CA NO GE/C-23/2020-21 REPAIR TO ELECTRICAL APPLIANCES SUCH AS CEILING FAN EXHAUST FAN GEYSERS INCLUDING CERTAIN MISC E/M WORKS UNDER GE (CENTRAL) DELHI CANTT-10

Amount

Refixing of Ceiling fan / exhaust fan/ fresh air/ Wall mounted fan including taking down after necessary repairs/ replacement of unserviceable/ wornout part and testing the same as per entire satisfaction of Engr-in- Charge complete all as specified and directed.

Taking down carefully geysers 25/35/50 ltrs capacity opening for inspection reassembling and re-fixing in position after carrying out repairs rates included for replacement of pressed rubber gasket nuts, bolts etc complete all as specified and directed by Engineer-in-Charge. Note- Spare Parts such as tank, apparatus plate, outer body shall be measured and paid separately under relevant item of supply only.

Taking down carefully old unserviceable heating element, thermostat, connection pipe, from geyger of any storage capacity and make complete all as specified and directed by Engineer-in-Charge.

Taking down carefully old unserviceable sheet metal enclosure of any capacity and make complete all as specified and directed by Engineer-in-Charge.

M&L for opening up the winding of ceiling fan 1200 mm sweep any make and type and rewinding with super enamelled copper winding wire,wraping insulating material, insertion and varnishing well including drying complete. Taking down and testing of the ceiling fan after refixing in position to the entire satisfaction of Engr-in-Charge.

All as per item No 5 above but 1400mm sweep complete. Taking down and testing of the ceiling fan after refixing in position to the entire satisfaction of Engr-in-Charge.

M&L for opening up the winding of Exhaust fan 225/300 mm sweep any make and type and rewinding with super enamelled copper winding wire,wraping insulating material, insertion and varnishing well including drying complete. Taking down and testing of the exhaust fan after refixing in position to the entire satisfaction of Engr-in-Charge.

All as per item No 7 but 450mm sweep complete. Taking down and testing of the exhaust fan after refixing in position to the entire satisfaction of Engr-in-Charge.

M&L for opening up the winding of wall mounted fan 250/300 mm sweep any make and type and rewinding with super enamelled copper winding wire,wraping insulating material, insertion and varnishing well including drying complete. Taking down and testing of the wall mounted fan after refixing in position to the entire satisfaction of Engr-in-Charge.

S&F in replacement Ceiling fan blade suitable for 1200mm sweep of any make with suitable size as per site requirement complete all as specified and directed by Edngineer-in-Charge. (As per sample)

S&F in replacement Ceiling fan blade suitable for 1400mm sweep of any make with suitable size as per site requirement complete all as specified and directed by Edngineer-in-Charge.(As per sample)

S&F in replacement exhaust fan Metal blade suitable for 225/300mm sweep of any make with suitable size of split pin as per site requirement complete all as specified and directed by Edngineer-in-Charge.(As per sample)

All as per item No 12 but 450mm sweep complete all as specified and directed.(As per sample)

S&F PVC canopy upper and lower of celing fan of any make & size complete with nuts, bolts & washers as per sample approved (As per sample) complete all as specified and directed by Edngineer-in-Charge.

Taking down old unserviceable down rod and supply and fix 1.5 mtr long down rod duly made out off Mild steel including taking down & refixing of existing ceiling fan of any sweep and make and making connection from ceiling rose to PVC connector complete all as specified and directed by Engineer-in-Charge.

S&F in replacement ceiling fan down rod 0.6 mtr long duly made out off mild steel including rubber bush nut, bolt, washer and split pin complete all as specified and directed by Engineer-in-Charge.

S&F in replacement capacitor of 1.0 MFD complete all as specified and directed by Engineer-in-Charge. Make : Orient/Epcos/Havells.

S&F in replacement capacitor of 2.5 MFD complete all as specified and directed by Engineer-in-Charge. Make :Orient/Epcos/Havells.

S&F in replacement capacitor 3.15 MFD complete all as specified and directed by Engineer-in-Charge. Make : Orient/Epcos/Havells.

S&F in replacement capacitor 4.0 MFD complete all as specified and directed by Engineer-in-Charge. Make : Orient/Epcos/Havells.

S&F in replacement capacitor 6.0 MFD complete all as specified and directed by Engineer-in-Charge. Make : Orient/Epcos/Havells.

Supply only ball bearing No. 6202 complete all as specified and directed by Engineer-in-Charge. Make: SKF/NBC/TATA

Supply only ball bearing No. 6203 complete all as specified and directed by Engineer-in-Charge. Make: SKF/NBC/TATA

Supply only gun metal bush of any size and make sutiable for ceiling fans 1200/1400 mm complete all as specified and directed by Engineer-in-Charge.

Supply only worn out shaft, beyond economical repair of existing ceiling fan any make, type or size as per original one ceiling/exhaust fan complete all as specified and directed by Engineer-in-Charge.

S&F in replacement PVC fresh air fan blade suitable for 250/200 mm size with all fixing accessories complete all as specified and directed by Engineer-in-Charge.

M & L for painting of ceiling fans , in situ with synthetic enamel paint by spraying including filling cavities with filler, one or more coat to achieve even and smooth surface after cleaning all dust etc.and endorsement of fan no.with black synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L for painting of exhaust fans complete, in situ with synthetic enemel paint by spraying including filling cavities with filler, one coat after cleaning all dust etccomplete all as specified and directed by Engineer-in-Charge.

S&F in replacement PVC cable copper conductor multi strandrad flexible 23/.0076 twin core and making connections from ceiling rose to fan complete all as specified and directed by Engineer-in-Charge. Make :Plaza/ Finolex.

S&F Fresh air fan motor of capacity 1/6 HP 230 volts, 50 Hz, AC supply suitable for 250/200 mm size Fresh air fan as per sample complete all as specified and directed by Engineer-in-Charge.

Supply only exhaust fan motor capacity 1/4 HP 230 volts suitable for 230 mm size exhaust fan complete all as specified and directed by Engineer-in-Charge.

S&F Exhaust fan (Metal body) 300mm sweep with louvers including connecting with suitable size of copper conductor from ceiling rose to fan complete and making holes for fitting etc complete all as specified and directed by Engineer-in-Charge. Make: Havells/Bajaj/CG.

S&F fresh Air fan 250mm sweep with louvers including connecting with suitable size of copper conductor from ceiling rose to fan complete all as specified and directed by Edngineer-in-Charge. Make: Havells/Bajaj/CG.

Supply & Fix fan regulator electronic type 5 steps connecting complete all as specified and directed by Engineer-in-Charge. . Make Penta White/Havells rio/Plaza

Supply & fix Modular five stepped type electronic fan regulator 100W,2 module 360 degree rotatable type 230V AC complete all as specified and directed by Engineer in charge. Make:- Legrand Myrius/ Schneider Electric Opale/ ABB.

M & L non return valve 15mm dia (ISI Marked) for Geysers of 50/35/25 Ltr capacity including GI Socket,Nipple, elbow ,bend etc and connecting up complete all as specified and directed by Engineer-in-Charge.

M&L for fixing in replacement safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge.

M & L chromium plated copper connection pipe 18" long with two brass adopters and connecting up complete all as specified and directed by Engineer-in-Charge.

M & L chromium plated copper connection pipe 24" long with two brass adopters and connecting up complete all as specified and directed by Engineer-in-Charge.

S&F in replacement SS braided pipe of 12 mm (internal) suitable for hot/cold water, 600 mm long with brass nuts and rubber washers complete all as specified and directed by Engineer-in-Charge. Make - Havells / Jaquar / Bajaj.

S&F heating element of 2 KW triangular type with nut bolt washer complete all as specified and directed by Engineer-in-Charge. Make-THEETA/BAJAJ/USHA

S&F heating element of 2 KW circular type with nut bolt washer complete all as specified and directed by Engineer-in-Charge. Make-THEETA/BAJAJ/USHA

S&F heating element of 1.5 KW triangular type with nut bolt washer complete all as specified and directed by Engineer-in-Charge. . Make-THEETA/BAJAJ/USHA

S&F of thermostat for 25/35/50 ltrs capacity of geysers complete all as specified and directed by Engineer-in-Charge.

M & L neon lamp/indicator lamp for geysers complete all as specified and directed by Engineer-in-Charge.

M&L plug top, 3 pin, 10/20 amp earth metal clad (ISI marked) complete all as specified and directed by Engineer-in-Charge.

S&F socket 3 pin 10/20 amp earth metal clad (ISI marked) complete all as specified and directed by Engineer-in-Charge.

M&L for soldering and brazing inner copper tank 50/25/35 ltrs with brass solder and refixing complete (taking down and fixing shall be paid under item No 3 above) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement base plate assembly (confirming to ISI ) complete for 25/35 Ltrs capacity copper tank geyser including inlet, outlet and thermostat pipe with drain plug and screws for fixing the element inclusive of clamps for holding the elements with nut, bolts & air release valve suitable for any type/make of geysers installed at site complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement inner Steel tank for geysers of capacity 50 ltr as per existing of approved make complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement inner Steel tank for geysers of capacity 25/35 ltr as per existing of approved make complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement outer body/cover suitable for 25 ltr cap geyser made out of mild steel pre-treated and stove enamelled sheet of 18 SWG complete with top and bottom cover, rubber gasket, stead screw for fixing the top and bottom cover to outer body including two coat of white synthetic enamel paint over one coat of red oxide (spray painting) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement top cover for geysers (confirming to IS) suitable for any makes/capacity/type of geysers installed at site duly painted (spray) in two coats with enameled (Deco) paint of colour & shade complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement bottom cover for geysers (Confirming to IS) suitable for any make/capacity/type of geysers installed at site duly painted (spray) in two coats with enameled (Deco) paint of colour & shade as directed complete with inspection plate in two pieces.

Supply and fix in replacement wall mounted fan 400mm, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord system all as spd and directed by Engr-in-charge.

M & L in replacement fastner 100mm long & 6mm dia long with suitable size of nut for fixing geyser/Exhaust Fan complete all as specified and directed by Engineer-in-Charge.

M&L copper cable flexible 3 core PVC insulated of size 40/.0076 complete all as specified and directed by Engineer-in-Charge.

S & F sheet metal enclosure with 2 pin and earth plug and socket complete with and including MCB 10 Amps 240 volts heavy duty complete all as specified and directed by Engineer-in-Charge. Make:-Hager/Legrand/Siemens.

S & F sheet metal enclosure with 2 pin and earth plug and socket complete with and including MCB 20 Amps 240 volts heavy duty complete all as specified and directed by Engineer-in-Charge. Make:-Hager/Legrand/Siemens.

Supply and fix heating element suitable for solar water heater of capacity 3KW/4 KW single phase, 2 wire complete all as specified and directed by Engineer-in-Charge. Make- As Per Sample.

S&F factory made epoxy powder coated Distribution Board TPN 4 ways (TPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN MCCB 125/160 Amp as incomer and 12 SP or 4 No TP MCBs as outgoing complete all as specified and conforming to IS : 8623 complete all as specified and directed by Engineer-in-Charge.

S&F factory made epoxy powder coated Distribution Board SPN-12 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp rated copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one SPN- MCB 25/40 Amp as incomer and 10 SP MCBs outgoing complete all as specified and conforming to IS : 8623 complete all as specified and directed by Engineer-in-Charge.

S&F factory made epoxy powder coated Distribution Board SPN-8 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp rated copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one SPN- MCB 25/40 Amp as incomer and 10 SP MCBs outgoing complete all as specified and conforming to IS : 8623 complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement MCCB 160 Amp, 16 KA, 415 Volts 4 pole with copper lugs complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement MCCB 125 Amp,16 KA, 415 Volts 4 pole with copper lugs complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement MCCB 100 Amp,16 KA, 415 Volts 4 pole with copper lugs complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement MCCB 63 Amp,16 KA, 415 Volts 4 pole with copper lugs complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement MCCB 250 Amp, 16 KA, 415 Volts 4 pole with copper lugs complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement MCB SPN 32- 63 Amps, 240 Volts, 10 KA capacity C' curve complete all as specified and directed by Engineer-in-Charge.

S&F in replacement MCB SP 6-32 Amps 240 volts curve 'C' series 10 KA 50 HZ complete all as specified and directed by Engineer-in-Charge.

Note :- Total amount of Sch of credit is Rs 87828.00 as per Sch of credit. Net contract sum shall be total quoted amount of bidder (-) amount of Sch of credit.

M/s Shubh Enterprises

KRISHANA ELECTRIC WORKS

Pall Associates

M/S.Bhupinder Trading Company

M/S Blues Developers Pvt. ltd