SPECIAL REPAIR RENOVATION WORK IN TOILETS INCLUDING ELECTRICAL FITTING, LIGHTS IN TOILETS, 1 X LADIES , 1 X GENTS INSIDE MAIN BLDG OF SOM OF 50 I PARA BDE UNDER GE EAST AGRA

Amount

Taking down cement plaster on brick or stone walls, ceiling etc., including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Rendering 15 mm thick on other than fair faces of brick work in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note: water proofing compound shall be measured seprately.

M&L Rendering 10 mm thick on concrete surface of ceiling in cement mortar 1:3 compound finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat acrylic primer on surfaces walls complete all as specified and directed.

M&L Preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer (self primer) complete all as specified and directed.

M&L Preparing newly plastered surfaces of ceiling surface and applying three coats of white wash complete all as specified and directed

M&L complete removal of existing treatment from walls and applying two coats of oil bound distemper over a coat of acrylic primer complete all as specified and directed

M&L for preparing old plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

Supply only Integral water proofing compound

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any position n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L for Cement concrete 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in benching,coping , roof kerbs, mud stop, padding etc and similar work all as specified and directed.

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

M&L Brick work with sub-class `B' old size bricks, straight or curved on plan exceeding 6 Mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan in any radius in half brick thick, built in CM 1:6 complete all as specified & directed

S&F CP single lever basin mixer 15 mm with 450 mm braided connection pipe (without op up of model green, make Cera, or equivalent as approved by GE

S&F in repair urinal of size 265 x 335 x 695 mm (snow white) fixed to wall complete of model Caravan, Make Cera,or equivalent as approved by GE

S&F in repair one piece wash basin central top Oval shape with integrated half pedestal complete fixed to wall with rag bolts as per manufactures instructions of size 480 x 425 x 365 mm of model CISCO of make Cera, or equivalent as approved by GE

M&L granite (of any type) tiles 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and mirror polishing fixed with cement screed 15 mm thick in CM 1:4 over kitchen platform or anyother plateform there in complete all as specified and as directed

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm including suitable waste coupling CP and waste pipe fixed to drain pipe complete all as specified and directed.

S&F mild steel PVC coated drapery rods, 25mm internal diameter including decoratine type brackets and PVC curtain rings 8 Nos per RM including fixing arrangement with drilling holes in walls, brackets etc in repair complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

S&F plain, solid straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and complete confirming to Fe-290 (Gde E-165) all as specified and as directed.

S&F 35 mm thick factory made flush shutters solid core construction with particle board core and plywood face panels, commercial type on both side complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F 300 mm long aluminium alloy, anosised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts of extruded sectionscomplete all as specified and directed.

S&F 75 mm long butt hinges, medium weight, coled rolled mild steel and fixed complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges, medium weight, coled rolled mild steel and fixed complete all as specified and directed.

S & F 150 mm long Extruded handles, fabricated type, aluminium anodised complete all as specified and directed.

S&F Factory made solid PVC Door frame of size 62 mm x 32 mm made out of single piece extruded solid PVC Foam profile with homogenous fine cellular structure having 62mm width and 32mm thickness of density 600 Kg /Cbm manufactured by ISO-9001-2015 certified company frame willbe mitred and jointed with self driven and self tapping screws of size 50mm x8 mm &PVC solvent cement or fusion heat welding process all as per manufactures specification and direction of Engr- in -Charge.

S&F Factory made solid 30 mm thick PVC Door Shutter having the styles and rails shall be of size 75 mm x 30 mm having wall size 5 mm.Density 600 Kg /Cum manufactured by ISO-9001-2015 certified company , the styles top and bottom rails shall have one side wall thickness of 15mm integrally extruded on the hinge side of the profile for batter screw holding power .The styels and rails shall be reinforced with MS Tubes of size 33mm x 17mm x1mm painted with primer all four corners of reinforcement to be welded or sealed . Solid PVC extruded bidding (Push Fit Type ) will be set inside the styles and rails with a cavity to receive single piece extruded 5mm (+or - 0.25) thick plain PVC Sheet as panel. The syles and rails will be mitred cut and jointed with self driven and self tapping screws . Single piece extruded solid PVC lock rail of size 100mm x30 mm with the wall thickness 5mm and 15mm integrally extruded in the middle of the lock rails and fixed with style with the help of &PVC solvent cement and self driven self tapping screws of size 100x8mm complete all as per manufactures specification complete all as specified and directed.

S&F in repair health faucet ABS body with wall hook and 1 mtre SS braided rubber hose pipe of make :- Jaguar/Cera, or equivalent as approved by GE

S&F in repair stainless steel overhead rain shower 200 mm dia, make :- Jaguar/Cera, or equivalent as approved by GE

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non-skid jointless coloured ceramic tiles 7 to 8 mm thick (square /rectanglar) area of each tiles exceeding 0.11 but n exc 0.18 sqm, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed .

M&L for coloured glazed ceramic tiles in vertical surface 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed .

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connection complete all as specified and directed

S&F 15mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

Refixing old steel water tubing 15mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed.

Refixing old steel water tubing 20 mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed.

Cutting chases for pining in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings steps , cills, sunsheds, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exceeding 20 cm girth complete all as specified and directed.

M&L PCC 1:3:6 C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, path ( 75 mm thick ) finished even and fair complete all as specified and directed.

M&L 75m thick cement concrete ty pe B0 using 1:2:4 (20 mm graded stone aggregate as in path / floor finshing even and smooth without using extra cement complete all as specified and directed.

S&F in repair urinal partition of size 90 x 320 x 720 mm fixed to walls with necessary bolts as per manufactures instructions of model Corvin, make Cera, or equivalent as approved by GE

S&F in repair urinal spreader CP of make Cera, or equivalent as approved by GE

S&F in repair self closing angle cock pressmatic for urinal with wall flange and 200 mm connecting pipe of make Cera, or equivalent as approved by GE

S&F in repairs 10 ltrs capacity PVC flushing cistern with inlet ball valve and handle including brackets, rubber bush, washers etc complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S&F in 110 mm bore PVC (SWR) tee of any radius complete all as specified & directed.

S&F in repair PVC (SWR) junction, double equal or unequal 110mm dia complete all as specified and directed.

M&L Preparation of New or previously untreated wood and wood based surface of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

S&F joist, channel, angle or tee sections fixed independently without connecting plates etc cut to ordinary length and fixed as per directions Fe 410 W Gde complete all as specified and directed.

M&L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismandling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F in repairs 15 mm bore fancy type chromium plated stop valves, with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair one piece Europen type water closet (snow white) with seat cover and twin flush fittings including necessary traps and connection to drain and flushing pipe etc of size 710 x 390 x 790 mm. or equivalent as approved by GE

S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position 500 ltr capacity all as specified in SSR Part I including PVC ball falves (brass insert) for outer dia of pipes 25 mm complete all as specified and directed.

S&F in glass mirror 5 mm thick frame less bewel edge rectangular shape glass mirror with including 3 layer protective coating fixed to wall make Cera, or equivalent as approved by GE

Taking down carefully aluminum/copper point wiring (light fan socket or power) complete , including fixutre and fittings such as switches, sockets, regulators, lamp holders, luminaries, ceiling roses complete and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified and removing from site.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FR PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit not less than 20 mm dia with all accessories and FR PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth, including cutting and chasing of wall surface for laying PVC conduit and modular sunken box and connecting earth and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Make Polycab/Finolex/RR Kablel/Grandlay. Note :Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following :- (a) One light /fan point controlled by one switch

All as per item No 69.00 here-in-before but One 5 pin socket outlet 5/6 Amps on independent board

All as per item No 69.00 here-in- before but One 5 pin socket outlet 5/6 Amps on same board

All as per item No 69.00 here in before but with cable size 4 Sq mm for one 5 pin 15/16 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 4 sqmm all as specified and directed by Engr-in-Charge.

Supply and fix modular switch single pole one way 6 amps 240 volts with polycarbonate body all as specified and directed..

Supply and fix modular Switch single pole one way 16 amps 230 Volts with polycarbonate body all as specified and directed..

Supply and fix modular socket 6 amps 5 pin , 240 volts. with polycarbonate body all as specified and directed.

Supply and fix modular socket out let, 5 pin 16 amps multi purpose 2 in 1, 230 volts with polycarbonate body all as specified and directed..

S&F ceiling rose , 3 phase/PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals all as specified and directed.

S& F modular cover plate with metal frame (inner and outer) 3 module for mounting switch and sockets all as specified and as directed.

S& F modular cover plate with metal frame (inner and outer) 6 module for mounting switch and sockets all as specified and as directed.

S& F blank spacer plate for single module complete all as specified and directed.

S& F metal flush sunken boxex 3 module for mounting of module cover plate with metal frame all as specified and as directed. Make : Legrand Cat Pt No.6890 08 or equivalent in Havells/CONA

S& F metal flush sunken boxe 6 module for mounting of module cover plate with metal frame all as specified and as directed. Make : Legrand Cat Pt No.6890 10 or equivalent in Havells/CONA

S & F LED batten surface /wall mounted with specially designed powder coated aluminium housing , high optically efficient polycarbonate diffuser , in built electronic driver duly wired upto terminal block , power consumption is less than 20 W, luminarie lumen is greater than 2000 lms, system efficiecy is greater than 120lm /w , CRI is greater than 80 , LED Make : Nichia/Cree/Everlite/EClison/Osram/Lumiled with LED binning as per ANSI Bin C78.3777A, photo biological safety report as per IEC624718 & electrical insulation class 1, colour temp-5700K, Ingress protection IP 20, driver efficiency is greater than 85%, 50000 burning hours (min) as per L70 criteria, ambient, temp 0 to 500C, power factor is greater than 0.95 , THD is than 10%, surge protection is CM -2.5KV, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level is less than 60V DC as per IEC standard, with LM79& LM80 certification. all as specified and directed. Make : Cat Pt No LHFXCENNTN1W020 for box type fitting and Cat Pt No LHLDDCXCML8Q020 LED Tube Rod of Havells or equivalent in Bajaj/Philips/CG

S&F wall mounted Decorative ultra SS Rim round profile LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack, 9W, 600mm long complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed .(Make: Havells Cat No. LHEXACP5IN1W010 or equivalent in Philips/Bajaj/CG)

Supply & fix sheet metal enclosure MCB distribution board double door. Single pole & neutral 240 volts 8 way with IP-43 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification all as specified and directed. Make : Legrand/Schneider (Acti-9)/L&T/ABB/SIEMENS

Supply and fix MCB single pole 240 volts any rating from 2 amps, with rupturing capacity 10 KA `C' series including providing thimble for out going cables. Make : Cat Pt No 4085 83 of Legrand or equivalent in Schneider (Acti-9)/L&T/Hager .

Supply and fix MCB single pole 240 volts any rating from 32 amps, with rupturing capacity 10 KA `B' series including providing thimble for out going cables. Make : Cat Pt No 4085 90 of Legrand or equivalent in Schneider (Acti-9)/L&T/Hager .

Supply and fix in replacement MCB Single pole and neutral 240 volts any rating from 32 amps, with rupturing capacity 10 KA ` C' series, including providing thimble for out going cables. Make : Cat Pt No 4086 14 of Legrand or equivalent in Schneider (Acti-9)/L&T/Hager .

M & L for Earthing for poles and other machinery/eqpt using GI strip as earth lead and MS galvanized steel earth plate electrode 600x600x 6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate is not less than 1.5 mtr below normal ground level connected to galvanized iron strips 25x4mm with GI pipe, nuts, bolts and washers complete upto and including test point made out of 40x3mm GI flat, PCC pit of required size in PCC 1:2:4 type B1 and RCC cover with frame, charcoal, common salt15cm at round the earth plate watering pipe 20mm med grade/galvanized and 40mm dia GI pipe light grade for GI strip protected steel with funnel complete all as specified and directed as shown in electrical plate No 3 of SSR Part-I 2009. (for LT feeder piler box)

S & F Air refresher ventilating 200 mm Sweep complete with accessories AC 230V all as specified and directed. Make : Havells or equivalent in Bajaj/Usha/Crompton

S & F Wall mounting fan AC single phase 230/240 volt of size 450 mm sweep with PVC body and PVC louvers 1400 rpm complete all as specified and as directed. Make : Havells ((Turbo force SP ) or equivalent in Usha/Baja/CG

Supply and fixing electric water heater storage type 230 Volts 50Hz AC supply of capacity 25 ltrs, ISI marked, with 5 star rating having inner tank made of extra thick superior cold rolled steel, Puf insulation, outer tank of feroglas with single weld line design and external thermostat having range 25 to 75°C all as required at site or directed. Make:- Cat Pt No GHWAMGSIB025 ( MONZA DX ) of Havells or equivalent of make Racold/Venus/

Supply and lay in trenches/fixed to walls/poles etc and commissioning XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor 1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core and all as directed by Engineer-in-Charge. Make : Havells/Polycab/Grandlay

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 in depth for foundation of poles/cable, stay assy etc. and getting out in any type of soil complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and directed.

Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and directed.

Supply and laying new dry river sand laid in trenches 8cm below the cable and 15cm above the cable and punned to 18cm as cable cushioning and covering all as directed. Note:- Punned quantity will be measured paid at this item.

S & L brick covering with width equil to length of brick as the mechanical protection to cable with well burned sub class 'B' old size brick laid in trenches flat complete all as specified and directed.

Supply and lay Tubes,'light grade' galvansized 40mm dia for cable protection with all fitting and fixed complete to walls and ceiling or laid in floors/road crossing complete all as specified and directed.

S&F PVC pipe connection 15 mm with PTMT nuts of length 450 mm complete all as specified and directed.

M/S MAKHIJA TRADERS