Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 LAccepted-AOC JAMALPUR PURBA BARDHAMAN PIN 713408 | JAMALPUR | PURBA BARDHAMAN | WEST BENGAL | 713408 | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹3.7 L+₹3,575.40 (0.98%)Rejected-Finance 171 KATWA ROAD P O DIST BURDWAN | BURDWAN | BURDWAN | WEST BENGAL | L2 | Rejected-Finance NOT L1 BIDDER | |
| 3 | L3₹3.7 L+₹5,959 (1.63%)Rejected-Finance BARANIJPUR SAKTIPARA BURDWAN | L3 | Rejected-Finance NOT L1 BIDDER |
Tender Value
Refer Docs
EMD Value
₹7,359
Closing Date
1 Oct 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DRILLING-IN-CHARGE BMSD(D)
DIC,BMSD(D),2ND FLOOR,PURTA BHAVAN
Supply--Installation-of-Voltage-Stabilizer-and-Internal-House-Wiring-for-Tube-well-No-1-at-Baharan-Birhimpur--Water-Supply-Scheme--BLOCK--Ketugram-II--under-CMD-PHE-Dte-Dist--Purba-Bardhaman
2024_PHED_754084_5
WBPHED/DIC/BMSDD/eNIT-6/24-25
Open Tender
Electrical Work/ Equipment
Item Rate
21 days
DIC, BMSD(D), 2ND FLOOR, PURTA BHAVAN
Supply--Installation-of-Voltage-Stabilizer-and-Internal-House-Wiring-for-Tube-well-No-1-at-Baharan-Birhimpur--Water-Supply-Scheme--BLOCK--Ketugram-II--under-CMD-PHE-Dte-Dist--Purba-Bardhaman
4 documents required · 4 mandatory
₹7,359
Yes
DIC,BMSD(D),2ND FLOOR,PURTA BHAVAN, PURBA BARDHAMA
26 Dec 2024
24 Sept 2024
3 Oct 2024
25 Sept 2024
1 Oct 2024
26 Sept 2024
26 Sept 2024
Amount
PART-A: Supply and installation of Voltage correction device
Supply and delivery at site A.C. 3 phase, Oil cooled type Voltage Stabilizer suitable for unbalanced input voltage (Make: AE/ Sen & Pandit / Opto Elec./ ECS/ Fiji/other Approved Make) a) Input: 250-500 V 3ph. 50HZ, 4 wire b) Output, 415V + 1% 3ph.,50HZ. c) Capacity: 25 KVA. d) Auto manual switch IS - 9815 (I). e) Raise/lower push Button. f) Single lamps to indicate and limits of input. g) Voltmeter for input and output Voltage. (Manufacturing test certificate should be produced at the time of delivery) h) With U/V.O./V.O./L protection with contractor at output side, input MCB & Ammeter etc. ( TC /GC Needed )
Supply and delivery at site the following items: (Approve make of P.H.E Dte.)
Change over switch 100 Amps 415V, 50 Hz, 4pole onload. Make: Havells/ standard/Approve make of P.H.E. Dte.)
100 Amp. Re-wireable type TPN main switch (CONFORMS: IS/IEC600947-1&3). (Make: Approve make of P.H.E. Dte.)
100 Amp. 4 way Copper busbar chamber box by 16 SWG sheet steel enclosure including porcelain chair etc.. (Make: Approve make of P.H.E. Dte.)
25 sq.mm 3.5 core 1.1KV PVC/XLPE insulated aluminium armored cable. (Make: Approve make of P.H.E. Dte.)
Making brick built foundation with supplying of all required materials suitable for the above Voltage stabilizer by (4:1) cement mortar including holding down foundation bolts (if req.) & plaster with neat cement finish as direction of E.I.C.
Installation of the above stabilizer of item no. 1 & 2 on the foundation including all connection complete,drawing the cable properly on GI cable tray on wall /as per direction of EIC along with supplying all necessary item including testing complete.
Making joints of the cable by supplying compression type gland thimple,socket etc.as per requirement and as per direction of EIC.
Distribution wiring in 1.1KV. Grade, (2X1.5mm2) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) in suitable size PVC casing capping (Precision make) with (1.5 Sqmm) single core stranded 'FR' PVC insulted & unsheathed copper wire for ECC, including necessary PVC clips, fittings etc. to light/fan point with piano key type switch (anchor make) fixed on pvc/sheet steel fabricated switch board with Perspex/bakelite top cover on wall including necessary connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface]
a) average run 4. 5 mtr. -
Supply and delivery of following materials-
16A DP MCB with enclosure (Make- Havells/ Siemens/ ABB/ L&T)
4' long 20 watt LED tube light set white colour (Make -Philips/ Havells)
9 watt LED lamp (Make- Philips/ Havells)
Supply and fitting fixing of 45 watt. LED light fixture set [Make: Philips (Type- BRP)/ Havells/ PHED approved make] with 40 mm dia x 2.5 mtr. long G.I pipe bracket fixed on the roof of the pump house with M.S clamp properly grouting including making power connection with supply & drawing 2.5 sq. mm FR grade flexible copper wire through PVC casing/conduit with drawing earth conductor (1.0 sq mm copper flexible wire), S&F of 15 amp switch with pvc board including electrical connection & testing complete as per direction of EIC.
Making earthing arrangement
Earthing with 50 mm dia Gl pipe 3.64 mm thick x 3.04 Mts.long and 1 x4 SWG Gl (Hot Dip) wire (4 Mts. long), 13 mm dia x80 mm long Gl bolts, double nuts, double washers incl. S & F 15mm dla Gl pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above groundlevel driven to an average depth of 3.65 Mts. below the ground level as below: By lSl-Medium Gl pipe
Extra for providing masonery enclosure on the top of the earthelectrode of overall size 86.36 cm x 86.36 cm x 46 cm deep(below Ground level) complete with cemented brick work(1:6)of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm withlocking arrangement, Gl reducer including drilling of 46 nos.12 mm dia holes on the Gl pipe
Extra for treatment of soil by using salt & charcoal or coke for plate electrode.
Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with Gl saddles as required and connection to equipments incl.drilling holes, with bolts, nuts, washers etc.
Supplying and fitting-fixing of earth busbar of galvanized (Hot dip) fVS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with Gl bolt,nuts,washers,spacing isolator set etc.as required Length of busbar is 0.5 mtr.
Add. GST@18%
Add. Cess@1%
CHOUDHURY ENTERPRISE (BID ID -5641670)
BEHERA ENTERPRISE (BID ID -5640531)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .