Haryana

Active

Works

Civil Works

Development of New Park at Raja Chowk in Ward No.16 (new),Faridabad.(Recall)

Haryana Government

Faridabad (MC) | Faridabad, Haryana

Amount: ₹50.9 LCloses: 13 Oct 2026Due tomorrow

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published6 Oct 2026
Closes13 Oct 2026
Bid Opening14 Oct 2026

Tender Value

₹50.9 L

EMD Value

₹1.0 L

Closing Date

13 Oct 2026, 6:55 pmDue tomorrow

Tender Inviting Organisation

Name

NITIN KADIAN

Address

Municipal Corporation Faridabad

Work Description

Development of New Park at Raja Chowk in Ward No.16 (new),Faridabad.(Recall)

Tender Information

Tender ID

2026_HRY_552309_1

Reference Number

2026F96DE572 F679 493E B59D 7F1F79D73737284ULB

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Period of Work

250 days

Location

Faridabad (MC)

Source Website

Subscribe to view

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical

RequiredTechnical Bid (.pdf)

Finance

RequiredFinancial Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹1.0 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

6 Oct 2026

Published

6 Oct 2026

Bid Opening

14 Oct 2026

Download Starts

6 Oct 2026

Download Ends

13 Oct 2026

Submission Starts

6 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (15 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Installation charges all items	13	Each	-	-
2	Transportation site to workshop to site	13	Job	-	-
3	P/F Chest press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI-pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from roto-moulde. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used.	1	Each	-	-
4	P/F Seated puller is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm and 25mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used	1	Each	-	-
5	P/F Sky Walker is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. The Handle frame is made of 25mm NB “B” Class GI-pipe. Foot Rod is made from 50x50 MS square pipe of 3mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used.	1	Each	-	-
6	P/F Air Walker is made from IS-1239 “B” Class GI-pipe. The bend pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 25mm NB “C” Class GI-pipe. The Leg frame is made of 32mm NB “B” Class GI-pipe. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick,	1	Each	-	-
7	P/F Horse rider is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and connecting rods is made of 25mm NB “C” Class GIpipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick.	1	Each	-	-
8	P/F Leg press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick	1	Each	-	-
9	P/F Push-up-Bar is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, 25mmx25mmx3mm MS angle. Closing caps are made from top quality LLDPE Material which is of 2mm thick.	1	Each	-	-
10	P/F Sit-up-Board is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. Bench frame is made from 25mm NB “B” Class GI-pipe and MS Perforated Sheet of 2mm thick is welded in bench frame. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick	1	Each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.71 MB

Work Item Documents

BOQ_632163.xls

BOQ • 0.28 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Installation charges all items

Each

Transportation site to workshop to site

Job

P/F Chest press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI-pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from roto-moulde. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used.

Each

P/F Seated puller is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm and 25mm NB “B” Class GI-pipe. The Handle frame and Seat is made of 32mm NB “B” Class GI pipe. Connecting rod is made from 25mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used

Each

P/F Sky Walker is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. The Handle frame is made of 25mm NB “B” Class GI-pipe. Foot Rod is made from 50x50 MS square pipe of 3mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used.

Each

P/F Air Walker is made from IS-1239 “B” Class GI-pipe. The bend pipe is of 80mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 25mm NB “C” Class GI-pipe. The Leg frame is made of 32mm NB “B” Class GI-pipe. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick,

Each

P/F Horse rider is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The Handle frame and connecting rods is made of 25mm NB “C” Class GIpipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick.

Each

P/F Leg press is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. Seat frame is made from 32mm NB “B” Class GI-Pipe. Seat is made from MS Sheet of 2mm thick. For the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick

Each

P/F Push-up-Bar is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 32mm NB “B” Class GI-pipe. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick, 25mmx25mmx3mm MS angle. Closing caps are made from top quality LLDPE Material which is of 2mm thick.

Each

P/F Sit-up-Board is made from IS-1239 “B” Class GI-pipe. The center pipe is of 100mm NB made from “B” Class GI-pipe, and the bottom support is of MS round plate of 250mm Dia and 10mm thick is welded at the bottom of the pipe. The remaining frame is made of 50mm NB “B” Class GI-pipe. Bench frame is made from 25mm NB “B” Class GI-pipe and MS Perforated Sheet of 2mm thick is welded in bench frame. The foundation used for fixing it consist of three equal items i.e. 80mm NB made from “B” class GI-pipe, MS round plate of 250mm Dia and 10mm thick

Each