GE 861 EWS-18 (T)/2025-26

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in metre complete all as specified and directed by Engineer-in-Charge.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

Dismantling timber scantlings (unframed) in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section In framed work complete all as specified and directed by Engineer-in-Charge.

Taking downcement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engineer-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L for coloured joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engineer-in-Charge.

M&L for Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering of cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L for 2nd class hardwood Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads sizes exc 13 sqcm but n exc 25 sqcm in sectional area complete all as specified and as directed by Engineer-in-Charge.

S&F 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work on ceiling complete all as specified and directed by Engineer-in-Charge.

S&F 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work on Wall panalling complete all as specified and directed by Engineer-in-Charge.

M&L for 2nd class hardwood Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads sizes exc 6 sqcm but n exc 13 sqcm in sectional area complete all as specified and as directed by Engineer-in-Charge.

M&L for 2nd class hardwood Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads sizes n exc 03 sqcm in sectional area complete all as specified and as directed by Engineer-in-Charge.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with cement mortar (1:4) and finished even and smooth (without using extra cement) complete all as specified and as directed by Engineer-in-Charge.

M&L for Rendering 15mm thick on fair faces or other than fair faces brick work or concrete surfaces with cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified and as directed byEngineer-in-Charge.

M&L including for preparation of newly plastered surface of wall and applying three coats of white wash above skirting and dado complete all as specified and as directed by Engineer-in-Charge.

M&L including for preparation of newly plastered surface of wall and applying two coats of cement based paint over a coats of chalk white primer complete all as secified and as directed by Enigneer-in-Charge.

M&L including for preparation of old decorative surface of wall, with preparation and complete removing of external treatment and applying three coats of white wash over a 3mm thick wall care putty complete all as secified and as directed by Enigneer-in-Charge.

S&F in repair 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-Charge.

S&F in repair 100mm long Butt hinges, Medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engineer-in-Charge.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed by Engineer-in-Charge.

S&F Plain, solid, 2nd class hardwood straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 30mm thick 2nd class hard wood Glazed and skeleton window shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.

S&F 30mm thick 2nd class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.

S&F 30mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.

M&L including preparation of newly wooden surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint overr a coat of pink primer cmplete all as speified and as directed by Engineer-In-charge

S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as speified and as directed by Engineer-In-charge

S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as speified and as directed by Engineer-In-charge

S&F 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as speified and as directed by Engineer-In-charge

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as speified and as directed by Engineer-In-charge

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as speified and as directed by Engineer-In-charge

S&F 75mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as speified and as directed by Engineer-In-charge

S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as speified and as directed by Engineer-In-charge

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as speified and as directed by Engineer-In-charge

S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete complete all as speified and as directed by Engineer-in-charge

S&F 100mm long Extruded aluminium alloy handles, fabricated type, anodised complete complete all as speified and as directed by Engineer-in-charge

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as speified and as directed by Engineer-in-charge

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as speified and as directed by Engineer-In-charge

S&F in repair 15mm dia Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

S&F 15mm dia Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F 16mm dia 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenchesTubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous China wash basin, white, flat back, size 630x450mm excluding ditto but including brackets complete all as specified and directed by Engineer-in-Charge.

S&F in 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified complete all as specified and directed by Engineer-in-Charge.

Dismantling water tanks 1000 ltrs capacit and removing to store complete all as specified complete all as specified and directed by Engineer-in-Charge.

S&F 1000 ltrs capapciy Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified complete all as specified and directed by Engineer-in-Charge.

Dismantling water tanks 500 ltrs capacit and removing to store complete all as specified complete all as specified and directed by Engineer-in-Charge.

S&F 500 ltrs capapciy Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified complete all as specified and directed by Engineer-in-Charge.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed of cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

Supplied & fixed 25mm 2nd class hard wood boarding, in wall panalling with nails in any situation (except flooring and skirting) Planed one side and edges tongued and grooved or rebatedcomplete all as specified and as directed by Engineer-in-Charge.

S&F 25mm thick boarding in floor and skirting planed one side & edges tongued and grooved or rebated, and fixed with nails complete all as specified and as directed by Engineer-in-Charge.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

Supply and fix ceramic floor mounted english type western water closet single piece make CERA item code No A1014110, Tuscany white S-220, size 640x350x770mm rectangular in size, complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully aluminium/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing and keeping items aside in safe custody for reuse such as regulators, light fitting, MCBs all as specified and directed.

M & L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per srl item No-70 here in above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No-70 here in above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and as directed by Engineer-in-Charge.

Description all as per item No 70 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing repacement switch piano flush type, 15 / 16 Amps single pole, one way 230 volts complete all as specified and as directed by Engineer-in-Charge.

M&L for switch socket combination out let 5 amps 5 pin flush type, 230 volts complete all as specified and as directed by Engineer-in-Charge.

M&L for switch socket combination out let, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing socket out let, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and as directed by Engineer-in-Charge.

S&F in repacement decorative ultra slim linear LED 18 Watt 4' long warm/White colour lighting fixture with extruded al heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings complete all as specified and as directed by Engineer-in-Charge.

S&F in repacemen LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing repacement LED Lamp 9/10 W complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED Lamp 0 W complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED Lamp 12 W complete all as specified and as directed by Engineer-in-Charge.

S&F factory made sheet metal steel distribution board TPN 4way dooble door type 415 volt 50 HZ AC with space suitable for MCCB 4 pole complete all as specified and as directed by Engineer-in-Charge.

S&F in repacement sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and as directed by Engineer-in-Charge.

S&F in repacement sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and as directed by Engineer-in-Charge.

S&F in repacement MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and as directed by Engineer-in-Charge.

S&F in repacement MCB, DP (Double Pole), AC, 240 volts, B series capacity 32/40 Amps 10kA and making connections complete all as specified and as directed by Engineer-in-Charge.

S&F in repacement MCB, DP (Double Pole), AC, 240 volts, B series capacity 63 Amps 10kA and making connections complete all as specified and as directed by Engineer-in-Charge.

S&F in repacement MCB, (T/ Pole), AC, 240 volts, B series capacity 63 Amps 10kA and making connections complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing including taking down old unserviceable 1100 volt grade flexible copper conductor cable 2.00 Sqmm two core complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing including taking down old unserviceable 1100 volt grade copper conductor cable single core 1 sqmm complete all as specified and as directed by Engineer-in-Charge.

All as per item No 96 above but size 1.5 Sqmm complete all as specified and as directed by Engineer-in-Charge.

All as per item No 96 above but size 2.5 Sqmm complete all as specified and as directed by Engineer-in-Charge.

S&F including taking down 1100 volts grade service cable with PVC insulated aluminium conductor 4 Sq mm nominal cross section 2 core all as specified and directed by engr-in-charge.

All as per item No 99 above but size 6 Sqmm 2 core complete all as specified and as directed by Engineer-in-Charge.

All as per item No 99 above but size 10 Sqmm 2 core complete all as specified and as directed by Engineer-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core complete including taking out to old u/s switch complete all as specified.

S&F in replacement Aluminium thimbles 10sqmm complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement Aluminium thimbles 25 sqmm complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement Aluminium thimbles 35 sqmm complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement Aluminium thimbles 6 sqmm complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engineer-in-Charge.

S&Fg in replacement LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing repacement Bed switch 5/6A complete all as specified and as directed by Engineer-in-Charge.

M&L for switch socket combination out let, 6 pin 5 and 15/16 amps multi purpose 2 in 01 flush type, 230 volts with box complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing repacement Plug top 5/6A complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing repacement Plug top 15/16 A complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing repacement casing caping 20 mm complete all as specified and as directed by Engineer-in-Charge.

S&F in repacement PVC gang box 4 Way complete all as specified and as directed by Engineer-in-Charge.

S&F in repalcement Connecting & testing Changeover switch 3 Phase 415V on load of rating 32 AMPS and including sheet enclouser complete including taking out to old U/S switch complete all specified and directed.

S&F in repalcement Connecting & testing Changeover switch 3 Phase 415V on load of rating 63 AMPS and including sheet enclouser complete including taking out to old U/S switch complete all as specified and as directed by Engineer-in-Charge.

S&F in repalcement Connecting & testing Changeover switch 3 Phase 415V on load of rating 100 AMPS and including sheet enclouser complete including taking out to old U/S switch complete all as specified and as directed by Engineer-in-Charge.

S&F tinned copper fuse wire for Transformers and the like as per existing gauge and rating complete all as specified and directed by Engineer-in-Charge.

Supply only PVC insulation electrical tape white colour, 19mm wide and 10 metre in length complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing exhaust fan 250 mm sweep PVC body with louver, 230 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and as directed by Engineer-in-Charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete as per existing surface, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing repacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ® complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing repacement wall fan 450mm high speed, 230 volts single phase with jerk free oscillation, smooth running, three blades, pull cords incduding fixing arrangement complete all as specified and as directed by Engineer-in-Charge.

M/S SHEIKH FEROOZ AHMAD (BID ID -3336191)

M/S NEW IQBAL ENTERPRISES (BID ID -3336730)