Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.3 LAccepted-AOC FLAT NO 203 SEC 14 PLOT NO 142 SHIVSRUTI PARK APARTMENT E WING 1ST FLOOR MOSHI PRADHIKARAN TAL HAVELI DIST PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | L1 | Accepted-AOC ACCEPTED BEING LOWEST BIDDER | |
| 2 | L2₹31.2 L+₹1.6 L (5.44%)Rejected-Finance GATE NO 454 01 TAPKIR NAGAR PUNE NASIK HIGHWAY NEAR GANDHARV NAGARI MOSHI PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | L2 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 3 | L3₹31.8 L+₹2.1 L (7.23%)Rejected-Finance 02 PADRI SHIV NAGAR SHIV NAGAR MAHARAJGANJ UTTAR PRADESH 273303 | MAHARAJGANJ | UTTAR PRADESH | 273303 | L3 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 4 | L4₹32.5 L+₹2.9 L (9.81%)Rejected-Finance | L4 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 5 | L5₹39.0 L+₹9.3 L (31.5%)Rejected-Finance | L5 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
20 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KHADKI
Headquarters CWE Khadki, Military Engineer Services, Range Hills Road, Khadki, Pune-411003
REPAIR/ MAINT OF WATER SUPPLY DISTRIBUTION SYSTEM AND ALLIED WORKS AT DEPOT BN., RECORD OFFICE, CIW, HRDC AND OTM AREA AT BEG AND CENTRE UNDER AGE E/M-I IN GE(CENTRAL) KHADKI
2024_MES_643291_1
CWE/KKE/TOKEN-77 OF 2023-24
Open Tender
Civil Works - Water Works
Item Rate
180 days
KHADKI
AS PER TENDER
6 documents required · 6 mandatory
₹500
Yes
GE CENTRAL KHADKI
₹90,000
Yes
3 Apr 2024
21 Feb 2024
28 Mar 2024
21 Feb 2024
20 Mar 2024
7 Mar 2024
22 Feb 2024 - 28 Feb 2024
Amount
M & L for excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for lying of pipes etc and getting out in soft / loose soil complete all as specified and directed by Engr-in-charge.
M & L for excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for lying of pipes etc and getting out in road cuttings/Hard dense soil complete all as specified and directed by Engr-in-charge.
Removing surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.
Returning filling in trenches including spreading, leveling, watering and well ramming in layers n . Exc 25 cm complete all as specified and directed by Engr-in-charge.
Taking up CI/DI water mains (incl all fitting) 80mm bore dia of pipe with spigot and socket ends from trenches complete all as specified and directed by Engr-in-charge.
All as per item No 5 , but 100mm bore dia
All as per item No 5 , but 150mm bore dia
All as per item No 5 , but 200mm bore dia
All as per item No 5 , but 250mm bore dia
All as per item No 5 , but 300mm bore dia
M&L for cutting CI/DI/GI pipes in position for insertion of fittings, mechanical joints etc for bore of pipe 80mm complete all as specified and directed by Engr-in-charge.
All as per item No 11 , but 100mm bore dia
All as per item No 11 , but 150mm bore dia
All as per item No 11 , but 200mm bore dia
All as per item No 11 , but 250mm bore dia
All as per item no 11 , but 300mm bore dia Note for item No 11 to 16 :- Fittings shall be measured and paid seperately.
Supply, laying, jointing & testing DI-K7 class with spigot and socket for 100 mm bore dia pipe , suitable for Push on rubber joint, with internal cement mortor lining, and external zinc and black bitumen coated pipes in any lengths conforming to IS:8329-2000 including Rubber Gasket & joints as per IS:9523-2000 laid in trenches/ Road/ Ducts/ Footpath/ on wall/ on floor locations complete all as specified and directed by Engr-in-charge.
All as per item No. 17 above but 150 mm bore dia complete all as specified by Engr-in-charge.
All as per item No. 17above but 200 mm bore dia complete all as specified by Engr-in-charge.
All as per item No. 17 above but 250 mm bore dia complete all as specified by Engr-in-charge.
All as per item No. 17 above but 300 mm bore dia complete all as specified by Engr-in-charge.
Relaying only 80 mm bore CI pipes with spigot and socket ends laid in trenches including thorough cleaning of old CI pipe by descaling internally with steel brushes equal to bore of pipe, scraping washing properly complete all as specified and directed by Engr-in-charge. (to be measured only found serviceable in all respect retrived from item No 5).
All as per item No. 22 above but 100 mm complete all as specified by Engr-in-charge. (to be measured only found serviceable in all respect retrived from item No 6).
All as per item No. 22 above but 150 mm complete all as specified by Engr-in-charge. (to be measured only found serviceable in all respect retrived from item No7).
All as per item No. 22 above but 200 mm complete all as specified by Engr-in-charge. (to be measured only found serviceable in all respect retrived from item No 8).
All as per item No. 22 above but 250 mm complete all as specified by Engr-in-charge. (to be measured only found serviceable in all respect retrived from item No 9).
All as per item No. 22 above but 300 mm complete all as specified by Engr-in-charge. (to be measured only found serviceable in all respect retrived from item No 10).
M & L for Ductile iron fittings such as bends (any type, radius and angle), tapers any type (straight, bend, incresing, decreasing or double socket etc.), Tee piece, single branch 'Y'junction double branch, collar etc., caps and plugs etc. as per IS: 9523-2000 of class K-7, with internal cement mortor lining, and external zinc and black bitumen coated of dia upto 150 mm complete all as specified and directed by Engr-in-charge.
All as per item No. 28 above but dia 200 mm to 300 mm complete all as specified by Engr-in-charge.
M&L for fabrication pipe junction Y/T/cross or other shape with MS structural pipe with flanged end, dia-200 mm, Mimimum thickness-5 mm, length as per site requirement all as specified and directed by Engr-in-charge.
Taking up worn out GI steel tubing incl all fitings from trenches of 15 mm bore complete all as specified and directed by Engr-in-charge.
All as per item No 31, but size 20 mm bore complete all as specified and directed by Engr-in-charge.
All as per item No 31, but size 25 mm bore complete all as specified and directed by Engr-in-charge.
All as per item No 31, but size 40 to 50 mm bore complete all as specified and directed by Engr-in-charge.
All as per item No 31, but size 80 mm bore complete all as specified and directed by Engr-in-charge.
All as per item No 31, but size 100 mm bore complete all as specified and directed by Engr-in-charge.
All as per item no 31, but size 150 mm bore complete all as specified and directed by Engr-in-charge.
S & F and Laying in trenches/fixed to wall (upto 15mtr height) galvanised steel water tubing 15 mm bore, medium grade with and including all medium grade fittings complete all as specified by Engr-in-charge.
All as per item No. 38 above but of size 20 mm bore complete all as specified by Engr-in-charge.
All as per item No. 38 above but of size 25 mm bore complete all as specified by Engr-in-charge.
All as per item No. 38 above but of size 40 mm bore complete all as specified by Engr-in-charge.
All as per item No. 38 above but of size 50 mm bore complete all as specified by Engr-in-charge.
All as per item No. 38 above but of size 80 mm bore complete all as specified by Engr-in-charge.
All as per item No. 38 above but of size 100 mm bore complete all as specified by Engr-in-charge.
All as per item No. 38 above but of size 150 mm bore complete all as specified by Engr-in-charge. Note: Unsv HDPE pipe of size 150 to 200mm will be given as a schedule of credit in place of GI pipe.
Relaying only GI pipes of size 25 mm bore in trenches including thorough cleaning and descaling internally complete all as specified and directed by Engr-in-charge. (to be measured only found serviceable in all respect retrived from item No- 33).
All as per item No. 46 above but GI pipe of size 40 mm bore complete all as specified by Engr-in-charge. (to be measured only found serviceable in all respect retrived from item No- 34).
All as per item No. 46 above but GI pipe of size 50 mm bore complete all as specified by Engr-in-charge. (to be measured only found serviceable in all respect retrived from item No- 34).
All as per item No. 46 above but GI pipe of size 80 mm bore complete all as specified by Engr-in-charge. (to be measured only found serviceable in all respect retrived from item No- 35).
All as per item No. 46 above but GI pipe of size100 mm bore complete all as specified by Engr-in-charge. (to be measured only found serviceable in all respect retrived from item No- 36).
All as per item No. 46 above but GI pipe of size 150 mm bore complete all as specified by Engr-in-charge. (to be measured only found serviceable in all respect retrived from item No- 37).
S & F and Laying in trenches/fixed to wall HDPE pipe 15 mm bore and including all fittings complete including taking down old/unsv pipes all as specified by Engr-in-charge.
All as per item No. 52 above but of size 20 mm bore complete all as specified by Engr-in-charge.
All as per item No. 52 above but of size 25 mm bore complete all as specified by Engr-in-charge.
All as per item No. 52 above but of size 40 mm bore complete all as specified by Engr-in-charge.
All as per item No. 52 above but of size 50 mm bore complete all as specified by Engr-in-charge.
M&L for taking appart and reassembling stuffing box of sluice valve S.S. Spindle in position for any type and size of sluice valve and replacement of gland packing. Note: (i) Nuts, bolts & washers whenever require new shall be measured and paid separately as supply only.
S&F in repairs CI body non raising spindle sluice valve with cast iron wheel, of size 80 mm bore, class PN-1.6 with SS spindle with brass nut, both ends flanged confirming to IS-14846 with standard bolts hole, fixing with nuts, bolts, washers, rubber gasket etc complete in position of pipe line all as specified and directed by Engr-in-charge.. Note: (i) Nuts, bolts & washers whenever require new shall be measured and paid separately as supply only. (ii) Rubber gusket shall be inclusive of the quoted rate of this item.
All as per item No.58 above but size 100 mm bore complete all as specified by Engr-in-charge.
All as per item No.58 above but size 150 mm bore complete all as specified by Engr-in-charge.
All as per item No.58 above but size 200 mm bore complete all as specified by Engr-in-charge.
All as per item No.58 above but size 250 mm bore complete all as specified by Engr-in-charge.
All as per item No.58 above but size 300 mm bore complete all as specified by Engr-in-charge.
S&F in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipes 15mm bore complete all as specified and directed by Engr-in-charge.
All as per item No. 64 above but of size 20 mm bore complete all as specified by Engr-in-charge.
All as per item No. 64 above but of size 25 mm bore complete all as specified by Engr-in-charge.
All as per item No. 64 above but of size 40 mm bore complete all as specified by Engr-in-charge.
All as per item No. 64 above but of size 50 mm bore complete all as specified by Engr-in-charge.
S & F in repairs cast Iron swing check non return valve confirming to IS : 5312 (Part I) of 1969, both end flanged with rubber gasket & Nuts, bolts & washersof sizes 80 mm bore. (Note:- Nuts, bolts & washers wherever required new shall be measured in appropriate item as supply only )
All as per item No. 69 above but of size 100 mm bore complete all as specified by Engr-in-charge.
Supply & fixing in repairs cast Iron foot valve confirming to IS : 4038 flanged end with rubber gasket, Nuts, bolts & washers of sizes 80 mm bore. (Note:- Nuts, bolts & washers wherever required new shall be measured in appropriate item as supply only )
All as per item No. 71 above but of size 100 mm bore complete all as specified by Engr-in-charge.
All as per item No. 71 above but of size 300 mm bore complete all as specified by Engr-in-charge.
S&F MS mechanical joint with rubber washer, mild steel screw bolts (machine made) with screwed both ends of dia as per flange hole and required length each screwed end to be fitted with washers and one hexagonal nut suitable for bore of pipe 50 mm complete all as specified by Engr-in-charge.
All as per item No. 75 above but suitable for bore of pipe 80 mm complete all as specified by Engr-in-charge.
All as per item No. 75 above but suitable for bore of pipe 100 mm complete all as specified by Engr-in-charge.
All as per item No. 75 above but suitable for bore of pipe 150 mm complete all as specified by Engr-in-charge.
All as per item No. 75 above but suitable for bore of pipe 200 mm complete all as specified by Engr-in-charge.
All as per item No. 75 above but suitable for bore of pipe 250 mm complete all as specified by Engr-in-charge.
All as per item No. 75 above but suitable for bore of pipe 300 mm complete all as specified by Engr-in-charge.
Supply only Mild steel screw bolts (machine made) with hexagonal heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal nut, n exc 10 cm long , 10 to 20 mm dia of neck.
M&L for mild steel framed work with ends of bars souldered, welded or reveted or forced into spikes, framed guard bars, ladders, framed balusters, walk ways, railings, gates, frame work of water tank, valvepit and similar work confirming to Fe.290.Gde-E-165 incl painting with one coat of red oxide primer and one coats of anticorrosive black bituminous paint incl dismantling mild steel work of any description not otherwise specially provided for all as specified and directed by Engr-in-charge..
M&L for cement plaster 10mm thick in CM1:4 on fair faces of brick work or concrete surfaces finished even and fair incl taking down plaster any description, racking out joints, hacking for key, scrubbing down with water complete all as specified by Engr-in-charge.
M&L for PCC 1:3:6 type-C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete incl necessary form work wherever required and incl demolition of Cement Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, all as specified and directed at site by Engr-in-charge.
Supply only pure PTFE Gland Packing Rope suitable for valves/Pumps
M& L for cleaning of Sewage pump house inside area and sump not more than size of 15 ft depth and 12 ft dia including collection of mud from sump by 10000 GPH honey sucker vehicle and deposit as per PMC direction.
S & F PVC flexible green pipe for dewatering of size 50 mm dia with clamp including all acessories and all as per specified and directed by Engr-in-charge.
S & F PVC flexible green pipe for dewatering of size 80 mm with clamp dia including all acessories and all as per specified and directed by Engr-in-charge.
Taking out existing damaged brush from suction sweeping equipment and supply and fixing of new nylon brush (soft quality) with as standard base as per manufacturer's size 1.5 feet long & 2.5 Inch wide suitable for fix with suction sweeper complete all as specified and as directed by Engr-in-Charge.(Make : Mody or as per existing make)
S & F of new nylon brush (soft quality) with wooden base of size 900X65X20mm. As per manufacturing suitable for fix with telescopic handle complete all as specified and as directed by Engr-in-charge.
S & F Rubber gasket /packing 4mm thick suitable for valve/pump/suction sweeper complete all as specified and as directed by Engr-in-charge.
Supply, fabricate and fix algae/dry leaves removing net having frame size 30cm x 30cm, made of stainless steel pipe 19mm dia, duly fixed with nylon net as per the existing and suitable for fixing with existing teliscopic handle complete all as specified and as directed by Engr-in-charge.
S & F nylon rope of size 20 mm dia multi stranded super flexible type and all as per specified and directed by Engr-in-charge.
M&L for spray painting of MS filter plant cylinderical type horizontal position complete including connected CI pipes, valves etc at site including removing of old painted, all rust, dirt, fungies, complete from filter plant one coat of aluminium paint as priming and one finishing coat (Total Two coat of aluminium paint) to all external surfaces from top to bottom complete with all bracings, supports of filter plants all as specified and directed complete by Engr-in-charge.. Note: Safety measurements and necessary T&P will be provided by contractor itself and rate will be included in quoted rate.
Supply, installing, testing and commissioning of ISO certified factory made LT pump starter panel board indoor type fabricated out of 3.0 mm thick CRCA sheet for outer body and 2.0 mm thick CRCA sheet for inner partition walls, independant cabinet for cabinet doors for MCCBs, Starter, Bus bar, cable trays, metering equipment vertical type floor mounted, minimum IP-54 protection suitabily grounted to PCC complete with internal wiring, epoxy powder coated and connection of cable ends with suitable size of aluminium cable lugs and angle iron structure of angle size 50x50x5mm duly spray painted with 2 coats of synthetic enamel paint as approved colour over a coat of red oxide paint comprising the following :-
Aluminium busbar 3 phase 4 wire system suitable for 200 Amp capacity mounted on insulator.
Incoming MCCB TP of 100 Amps 25 KA, 415 volt - 01 No
Outgoing MCCB 63 Amp TP - 01 No.
Indicating lamp LED type RYB - 03 Nos
Change over switch of capacity 100 Amp.- 01 Nos
Sheet metal enclouser star delta starter suitable for motor upto 7.5 HP,over load relay range 9 to 14 Amp 415 volts, single phase preventor etc complete -02 Nos
Supply of Copper sulphate suitable for swimming pools complete all as specified and as directed by Engr-in-charge.
Supply of alum crystal free from, impurity class I suitable for swimming pools complete all as specified and as directed by Engr-in-charge.
Supply "O" Todoline solution for water testing purpose in 500 ml bottle make Nice/Glaxo or as per existing make.
Taking out existing unserviceable Electrically driven Induction motor of capacity upto 5 HP (as per existing Make) from foundation, split opening into the parts at work shop and repair the motor by rewinding of motor with supper enamelled copper winding wire of suitable gauge / size as exists by replacing paper insulation of class F and fire proof sleeves and varnishing by cleaning of stator slots, assembling complete motor, oiling, greasing and painting with one coat of synthetic enamelled paint after cleaning and preparing surface for painting, re-installing and testing including replacement of bearings and couple with the existing pump at site on full load complete all as directed by Engr-in-Charge.
All as per sl item No 100 here-in-above but capacity of motor 7.5 to 10 HP,
All as per sl item No 100 here-in-above but capacity of motor 30 HP.
S & F terminal box of motor as per existing make.
Taking out existing unserviceable Electrically driven submersible motor of capacity upto 5 HP (as per existing Make) from UG sump/pond by using chain & pully, opening into the parts at work shop and repair the motor by rewinding with supper enamelled copper winding wire of suitable gauge / size as exists by replacing paper insulation of class F and fire proof sleeves and varnishing by cleaning of stator slots, assembling complete motor, sealing, oiling, greasing and painting with one coat of synthetic enamelled paint after cleaning and preparing surface for painting, re-installing and testing including replacement of bearings and couple with the existing pump at site on full load complete all as directed by Engr-in-Charge
All as per item no 104 above, but capacity 10HP to 15HP.
Repair /servicing of 30 HP Centrifugal pumping set by replacing all worn out parts such as bearings, housing, mechanical seal, shaft, shaft key, 'O' ring, Shaft welding turning both side and threading both side (any type of lathe work), copper bush, glande both sides, paking paper etc , Varnishing of motor, Greasing of Motor bearings for making smooth functioning of pumping sets re-installed at site and tesing all as directed by Eingr-in-Charge. Note: spare parts will be wil be included in quoted rates.
All as per item no 106 above, but capacity 10 HP to 12.5 HP
All as per item no 106 above, but capacity 03 HP to 7.5 HP
Repair & servicing of existing pump star delta starter panels of any size and capacity by replacing unserviceable components such as contactor, relays, etc and tightening of all connecting points, cable connections including replacement of wires, push button and indicator lamp complete all as directed by Engr-in-charge. (Note :- (i) Parts such contactor, relay and timer required for replacement shall be measured and paid seperately under appropriate items given here in after.) (ii) Replacement of wires, push button and indication lamp are inclusive in quoted rate
S & F in repair 3 pole power contactor AC, 415 Volt, with required NO + NC & Coil voltage 380V to 415V, suitable for upto 30HP water pump.
S & F in repair 3 pole power contactor AC, 415 Volt, with required NO + NC & Coil voltage 380V to 415V, suitable for upto 15 HP water pump.
S & F in repair Thermal over load relay for 3 Phase AC Motor starter, suitable for 30HP water pump, relay setting range 20.0 to 40.0 Amps
S & F in repair Thermal over load relay for 3 Phase AC Motor starter, suitable upto 15 HP water pump, relay setting range 12.0 to 30.0 Amps
S & F in repair Electronic Timer, 3 - 30 Sec 415V
S & F in repair single phase preventor,
Taking/lifting out existing unserviceable submersible pump capacity upto 5 HP Electrically driven (as per existing Make) by from sump/pond using chain & pully with tripod arrangment, carrying to workshop, opening into the parts at work shop and repair pump by replacing housing, impeller, impeller key, washer impeller nut, deflector, shaft seal, rotar turning and grinding, segment and thrust, guide bushes,distance sleeve, neck ring , top dual bushes , coupling with sand guard etc including replacement of bearings and couple with the existing motor and lowering in same position complete pumpset at site on full load testing complete all as directed by Engr-in-Charge . Note spare parts of pump are inclusive in the quoted rate.
All as per item no 116 above, but capacity 10HP to 15HP.
S &F 6 sqmm 3 core flat/round flexible copper cable with flexible conduit .
S & F 10 Sqmm 3 core flat/round submersible copper cable with flexible conduit . Make Polycab or equivallent
S&F in repair of electric water level indicator including buzzer 5 level complete with sensor including sensor cable upto 50 mtr distance, wiring in PVC conduit/casing and capping etc for OH tanks and UG/Semi UG water reservoir all accessories and dismentling taking down unsv one all as specified and directed by Engr-in-charge.
M&L for cleaning of RCC OH reservior 140000 gallon capacity removing all deposite materials like sand, mud, etc, washing of side walls, scraping with iron brush to remove all type of scales, filling up cavaties by cement motar 1:1, washing of inner dome walls with bleaching powder before painting with lime, 2 coats complete and write the date of cleaning with suitable letter size with black paint all as speciied and directed by Engr-in-Charge (Note: Total OHT-01 Nos, Each OHT for one cleaning will be considered as one job )
M&L for cleaning of RCC OH reservior 50000 gallon capacity removing all deposite materials like sand, mud, etc, washing of side walls, scraping with iron brush to remove all type of scales, filling up cavaties by cement motar 1:1, washing of inner dome walls with bleaching powder before painting with lime, 2 coats complete and write the date of cleaning with suitable letter size with black paint all as speciied and directed by Engr-in-Charge (Note: Total OHT-02 Nos, Each OHT for one cleaning will be considered as one job )
M&L for cleaning of RCC OH reservior 20000 gallon capacity removing all deposite materials like sand, mud, etc, washing of side walls, scraping with iron brush to remove all type of scales, filling up cavaties by cement motar 1:1, washing of inner dome walls with bleaching powder before painting with lime, 2 coats complete and write the date of cleaning with suitable letter size with black paint all as speciied and directed by Engr-in-Charge. (Note: Total OHT-01 Nos, Each OHT for one cleaning will be considered as one job )
M&L for cleaning of Pressed steel water OH reservior 10000 gallon cap internally by brushing walls, floors and through washing and removing all dirt, muds etc through drain out pipe complete and write the date of cleaning with suitable letter size with black paint all as per specified and direction of Engr -in-charge. (Note: Total-02 Nos and Each Tank for one cleaning will be considered as one job )
M&L for cleaning of Pressed steel water reservior 10000 gallon cap internally by brushing walls, floors and through washing and removing all dirt, muds etc through drain out pipe complete and write the date of cleaning with suitable letter size with black paint all as per specified and direction of Engr -in-charge. (Note: Total-02 Nos and Each Tank for one cleaning will be considered as one job )
M&L for cleaning of RCC semi UG clear water sump 50,000 gallon capacity removing all deposite materials like sand, mud, etc by pumping out or by manuually complete, washing of side walls, scraping with iron brush to remove all type of scales, filling up cavaties by cement motar 1:1, washing of inner dome walls with bleaching powder before painting with lime, 2 coats complete and write the date of cleaning with suitable letter size with black paint all as speciied and directed by Engr-in-Charge
M&L for cleaning of RCC semi UG clear water sump 25,000 gallon gallon capacity removing all deposite materials like sand, mud, etc by pumping out or by manuually complete, washing of side walls, scraping with iron brush to remove all type of scales, filling up cavaties by cement motar 1:1, washing of inner dome walls with bleaching powder before painting with lime, 2 coats complete and write the date of cleaning with suitable letter size with black paint all as speciied and directed by Engr-in-Charge
M&L for cleaning of MES water supply installations / campus of BEG shylet mess PH approx area 2500 sqm by surface dressing or trimming of natural ground to remove small unequalities n.exc 15 cm deep ( including removing vegetation / shrubs / brush wood / under-growth ), cleaning of drains & carrying away the rubbish to a distance of n.exc 50 mtr away complete all as per specified and direction of Engr -in-charge for the following installations:
All as per Si item No 128 above but TB-I old PH approx area 1500 sqm
All as per Si item No 128 above but BEG Dhobhi ghat PH approx area 1500 Sqm
All as per Si item No 128 above but BEG PH Depot Bn OHT area approx area 2000 Sqm
All as per Si item No 128 above but TB-I MAP PH approx area 1500 sqm
All as per Si item No 128 above but Sewage pump house approx area 200 Sqm
M & L for taking out and relaying any type of HDPE pipe from trenches size of 150 mm to 200 mm diameter along with new fittings and accessories require for joining in existing or new locations including cleaning complete all as directed by the Engr -In-Charge.
S & F and laying of CPVC pipe SDR 11 of size 20 mm outer diameter incluing all fittings and accessories and taking out unserviceable pipe complete all as directed by the Engr -In-Charge
Repair/replacement of GI/HDPE fitting such as 'T', bend, elbow, reducer, socket, union and barral piece of size 15 mm to 25 mm dia as per site requirement one of each complete all as specified and directed S & F. Note (i) Such item GI/HDPE 'T', bend, elbow, reducer, socket, union and barral piece etc shall be inclusive of the quoted rate of this item.(ii) The quoted rate is deemed to be included any one of the GI/HDPE fitting as stated above.
All as per item No. 136 above but of size 40 to 50 mm bore complete all as specified by Engr-in-charge.
All as per item No. 136 above but of size 80 to 100 mm bore complete all as specified by Engr-in-charge.
M&L for painting of pressed steel water tank 10000 glns cap complete to all internal and external surfaces comprising of four Nos side wall, floor, roof and all internal bracings, supports of steel water tank with one coat of aluminium paint as priming (drinking water quality) and one finishing coat (Total Two coat of aluminium paint) complete all as specified and directed by Engr-in-charge.
M&L for painting of pressed steel water tank 10000 glns cap including removing of old painted,all rust, dirt, fungies, complete from structure of 18 mtr steel staging pressed steel water tank 10000 glns cap one coat of aluminium paint as priming (drinking water quality) and one finishing coat (Total Two coat of aluminium paint) to all internal and external surfaces comprising of four Nos side wall, floor, roof and all internal bracings, supports of steel water tank complete all as specified and directed by Engr-in-charge. Note: Safety measurements and necessary T&P will be provided by contractor itself and rate will be included in quoted rate.
S&F in replacement of Heavy Duty DOL Starter Type DX-P with robust 4 Pole Contactor & LR1D OLR in S.S. enclosure (Motor rating AC-3 Duty , 415 Volt, 50Hz, 3Ph) of size suitable upto 7.5 HP 415 volts , Relay range 09 -14 Amps complete all as specified and directed by Engr-in-charge. Make :- C&S, cat part No BE1-DXP204-316 X or equivalent to L&T/BCH
S&F in replacement of Heavy Duty Automatic Star Delta Starter Type DX-P with robust 4 Pole Contactor & LR1D OLR, Electronic Star Delta Timer in S.S. enclosure (Motor rating AC-3 Duty , 415 Volt, 50Hz, 3Ph) of size 30 HP 415 volts , Relay range 23-32 Amps complete all as specified and directed by Engr-in-charge. Make :- C&S, cat part No BE3-DXP204-314 or equivalent to L&T/BCH
S&F in replacement of Heavy Duty Automatic Star Delta Starter Type DX-P with robust 4 Pole Contactor & LR1D OLR, Electronic Star Delta Timer in S.S. enclosure (Motor rating AC-3 Duty , 415 Volt, 50Hz, 3Ph) of size 12 HP 415 volts , Relay range 07-10 Amps complete all as specified and directed by Engr-in-charge. Make :- C&S, cat part No BE3-DXP204-314 or equivalent to L&T/BCH
Supply and laying in replacement of old/unsv HDPE pipe in trenches/fixed to wall/on surface HDPE pipe PN-6 ,DN-90, SDR-13.6, IS 4984 CM/L-7600128415 of size 90 mm bore and including all fittings, connectors, clamps, flange joints etc to connect existing Submersible Motor including taking out complete all as specified and directed by Engr-in-Charge.
S&F and laying of HDPE pipes in trenches of size 200 mm dia HDPE pipe PN-6 ,DN-200, SDR-17, IS :498412016 CM/L-8580589 along with new fittings and accessories require for joining in existing or new locations including all necessary Tools and plants items required for heating/bonding etc complete including taking out from trenche all as directed by the Engr -In-Charge.
S & F in repairs cast Iron Air release valve 2" confirming to IS : 5312 (Part I) of 1969, both end flanged with (Note:- Nuts, bolts & washers wherever required new shall be measured in appropriate item as supply only )
M & L for spray painting of motor & pump including base plate, connecting sluice valve , incoming and outgoing pipes with two coats of Anti corrosive paint over a coat of red oxide primer for capacity 10HP to 30 HP complete all as specified and directed by Engr-in-charge.
M & L for spray painting of motor & pump including base plate, connecting sluice valve , incoming and outgoing pipes with two coats of Anti corrosive paint over a coat of red oxide primer for capacity 3HP to 7.5 HP complete all as specified and directed by Engr-in-charge.
S&F in replacement of Heavy Duty FRP tank capacity 150 ltr for chemical dosing system including all fittings as per site requirement. Make Satya Sai Aqua Pura Services or equivalent.
S&F in replacement of control panel for Dosing Pump suitable for Model SSAPS/CDSPT/25 made of powder coated MS fabrication box consisting of LED indicator, digital volt meter, Amp meter, single phase preventor, hogh voltage low voltage protection plus Buzzer will on when single phase or high/low voltage complete all as specified and directed by Engr-in-Charge. Make Satya Sai Aqua Pura Services or equivalent.
Supply only Chloroscope Kit complete box for water chlorine testing all as specified and directed by Engr-in-charge. Make: Make Satya Sai Aqua Pura Services or equivalent.
Supply, filling (at contractor source) and distribution of water supply through Water Bowser of capacity 12000 Ltr having pumping arrangment with pipe miniumn 15 mtr supply to the PVC tank directly through pipe on the roof upto height of 10 mtr complete including necessary arrangement.(Note: Demand of water bowser will be given to contractor at any time between 0800 to 2200 Hrs and has to be supplied within 03 hrs after notification, failing to which Rs 300/- per hours per demand will be recoverd. Amount of Pumping arrangement, petrol and pipe etc are included in the quoted rate. No extra payment will be given.)
S & F in replacement of 1000 liters capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top ) double layers 'ISI' marked, hoisted & fixed in position including 20 mm ball brass valve with polythene float with existing inlet, outlets and provision of washouts, vent pipe, nipples of suitable size complete all as specified and directed by Engr-in-charge.
M & L for Construction of masonary valve pit chamber of internal size 1500mm x1000mmx800mm( Internal Size) with 100 mm thick PCC 1:4:8, type D-2 as in foundation over 150 mm thick hard core, 20cm thick solid block masonry with solid blocks of grade C-5 built in cement mortar 1:4, plaster 15mm thick in cement and sand mortar 1:4 to internal surfaces and external surfaces up to 15cm below ground level and top of floor , finished even and smooth without using extra cement , 3.15mm thick MS sheet cover including 50mmX50mmX6mm thick MS angle frame fixed in PCC 1:2:4, type B1 coping with 4 Nos 25X6mm FI 150mm long hold fasts, handle, hinges with locking arrangements, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil, demolition of valve pit including disposal of surplus soil to a distance not exceeding 50m complete all as specified and directed by Engr-in-charge.
M & L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 mtr long buried directly and vertically in ground with top edge not less than 1.25 mtr below ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified location), connected with galvanised steel earthing strip of 32x6 mm all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2 with pit cover, funnel, wiremesh, 32 mm dia light grade GI tubing for protection of GI strip 32x6 mm, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.
ONKAR ELECTRIC AND GENERAL STORE
JP ENTERPRISES
Suchit constructions
Om Construction
Star Electrical
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .