete, all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete nominal mix 1:2:4, type B-1 using (20mm graded aggregate) in foundations, including rafts, footing, foundation beams, plinth beams, bases for columns etc; basement slab, under reamed piles and mass concreate complete, all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete nominal mix 1:2:4, type B-1 using (20mm graded aggregate) in columns, pillars, piers,post and struts complete, all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete nominal mix 1:2:4, type B-1 using (20mm graded aggreate) in beams, cantilevers , bressummers, lintels over 1.5m span complete, all as specified and directed by Engineer-in-Charge.

M&L forReinforced cement concrete nominal mix 1:2:4, type B-1 using (20mm graded aggreate) in chajjascomplete, all as specified and directed by Engineer-in-Charge.

Reinforced cement concrete nominal mix 1:2:4, type B-1 using (20mm graded aggreate) in slabs supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete, all as specified and directed by Engineer-in-Charge.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and blinding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete, all as specified and directed by Engineer-in-Charge.

All as per item No 1.09 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete, all as specified and directed by Engineer-in-Charge.

Formwork to side of concrete foundations, footings, bases of columns pilnth beams and similar work rough finished flat surfaces of concrete complete, all as specified and directed by Engineer-in-Charge.

Formwork to sides of pillars and columns etc square, rectangular rough finished concrete surfaces complete, all as specified and directed by Engineer-in-Charge.

Formwork to fair finished surface of sides and soffits of floor or roof beams, beam haunchings, girder, bressummers,lintels,cantilevers ,shelevs incuding supports, overhangs, etc. also splays between floors and beams, etc complete, all as specified and directed by Engineer-in-Charge.

Formwork to chulla hoods, chajjas,troughs and sililiar item including edges fair finished surface of concrete surfaces complete, all as specified and directed by Engineer-in-Charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc 200mm thick (horizontal or slooping) fair finished surface of concrete surface complete, all as specified and directed by Engineer-in-Charge.

M&L for filling under floors with available earth incl spreading and levelling in layers n.exc 25cm thick well ramming and watering as required complete, all as specified and directed by Engineer-in-Charge.

M&L for hard core of gauge n.exc 63mm depositing spread &levelled in layers n.exc 15 cm thick watered and rammed to true surface with broken stones or boulders complete, all as specified and directed by Engineer-in-Charge.

M& L 100 mm thick cement concrete type D-2 ,1:4:8 (40mm graded aggregate) as in sub base of floor including necessary formwrk complete, all as specified and directed by Engineer-in-Charge.

M&L 25 mm thick PCC 1:2:4 type B0 (12.5mm graded store aggregate) as in floors to receive floor finishes complete, all as specified and directed by Engineer-in-Charge.

M&L Vitrified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with neat cement slurry over 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete, all as specified and directed by Engineer-in-Charge.

M&L Vitrified Ceramic dark shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with coloured cement matching with surfaces of tiles as in floor 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete, all as specified and directed by Engineer -in-Charge.

M&L Vitrified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with neat cement slurry over 10 mm thick cement screed in CM 1:4 and pointed with coloured cement matching with surfaces of tiles as in dado/skirting complete, all as specified and directed by Engineer-in-Charge.

S&F non skid ceramic tiles area of each tiles exceeding 0.06sqm but not exceeding 0.18 Sqm and 7mm thick as in floor set & jointed in neat cement slurry & pointed in coloured cement to match over 15mm thick screed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

S&F glazed ceramic wall tiles area of each tiles exceeding .06sqm but not exceeding 0.18 Sqm and 7mm thick as in wall set & jointed in neat cement slurry & pointed in coloured cement to match over 10mm thick screed in cement mortar 1:4 complete, all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class B bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks complete, all as specified and directed by Engineer-in-Charge.

Returning ,filling in trenches including spreading levelling, watering well, ramming in layers n.exc 25cm in soft/disintegrated rock(form available soil) complete, all as specified and directed by Engineer-in-Charge.

Removal of excavated material as rocks for a distance exc 5KM but n.exc 10KM and depositing outside the defence premises on desecration of Contractor as directed complete, all as specified and directed by Engineer-in-Charge.

M&L for rendering fair faces CM (1:4) 15 mm thick using water proofing compound @ 2% of weight of cement as per manufactureres on brick surfaces or concrete surfaces even and fair without using extra cement complete, all as specified and directed by Engineer-in-Charge. Note :- WPC shall be measured & paid separately.

Supply only water proofing compound complete, all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 on walls , finished even & smooth w/o using extra cement complete, all as specified and directed by Engineer-in-Charge.

M&Lfor rendering 5mm thick on ceiling in cement mortar 1:3 on concrete surfaces of ceiling finished even & smooth without using extra cement complete, all as specified and directed by Engineer-in-Charge.

M&L preparation of new plastered surfaces and applying two coats of exterior acrylic emulsion paint premium quality over a coat of primer incl one coat of wall care putty to achieve smooth surface on walls complete, all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered or unplastered surface and applying two coats of distemper oil emulsion on walls over a coat of primer over a coat of wall care putty to achieve smooth surface on walls complete, all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of ceilings & applying three coats of white wash complete, all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:3:6) type C1 use in plinth protection 75mm thick finished even and smooth without extra cement complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:2:4, type B-1 using 20mm graded stone aggregate laid in padding complete, all as specified and directed by Engineer-in-Charge.

M&L for Cement Concrete 1:2:4 Type B-0 (using 12.5 mm graded stone aggregate) as in roof kerb or mud stops rounded of chamfered on edge complete, all as specified and directed by Engineer-in-Charge.

M&L for prepation of plastered /concrete surfaces of roof and applying the under mentioned course of roof treatment complete all as specified and directed by engineer- in charge:-(a) surface shallbe throughly wire brushed , cleaned, washed, driedup properly and apply evenly a bituminous primer coat @0.4 itr/sqm over concrete/plastered roof surface. (b) Laying of 3mm thick APP membrane sheet (min weight 3 kg/sqm) consisting of a core of 160gms/sqm polyster non woven fabric mat protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method .APP membrane will normally be laid in length at right angle to the direction slope. The over lap shall be min 100mm on logitudinal direction and 150mm on the transverse direction includiing cutting, grooves etc. (c)Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame. (d) Painting with two coats of water proofing paint with aluminium finish. (e) 20mm thick screed bed in CM 1:4.

S&F PVC (SWR) pipes 110mm single socketed in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc complete, all as specified and directed by Engineer-in-Charge.

S&F PVC SWR bends 110mm) complete, all as specified and as directed by Engineer-in-Charge.

Material and labour for false ceilings using GI snap grid system with roll-formed out of hot dip galvanised steel caping (powder coated) main runner 38 x 24 mm , cross Tee 29 x 24 mm and wall angle 24 x 24 mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceiling board , pre painted Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions size 595 x 595mmx 4mm thick any texture (Lake and Hill, oceaniccascade or Electra) as approved by GE complete all as specified and as directed by Engineer-in-Charge.

S&F aluminium powder coated deco grills confirming to DG-104 grade complete all as specified and as directed by Engineer-in-Charge.

M&L for sand filling under floor or in foundation, below paver block including watering & consolidation complete, all as specified and directed by Engineer-in-Charge.

S&F precast machine pressed PCC interlocking paver block of 80 mm thickness, M-40 grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved complete, all as specified and directed by Engineer-in-Charge.

S&F steel water tubing, galvanised, medium grade, ISI marked with and including all fittings and fixed on walls and ceilings or in floor bore of pipe 15mm complete, all as specified and directed by Engineer-in-Charge.

S&F steel water tubing, galvanised, medium grade, ISI marked with and including all fittings and fixed on walls and ceilings or in floor bore of pipe 20mm complete, all as specified and directed by Engineer-in-Charge.

S&F 15 mm stop valves, fancy type chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, all as specified and directed by Engineer-in-Charge.

S&F Brass chromium plated bottles traps 32 mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, all as specified and directed by Engineer-in-Charge.

S & F 15mm dia Jet spray straight with CP tube 1.00m long complete, all as specified and as directed by Engineer-in-Charge.

S&F Towel Ring of chromium plated fixed with brass screws and wooden/plastic cleats, all as specified and directed by Engineer-in-Charge.

S&F Tubular towel rail chromium plated, 20mm dia, D type, 60cm long between flanges complete, all as specified and as directed by Engineer-in-Charge.

S & F CP Soap dish complete, all as specified and directed by Engineer-in-Charge.

S & F CP paper holder complete, all as specified and directed by Engineer-in-Charge.

S&F concealed stop cock 15 mm bore with adjustable wall flange complete all as specified complete, all as specified and directed by Engineer-in-Charge.

S&F CP bib cock 15 mm bore with wall flange, fancy type long body complete, all as specified and directed by Engineer-in-Charge.

S&F pillar cock, cast copper alloy, chromium plated, fancy type for 15mm bore pipe complete, all as specified and directed by Engineer-in-Charge.

S&F 15mm bore PVC connection 450mm long with brass nuts on both ends complete, all as specified and directed by Engineer-in-Charge.

S&F counter top oval wash basin, size - 450 x 400mm including waste coupling & PVC waste pipe complete, all as specified and directed by Engineer-in-Charge.

S&F vitreous china wash down water closet pan (Pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe)incl P or S trap etc complete, all as specified and directed by Engineer-in-Charge.

S&F plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete, all as specified and directed by Engineer-in-Charge.

S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and polyethylene of low or high density or PVC. 32 mm dia, for low level cistern.complete, all as specified and directed by Engineer-in-Charge.

S&F Vitreous china uninals, half stall type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe, all as specified and directed by Engineer-in-Charge.

S&F PVC SWR floor trap with grating including jointing with solvent cement 75 mm dia complete, all as specified and directed by Engineer-in-Charge.

M&L for 20 mm thick granite stone (any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment (1:2) to match the shade of stone including cutting and polishing as in floors laid over 15mm thick screed bed in cement mortar 1:6 on cooking platform complete, all as specified and directed by Engineer-in-Charge.

M&L for RCC nominal mix type B1, 1:2:4 (using 20mm graded stone aggregate) as in chajjas, slabs, beams and similar work incl necessary form work complete, all as specified and directed by Engineer-in-Charge.

S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.One side prelam and other side plain 18mm thick Celuka PVC ply for kitchen cabinet and cupboards shutter and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete, all as specified and directed by Engineer-in-Charge.

S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete, all as specified and directed by Engineer-in-Charge.

S&F factory made 5mm thik PVC sheet of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 5mm thick PVC sheet paneling for back side(wall side) and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete, all as specified and directed by Engineer-in-Charge.

S&F 38mm size Stainless Steel Piano hinges complete, all as specified and directed by Engineer-in-Charge.

M &L for 50 mm magnetic catches and fixed complete, all as specified and directed by Engineer-in-Charge.

S&F 100 mm size Stainless Steel handle complete, all as specified and directed by Engineer-in-Charge.

M&L for treating bottom and sides of excavation at the rate of 5 liters of emulsion per square metre of surface area complete, all as specified and directed by Engineer-in-Charge.

M&L for treating backfill in contact with foundation at the rate of 7.5 liters of emulsion per suare metre of vertical surface (Area of substructure in contact with backfill to be measured) complete, all as specified and directed by Engineer-in-Charge.

M&L for treating the top surface of filled earth at the rate of 5 liters of emulsion per square metre of surface complete, all as specified and directed by Engineer-in-Charge.

M&L for treating the soil under plinth protection at the rate of 5 liters of emulsion per square metre of surface area complete, all as specified and directed by Engineer-in-Charge.

M&L for treating the soil along with external perimeter of building at the rate of 2.25 liters of emulsion per metre of perimeter complete, all as specified and directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete and removing the debris out side MD land complete, all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced ) of any description and in any position not other wise specifically provided complete, all as specified and directed by Engineer-in-Charge.

Exavation in trenches in hard rock not exeeding 1.50m wide and not exeeding 1.50m depth for foundation etc or for shafts, wells, caspits, manholes, pier holes etc not exeeding 10Sqm on plan and not exeeding 1.5m in depth and getting out in hard rock complete, all as specified and directed by Engineer-in-Charge.

Plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes incl packing under and hauching against the side of pipes after they are laid and tested for 150mm bore SGSW pipes complete, all as specified and directed by Engineer-in-Charge.

S&F 150mm dia SGSW pipe laid in trenches and jointed as specified complete, all as specified and directed by Engineer-in-Charge.

S&F of cast iron soil, waste and vent pipes 75 mm bore in any length with or without ears, with cement joints, laid in trenches or in floors complete, all as specified and directed by Engineer-in-Charge.

M&L brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cm 1:4 complete, all as specified and directed by Engineer-in-Charge.

M&L cement concrete type B1 1:2:4 (20 mm graded aggregate) as in benching/copings complete, all as specified and directed by Engineer-in-Charge.

S&F factory made SFRC manhole/ drain cover (Grade M-25) heavy duty cover slab in rectangular shape of size as required, 80 mm thick incl MS Sheet 2mm thick and 80mm wide all around the cover complete all as specified and directed by Engr-in-charge.

BOQ PART-II (E/M WORKS)

M&L for light/fan.exhaust fan point wiring with single core of FRLS PVC insulated unsheathed ISI marked 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drwaing through in and including PVC conduit size of not less 20mm including conduit fittings and acessories concealed in wall/ ceiling or surface conduit wiring on ceiling/ wall terminated in flush metal box along with outer cover plate for mounting modular switch, socket and regulator along with provn of earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS ISI marked copper conductor of size 1.5 sqmm, one light point/C fan/ Exh fan controlled by one switch one way including cutting chassis for inserting PVC conduit and making good to disturbed surface all as to match with existing surface complete all as specified and directed by Engr-in-Charge.

All as per item No 2.01 above but for one 3 pin 5 amps socket outlet on the same board with other switchs complete, all as specified and directed by Engineer-in-Charge.

All as per item No 2.01 above but with 2.5 sqmm cable for independent bd one 3 pin 15 Amps socket outlet including S/C 2.5 sqmm PVC insulated copper conductor unsheathed 1100 V grade IS-694 FRLS cable for continuous earth wire connected to gang box of required size complete, all as specified and directed by Engineer-in-Charge.

S&F modular switch, 5/6 Amps, 1 module complete, all as specified and directed by Engineer-in-Charge.

S&F Modular Socket outlet, 6 Amps, 2/3 pin combined ; 2 module Complete, all as specified and directed by Engineer-in-Charge.

S & F Modular switch 16 Amps, 1 module Complete, all as specified and directed by Engineer-in-Charge.

S&F Modular Socket outlet, 6/16 Amps - 2/3 pin combined ; 2 module Complete all as specified and directed by Engineer-in-Charge.

S&F Modular Socket fan regulator, 120 W, 2 module Complete, all as specified and directed by Engineer-in-Charge.

S&F Modular white cover plate with frame 3 module Complete, all as specified and directed by Engineer-in-Charge.

S&F Modular white cover plate with frame 4 module Complete, all as specified and directed by Engineer-in-Charge.

S&F Modular white cover plate with frame 8 module Complete, all as specified and directed by Engineer-in-Charge.

Supply and fix flush mounting boxes 3 modular Complete, all as specified and directed by Engineer-in-Charge.

Supply and fix flush mounting boxes 4 modular Complete, all as specified and directed by Engineer-in-Charge.

Supply and fix flush mounting boxes 8 modular Complete, all as specified and directed by Engineer-in-Charge.

Supply and fix ceiling rose surface type backeite 65 x 50 mm with 3 terminals with ISI mark Complete, all as specified and directed by Engineer-in-Charge.

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provide for efficient heat dissipation and integrated electronic driver, 20 watt LED fitting with 100 lumen/watt, watt 6000k, 230 watts defused optics etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fiiting & testing complete, all as specified and directed by Engineer-in-Charge.

Supply and fixing wall mounted LED bulk head fittings 10 watt, 2700/6000k, 230 Volts, diffused optics etc complete with all accessories connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fiiting and testing complete, all as specified and directed by Engineer-in-Charge.

Supply and fixing ultra modern design architectural design 34/36 watt 2x2 recess LED, 6000k luminaire having glare free symmetrical illuminatiion complete, all as specified and directed by Engineer-In- Charge.

Supply and fix sheet metal enclosure with double door category of protection type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB SPN 240 Volts, 8 way complete, all as specified and directed by the Engineer- In- Charge.

S&F MCBs 10 KA breaking capacity, single pole, 240 Volts, 6 to 32 Amps C Curve capacity complete, all as specified and directed by Engineer-in-Charge.

S&F MCBs 10 KA breaking capacity, single pole and neutral 240 Volts, 40 Amps C Curve capacity complete all as specified and directed by Engineer-in-Charge.

S&F ceiling fan heavy duty 1200 mm sweep, 5 star rated, 230 volts, single phase including necessary fixing arrangement for proper fixing/hanging as per site requirement and copper conductor PVC sheathed 3 core cable from ceiling rose to fan connector complete, all as specified and directed by Engineer-in-Charge.

Supply and fixing Fresh air fan 250 mm sweep, PVC body heavy duty, 230 Volts with all accessories including provision of suitable cutting making hole suitable size and length of copper wire and ceiling rose complete, all as specified and directed by Engineer-in-Charge.

Supply, Laying, jointing, testing LT cable 1100 volts grade, PVC insulated armoured and PVC sheathed with stranded aluminium conductor heavy duty including cable glands, cable lugs etc to suit the cable size, laid in trenches, fixed along the poles or through G.I. pipe laid unders floors road etc, fixed cancealed in walls encased in G.I. Pipe etc, complete of size 10 sqmm, 2 core complete, all as specified and directed by Engineer-in-Charge.

Removing surplus soil to a distance not exceeding 50 mtr and deposting where directed at a level where not exceeding 1.5 mtr above the starting point complete, all as specified and directed by Engineer-in-Charge.

M&L for Sand cushioning for under ground cables provided with a layer of sand 8 cm deep before laying the cable and 15 cm depth after punning down and stretching the cable complete, all as specified and directed by Engineer-in-Charge.

Supply & Lay well burnt class 'B' bricks as mechanical protection to under ground cables laying with lenth of the bricks equal to the width of the trench complete, all as specified and directed by Engineer-in-Charge.

Supply & Laying GI tubing light grade of size 50 mm dia with all fitting for protecting the cables in trenches/floors/on poles/ in walls complete, all as specified and directed by Engineer-in-Charge.

M&L earthing and galvanised steel earth plate electrode 600x600x6.3 mm, burried vertically in ground (depth not less than 2.25 m deep below normal ground level) with top edge of plate vertically to a depth not less than 1.5 m below ground level, connected to galvanised steel earth lead wire 4.00 mm dia (8 SWG) of any length as reqd at site, by means of bolts, nuts, check nuts and washers of galvanised steel, earth lead wire encased in and including 15mm bore G.I. light grade pipe from earth plate upto pole, upto 2.40 M height from GL by means of and including 25x3 mm M.S.F.I Clamps, Bolts, Nuts and washers etc and G.I. earth lead wire DB with provision of charcoaldust and common salt packed all around the earth plate, including necessary excavation and earth work in any type of soil/strata and testing complete, all as specified and directed by Engineer-in-Charge.

Supply and install 1.5 TR hi wall split AC with indoor/outdoor units having copper condenser and evaporator coil complete with cordless remote control unit and with in built air ioniser and Plasma filter, CFC free for better indoor air quality with minimum 5 star rating inverter type and EER 4.5 of capacity 1.5 Ton fitted on wall and out door to be fixing on roof/wall at requirement place including all necessary electrical connections, bolting, nuts, clamping of 3 core copper cable, cooling tube, drain water pipe etc complete, all as specified and directed by Engineer-in-Charge.

Supply & Fix Voltage stablizer for automatic operation, single phase naturally air cool indoor type & designed for input variation between 170 V to 250 V with output voltage stablized at 230 V with accuracy of + 2.5% and capacity 4.0 KVA including fixing on wall and necessary electrical connections complete, all as specified and directed by Engineer-in-Charge.

M&L for sub main wiring with 2 run of 4 Sqmm cable one run of 4.0 sqmm PVC insulated unsheathed FRLS cable of multi stranded copper conductors 1100 Volts grade S-694 marked drwan through and including non metallic PVC conduit pipe medium grade ISI marked (not less than 20mm dia) along with fittings and accessories concealed on wall and surface on ceiling complete after wiring making good disturbed plastering by cement and applying white wash complete, all as specified and directed by Engineer-in-Charge.

Supply & Fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20-32 amps complete fixing on wall complete, all as specified and directed by Engineer-in-Charge.

M&L cross arms bracing supports clamps and back plates fabricated from structural steel sections including nuts bolts washers welding machines bending cold or hold drilled hole for bolts in any shape or size as indicated or directed and inclusive of primer coat one under and one finished coat of paint for installation of condensing unit on the wall/ ground complete, all as specified and directed by Engineer-in-Charge.

S&F low density polyethylene pipes (LDPE) of pressure rating 6 kg /cm2drain pipes of size 20 mm from indoor unit to exist point as per design including accessaries clmps fastners complete, all as specified and directed by Engineer-in-Charge.

M&L laying copper tubing of dia 1/2" including insulation and brazing work complete, all as specified and directed by Engineer-in-Charge.

M&L laying copper tubing of dia 1/4" including insulation and brazing work complete, all as specified and directed by Engineer-in-Charge.

S&F of 3 core flexible copper cable of size 2.5 sqmm 1100 V grade complete fixing on wall by clamping/securing including connections complete, all as specified and directed by Engineer-in-Charge.

shiv shanker enterprises

M/S LADPURIA ENTERPRISES

Hindustan Co.Co