Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.7 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹21.0 L+₹3.3 L (18.8%)Rejected-Finance | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹21.1 L+₹3.4 L (19.4%)Rejected-Finance | L3 | Rejected-Finance HIGHER BIDDER | |
| 4 | L4₹22.2 L+₹4.6 L (25.8%)Rejected-Finance 32 GOLA MAHAL P O BARRACKPORE DIST NORTH 24 PARGANAS PIN 700 120 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L4 | Rejected-Finance HIGHER BIDDER | |
| 5 | L5₹22.5 L+₹4.9 L (27.6%)Rejected-Finance 63E SASHAN KALITALA ROAD KOLKATA 700 008 | KOLKATA | WEST BENGAL | 700008 | L5 | Rejected-Finance HIGHER BIDDER |
Tender Value
₹21.1 L
EMD Value
₹42,160
Closing Date
2 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
VIVEK TANENIA
GARRISON ENGINEER (CENTRAL) KOLKATA T-37 NAPIER ROAD HASTING KOLKATA 700022
8509/E8
2022_MES_557583_1
8509/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
KOLKATA
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (C) KOLKATA
₹42,160
Yes
13 Feb 2023
13 Oct 2022
3 Nov 2022
13 Oct 2022
2 Nov 2022
27 Oct 2022
13 Oct 2022 - 26 Oct 2022
Amount
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc and getting out in soft/loose soil for laying of water supply pipe line/UG cable complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 Cm as in soft/loose soil complete all as specified and directed.
Removing excavated material ( soils of any type) not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.
Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed by the Engr-in-Charge. Note:- Thickness after punning down shall be measured for payment.
Supply and laying in trenches Bricks, sub class 'B' over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed by the Engr-in-Charge.
Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 16 Sqmm 4 core in trenches/ duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and as directed by the Engr-in-Charge.
S&F MCCB, 63Amps, 25kA, four pole with thermal and magnetic release adjustable type including necessary fixing arrangement , cutting welding of existing panel board as per site requirement and painting the disturbed part of panel as per the existing part of panel and electric connection complete all as specified and as directed. Make:- L&T Cat no- CM109OOP1OG/Siemens/ ABB/ Legrand/ Havells Cat No- IHLFNF063#
M&L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed.
M&L for Plain cement concrete 1:2:4, type B-0, (using 12.5 mm graded stone aggregate) as in benching, coping and brick steps including necessary form work complete all as specified and directed.
M&L Rendering 15mm thick in Cement Mortar 1:4 on other than fair faces of Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and Smooth without using Extra Cement complete all as specified and as directed.
S&F MCB 63 Amps, TP, 415 Volts , 'B' curve braking capacity 10 kA as directed by the Engr-in-Charge. Make:- Schneider/ ABB/Legrand/L&T
S&F RCCB double pole sensitivity 30 mA 2 moudle, 240 Volts ,40 Amp complete all as specified and directed by the Engr-in-Charge. Make:- L&T Cat No- BG204003 OR equivalent Schneider/ ABB/Legrand/
S&F Timer switch of analogue type for street light fittings, module 1 complete all as specified and as directed. Make:- L&T Cat part No. AUTS01ANA00 or equivalent model from make:- Schneider / ABB / SIEMENS
Supply and fixing commissioning & testing of 16 Mtr High Mast, Polygonal, Tapered, and Flange mounted type, Totally Hot Dip Galvanized with steel EQUIVALENT TO BSEN 10025 suitable for wind velocity as per IS 875 Part 3. The mast shaft shall be in Two sections with no circumferential weld and shall be stress fitted at site along with supply of accessories which includes heardframe, lantern carraige with 8 luminaire arms, SGDD winch of 500 Kg capacity with 6 mm wire ropes (2 wire rope system), lightning arrestor, Junction box, trailing cable of 5c x 2.5 sq mm size for single circuit, carraige supports suitable for mounting 08 Nos of 150 Watt LED luminaires for 16 Mtr High Mast. Supply and fixing of foundation accessories (one set of foundation accessories includes-8nos. M30x850 foundation bolts plus one anchor plate plus 50% template) and High Mast control panel as per standard for raising and lowering of high mast including single dial timer and including Supply and fixing of 150 Watt LED Flood Light Fittings. This also includes Design, casting of suitable open raft shallow RCC foundation with M-20 grade concrete suitable for safe soil bearing capacity of 10 T/Sq. mtr at the depth of 2.0 mtr below ground level alongwith supply of foundation bolts manufactured from special steel with nuts, washers, suitable size anchor plate, templates along with modern Engineering practices and provision of GI pipe earthing as per IS 3043 for High Mast with 4.5M long 40mm dia with GI strip 25x4mm with all materials & labour. Detail of High Mast section is as under:- (i) Bottom OAF-410 mm (ii) Top OAF-150 mm (iii) Bottom section thickness-4 mm (iv) Top section thickness-3 mm (v) Bottom section length=8300 mm (vi) Top section length=8300 mm (vii) Base plate of dia 570 mm x 25 mm thickness suitable for mounting 8 nos. of 150 Watt LED luminaires symmetrically Complete all as specefied and as directed by Engr-in-Charge. Note:- The quoted rate shall be deemed to include the following:- (i). Erection of the High Mast with the help of suitable equipments and wiring of luminaires with all wiring material & labour.(ii). Installation of control panel on suitable foundation including all material & labour. (iii) High mast should have indentification mark of manufacturer. (iv) Detailed technical data sheet shall be of specification attached. (v) High mast shall be installed by authorized company rep only (vi) Make of all the products of particular High Mast shall be of same company or recommended by the company Make of High Mast:- Surya/ Bajaj/ Phillips
M&L Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC casing caping of suitable size with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets, regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan /call bell point/ Switch socket outlet 5 amps complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board..
All as per item No. 16.00 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer-in-charge.
All as per item No. 16.00 here-in-before but one 3 pin 5 amps switch socket on the independent board with other switch complete all as specified and directed by Engineer-in-charge.
M&L fo Point wiring surface type with 2.5 sqmm (Nominal Area) PVC insulated stranded single core unsheathed FRLSH copper conductor cable 1100 Volts grade drawn through with and including PVC casing caping with all fittings and accessories of casing caping (like Tee, Bend etc) complete fixed to walls / ceiling etc with and including 2.5 Sqmm (nominal area) PVC insulated unsheathed, stranded, single core FRLSH copper cable as earth continuity wire connecting to common earth point (including supply & fixing of 1.6 mm thick pressed mild steel terminal boxes of suitable size with 3 mm thick PVC /plastic laminated sheet, top cover suitable sizes of brass screws and washers etc. for mounting sockets for 5 pin, 16 Amp Switch socket combination on independent board complete all as specified and directed.
S&F Switch piano, flush type, Single pole one way, 5/6 Amps 230/240 Volts, white/ivory finish complete all as specified and directed. Make:- Anchor Product Code No 14111/Legrand cat no-677200/ Havells cat no -AHFSXXW101/ Plaza / Cona.
S&F Ceiling rose, surface bakelite, 65 x 50 mm,three terminals complete all as specified and directed. Make:- Anchor Cat No 39040/3290/ Havells/ Plaza / Cona.
S&F Switch socket combination multi - purpose 3 pin, 15 amp and , 5 amp controlled by one switch flush type complete all as specified and as directed. Make:- Anchor Cat No- 14614/ Legrand cat no-673042/Havells/ Plaza / Cona.
S&F Socket outlet 3/5 pin, 6 Amps, 240 volt flush type complete all as specified and as directed. Make:-Anchor Cat No 14119/Legrand cat no-673044/ Havells Cat no- AHFKPXB063/Plaza / Cona.
S&F Switch socket combination 2 in 1 3pin switch socket outlet 5A on independent board complete all as specified and directed by engineer incharge.Make:- Anchor Cat No 14111 & 14119 /Legrand Cat no-677225/ Havells/ Plaza / Cona.
S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. Make:- Anchor Cat No 39538/51205/Havells cat no-AHLHAMW000/Legrand cat no- Plaza / Cona.
S&F Sainless steel utencil plate rack of size (775mmx 600mm x250) with 0.85mm stainless steel sheet with all fittings accessories complete all as specified and as directed. Make : / Hindustan/ Prayag Cat Part No- P-340/ Nirali / Jaynam at No-PRJ-104
SOVA ENTERPRISE
M/S SK PAUL
SENCO
DK Contractor
RST ENTERPRISE
m d yasin
BENGAL TRADERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .