ADDITIONAL AND ALTERATION OF ICU/ HDU IN CIVIL HOSPITAL AT FATEHABAD (SPECIAL REPAIR TO NITCH AND PDG. STREET/ SECUITY LIGHT ONLY IN CIVIL HOSPITAL FATEHABAD).

Amount

MCCB ,DISTRIBUTION BOARDS, MCB's, RCCB's, CHANGE OVER etc. (HSR 23.22) Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. (HSR 23.22.1) TRIPLE POLE MCCB 200 to 250 Amp (HSR 23.22.1.5)

4 pole MCCB 6 amp to 100 amp ( For street Light ) (HSR 23.22.1.9)

4 pole MCCB 200 to 250 amp (HSR 23.22.1.11)

MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings (HSR 23.22.2) MCCB up to 125 A FP ( For street Light ) (HSR 23.22.2.1)

MCCB up to 250 A FP (HSR 23.22.2.2)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to to the entire satisfaction of the Engineer-in-Charge of the work. (HSR 23.22.4) TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing) (HSR 23.22.4.7)

TPN DB Horizontal type Double Door 12 way ( 8 incoming 3phase*12 outgoing) (HSR 23.22.4.8).

Supply and erection of miniature circuit Breaker/isolator 240/415 V in the existing distribution board including making necessary connections:- (HSR 23.22.5) 6 amp. to 32 amp Single Pole (HSR 23.22.5.1)

40 amp to 63 amp. MCB's TRIPLE POLE (HSR 23.22.5.6)

40 amp to 63 amp. MCB's FOUR POLE (HSR 23.22.5.8)

SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings (HSR 23.22.8) 100 amp 415 volts (HSr 23.22.8.2)

MISCELLANEOUS (HSR 23.23) Supply and fixing Galvanised Iron flexible pipe complete with socket nipples and check nuts etc. at both ends (Up to length of one P/M):- (HSr 23.23.1) Size 25 mm dia (HSR 23.23.1.3)

Supply and election of Goodridge Almirante type M.S. pedestal made of 50 mm *50 mm * 6 mm angle Iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and looking arrangement with the Godrich type handle including round bars. The to covering should have a downward overhang of 75 mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four No’s. holes to discharge the heat produced by suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embedded upto the entire depth in 1:2:4 cement concrete block, projected 75 mm all around the pedestal and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work. (HSR 23.27) M.S. pedestal of size 600 mm wide, 750 mm high, 300 mm deep and bottom totally open , duly embedded in cement concrete block of size 900 mm*450 mm*200 mm above ground level , having a base of size 900 mm* 600 mm* 250 mm below ground level. (HSR 23.27.1)

EARTHING AND LIGHTENING ARRESTOR (HSR 24.1) Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. (HSr 24.1.1)

Extra for using salt and char coal/coke for pipe earth electrode as required. (HSR 24.1.2)

Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required. (HSR 24.1.13)

Laying of underground cable in pipe/ existing open/closed tench tc as required. (HSR 24.2.4) 16 Sq mm to 35 sqmm 2 to 4 Core. (HSR 24.2.4.2)

Supply and erection of Single Phase weather proof M.S. box of size 20 cm x 15 cm x 10 cm with hinged cover made of 2 mm thick MS sheet, locking arrangements, housed in wall/fixed on pole , including the cost of 1 no 4 way 16 A bakellite connector, 1 no. 6 amp SP MCB and 1 Nos. 16 amp. neutral links fixed on bakellite sheet in the M.S. box including painting and necessary connections.(HSR 24.4.5)

Supply and erection of suitable compression type brass cable glands for underground Cable :- (HSR 24.2.7) 10 sqmm to 16 sqmm Cable 2 to 4 Core (HSR 24.2.7.2)

25 sqmm to 50 sqmm Cable 2 to 4 Core (HSR 24.2.7.3)

Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work. (HSR 24.2.8) 25 sqmm (HSR 24.2.8.5)

35 sqmm (HSR 24.2.8.6)

95 sqmm (HSR 24.2.8.9)

120 sqmm (HSr 24.2.8.10)

150 sqmm (HSR 24.2.8.11)

Supply and erection of cable route marker made of 50 cm long 10 mm dia M.S. Rod welded/revitted at the top with 10 cm dia 3 mm thick MS plate inscribed with 'cable' word on it, having a cross arm 30 cm long of the same dia welded at the bottom, in exiting trench 45 cm below ground level. (HSR 22.2.10)

STREET LIGHT (HSR 24.4) Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 1 O A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1 :5: 1 O of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge.(HSR 24.4.8.4) 7 Mtr Long pole with top dia 75 0mm and bottom dia 150 mm with base plate of size 300 x 300 x 20 mm (HSR 24.4.8.5)

Supply and erection of weather proof M.S. box size 20 cm * 15 cm * 10 cm covered with 3.00 mm thick M.S. sheet hinged cover, locking arrangement, housed in wall, including the cost of 1 no. 16 amp. 415 volts SPMCB and 2 no. 63 amp. 415 volts neutral links fixed on hard wood board/ 10 mm Bakelite sheet in the M.S. box including painting and necessary connections. (HSR 24.4.16)

MISCELLANEOUS ITEMS (HSR 24.5) Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts markd with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect upto the entire satisfaction of Engineer- in-Charge.(HSR 24.5.1) Submersible Copper Cable 3 Core 1.5 sqmm (HSR 24.5.1.1)

Submersible Copper Cable 3 Core 2.5 sqmm (HSR 24.5.1.2)

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia. (HSR 24.5.2.3)

DISMANTLING (HSR 24.6) Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.(HSR 24.6.3)

CEILING FAN/ EXHAUST FAN Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge. (HSR 20.71) 48" (1200mm) (HSR 20.71.1)

Non Schedule items:- Supply and erection of underground Aluminum Armoured cable XLPE insulated loose in existing pipe or trenches complete with necessary connection. Make RR / Havells / Polycab. 16 Sq. mm 2 Core Cable .

25 Sq. mm 4 Core Cable .

Non Schedule items:- Supply & Erection of Single arms bracket made of 32/50mm dia GI pipe B class ISI 1.20 mtr. Long with coller pipe (GI) 75mm dia 60cm Long top covered with ornamental cap duly welded, painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Bracket duly erected on existing 7/9 Mtr. High Octagonal pole.

Non Schedule items:- Supply & Erection of Square bracket made of 50mm dia GI pipe B class ISI 1.2 mtr. Long Each side with central support with coller pipe (GI) 75mm dia 60cm Long top covered with ornamental cap duly welded, painted 2 coats of aluminum paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Bracket duly erected on existing 7/9 Mtr. High Octagonal pole.

Non Schedule items:- S/E of 60 W LED Street light fitting > 110 Lumens per Watt Philips/ Havell's/ Hallonix/ Bajaj make in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

Non Schedule items:- S/E of 150 W LED Flood light luminaries with high power LED 110 Lumens per Watt Philips / Havell's / Bajaj / Wipro make in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. . Make: Philips / Wipro/ Bajaj/ Havell's/ Hallonix.

Non Schedule items:- Supply/ errection/ testing / commissioning of Timelite Distribution board street light panel of 40 amp 3 pole / 230 Volts with astronomical time switch having suitable size of 1 No. 40 amp TPN MCB, 1 no. 40 amp TP contactor, 1 HRC fuse , 1 Indicator & 2 No. TP MCB 40 amp with overvoltage/undervoltage protection having IP 52 Degree protection all items should be of same make / manufacturer including padestal, including making connection and petty material required to complete the job in all respect upto the entire satisfaction of Engineer-inCharge of the work. (Make:- IndoAsian(TL040ASO)/ Havell's/ Standard).

Virender Singh prop. Balaji electric company

MANYA ENTERPRISES

The Darba Kalan Shila Coop L/C Society Ltd.

M/S GARG ELECTRICAL