Improvement of the existing jetty and public rain shelter at Upulei in Kendrapada District, Odisha

Dismantling of Prestressed / Reinforced cement concrete grade M-20 & above including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead and including cost of all labour, labour cess, T&P etc complete and as per direction of Engineer-in- Charge.

Chipping 50mm Average Thickness of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete with including cost of all labour, labour cess, T&P etc complete and as per direction of Engineer-in- Charge.

Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges upto 5M height and including cost of all labour, labour cess, T&P etc complete and as per direction of Engineer-in- Charge.

Earth work in excavation of hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth & including cost of all labour, labour cess, T&P etc complete and as per direction of Engineer-in- Charge. Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general

Earth work in filling of ordinary soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles & including cost & conveyance of all materials, labour, labour cess, T&P, royalty etc complete and as per direction of Engineer-in- Charge.

Providing, filling clean sand of approved quality in road work for construction of drainage layer and foundation trenches of structures in uniform layers, watered and rammed/ compacted as per approved drawing and technical specifications complete in all respect as per Section 900, 2100 and Clause 401 & 304 of MoRT&H specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, labour cess, T&P, royalty etc complete and as per direction of Engineer-in- Charge.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits (To bring the Soil not to be less than 10% CBR) grading to required slope and compacting at OMC by Vibratory Roller to meet the requirement of Table-300.2 as per clause 305 of MoRT&H Specifications for Road & Bridge works(5th Revision) complete including cost, conveyance, royalities, taxes of all materials, all labour, hire and running charges of all machineeries, T&P, Sundries etc complete as per specifications and direction of Engineer-in-charge.

Providing and laying Granular Sub-base with Grading-VI stone screening materials as per Table 400-1 as per approved drawing and technical specifications complete in all respect as per Section 900 and Clause 401 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, labour cess, T&P, royalty etc complete and as per direction of Engineer-in- Charge.

Providing dry lean cement concrete sub-base by with coarse and fine aggregates conforming to I:S 383, the size of coarse aggregate not exceeding 25mm, aggregate cement ratio not to exceed 15:1, aggregate gradation as per table 600-1, cement content not to be less than 150 Kg/Cum, mixing in concrete mixers with weigh batcher and transporting to work site, laying, spreading and compacting with PRR to the required thickness, finishing and curing as per approved drawing and specification complete in all respect as per Section 900 & Clause 601 of MoRT&H Specifications for Road and Bridge works (5th Revision) & including cost & conveyance of all materials, labour, labour cess, T&P, royalty etc complete and as per direction of Engineer-in- Charge.

Providing un-reinforced, dowel jointed cement concrete pavement over a prepared sub base as per approved mix design, using 43grade cement not less than 400kg/cum, coarse and fine aggregates conforming to I:S 383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip from paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler,separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per approved drawing and technical specification complete in all respect as per Section 900 & Clause 602 of MoRT&H Specifications for Road and Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.

Providing temporary stage/platform for boring and casting of piles during LTL & HTL, using 200mm mean dia Non-Sal Bullah for piling @1.00mtr c/c with 100mm mean dia Non-Sal Bullah bracings on both ways in 3 layers in middle and top layer with 38mm thick Non-Sal wooden planks fixed over 100mm mean dia Non-Sal Bullah reapers or any advance method of stagging as approved by the E.I.C. and dismantling the same after completion of the work and clear the debries including cost of transportation, labour, labour cess & all other taxes etc. complete in all respect as per direction of Engineer-in-Charge. (80% payment will be made after completion of staging work and 20% will be made after dismanting and clearing the same from work site)

Provide, bring to site and install in position at first pile location, all the plants and equipments necessary for bored cast in situ piling work and removing the said plants and equipments after completion of piling work including cost of transportation, labour, labour cess & all other taxes etc. complete in all respect as per direction of Engineer-in-Charge.

Shifting and setting up piling equipments required for piling work at each piling location, including all labour, labour cess, materials, fuel, tools & equipments etc.required to complete in all respect as per direction of Engineer-in-Charge ( No payment will be made for 1st pile )

Supplying, fabricating and providing Mild steel cylindrical liner of 6mm thick with shoe to the required depth including providing additional stiffener plates of 6 mm thick & 500 mm hight including cutting, bending, welding, transporting, alignment, placing in position and driving to required depth with all labour, labour cess, materials, tools, equipments etc. complete in all respect as per direction of Engineer-in-Charge. Note:- The stiffener shall be measured under this item. In case the soil strata found to be not good in the founding level, extra depth of liner may be provided as per site condition and measurement will be made to this effect.

Supplying, fabricating and placing of HYSD (FE-415)/ (FE-500) grade steel for pile cage including cutting , bending, binding & welding and laying in position with cost, conveyance, taxes of HYSD steel and binding wires 18 to 20 gauge with all labour,labour cess, T&P, cage lowering, equipments etc., complete in all respect as directed by the Engineer in charge. (Brand of Steel - SAIL/RNL/TATA/SHYAM ) Measurement of reinforcement will be made on lengthwise including hooks, if any, separately for different diameter as actually used in work, excluding overlaps, from the length so measured, the weight of reinforcement shall be calcuted in tonnes by multiplying the coefficient per unit length of bar as per code of the respective size of bars used on the basis of wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding & placing shall not be measured as the cost of these items has already been included in the analysis of rates for reinforcement as per rule in force .

Boring piles dia 450mm to the required depth through all types of soil strata including hard rock if any up to the founding level and stacking the bored soil at convenient place and transport to dispose the same at low lying area outside the working area with cleaning & washing the bore including cost of bentonite solution, labour, labour cess, tools, equipments, required to complete as directed by Engineer-in-Charge. Note:- 01. If the boring tool encounters rock at an elevation higher than the termination level of the pile indicated in the drawing then the boring shall be continued one metre into the rock from where the boring tool encounters rock first. 02. In case the soil stratum at the founding level is loose the Engineer or his representative may direct the contractor to carryout additional length of boring and payment for such additional work shall also be made under this item. 03. The sample of bored materials at regular interval shall be collect and produce for the verification of the Engineer or his representative at no extra cost. In the event of any dispute about the type of strata bored, the samples so collected shall be referred to an authorised laboratory / agency indentified by the Engineer and the decision of such authorised laboratory / agency is final and binding on both the parties. However the cost of such testing shall be borne by the contractor.

Providing and placing designed mix cast-in-situ RCC M-30 using 20 mm down graded black hard granite crusher broken chips for piles using tremmie method up to cut off level underneath the bentonite slurry including all sampling, testing and records with watering and laying as per IS codes 456 and 516. including cost, conveyance, royality, labour, Labour Cess, T&P and all other taxes etc. required to complete the work in all respect as per specification and as directed by Engineer-in-Charge. Note: Supply, fabrication of steel reinforcement shall be measured and paid under relevant item (Rate shall include the cost of providing additional concrete above the cut-off level)

Cutting and dressing pile heads to required line and level and /or as directed and stacking the debris at convenient place and transport the same to any low lying area outside the working area and all associated cleaning of projecting reinforcements including all labour, labour cess, materials, tools, equipments etc., complete as directed by Engineer-in-Charge.

Providing and laying P.C.C (1:3:6) using 4 cm down H.G.C.B. metal including mixing, hoisting, laying, compacting, curing, watering, rigid formwork, cost of materials, conveyance, taxes, royalty, labour, labour cess, T&P, etc., complete as directed by Engineer-in-Charge.

Providing and laying R.C.C M-30 grade using 20 mm down H.G.C.B. chips, including mixing, hoisting, laying, compacting, curing, watering, rigid formwork, cost of materials, conveyance, taxes, royalty, labour, labour cess, T&P etc., complete as directed by Engineer-in-Charge.

R.C.C. M-30 for Strip Footing including formworks.

R.C.C. M-30 for Column including formworks.

R.C.C. M-30 for Wall including formworks.

R.C.C. M-30 for Beam including formworks.

R.C.C. M-30 for Slab including shuttering cost.

Providing and laying R.C.C M-30 grade using 20 mm down H.G.C.B. chips, including mixing, hoisting, laying, compacting, curing, watering, rigid formwork, cost of materials, conveyance, taxes, royalty, labour, labour cess, T&P etc., complete as directed by Engineer-in-Charge. (Below Water & Extra time consuming for tidal influence)

R.C.C. M-30 for Pile Muff including formworks. (Below Water & Extra time consuming for tidal influence)

R.C.C. M-30 for Beam including formworks. (Below Water & Extra time consuming for tidal influence)

R.C.C. M-30 for Wall including formworks. (Below Water & Extra time consuming for tidal influence)

R.C.C. M-30 for Slab including formworks. (Below Water & Extra time consuming for tidal influence)

Supplying, fabricating & placing HYSD (FE-415/FE-500) steel including cutting, bending, binding, welding, placing, taxes, conveyance, binding wire, labour, labour cess, T&P etc., complete as directed by Engineer-in-Charge. (Brand: SAIL/ Vizag/TATA/SHYAM)

Supplying, fabricating & placing HYSD (FE-415/FE-500) steel including cutting, bending, binding, welding, placing, taxes, conveyance, binding wire, labour, labour cess, T&P etc., complete as directed by Engineer-in-Charge. (Brand: SAIL/ Vizag/ TATA/ SHYAM) (Below Water & Extra time consuming for tidal influence)

Supplying, fitting & fixing of M.S. Grill for doors, Windows & Ventilators of approved design including cost, conveyance, fabrication charges, labour, T&P including cost & conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Brick work with Fly Ash Bricks of size 23 cm × 11 cm × 8 cm, having crushing strength not less than 75 kg/cm² and dimensional tolerance of ± 8%, in cement mortar (1:3) in ground floor, including cost of scaffolding, staging charges, and conveyance of all materials, royalty, cost of labour, labour cess, T&P, and all incidental charges, complete as directed by the Engineer-in-Charge.

Brick work with Fly Ash Bricks of size 23 cm × 11 cm × 8 cm, having crushing strength not less than 75 kg/cm² and dimensional tolerance of ± 8%, in cement mortar (1:3) in first floor, including cost of scaffolding, staging charges, and conveyance of all materials, royalty, cost of labour, labour cess, T&P, and all incidental charges, complete as directed by the Engineer-in-Charge.

12 mm thick cement plaster in CM (1:3) over brick masonry, including cost of scaffolding, staging charges, conveyance of all materials, taxes, royalty, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge (Inside of Ground Floor)

12 mm thick cement plaster in CM (1:3) over brick masonry, including cost of scaffolding, staging charges, conveyance of all materials, taxes, royalty, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge (Outside of Ground Floor)

Supplying, fitting & fixing Granite Tile up to 0.10 Sqm. (10mm thick) in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement, 1 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost & conveyance of all materials, taxes, royalty, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Supplying, fitting & fixing 20cmx30cm / 20cm x20cm special plain/printed series ceramic wall tiles of premiumgrade having thickness 6.5mm to 6.7mm conforming to IS 13753 in Wall, treads or steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement, 1 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost, conveyance, all taxes etc. complete.

Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures including cost & conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures including cost & conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Priming one coat with approved Water bound cement primer including cost of Primer, cost of scaffolding, staging charges and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Finishing walls with Weather coat (ISI) of approved shade in new work two coats to give an even shade including cost of paint, cost of scaffolding, staging charges and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Painting 2 coats to walls with Plastic emulsion paint of approved shade on new work to give an even shade including cost of paint, cost of scaffolding, staging charges and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Priming one coat with any approved primer including cost of paint, cost of scaffolding, staging charges and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge. (For Iron work )

Painting two coats with approved paints on new iron work including cost of paint, cost of scaffolding, staging charges and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm including cost of paint, cost of scaffolding, staging charges and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Making soak pit 1.5m diameter 3.0 meter deep with 23 x 23 cm dray brick honey comb shaft with brick and S.W. drain pipe 100mm diameter, 1.8 m long complete as per standard design. With Flyask bricks including cost of materials and conveyance of all materials, royalty, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Providing and laying factory made 80 mm thick cement concrete interlocking paver blocks of M - 30 grade made by block making machine with strong vibratory compaction of approved size and shape laid over 50mm thick compacted bed of course sand layer including filling sand in the interstics/ joints, including cost conveyance of all materials, labour, labour cess and (T&P) required for the work etc comple and as per direction of Engineer in charge.

Providing, fixing precast RCC Seating Chair of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, complete as per approved drawings and technical specifications including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Making lawns including ploughing and breaking of clod, removal of rubbish, dressing and supplying doobs grass roots and planting at 15 cm apart, including supplying and spreading of farm yard manure at rate of 0.18 cum per 100 sqm including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Supply & fixing Aluminium Alloy Plate for Name Plate including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete including cost of materials and conveyance of all materials, royalty taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge With cement mortar 1:3 (1 cement : 3 fine sand)

Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all completeincluding cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Guniting assuming thickness 25mm concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete including cost of materials and conveyance of all materials, royalty, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Epoxy bonding of new concrete to old concrete including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Repair of RCC railing (assuming 10% damage) including chipping and removal of damaged concrete, cleaning of exposed steel reinforcement, application of bonding agent, providing and placing RCC M30 with reinforcement, finishing, curing, and all incidental works: chipping/removal of damaged concrete, cleaning steel reinforcement, bonding agent application, RCC M30 with reinforcement, finishing and curing as per technical specifications, including scaffolding, T&P, labour, and all incidental charges; all rates include cost of materials, labour, conveyance, royalty, taxes, and as directed by the Engineer-in-Charge.

Finishing with Epoxy paint (two or more coats) on Concrete Surface at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc.complete including cost of materials and conveyance of all materials, royalty, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge. (Below Water & Extra time consuming for tidal influence) (Temporary stage/platform paid saparately)

Providing weep holes in abutment, wing wall, retaining wall, toe wall and RCC drain etc with 100mm dia A.C. pipe as per approved drawing and technical specifications complete in all respect as per Section 2200 & Clause 2706 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost & conveyance of all materials, labour, labour cess, T&P, royalty etc complete and as per direction of Engineer-in-Charge. (Below Water & Extra time consuming for tidal influence)

Providing and laying of filter media/metal spall backing using 45mm size crushed hard granite stone aggregates to the required thickness with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall and return wall of CD works to the full height compacted to a firm condition as per drawing and technical specifications complete in all respect satisfying the requirements laid down in Clause 2504.2.2 and Section 900 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost & conveyance of all materials, labour, labour cess, T&P, royalty etc complete and as per direction of Engineer-in-Charge. (Below Water & Extra time consuming for tidal influence)

Rough stone dry packing in aprons and revetments with hard granite stone of size 30 cm and above as per approved drawing and technical specifications complete in all respect as per Section 900, 1000 and 2500 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost & conveyance of all materials, labour, labour cess T&P, royalty etc complete and as per direction of Engineer-in-Charge. (Below Water & Extra time consuming for tidal influence)

Supplying approved Marine ''D" hallow Rubber fender of size 150 x150 x25 mm as per specification and drawing including cost & taxes of Fender with transport charges to deliver at work site etc. complete in all respect as per the direction of the Engineer in charge.

Labour for cutting Marine ''D" hallow Rubber fender of required size and fitting &fixing the same as per specification and drawing along the jetty fender beam using stainless steel Anchore bolts, Nuts and washers of required size by drilling holes in the existing concrete surface and making good good of the damage with cement mortar(1:1) (1cement :1sand) including cost, conveyance, taxes of all materials labour, labour cess, T&P etc. required to complete the work in all respect as per drawing,design specification and direction of Engineer in charge (Excluding cost of Fender)

Supplying all materials,labour and T&P for cutting grouves in Pucca Floors & walls for taking GI/ PVC Pipes and making good the damages as per specification including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge.

Supplying all materials,labour and T&P for cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking G.I. pipes and fittings /P.V.C. pipes and fittings all complete including cost of all materials, labour & labour cess etc complete as per direction of Engineer-in-Charge.

Supplying & fixing on wall surface Following dia Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including Supplying & fixing the pipe with clamps at 1.00 m spacing & jointing of pipes & fittings with one step CPVC solvent cement including making good the wall & Floor and testing of joints complete including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge.

20mm nominal outer dia pipe

25mm dia pipe

32mm dia pipe

Providing and fixing on wall face of the following dia single socket unplasticised Rigid UPVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving10 mm gap for thermal expansion including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge.

Supplying & Laying in trenches unplasticised UPVC pipes conforming to IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge. 110mm. dia UPVC Single Socket Pipe (Soil Line) (Earth work in trenches to be measured and paid for separately)

Providing and fixing on wall face Unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge.

110mm. Dia PVC Bend

110mm Dia PVC Cowl

110mm. dia UPVC Pushfit Coupler

75mm. Dia PVC Bend

75mm Dia PVC Door Bend

75mm. dia UPVC Single Tee with Door

75mm Dia PVC Cowl

Supplying all materials, labour and T &P for fixing 110 x75mm size PVC Nahani Trap of self cleaning design with stainless stell grating or without vent arm including cutting holes in walls and making good to the damages etc. all complete as per specification including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge.

Supplying & fixing of bath/toilet/kitchen fittings of the following size & specification including cost of fittings including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge.

Short bodyBib Cock (Jaquar Model No. CON-047KN)

Pillar Cock (Jaquar Made, Model No. ARS-031165)

Angular Stop Cock

Supplying all labour and T&P for fixing Watertec UPVC Ball Valve of the following size as per specification all complete including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge.

Supplying all labour and T&P for fixing CPVC Union of the following size as per specification all complete including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge.

Supplying & fixing Single Piece Water Closet (European type W.C pan) with integral 'P' trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1: 1) etc with Supplying & fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge.

Supplying & fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge.

Fixing flexible (Coil shaped) PVC waste pipe for wash basin or sink 32 mm dia 1150 mm with PVC waste pipe etc. complete as per specification including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge.

Supplying all materials,labour and T &P for fixing Steel Towel Rail fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge.

Supplying all materials, labour and T&P for fixing of 3 - Layer White Rotational Moulded Cylinderical Vertical water storage tanks (ISI marked) etc. all complete including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Fixing 630mm x 445mm Swivel mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Fixing Wall hung wash basin 590x490x185 mm with half pedestal conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Supplying all materials,labour and T&P for fixing of soap dish holder fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification.(including cost of soap holder ) including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Supplying, installing, testing and commissioning of approved make White Viterous urinals 3.8LPM, Urinal valve Auto closing system with Built-in Control cock & wall flange supported including automatic flushing systems for all complete including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Recessed wiring to Tube light point/fan point/exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5A,250V Modular type switch (Make Cona/Anchor/ Havels ) & ceiling rose (Make Cona/Anchor/ Havels ) mounted on MS Box having front bakelite cover of suitable size with 1.0 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connections as per the direction of Engineer-in-charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard).(Excluding the cost of sypplying and fixing of 100mmx100mmx60mm MS Box with backlight cover-1no switch Box)

Supplying & fixing of Modular GI box for 2-modules, 18 SWG (Nominal size) on surface/ recess with suitable size of Modular Base & Cover in front including cutting the wall & making good the same in case of recessed conduit as required including all accessories and connections including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Supplying & fixing of Modular GI box for 8-Modules, 18 SWG (Nominal size) on surface/ recess with suitable size of Modular Base & Cover in front including cutting the wall & making good the same in case of recessed conduit as required including all accessories and connections including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Supplying & fixing of 5 pin 5/6 amp Modular Type Switch and 5/6 amp Modular Type socket outlet on the existing switch box/ cover including connections etc. including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Installation, Testing and Commissioning of Step type modular ceiling fan regulator - IS Mark, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Supplying and drawing 1x1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in existing surface/recessed PVC conduit as required i including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard).

Surface wiring to sub-main in 2x2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.6mm thick alongwith 1 x 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire etc. as required including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard).

Recessed wiring to sub-main in 2x1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.6mm thick alongwith 1 x 1.5 Sq.mm FR PVC insulated single core multistrand copper conductor as earth wire etc. as required including all accessories and connections including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge. (Make of wire Finolex/ L&T/Anchor/ Havels/ V Guard).

Supplying & fixing of 5amp to 32amp rating 240V "B" series miniature circuit breaker suitable for lighting & other loads of the Single poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Supplying & fixing of Modular Blanking Plate of ISI Marked on the existing Modular switch board including connections etc. including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Supplying & fixing of Tube light of ISI Marked on the existing Modular switch board and celing rose including connections etc. including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Supplying Fitting & Fixing, Installation, testing and Commissioning of Ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5sq.mm FR PVC insulated single core multistrand copper conductor etc. including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm 1600 cmh air delivery with louvers (Halonix heavy duty or any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection complete etc.as required and as per the direction of E.I.C.

Supply, Installation, Testing, and Commissioning of 63 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge. Make-SEIMENS/HPL/ANCHOR/L&T/HAVELS/C & S/ RK

Supplying & fixing of 2 WAY , SPN, Single Door MCB-DB with sheet steel enclosure, distribution board, on surface/ recess complete with tinned copper bus bar, neutral box bar, earth bar, din bar, detachable gland plate , inter connection , phospate & powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) including all accessories and connections including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Earthing with GI earth pipe 3m long 40mm dia ISI marked including all accessories and providing masonary enclouser with cover plate having locking arrangement and watering pipe etc. with charcoal & salt including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing from earth electrode to PANNEL BOARD including cost of all materials, labour & labour cess complete as per specification and direction of Engineer-in-Charge.

Labour for drilling a perfectly vertical bore hole of a specified dia for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc. for lowering of finished bore suitable for lowering of 200mm dia GI/PVC pipes for housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200mm to 450mm ia in over burden portion with including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

00 mtr. to 100 Mtrs.

100 mtr. to 200 Mtrs.

200 mtr. to 300 Mtrs. and above

Supply of all labour & T&P for Lowering the following size G.I/PVC Pipes with or without slotted pipes as per the necessity from ground level and fitted up in perfectly vertical position, including cutting and threading pipe and slotted pipe and fixing all jointing materials etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign from above excluding cost of fittings & jointing materials including cost of materials and conveyance of all materials, royalty, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply an use of all necessary equipment and labour including cost of materials and conveyance of all materials, royalty, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge

Supplying all labour, tools and plant and grouting with cement bentonite slurry for saline sealing in the bore around the 200mm dia PVC casing pipe etc. all complete including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge. (including the cost of Cement)

Supplying all labour, T&P and materials for Packing the bore with washed gravel (size P-6) around the pipes in good quality including cost of gravel etc. including cost of materials and conveyance of all materials, royalty, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge.(Upto 15m )

Supplying all materials labour and T&P and grouting with cement slurry for Sanitary Sealing around the GI/PVC casing pipe up to 3 mtrs. Below ground level including cost of cement all complete including cost of materials and conveyance of all materials, taxes, labour, labour cess, T&P, and all incidental charges required for proper completion of the work, complete as directed by the Engineer-in-Charge.

Supplying all labour, labour cess, T&P, materials for tigging & fixing of following with all complete. (Material to be supplied by the Contractor)

200mm Sch-80 Pipe

150mm schh 80 Pipe

8 x 6 Reduce Socket

Filter Fitting (100 ft)

200mm PVC Cone

75mm Sch-80 Pipe

Providing supplying fitting and fixing of 1-2 HP(Crompton) 3 Phase oilfiltered 100mm dia borewell High Speed submergable pump set of KSB/ kirlosker/ crompton/texmo and other IS make with control pannel including cost of pump with 2.5sqmm three core PVC coated copper flat cable, 32mm dia HDPE pipe / nipple / bolt and PVC coated 6mm wire rope , U bolt , M.S clamp with all labour, T&P, taxes as applicable at site as per specification and direction of engineer in charge.

Please Enable Macros to View BoQ information