WBPWD/AE/MESD/NIQ-06/e-Q /2025-2026

Amount

Fixing only TPN switch fuse units in Sheet Steel enclosure with HRC fuses on angle iron frame on wall. For 415 V, 315 A.

Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. 250 A. (Make :- L&T).

Supply & Delivery of 1.1 KV Grade XLPE insulated aluminium conductor cable (Armoured) conforming to IS: 7098 / 1988 with its latest amendment of following size. (Make :- Havells / Gloster / Polycab).

4 Core 185 Sq.mm.

4 Core 150 Sq.mm.

2 Core 10 Sq.mm.

S & F GI Angle (triangular form by 40 x 40 x 5 mm angle, sides 2ft x 1.5 ft, support suitably welded) support embedded in wall, clamp for holding cables, making hole etc. as necy., mending good damages and painting.

Laying of cable as below, on existing Cable Tray / MS Angle Iron.

4 Core 185 Sq.mm.

4 Core 150 Sq.mm.

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying only Cable above 50 sqmm but not exceeding 400 sqmm through existing RCC / Hume / GI Pipe / open masonary trench for single, 2, 3, 3½ and 4 core.

Laying of cable of 4 core 185 sqmm on wall /surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting.

Laying of cable of 4 core 150 sqmm on wall /surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting.

Laying of cable upto 2 core 25 sqmm on wall / surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE / PVC armoured cables as below :

4 Core 185 Sq.mm.

4 Core 150 Sq.mm.

4 Core 25 Sq.mm.

2 Core 10 Sq.mm.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 Core 185 Sq.mm.

4 Core 150 Sq.mm.

4 Core 25 Sq.mm.

2 Core 10 Sq.mm.

Supplying & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing metarials as required. 65 mm dia.

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (2+10) Way Enclosure. (Make:- Siemens/ Schneider/ legrand).

Supplying and fixing 415V, 40A FP MCB of Breaking capacity 10 kA & C characteristics on DIN rail of existing DBs and necessary connection. (Make:- Siemens / Schneider / legrand).

Supplying and fixing 240 / 415 V change over (MCB module) of on DIN rail of existing DBs/ enclosure and necessary connection. 40A FP. (Make:- Siemens/ Schneider/ legrand).

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mtr. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below : By ISI - Medium GI pipe.

Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. Solid GI wire. No. 4 SWG.

Supply & Errection of 3" dia. 2 Mtr. Long heavy gauge G.I. Pipe (minipole) having 9” X 9” X 1/2" M.S. sole plate welded with drilled hole at bottom of the pole to be installed on roof of building with S.F. grounding bolts. Incl providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene / polythene pipe entry as directed for street light wiring, incl. S & F 25cmx15cmx10cm GI Loop box, 4mm th. & incl. drilled hole in pole incl Supply & fixing 50mm Dia 1.5mtr long detachable type GI Single arm bracket suitable for the pole head.The arm bracket shall be properly welded with 5mm thick stifner plate of pole sleeve for strengthening including properly fixing arfangement with the pole by bolt , nut, washer as per direction of EIC.

Inter connection of Street fittings by 3 x 1.5 Sq. mm. PVC insulated copper wire from loop box with 19 mm bore PVC polythine pipes as per direction of EIC.

S&F of 240V, 120 Watt LED Street Light including IP65 protection with CCT (5700-6500) & minimum Luminious efficacy >= 120 Lumen / Watt. with inbuilt SPD. (Make :- Philips, Cat. No. - BRP503 LED168 CW R3C PSU S1 or equivalent specifications with 5 years warranty of Bajaj / Wipro as per direction of EIC.

SUN ENTERPRISE (BID ID -6756523)

MAA BISHWESHWARI ELECTRICAL (BID ID -6763836)